Hi,
Matthias Apitz g...@unixarea.de writes:
I would like todo some charching tests with my special charger (a
minty-boost, http://learn.adafruit.com/minty-boost?view=all ),
is there a simple way with some shell scripting to monitor every minute
or so the current charging rate, voltage etc. of
Hi,
Giacomo 'giotti' Mariani giacomomari...@yahoo.it writes:
wpa_supplicant -Dwext -ieth0
-c/etc/wpa_supplicant/wpa_supplicant-eduroam.conf -B
sleep 30
dhclient eth0
I have two alternative suggestions for you here:
1. Read /usr/share/doc/wpasupplicant/README.Debian and configure it in
Hi David,
dmatthews.org m...@dmatthews.org writes:
Along with Xmonad config, xvkbd tweaks and a bash wrapper for dzen2
I've also added some notes about from-scratch X.org configuration for
gta02, gta04 and about creating a custom Xkb setup.
have you managed to integrate the phoneui stuff?
Hi,
After getting tired enough of my inability to make E17 Illume do what
I wanted, I decided to try another route and prepared a configuration
that I was actually able to fine-tune to my liking, based on simple
to understand and tweak software.
Along with Xmonad config, xvkbd tweaks and a bash
Hi,
On Sun, Dec 23, 2012 at 08:15:22AM +, Dmitry Shalnoff wrote:
thank you very much for answer and all hints and links!
BTW, the bass rework looks very similar to what i was doing, i wonder
who did that :) too bad it looks like i didn't warn everyone strong
enough (though i did put a big
Dmitry Shalnoff shaln...@gmail.com writes:
here is HiRes picture of the patient
http://www.shalnoff.com/pics/freerunner_pcb.JPG
You easily find it by burning fume around it :)
Hi. I think that's the same that happened with another device i did
bass rework for. The large shield is too easy to
On Sun, Dec 23, 2012 at 10:38:56AM +0400, Paul Fertser wrote:
Dmitry Shalnoff shaln...@gmail.com writes:
here is HiRes picture of the patient
http://www.shalnoff.com/pics/freerunner_pcb.JPG
You easily find it by burning fume around it :)
...
found another that was similar enough
I found
Enrico Zini enr...@enricozini.org writes:
This said, oFono does have one very compelling feature: on my N900, it
works reliably. Far better than any version of FSO that I ever managed
to put on my FreeRunner ever did.
If you think that Nokia's N900 firmware is using oFono, you're
wrong. Or do
Hi Christoph,
openm...@pulster.de (Christoph Pulster) writes:
thanks for your advices, which are intelligent ones, really.
You are right, bitterness is what I feel. Why ?
...
Coming to an end with my rant, 50% may be my personal bitterness, but
50% are in some way true. The fail of Openmoko
?
Thanks in advance for your replies and commitment.
Sincerely,
Paul Fertser
--
Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
mailto:fercer...@gmail.com
___
Openmoko community mailing list
community@lists.openmoko.org
http
msoko...@ivan.harhan.org (Michael Sokolov) writes:
What I'm basically saying is that for as long as the recognized /
trusted / respected leaders of this community are acting selfishly and
refusing to share a piece of ware with brothers in need, I feel no
incentive to contribute to this
Denis 'GNUtoo' Carikli gnu...@no-log.org writes:
I've tried it, and on SHR it works out of the box, however only the
kernel supports charging the battery, not the bootloader, so I need the
original battery for flashing it trough the NOR uboot.
To the best of my knowledge, the NOR u-boot
msoko...@ivan.harhan.org (Michael Sokolov) writes:
I am in a disadvantaged position because I have come to the party
late.
You're a very smart fellow indeed, and your reasoning about the holy
grail being in the form of many object files seem to be correct
(though ELF is unlikely there). I can
msoko...@ivan.harhan.org (Michael Sokolov) writes:
Yup, technical aspects such as the Calypso chipset and its firmware.
Before we can start improving the latter, we need to obtain a copy of
whatever at least partially modifiable source the Openmoko company
had.
But why? All OM had were some
msoko...@ivan.harhan.org (Michael Sokolov) writes:
But if they aren't there yet, I will *not* abstain from hacking TI's
original code, assuming that I can succeed in physically laying my
hands on it, however illegal it may be.
What exactly do you want to change in it? Disabling RRLP? Having AT
Hi,
msoko...@ivan.harhan.org (Michael Sokolov) writes:
Hence my question to the community: is the flash wear-out concern I've
just outlined the primary reason for the recommendation of using SD
instead of NAND to hold the OS/distro, or was that recommendation driven
by some other, completely
Hi,
Thanks for sharing the valueable info :)
Tiago Bortoletto Vaz ti...@debian.org writes:
• I was not able to have default Freerunner headset working on an
acceptable quality. Help will be very welcome.
I think the voip-handset state file is supposed to be used with the
handset (i.e.
phifmr phi...@gmail.com writes:
It is for treat a tinnitus. I need to make tailor-made notched
music...and to listen to with hi fi headphones.
Make sure you've got the bass fix[1] (and even with that i can't
promise you hifi headphones would work properly, you'll probably need
other
clemens kirchgatterer clem...@1541.org writes:
I have the same problem. Can you pls report if replacing the chip actually
fixes the moko?
Replacing pcf50633? I'm not sure anyone has ever tried that, it's BGA
iirc. Have you investigated other options?
--
Be free, use free
Ronald Tallent r...@tallent.ws writes:
On Tue, 2011-07-05 at 15:05 +0400, Paul Fertser wrote:
Replacing pcf50633? I'm not sure anyone has ever tried that, it's BGA
iirc. Have you investigated other options?
The purpose of this thread was kind of to discover and explore those
other options
Hi,
Ronald Tallent r...@tallent.ws writes:
So, there's no way to fix this thing? If I need to take it to an
electronics repair shop to get it fixed I can, just need to know what
part(s) will need to be repaired/replaced. Anyone know were I can get
hold of schematics for the mainboard? If it's
openm...@pulster.de (Christoph Pulster) writes:
We were fascinated, yet totally overwhelmed by the shear volume of
videos on the web.
I am bored, yet totally disgusted of the video trash flowting around.
95% is pure waist of livetime, for the other 5% go and meet friends,
paint a picture,
Hi,
On Tue, May 31, 2011 at 03:24:49AM +1000, Philip Rhoades wrote:
I assume you're already using pppd for establishing the connection
from the remote system to some host in the internet that you
control.
No - when I plug the dongle in, I just let NetworkManager find it and
set it up. I
On Tue, May 31, 2011 at 04:40:13AM +1000, Philip Rhoades wrote:
Without CSD the most reasonable option imho would be to keep a persistent
connection over GPRS to some internet host you control and use it as a proxy.
An alternative would be to establish GPRS connection upon an incoming (voice)
Philip Rhoades p...@pricom.com.au writes:
I am wondering if it would be possible to use minicom on the
Freerunner to dial the phone number of the remote dongle, make a
connection
If CSD[1] is available from your provider, then you can do that,
right. If not, all you can do is to write some
Hi,
On Sat, May 28, 2011 at 06:59:33AM +1000, Philip Rhoades wrote:
On 2011-05-28 04:25, Paul Fertser wrote:
Philip Rhoadesp...@pricom.com.au writes:
I am wondering if it would be possible to use minicom on the
Freerunner to dial the phone number of the remote dongle, make a
connection
Alfa21-mobile freerun...@my.is.it writes:
so I can find the unbind here:
root@neo:~# find /sys/bus/ -name '*unbind*'|grep sdi
/sys/bus/platform/drivers/s3c-sdi/unbind
...
how I can check if it's in bind or unbind state?
If ar6000 is listed among the files at the path you mention, it's
binded.
Radek Polak pson...@seznam.cz writes:
On Thursday 26 May 2011 13:01:05 Alfa21-mobile wrote:
and are executables... but I do not know neither if they are called
after a wifi disconnection, nor if after an unbind/bind cycle the
power consumption during stdby returns to the same state like after
Alfa21 freerun...@my.is.it writes:
2011-05-25@00:05 Paul Fertser
Alfa21 freerun...@my.is.it writes:
ah! keep in mind: if you enable wifi at least once in any boot
cycle, your moko will drain more current than usual, also if you
disconnect wifi and put the phone to sleep.
Are you really
Alfa21 freerun...@my.is.it writes:
2011-05-25@23:31 Paul Fertser
Hm, you do not spare too many details, do you :) Are you really sure
the ar6000 module is unbinded when you disable wifi?
sorry, I didn't know which kind of details you meant...
Basically, ``ls /sys/bus/platform/drivers/s3c2440
Alfa21 freerun...@my.is.it writes:
2011-05-24@14:15 Xavier Cremaschi
If you try om utility (from omhacks package) it could have parameter for
enabling fast charge. Then you can edit the Fast charge mode script so
that
it uses om command (and send the result to me so that i can commit
Hi,
On Tue, Mar 29, 2011 at 06:00:22PM +1100, Philip Rhoades wrote:
Philip Rhoadesp...@pricom.com.au writes:
- Even with the dumb battery configuration, the battery charging
animated icon continues after USB (power) disconnection - should that
happen?
Provide uevent files contents for both
Hi,
Philip Rhoades p...@pricom.com.au writes:
- Even with the dumb battery configuration, the battery charging
animated icon continues after USB (power) disconnection - should that
happen?
Provide uevent files contents for both the battery driver and
pcf50633-mbc drivers.
- Using the
Hi,
Philip Rhoades p...@pricom.com.au writes:
My original Neo battery lasts about 3.5 hours from a full charge with
no activity with QtMoko v33. I bought replacement BL-6C batteries but
when I plug either of them in, they appear to be charging (~20 hours)
but when the USB is disconnected the
Hi,
Hrabosh zbyne...@volny.cz writes:
giacomo 'giotti' mariani píše v Út 08. 02. 2011 v 10:40 +0100:
Yes, I really meant bass fix. I have replaced each 1uF cap with 2x 47uF
caps in parallel. They are isolated by heat-shrinking tube and
everything even fit under the metal cover.
It
Hi,
Dr. H. Nikolaus Schaller h...@goldelico.com writes:
time for another update.
...
Current status: the 1.8V is now working but the VDD2 (1.2 V) not.
The TPS chip aborts the power up sequence early.
We could solve that by adding a jump start resistor.
...
Nikolaus, this project is a very
Hi,
Ed Kapitein e...@kapitein.org writes:
I am happily hacking on my FR and was toying with the wolfson.
I happen to notice that in order to get any sound from the earpiece i
had to switch on the Speaker Playback ZC Switch.
This is used to enable/disable Zero Cross detection, i.e. the gain
Benjamin Deering ben_deer...@swissmail.org writes:
I use an allen (hex) wrench to remove them, I am seeking replacements
because I lost one.
FYI i'm using my gta02 as my only daily cell phone for more than a
year without any screws whatsoever.
--
Be free, use free
openm...@pulster.de (Christoph Pulster) writes:
an intelligent marketing idea. My idea on the later is, to point the
finger in the Apple direction and naming the evil by name.
This sounds really cool to me, Christoph. Honestly, i'd prefer to see
more Apple (and Android as well) bashing. But do
Gennady Kupava g...@bsdmn.com writes:
Many gossips flying around about bad fr's audio subsystem quality. I
promised to proove that FR audio subsystem is good, just default
headphones quality below anything.
I thought we did the bassfix on this device, didn't we? That makes
hell of a
Jim Morris m...@e4net.com writes:
Anyway I tried to get my bluetooth headset to work, and I am not
sure exactly what needs to be done to make this work seemlessly.
This [1] page and this guy might help. Also feel free to ping me or
him on irc, we do know some bluetooth tricks :)
Also keep in
Jim Morris m...@e4net.com writes:
Paul Fertser wrote:
This [1] page and this guy might help. Also feel free to ping me or
him on irc, we do know some bluetooth tricks :)
Unfortunately frameworkd and the dbus stuff does not appear to be
relevant for qtmoko.
Some dbus stuff (calls
Hi,
Ed Kapitein e...@kapitein.org writes:
Is there a way to select where to boot from, nand or uSD?
and i need a software choice, no the obvious boot select with the aux
button, which requires physical access to the freerunner.
With Qi you can create a special file in /boot and it will skip
Hi,
Michael, let me take this opportunity to thank you for all the
wonderful opportunities opened by the D-Bus integration in Emacs, it
really rocks :)
On Wed, Aug 18, 2010 at 10:24:05PM +0200, Michael Albinus wrote:
Unfortunately, it’s not currently possible for one emacs
process to
Dr. H. Nikolaus Schaller h...@computer.org writes:
Am 13.08.2010 um 22:35 schrieb steve:
Nikolaus, couldn't you wrap your lines to something more standard (72 or
so ?) Thanks, I like reading your prose, but those long lines are really
irritating.
there are different opinions if the 80 char
Hi,
Dr. H. Nikolaus Schaller h...@goldelico.com writes:
If there is no such RFC, please report bugs for your clients that
don't wrap long (MIME encoded) lines they receive to the width of
the display window.
Nikolaus, thanks for the serious attitude wrt this issue.
My client does wrap long
Gay, John (GE Energy Services, Non-GE) john@ge.com writes:
I've been wanting to try using my freerunner as a serial terminal to
debug servers via serial. I've got a USB-serial adapter that H:1
recognizes and assigns to /dev/ttyUSB0. My problem is, minicom won't run
because the shell screen
Hi,
openm...@pulster.de (Christoph Pulster) writes:
Where can I find a new battery for my Neo 1973?
The Neo1973 and Freerunner share the same battery.
Unfortunately, they do not. gta01 battery is almost the same as Nokia
BL-6C but the average thermistor resistance is 10k (unlike ~60k in
Peter Nijs moko...@depeje.net writes:
find it quite difficult to difficult to find the needed components: 2K2 0402
smd resistor and a small ceramic 100µF smd cap.
It'd be a bit too long for me to send you the parts but i can suggest
using 0603 R (it fits there all right because one side of it
Paul Fertser fercer...@gmail.com writes:
Peter Nijs moko...@depeje.net writes:
find it quite difficult to difficult to find the needed components: 2K2 0402
smd resistor and a small ceramic 100µF smd cap.
It'd be a bit too long for me to send you the parts but i can suggest
using 0603 R
Peter Nijs moko...@depeje.net writes:
Thanks for the tips. I already found them on rs-components (and I have
contacts who can order there). But aren't tantalum cap's polarised? Or is the
mic signal DC? Or is there another reason why this isn't a problem?
They're indeed polarised and it's not
Radek Polak pson...@seznam.cz writes:
On Sunday 06 June 2010 14:08:24 Torfinn Ingolfsen wrote:
Hmm, I don't have a SIM-card in the phone. Is that going to be a problem?
That can be - i tried with SIM and it was working. I also sometimes get this
message when battery is very low - probably
Torfinn Ingolfsen tin...@gmail.com writes:
Where can I find a new battery for my Neo 1973?
It is better if it is cheap, and it must charge in the phone.
So I guess BL-5C's are a no-go.
The easiest option would be to solder a ~12k resistor between ID pin
and the ground right to the backside of
Chuck Norris norris.ch...@mail.ru writes:
Is it possible make FR act as wifi access point?
Which utils can help?
Only ad-hoc. iptables + iwconfig, nothing else needed i think. Set
adhoc before setting ssid.
--
Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
Corey co...@bitworthy.net writes:
So, is it not possible to install qtmoko to nand using qi instead of
u-boot?
Qi doesn't allow to install (read flash to NAND) anything because
it doesn't support DFU. But you always have an option of booting NOR
u-boot to flash whatever you need.
--
Be free,
tomas nackaerts tomas.nackae...@gmail.com writes:
If the ephemiri data is fresh enough (2-4 hours max), the
effect is the same as downloading the data from the internet. Other
than that, there's no agps integration yet afaik.
Don't know why, but i thought this data was useful for a couple of
Torfinn Ingolfsen tin...@gmail.com writes:
On Sun, May 23, 2010 at 6:53 PM, arne anka openm...@ginguppin.de wrote:
what does
/etc/udev/rules.d/70-persistent-net.rules
look like?
Now, this is an interesting file. Here are a few lines:
...
# USB device 0x1457:0x5122 (usb)
Linus Gasser l...@markas-al-nour.org writes:
The new version appears to work fine here (just a quick test so far).
BTW, my Ubuntu laptop (Xubuntu 9.10) exhibits a strange symptom: each
time I connect my FR, the network interface name increases:
eg. it started out with 'eth9' (what happened
Radek Polak pson...@seznam.cz writes:
SHR, and probably others too, have agps enabled by default. So i think it
should be fairly easy to add this. I did a little research and it seems
like all we have to do is to save the latest GPS data to a file when the
GPS is shut down and feed this data
Ben Thompson b...@thompson.org.uk writes:
On Wed, Aug 26, 2009 at 09:46:38AM +0400, Paul Fertser wrote:
I tell you the most nasty bugs are in firmware. Which we don't have
sources for and don't know a way to update anyway. Blame Atheros.
please may you elaborate a bit more?
How kernel
saravanan T saravana...@gmail.com writes:
How can I run SHR in the qemu.
What's your objective, man? Why run SHR in emulator when you can run
it natively on any device (including your PC)? What are you trying to
do and why?
--
Be free, use free (http://www.gnu.org/philosophy/free-sw.html)
to “Paul Fertser
fercer...@gmail.com”
Enjoy and happy hacking! :)
[1]
http://blog.shr-project.org/2010/05/howto-develop-and-debug-the-shr-phone-stack-on-your-desktop.html
--
Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
mailto:fercer...@gmail.com
Neil Jerram neiljer...@googlemail.com writes:
On 6 May 2010 21:59, Paul Fertser fercer...@gmail.com wrote:
I like using Debian on my FR (in fact it is the only system i use as
my daily phone since i bought it) and i decided i want to start
getting all the great improvements and fixes from git
Chuck Norris norris.ch...@mail.ru writes:
sorry for off-listing. I haven't noticed that messanger change
from field :)
In fact it doesn't. I sent mails from my address, just as all
messengers do, to you while keeping all interested parties (ML in this
case) in Cc.
about crystal clearness:
Hi,
I like using Debian on my FR (in fact it is the only system i use as
my daily phone since i bought it) and i decided i want to start
getting all the great improvements and fixes from git again (as i used
to when framework was pure python).
Compiling everything needed natively proved to be a
Bartlomiej Zimon uz...@o2.pl writes:
Bartlomiej Zimon wrote:
I want ask why we not use execution in place?
At the risk of maximizing technical accuracy while minimizing
usefulness of the response, this is of course precisely what
happens when you boot from NOR :-)
Dont know why but my
HansV h...@vanpee.be writes:
OK, I didn't see this is a switch, I thought it was a dropdown
box. Now I can switch it on manually. Still finding out how to start
wifi with wpa-supplicant.
Hard to succeed when you're reluctant to read, eh? ;)
http://wiki.openmoko.org/wiki/FSO_Resources
Chuck Norris norris.ch...@mail.ru writes:
Is it only possible configure bluetooth on linux (bluez4) through
dbus?
Here's the definitive and working guide, i've tested all that steps
myself.
http://wiki.openmoko.org/wiki/Manually_using_Bluetooth#Networking
--
Be free, use free
Paul Wise pa...@bonedaddy.net writes:
My FreeRunner resumes from suspend-to-memory if I remove the headphones
from the headphone socket. Does anyone know if that is configurable or
if the hardware just doesn't allow it to be changed?
Of course it's configurable, but i'm not sure about proper
Kai-Martin k...@familieknaak.de writes:
In SHR WiFi is powered on and off through FSO's Resource handling.This is
usually set to 'auto' so it will be powered up if an app requests the WiFi
resource, and shut down when nothing is requesting it.
Does wmiconfig -i eth0 --power maxperf interfere
Kai-Martin k...@familieknaak.de writes:
Sorry cant help with wifi - I find that mokoconnect and similar gui's
are too flaky - manual is more reliable.
Ok, why not.
I am only half fluent with the necessesary commands. On my
laptop I used to call wpa_supplicant with some fancy config file.
Paul Wise pa...@bonedaddy.net writes:
When I plug headphones all the way in to the headphone socket, only one
of the buds works, but when I don't push it all the way in I get sound
from both buds. Same thing happens in both Debian and SHR. Does anyone
else have this issue with their FreeRunner
Kai-Martin k...@familieknaak.de writes:
Exactly. Just add an appropriate section to wpa_supplicant.conf, it
works for all networks.
Assembling bits and pieces from many sites, I got wifi to work -- manually
with commands through ssh and still with wake-up issues.
Add this one to your
niubee_007 pengning...@gmail.com writes:
can someone elaborate how to make wakeup-on-wlan work?
I tried to look into this and came to following conclusions:
1. hardware-wise, it should work (to the unknown extent, i saw exactly
0 documentation on the chip)
2. to actually give it a try one
Jay Vaughan j...@synth.net writes:
Does anyone have any advice for me on how to get the Freerunner to
work as a USB Host device? I'd like to use it as the main PC
surrounded by USB devices (USBMIDI cable, Powermate) .. is there some
special cable I need, or is this now all easily
Denis Shulyaka shuly...@gmail.com writes:
Please tell me if you can get MIDI working. I tried it myself but
some kernel modules seem to be missing and I couldn't manage to build
them myself due to some dependency problems.
Please describe your problem in details.
--
Be free, use free
Brolin Empey bro...@brolin.be writes:
See the second pin from the left? I assumed it was pin 4 (ID) because
of the pinout images on Wikipedia, but I think it may actually be pin 2
(D-).
I think it is D- and it is broken, so yes, the only option is to
replace the socket it seems...
--
Be
Jan Girlich vollk...@cryptobitch.de writes:
Am Mittwoch, den 03.03.2010, 09:00 +0100 schrieb Erik Andresen:
Would be interested in the Bass-fix.
We'll get that managed, too, if you're in or around Hamburg. I hope
there is as nice documentation for this fix as there is for #1024 and
buzz, b/c
Ben Thompson b...@york.ac.uk writes:
On Sun, Feb 28, 2010 at 01:52:01PM +0200, Timo Juhani Lindfors wrote:
Ben Thompson b...@york.ac.uk writes:
I will see if I can reliably reproduce the problem and submit a bug
report if there isn't one (where should I do this?).
http://bugs.openmoko.org
Dave dave...@gmail.com writes:
Using qtmoko V16, I have found that suspending using the power
button or waking by plugging in the charger guarantee that bluetooth
is killed.
And what do you mean by killed? Does BT adapter disappear from lsusb
list? Or does bluetoothd get confused by something?
Nicola Mfb nicola@gmail.com writes:
On Fri, Feb 26, 2010 at 12:17 PM, Ben Thompson b...@york.ac.uk wrote:
[...]
I think this is a different bug. It happens occasionally with me too,
but it was also there with the old QT libs. Niko - are you aware of
this problem?
If you are talking
Hi,
I've got involved in some wifi configuration recently and so tested FR
with different APs and settings. As a result, several interesting
observations were made, i hope you'll find them useful.
1. Weird SSID bug
Thanks to the hint by Werner i found out that i can never connect to
my WPA+RSN
Bartłomiej Zimoń uz...@o2.pl writes:
Just moded A5 with no bat mod and clamping mod [1]. It works :) and
both Caps are 100uF/4V 1206.
Cool. For the recamping mode you could have used a much smaller
capacitor but i see you found a nice place for this anyway,
congratulations :) For the others
ri...@happyleptic.org writes:
-[ Thu, Jan 28, 2010 at 11:48:01AM +0300, Paul Fertser ]
Your figure is good. #1024 fix saves you about 4-8mA, a considerable
amount during suspend-to-ram, but you won't notice the difference if
you keep the device in idle but not suspended state.
Ok, make
ri...@happyleptic.org writes:
I thought the #1024 fix is only helping while the freerunner is
suspended. For me this fix only changed the current which was consumed
while suspended and extended my standby time by a factor of nearly 2x.
So what do you have in
ri...@happyleptic.org writes:
Can't you stop spamming this list ?
Come on, just add a procmail rule or something if you do not want to
see a nice guy improving!
--
Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
mailto:fercer...@gmail.com
Frederik Sdun frederik.s...@googlemail.com writes:
* joa...@verona.se joa...@verona.se [17.01.2010 07:45]:
Would it be possible to attach a secondary phone over BT to the
Freerunner and controll it with FSO, the same way as the inbuilt phone
device?
I think over bluetooth is not possible.
Iain B. FIndleton ifindle...@videotron.ca writes:
Anybody actually have reliable bluetooth and/or wifi working on the
SHR-U using the .29 kernel from last December?
Yes, bluetooth networking just worked for me. Please refer to
[1]. Unfortunately, pidof trick doesnt't work anymore with the
Tom Yates madhat...@teaparty.net writes:
does anyone out there supply just the handsfree kit that comes with the
stock openmoko (two earpieces, integral mic with cut-off switch and
four-connector 2.5mm jack)?
Beware, with wired headset mic you'll most probably get a serious buzz
problem on
Tony Berth tonybe...@googlemail.com writes:
when I tried to flash my FR with the latest SHR and after the kernel
was successfully installed, I got (somewhere in the middle of the
process):
dfu_download error -110
It's usually suggested to try another usb-cable/port/no hub etc. Also
make sure
Tony Berth tonybe...@googlemail.com writes:
Tony Berth tonybe...@googlemail.com writes:
when I tried to flash my FR with the latest SHR and after the kernel
was successfully installed, I got (somewhere in the middle of the
process):
dfu_download error -110
On Fri, Jan 08, 2010 at 10:29:31PM +0200, Tony Berth wrote:
Tony Berth [2]tonybe...@googlemail.com writes:
Tony Berth [3]tonybe...@googlemail.com writes:
when I tried to flash my FR with the latest SHR and after the kernel
was successfully installed, I got (somewhere
Al Johnson openm...@mazikeen.demon.co.uk writes:
I only know about Android needing forked Qi. Which other distro also
requires you to have custom bootloader?
I guess Android only needs a forked Qi because it needed different boot
parameters, and Qi can't read them from file when booting
-= Apertum =- i...@apertum.it writes:
The fix will remove that buzz but won't fix other issues
like rustling, echo or low volume. Those issues can mostly be
addressed with
software.
The same happened to me, but i didn't find a viable software
cnfiguration to use the fr as a phone. What
-= Apertum =- i...@apertum.it writes:
And no one can tell what hardware revisions
affected. Inability to get the handset speaker emit loud sound is a
clear sign. Just short those useless caps (0402 size iirc).
Thanks a lot for the info.
And where is exactly located these caps, how to
Torfinn Ingolfsen tin...@gmail.com writes:
On Thu, Dec 31, 2009 at 1:51 AM, Al Johnson openm...@mazikeen.demon.co.uk
wrote:
I guess Android only needs a forked Qi because it needed different boot
parameters, and Qi can't read them from file when booting from NAND.
It makes me
Rashid r.kra...@tu-bs.de writes:
Is there an easy way to encrypt the whole disk (except /boot)?
Like in Ubuntu Alternate the install option install to encrypted LVM?
Or will you have to do it manualy by many complicated console
commands?
No FR distro comes with something like that. OTOH it's
Ben Wong lists.openmoko@wongs.net writes:
By the way, the slowest part of the process was rebooting the
FreeRunner between each SIM. I didn't want to risk my FreeRunner by
hot-swapping the SIM (and SD card since that's in the way). Does
anyone know if it would have been safe to do that?
Petr Vanek van...@penguin.cz writes:
seems like my bt stopped working. no matter the distro,
fso running or not, even turning it on manually i get no device shown.
echo 1 /sys/bus/platform/devices/neo1973-pm-bt.0/power_on
echo 0 /sys/bus/platform/devices/neo1973-pm-bt.0/reset
Al Johnson openm...@mazikeen.demon.co.uk writes:
On Monday 09 November 2009, Eric Smith wrote:
Meanwhile, I want to use the freerunner as a WIFI connected
SIP client. No need to make cellular calls or do *anything*
else than VOIP.
Your battery won't last long in this case because you can't
1 - 100 of 472 matches
Mail list logo
