On Tue, Jan 13, 2009 at 6:01 AM, Peter Nijs pe...@familienijs.be wrote:
Sadly, this doesn't work on my suse (/etc/sysconfig/...) based system.
depeje
On Thursday 08 January 2009 12:58:09 Thomas Otterbein wrote:
FYI:
On my kubuntu (ubuntu with KDE installed by default) using the KDE
NetworkManager I followed the advices on
http://wiki.openmoko.org/wiki/USB_Networking#Debian.2C_Ubuntu_and_others
but insereted auto usb0 into /etc/network/interfaces as suggested by
arne. It looks now like that:
auto lo
iface lo inet loopback
# freerunner
auto usb0
allow-hotplug usb0
iface usb0 inet static
address 192.168.0.200
netmask 255.255.255.192
post-up /etc/network/freerunner start
pre-down /etc/network/freerunner stop
After a reboot (NetworkManager did not want to play well i.e. did not adopt
to the changes) I get Device usb0: unmanaged and everything works as
expected: My FR get's configured by /etc/network/freerunner and my
(W)LAN-connections a correctly handled by NetworkManager.
I guess this solution solves the issue for Ubuntu and all it's derivates
too. Probably for all KDE-Installations as it seems that the key is to make
the NetworkManager ignore the usb0-Interface.
Regards
thomas
Greetings!
I have Debian lenny on a 686 and for the record, I do use the KDE
for my window manager. I doubt KDE has any effect on the kernel level
networking. That said, I am open to learning.
I put this stanza in my /etc/network/interfaces file, to wit:
allow-hotplug usb0
iface usb0 inet static
address 192.168.0.200
netmask 255.255.255.0
I did not include the auto usb0 because I don't always have my
FreeRunner (gta02, Date Code: 20070731) connected via the USB cable.
Now, then, when I boot the desktop box, arno-iptables-firewall
complains about usb0 not being there yet. Then, when I do boot my
FreeRunner and connect the USB cable, I find I have an interface with
the appropriate address automatically setup for me. Here is the output
of a series of commands, before and after connecting:
BEFORE:
f...@irad:~$ ip link show
1: lo: LOOPBACK,UP,LOWER_UP mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: BROADCAST,MULTICAST,UP,LOWER_UP mtu 1500 qdisc pfifo_fast
state UP qlen 1000
link/ether 00:11:11:36:c9:b8 brd ff:ff:ff:ff:ff:ff
f...@irad:~$ ip addr show
1: lo: LOOPBACK,UP,LOWER_UP mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: BROADCAST,MULTICAST,UP,LOWER_UP mtu 1500 qdisc pfifo_fast
state UP qlen 1000
link/ether 00:11:11:36:c9:b8 brd ff:ff:ff:ff:ff:ff
inet 192.168.35.11/24 brd 192.168.35.255 scope global eth0
inet6 fe80::211:11ff:fe36:c9b8/64 scope link
valid_lft forever preferred_lft forever
AFTER:
f...@irad:~$ ip link show
1: lo: LOOPBACK,UP,LOWER_UP mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: BROADCAST,MULTICAST,UP,LOWER_UP mtu 1500 qdisc pfifo_fast
state UP qlen 1000
link/ether 00:11:11:36:c9:b8 brd ff:ff:ff:ff:ff:ff
4: usb0: BROADCAST,MULTICAST,UP,LOWER_UP mtu 1500 qdisc pfifo_fast
state UNKNOWN qlen 1000
link/ether fa:b5:c2:e2:09:ea brd ff:ff:ff:ff:ff:ff
f...@irad:~$ ip addr show
1: lo: LOOPBACK,UP,LOWER_UP mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: BROADCAST,MULTICAST,UP,LOWER_UP mtu 1500 qdisc pfifo_fast
state UP qlen 1000
link/ether 00:11:11:36:c9:b8 brd ff:ff:ff:ff:ff:ff
inet 192.168.35.11/24 brd 192.168.35.255 scope global eth0
inet6 fe80::211:11ff:fe36:c9b8/64 scope link
valid_lft forever preferred_lft forever
4: usb0: BROADCAST,MULTICAST,UP,LOWER_UP mtu 1500 qdisc pfifo_fast
state UNKNOWN qlen 1000
link/ether fa:b5:c2:e2:09:ea brd ff:ff:ff:ff:ff:ff
inet 192.168.0.200/24 brd 192.168.0.255 scope global usb0
inet6 fe80::f8b5:c2ff:fee2:9ea/64 scope link
valid_lft forever preferred_lft forever
I use arno-iptables-firewall to set up my firewall and nat routing
from the usb0 interface through my regular eth0 connection to my local
router and Internet connection. I am delighted that this hotplug
thingy works.
Cheerio!
--
Fielder George Dowding, KL7FHX
dba Iceworm Enterprises
Debian GNU/Linux Lenny
User Number 269482
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community