Re: tangogps and qtmoko

2011-05-11 Thread Gianluigi
On Thursday 12 May 2011 03:40:59 Robin Paulson wrote: On 12 May 2011 09:12, Tiago Bortoletto Vaz ti...@debian.org wrote: Try to use window manager in setup. I've added Matchbox also; you'll have the X top-right corner to close application. I've done the same to fix it in my device. It

Re: tangogps and qtmoko

2011-05-09 Thread Gianluigi
On Tuesday 10 May 2011 02:58:19 Robin Paulson wrote: hi, i have the latest qtmoko (35) installed on my freerunner. i also have tanggogps installed, used via QX. the problem is, when i run tango, it only uses 3/4 of the screen then, if i hit 'info' to show the config, etc., that takes up

Re: strange problem with Intenso 4GB SDHC card

2008-08-08 Thread Gianluigi
Alle 01:16, sabato 26 luglio 2008, Thomas B. ha scritto: On Fri, Jul 25, 2008 at 11:44:37PM +0200, AVee wrote: On Friday 25 July 2008 10:54, arne anka wrote: i got a 4 gig card too (can't say if from intenso, have to check the wrapping). my card's boot sector is not erased but -- after

Re: receiving SMS messages

2008-08-07 Thread Gianluigi
Alle 04:04, giovedì 7 agosto 2008, Robert William Hutton ha scritto: 5. In the meantime the network has accepted that the SMS can't be sent, and puts it into some kind of wait queue. Is not possible, after the GSM is fully up, say to the network I'm ready, is something waiting for me? -- We

Re: receiving SMS messages

2008-08-06 Thread Gianluigi
Alle 00:17, mercoledì 6 agosto 2008, Tim Coggins ha scritto: I can confirm this; it's been happening for the last week or so. Tim This is also for me. I use gtk and massages (not all) can be recived after hours or days. My TLC is Vodafone (italy) -- Romulan women are not like Vulcan

Re: dfu-util upload problems

2008-07-22 Thread Gianluigi
Alle 02:50, lunedì 21 luglio 2008, Kevin Squire ha scritto: At least one other person (you?) has indicated a similar problem at http://wiki.openmoko.org/wiki/Pre-Flash_Backup.  Any ideas, anyone? Thanks,    Kevin _ I've same problem. # ./dfu-util -a rootfs -R -U good-rootfs.jffs2

Re: Cleared to start Mass production

2008-06-05 Thread Gianluigi
Alle 17:12, giovedì 5 giugno 2008, steve ha scritto:  The latest update I have from the factory indicates that mass Production ( that means running the SMT line without stopping to check stuff every two seconds) has been CLEARED TO START. So a switch is waiting only to be pushed on for make we