Hi,
I am trying to compile the openwrt for the openmoko.
It seems that the tele.edje file (of paroli) is missing from the
sources, where can I find it?
If I will not include the paroli package, I can install the openwrt on
my freerunner, but the screen
timeout every 2-3 sec, is there any way to
Yeap.. I noticed it 2-3 times..
rusolis wrote:
It often happens to me that when I turn on the phone, Qi turns it off
again
after a few seconds, when the boot process has already started. It only
boots normally when I turn it on the second time. Might after battery
removal. Anybody else
Hi,
Nice work, but the qtgps is not working with the 4.4.2.
I can install it without problems, but when I am trying to run it, it
crashes (Application terminated due to
application error).
Rgrds
Chris
--
View this message in context:
interesting... I though that QTE was dead/killed by nokia.
--
View this message in context:
http://n2.nabble.com/Sesca-ample-tp2341508p2343717.html
Sent from the Openmoko Community mailing list archive at Nabble.com.
___
Openmoko community mailing
Hi,
I was looking for a screen protection , so I contacted Brando (its a company
that makes
screen protection sheets for various PDAs), they are really good, I have a
screen protection from them
on my Axim X51v. So far its almost 2 years of everyday abuse and this
protection is still like new!
Ok, I think it was a typo (900Mhz).. unless you o/clocked it ;-), right?
Dr. H. Nikolaus Schaller wrote:
* Neo Freerunner GTA02 900MHz (incl. headset, pouch and laser-pen):
.
--
View this message in context:
yeap. this version is ok, but NOT only the wifi has problem..
try the voice notes for example, its impossible to make a voice note
(incompatibility ??)
chris
HouYu Li wrote:
Hi, Chris, I am using QTE 4.4.2 with the testing kernel from
http://downloads.openmoko.org/testing/daily. It's
Hi,
I have the QT on the rootfs, so I put the FSO on a uSD (I have installed the
QI).
ITS impossible to boot from the uSD, QI just seems to ignore the FSO and it
just boots to NAND kernel..
I HAVE no problems with a similar uSD (has FDOM) but only with the FSO..
Chris
--
View this message in
strange.. I get an glamo33362.slow_memory unknown boot option
should I upgrade the QI?
chris
Andy Green wrote:
glamo3362.slow_memory=1
--
View this message in context:
http://n2.nabble.com/Freesmartphone.org-Milestone-5-%27Calling-All-Stations%27-Release-tp2261004p2265242.html
opps.. the message saye glamo3362.slow_memory NOT glamo33362 as i wrote!
Chris Syntichakis wrote:
strange.. I get an glamo33362.slow_memory unknown boot option
should I upgrade the QI?
chris
Andy Green wrote:
glamo3362.slow_memory=1
--
View this message
hi,
Even there is 4.4.3... there are no applications around.. :-(
--
View this message in context:
http://n2.nabble.com/Qt-Extended-update---tp2215762p2257919.html
Sent from the Openmoko Community mailing list archive at Nabble.com.
___
Openmoko
Hi,
I used so far the uImage-gta02-gc7283981_mwester-stable.bin , it works ok ,
except the battery icon animates like is being charged (this happens when I
boot the FR, I could fix this, by connecting the charger for 1-2 sec).
Today, I tried the
Hi,
I used the nanddump in order to make a backup of my rootfs. As I see it
produced a 256MB file on my uSD card. (and the dump time was very quick
indeed).
I suppose that I can use this file with the nandwrite in the future? I mean
if this way of backup the rootfs is reliable
chris
--
As the title says..
I cannot scroll the left/right anymore..
Chris
--
View this message in context:
http://n2.nabble.com/Illume-top-shelf%2C-lost-left-right-arrows..-tp2234019p2234019.html
Sent from the Openmoko Community mailing list archive at Nabble.com.
Hi,
I see.. Today I tested the card with a Nokia 1110i , it said card
rejected, then I did a test with a samsung c170 and I got the message SIM
crashed (LOL)
Thanx for the tip about O2..
chris
As far as I'm aware (Hutchison 3G) - Three - is UMTS 2100 _only_ and won't
work with 2G phones
btw.. I am unable to ssh (from my linux box) to the SHR ..
it works when the FR has the FDOM of the hackable1 , but not on SHR.. (i am
using the unstable version)
chris
--
View this message in context:
http://n2.nabble.com/SHR-Unstable-tp2202729p2227042.html
Sent from the Openmoko Community
hi,
GPS works ok (takes arounf 4min to fix)..
also. (as I m flasing a lot the FR in order to try the distros) i reflashed
the FR again with SHR(unstable),
(I flashed it to FDOM, then again back to SHR)
now I see that the FR is somewhat .. slow for example: the applications
take some time
I know the low handset volume is mentioned on the wiki too, but is there
any patch/solution?
I out the alsa setting to 127 (the high value) but I am not too happy...
Chris
--
View this message in context:
http://n2.nabble.com/handset-volume%2C%2C-tp2229335p2229335.html
Sent from the Openmoko
Hi,
How can I activate the GPS with the SHR?
I open the tangoGPS but I got no info if the gps is on or getting data..
Chris
--
View this message in context:
http://n2.nabble.com/SHR-Unstable-tp2202729p2219355.html
Sent from the Openmoko Community mailing list archive at Nabble.com.
Thanks, I did it, but I see no activity..
Maybe i have to search the wiki how to debug it.
BTW Bluetooth has a bug. I can activate it, but when I put ON the visibility
slider, it goes back to OFF.
chris
Johny Tenfinger wrote:
On Mon, Jan 26, 2009 at 18:36, Chris Syntichakis ch...@c-64
Hi,
As I see the SIM from 3mobile (UK) is not working with the GTA02v6 (running
SHR unstable).
Should I run any debugging tests (just for your info..)?
If so, what can I do?
Chris
--
View this message in context:
err.. you mean the gsm firmware? no.. should I put this?
chris
Sargun Dhillon wrote:
I assume you've put moko10 on there?
--
View this message in context:
http://n2.nabble.com/what-tests-for-%28non-working%29-3G-SIM--tp2220544p2220693.html
Sent from the Openmoko Community mailing
Hi,
I am interested to get the Freerunner, but I want at first to check it on
the emulator.
So far I managed to compile the qemu emulator (under Ubuntu 8.10) without
any error.
But I have one problem.. the emulator starts , I choose the boot option
then it shows the slash screen and the boot
, Gaël HERMET mail...@superzell.fr wrote:
Chris Syntichakis a écrit :
Hi,
I am interested to get the Freerunner, but I want at first to check it
on the emulator.
So far I managed to compile the qemu emulator (under Ubuntu 8.10)
without any error.
But I have one problem
still no luck..
the emulator goes to boot screen again and again..
nevermind..
thanx
chris
On Mon, Jan 19, 2009 at 2:44 PM, Gaël HERMET mail...@superzell.fr wrote:
arne anka a écrit :
is the emulator still supported?
___
Openmoko community
Did you try to leave the phone on the charger while the GSM module is off?
On Mon, Jan 19, 2009 at 9:28 PM, Leonti Bielski prishe...@gmail.com wrote:
I understand it, but why GSM dries _battery_ while connected? Why it
is not possible to switch power source to usb completely?
When I take my
26 matches
Mail list logo