Re: problem with microsd
Dnia 2012-09-27, czw o godzinie 11:17 +0200, Davide Scaini pisze: Hi all. I asked on shr user list with no luck. I'm using shr-core, I have this problem: the device for the microsd is not created, i.e. /dev/mmcblk0p1 does not exist. [cut] Did you tried with another uSD? AFAIR GTA02 was not able to work with SDHC cards. -- Patryk LeadMan Benderz Linux Registered User #377521 () ascii ribbon campaign - against html e-mail /\ www.asciiribbon.org - against proprietary attachments ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: problem with microsd
mmm... no afair: http://wiki.openmoko.org/wiki/Supported_microSD_cards I have a 8gb sandisk and it should work. I think it's a kernel related problem. When fdisk modifies partition table (as I described in previous mail), it calls ioctl() and then syncronizes again the disks with new partition table... and the nodes are created correctly. Anyway after few minutes the drive goes in read only mode. I'm puzzled. Any other hint? On Fri, Sep 28, 2012 at 8:24 AM, Patryk Benderz patryk.bend...@esp.plwrote: Dnia 2012-09-27, czw o godzinie 11:17 +0200, Davide Scaini pisze: Hi all. I asked on shr user list with no luck. I'm using shr-core, I have this problem: the device for the microsd is not created, i.e. /dev/mmcblk0p1 does not exist. [cut] Did you tried with another uSD? AFAIR GTA02 was not able to work with SDHC cards. -- Patryk LeadMan Benderz Linux Registered User #377521 () ascii ribbon campaign - against html e-mail /\ www.asciiribbon.org - against proprietary attachments ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: problem with microsd
El Friday 28 September 2012 08:24:06 Patryk Benderz va escriure: Did you tried with another uSD? AFAIR GTA02 was not able to work with SDHC cards. GTA02 works with SDHC you may remember Openmoko Bug #2364: Hanging micro sdhc card but I think it works in reccent kernels too see http://lists.openmoko.org/pipermail/openmoko-kernel/2011-October/011353.html ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: problem with microsd
[cut] Any other hint? Just give it a try and check some 2GB uSD. In worst case it will confirm your your belief. -- Patryk LeadMan Benderz Linux Registered User #377521 () ascii ribbon campaign - against html e-mail /\ www.asciiribbon.org - against proprietary attachments ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: problem with microsd
On Thu, 27 Sep 2012 11:17:30 +0200 Davide Scaini dsca...@gmail.com wrote: Hi all. I asked on shr user list with no luck. I'm using shr-core, I have this problem: the device for the microsd is not created, i.e. /dev/mmcblk0p1 does not exist. Do you have any fast fix? This is the problem: root@om-gta02:~# fdisk -l /dev/mmcblk0 Disk /dev/mmcblk0: 7948 MB, 7948206080 bytes 4 heads, 16 sectors/track, 242560 cylinders, total 15523840 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x36c4 Device Boot Start End Blocks Id System /dev/mmcblk0p1204812328959 6163456 83 Linux /dev/mmcblk0p21232896015523839 1597440 82 Linux swap / Solaris root@om-gta02:~# mount -t ext2 /dev/mmcblk0p1 /media/temp/ mount: special device /dev/mmcblk0p1 does not exist see http://wiki.openmoko.org/wiki/Supported_microSD_cards and its paramters (rootwait glamo_mci.sd_max_clk=500 glamo_mci.sd_drive=3 etc...) Denis. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Problems using recent Rogers Wireless (Canada) SIMs in GTA02
On Thu, 27 Sep 2012 07:48:12 +0100 Al Johnson openm...@mazikeen.demon.co.uk wrote: Have you tried the new SIM in any other 2G-only phone? SIMs from 3(UK network) seem to work only in 3G-capable devices. I never looked into how or why, but it's possible Rogers are doing this with new SIMs either by accident or design. On Wednesday 26 September 2012 21:53:14 Pascal Gosselin wrote: In 2010, we were able to take circa mid-2008 Roger Wireless SIMs (Canada) borrowed from an iPhone 3G and get it to work in Android Froyo on the GTA02 850Mhz. Two years later, we decided to add some GPRS reporting capability to our Wi-Flight product which is currently using Wi-Fi only, we are unable to get a carrier registration at the AT command level using two Rogers SIMs (both from 2012, one used in an iPhone 4 and the other in a Samsung Galaxy S II Skyrocket (LTE)). The GSM baseband code was at Moko8 so we had the fix for bug 666. We tried Moko11 but it didn't make a difference. We repeated the same Android Froyo setup and indeed it doesn't work when we try the circa 2012 SIMs. What's your setup exactly? Our product doesn't run on Android, the Froyo stuff was just tried to attempt to replicate something that worked before. I found a working older Rogers full-sized SIM from my GSM-enabled alarm system, which I think it at least 3-4 years old. It worked just fine in a Nexus S and I was able to send an SMS and Edge data from the phone (it's a T-mobile AWS phone so no 3G on Rogers). The conclusion so far is that something has changed in the Rogers SIMs that makes it incompatible with the GTA02. I am wondering if anyone else has encountered this problem. I'd be happy to be able to get a Fido-branded card to work (haven't tried that yet). We've repeated the same issue with a half-dozen GTA02s so we're pretty sure it's not a one-off phone problem. Maybe you could try to debug it with simtrace(the hardware for tracing SIM communications, that is compatible with wireshark 1.8)? However if it's a problem with the modem firmware it would be hard to fix, one may think that there is osmocombb, but *selling* phones with osmocombb preinstalled may not be legal in your jurisdiction(I'm not a lawyer tough...). In that case I guess you would need to switch to another GNU/Linux phone(such as a GTA04, or another phone supported by SHR for instance,but that means that you'll probably have some availability issues(you'll need to find a reliable way to get such phone in the long run...)). Denis. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: problem with microsd
I tried to add those parameters, but nothing new... I will try with another micro sd, if I find one... this one is brand new (dammit!) Thanks for your help, I will stay tuned d ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
