A few comments inside:
Pascal Gosselin píše v Čt 07. 02. 2013 v 08:36 -0500:
Yesterday I was able to confirm that the installation of the Golden
Delicious NavBoard V3 very seriously degrades the performance of GPS
when using the built-in GPS antenna. Getting a 3D fix is taking over 20
Jiří Pinkava píše v Čt 07. 02. 2013 v 18:18 +0100:
Dne 7.2.2013 18:00, Hrabosh napsal(a):
A few comments inside:
Pascal Gosselin píše v Čt 07. 02. 2013 v 08:36 -0500:
Yesterday I was able to confirm that the installation of the Golden
Delicious NavBoard V3 very seriously degrades
The keyboard seems nice and usefull. Are you planning to add Fx (F1-F12)
keys too? I was always missing them when I was using mc on FR.
Z.
robin píše v St 09. 05. 2012 v 21:29 +:
great work! I am looking forward to updating qtmoko!!
I don't know too much about virtual keyboards but I
Frank píše v Po 09. 04. 2012 v 10:02 +0200:
Am 09.04.2012 08:59, schrieb Matthias Apitz:
When I remove the battery from my FR, for example to change the SIM, it
looses now(?) the date in hwclock and starts with 01.01.2000; I have to
set the date and time again with
...
matthias
On Monday 05 of March 2012 10:09:11 Radek Polak wrote:
On Sunday 04 March 2012 23:14:36 Andrey Mitroshin wrote:
Hello,
Is there some application for qtmoko to lock the device so nobody can
get
personal information from the device in the case device being lost or
stolen?
No - i think
On Thursday 01 of March 2012 23:59:39 Timo Juhani Lindfors wrote:
Fox Mulder quakem...@gmx.net writes:
You can just install latest eagle 6.1 (win, linux, mac) and use it
with light license for free which limits to 100x80mm board size and 2
layers. This freeware version exists as long as i
On Monday 27 of February 2012 08:51:32 Radek Polak wrote:
On Thursday 23 February 2012 20:32:38 Hrabosh wrote:
Hi All,
anyone knows where to set what partition (or directory) should be
visible
when FR is connected to the PC as an USB storage device?
If I plug my FR
for help !
Hrabosh
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
+1
Thank you, :-)
On Monday 05 of December 2011 13:01:16 Giacomo 'giotti' Mariani wrote:
On 12/03/2011 12:00 PM, community-requ...@lists.openmoko.org wrote:
thanks (as ususal) for your great work. Yes, please do a GTA02
release if possible. Especially the keyboard was one reason why
My whole system runs from the card.
I don't use internal memory for nothing but some dated QtMoko for the
case of the card (or system on the card) failure. (I use my FR as daily
and the only phone).
Hrabosh
Xavier Cremaschi píše v Pá 05. 08. 2011 v 19:01 +0200:
Hi folks,
my operating
and + - icons. If you
managed to get ETA time, trip length, next turn, etc. information on the
screen, could you please share your navit.xml?
Thanks, Hrabosh
Frank píše v Pá 05. 08. 2011 v 20:47 +0200:
Hallo,
I try to run navit on my freerunner.
- QTmoko v35
- navit Version: 0.2.0~svn3501+dfsg.1-1
I
Patryk Benderz píše v Čt 04. 08. 2011 v 10:02 +0200:
[cut]
I left it on the windowsill with battery removed (but was too afraid
to open the case). Do yoy think it was enough?
definitely not. You need to open the case and clean the residue.
Especially if the water was not clean (like from a
Alexander Lehner píše v Čt 04. 08. 2011 v 23:21 +0200:
On Thu, 4 Aug 2011, Hrabosh wrote:
Patryk Benderz pí?e v ?t 04. 08. 2011 v 10:02 +0200:
[cut]
I left it on the windowsill with battery removed (but was too afraid
to open the case). Do yoy think it was enough?
definitely
, and after a few days of drying, it seems
to boot properly both from NAND menu and plain power-button method.
How were you drying it?
Hrabosh
The problem is, the screen goes gradually white at some points during boot
(but not on the SHR-Today screen, where the screen shows distorted copies
Matthias Apitz píše v Čt 28. 07. 2011 v 21:57 +0200:
El día Thursday, July 28, 2011 a las 12:33:33PM -0700, Alishams Hassam
escribió:
2008.9 is *very* dated. Try qtmoko or SHR- both offer a lock, but by
default it's a simple slider- I've never had that accidentally fail. I
I know that
QtMoko v35.
Hrabosh
Timo Juhani Lindfors píše v Út 26. 07. 2011 v 11:00 +0300:
Hrabosh zbyne...@volny.cz writes:
root@Holly:~# /etc/myscripts/simple-agent hci0 D2:2C:26:BF:F8:83
RequestPinCode (/org/bluez/937/hci0/dev_D2_2C_26_BF_F8_83)
Enter PIN Code:
Creating device failed
to my phone?
BTW... keyboard works fine with my laptop.
Thank you,
Hrabosh
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
I've just tryied to dump the BT traffic and it seems that the keyboard
is sending as expected.
See one line from the dump: ^D^W^���,�^D^@^@^@^@^@^@^@^@^@^@^@^@
- those four zeroes are the PIN.
How come that simple-agent refuses to pair the device??
Hrabosh
Hrabosh píše v Út 26
while pressing buttons on my keyboard.
But If I open terminal or new message dialog, I can't see any letters
while typing on the keyboard.
Thanks ,
Hrabosh
Al Johnson píše v Po 02. 05. 2011 v 12:41 +0100:
An alternative could be the one from the wiki:
http://wiki.openmoko.org/wiki
it
got frozen.
Any ideas what is wrong or where to start with troubleshooting?
BTW... connection between laptop and FR was done via USB cable or ad-hoc
WiFi connection with no influence on above described.
Thanks, Hrabosh
___
Openmoko community mailing
-charger connected to power supply with
current measurement.
Thanks, Hrabosh
Timo Juhani Lindfors píše v Po 30. 05. 2011 v 23:36 +0300:
Hrabosh zbyne...@volny.cz writes:
om usb seems to work. The only disadvantage is that I!m not able to set
charging current to 1A.
How does that fail
Oh, sorry. QtMoko v35, kernel 2.6.34-qtmoko
om usb seems to work. The only disadvantage is that I!m not able to set
charging current to 1A.
Thanks for your help,
Hrabosh
Timo Juhani Lindfors píše v Ne 29. 05. 2011 v 23:48 +0300:
Hrabosh zbyne...@volny.cz writes:
does anyone know how
Hello all,
does anyone know how to force charge mode on Freerunner? I've found some
information on how to force fast charging mode, but these HOWTOs are
usually refering to files that do not exist on my FreeRunner.
TThanks,
Hrabosh
.
Earlier this week my phone started not report incoming messages by sound
and now I have to restart it to get the messages.
Do these two probles have something in common? Is there any recomemnded
way how to troubleshoot it?
Thanks, Hrabosh
Philip Rhoades píše v Po 16. 05. 2011 v 18:39 +1000
Well, I can see some improvement in BT since v34. On v34 I had to
connect my handsfree several times since it actually got connected.
v35 gets connected for the first time everytime (...so far).
... by handsfree I mean LG LCF800 car radio.
Hrabosh
Radek Polak píše v Út 12. 04. 2011 v 08:55
Radek Polak píše v Po 11. 04. 2011 v 13:28 +0200:
On Sunday 10 April 2011 19:36:00 Hrabosh wrote:
Then I installed Xglamo and Navit seems to run, but it is bigger than
the screen (I can!t see part of the Navit keyboard, etc.) and I don!t
have any Navit icon in QX.
Please check QX-Menu
Radek Polak píše v Po 11. 04. 2011 v 10:13 +0200:
On Saturday 09 April 2011 18:27:51 Jens Seidel wrote:
My observations:
* SMS are recieved after reboot only (wasn't this fixed long time
ago?)
I have fixed this bug long time ago. But maybe there is another one with same
If you are connected via SSH, you need to set DISPLAY variable first.
Something like:
root@neo:~# DISPLAY=:0.0 navit
may work...
Hrabosh
Carsten Gerlach píše v Ne 10. 04. 2011 v 11:10 +0200:
Hello,
I have the same problems as Sven, so sorry for hijacking this thread.
Am Samstag
Sven Hartrumpf píše v So 09. 04. 2011 v 12:11 +0200:
Hi.
Fri, 08 Apr 2011 21:26:31 +0200, pini wrote:
I am trying Navit for the first time and followed these instructions:
http://wiki.openmoko.org/wiki/QtMoko#Navit_Installation
Works fine, but after the suggested reboot, I just see
bug anyways.
I'm pretty shure it was not working before ... I'm still using v33 and
FreeRunner is not re-establishing bluetooth connection afer waking up
from suspend.
Hrabosh
[1] http://qtmoko.sourceforge.net/debian/linux-2.6-qtmoko_v34-1.dsc
Great job!
FYI: I've just installed Qt Creator and set up git and stuff so be ready
for stupid questions :-) I'm going to write simple app to monitor
battery (set charging current, check battery state etc.).
Hrabosh
Radek Polak píše v Pá 04. 03. 2011 v 07:37 +0100:
Hi,
i have uploaded new
Do you have libjpeg62 installed?
If not, try to apt-get it.
Zb.
Thomas Franck píše v Po 21. 02. 2011 v 21:46 +0100:
Hi..
Any idea why none of the pictures (jpg / png) that I have on MMC can be
displayed? the Mediaviewer finds them but can't show..
Screenshots I've taken are saved on
HAve a look at:
/home/root/Settings/Trolltech/qpe.conf
there is a section called Messages with counters of missed SMSs,
MMS...setting E-mail counter to 0 should help.
Zb.
Thomas Franck píše v Ne 20. 02. 2011 v 11:05 +0100:
Hello everyone!
Recently I installed QtMoko v31 and I'm
cyberesp...@cyberesprit.fr píše v Po 14. 02. 2011 v 16:43 +0100:
It's not FaenGO but FaenQO.. ^^
Oh, I'm sorry.
Zb.
Regards!
On Sun, 13 Feb 2011 19:55:32 +0100, Hrabosh wrote:
I saw packages like asthromod theme, faengo theme and finximod theme in
my package manager
I saw packages like asthromod theme, faengo theme and finximod theme in
my package manager, but installation always failed.
Package was downloaded, then please wait, then Install Error:
Fanego-theme: Invalid package, contact packge supplier
Zb.
Radek Polak píše v St 09. 02. 2011 v 14:58
giacomo 'giotti' mariani píše v Út 08. 02. 2011 v 10:40 +0100:
Yes, I really meant bass fix. I have replaced each 1uF cap with 2x 47uF
caps in parallel. They are isolated by heat-shrinking tube and
everything even fit under the metal cover.
It really helped a lot, no problem using my FR
Ugo Raffaele Piemontese píše v Čt 10. 02. 2011 v 11:50 +0100:
Il 10/02/2011 09:24, Radek Polak ha scritto:
On Wednesday 09 February 2011 18:28:48 Timo Juhani Lindfors wrote:
This is http://docs.openmoko.org/trac/ticket/2264 which has been
worked around 4 months ago. Nobody has complained
giacomo 'giotti' mariani píše v Po 07. 02. 2011 v 11:49 +0100:
On 02/07/2011 10:32, community-requ...@lists.openmoko.org wrote:
Speaking about widgets, ideas, and i think it may be good idea to
replace battery icon with number with mA*h, add up current_now, replace
GSM signal strength with
://wiki.openmoko.org/wiki/Buzz_Fix ?
2011/2/6 Hrabosh zbyne...@volny.cz:
I was doing bass-fix to my Freerunner today so I did the the same
measurement with generator again. I run Voice notes and set the
generator so that the amplitude was simmilar to the amplitude of voice,
captured
Radek Polak píše v Po 07. 02. 2011 v 06:58 +0100:
On Monday 07 February 2011 00:54:37 Hrabosh wrote:
I was trying to run NAvit and QX asked me whether to install Xorg server
or Xglamo. I did choose Xorg server ...
... when R(apt)or finished installation I was trying to run Navit
giacomo 'giotti' mariani píše v Po 07. 02. 2011 v 11:49 +0100:
On 02/07/2011 10:32, community-requ...@lists.openmoko.org wrote:
Speaking about widgets, ideas, and i think it may be good idea to
replace battery icon with number with mA*h, add up current_now, replace
GSM signal strength with
Nice work!
Is there any How-to-write-drivers-for-I2C-devices-connected-to-FR guide?
Zb.
Rui Miguel Silva Seabra píše v Pá 04. 02. 2011 v 15:01 +:
Em 04-02-2011 14:19, Al Johnson escreveu:
On Friday 04 February 2011, Benjamin Deering wrote:
Al Johnson píše v Pá 04. 02. 2011 v 13:46 +:
How did you pick 0.5mV as a suitable input amplitude? Measurement of peaks
when talking?
It was completely wrong! I did some internet search and found that
micropohone like that in FR usually produce signal with amplitude in
tens of mV. I
Hi,
I replaced my v31 by v32 a few days ago. BT seems to run, although I
hear nothing in my handsfree set. But it may be just wrong volume
settings. But file transfer, etc. works fine.
I was trying to run NAvit and QX asked me whether to install Xorg server
or Xglamo. I did choose Xorg server
Al Johnson píše v Pá 21. 01. 2011 v 10:34 +:
On Friday 21 January 2011, Hrabosh wrote:
Hi guys,
yesterday I opened my freerunner to check whether mine FR is affected by
R3004 issue [1].
It was, I put a piece of wire there instead of those two caps and volume
got better!
I
Petr Vanek píše v So 22. 01. 2011 v 05:51 +0800:
On Fri, 21 Jan 2011 07:32:40 +0100
Hrabosh zbyne...@volny.cz (H) wrote:
But ... when I was dismounting the phone, I dammaged the bluetooth
module. The module itself may be OK, but the flex cable is torn off.
ahoy,
zdar!
the flexible
I would appreciate two little improvements/changes.
- 3.5mm 3 way jack instead of 2.5mm 4 way.
- LEDs driven by external ICs, so they would be able to lit eve if FR is
in suspend. Im planning (- which means that it may not even
happen :-) ) to drive LEDs by I2C drivers, or to add some latch
Dr. H. Nikolaus Schaller píše v Čt 03. 02. 2011 v 22:18 +0100:
Am 03.02.2011 um 23:09 schrieb Hrabosh:
I would appreciate two little improvements/changes.
- 3.5mm 3 way jack instead of 2.5mm 4 way.
Unfortunately there is no space in the GTA case. You have to get rid
Hi guys,
yesterday I opened my freerunner to check whether mine FR is affected by
R3004 issue [1].
It was, I put a piece of wire there instead of those two caps and volume
got better!
I have also connected sine wave from generator to the WD8753 mic input
and cheched it on the WD8753's output
Sorry:
[1]
http://lists.openmoko.org/pipermail/community/2009-August/052914.html
Hrabosh píše v Pá 21. 01. 2011 v 07:32 +0100:
Hi guys,
yesterday I opened my freerunner to check whether mine FR is affected by
R3004 issue [1].
It was, I put a piece of wire there instead of those two
Hi All,
I really liked when my old Simenes M65 turned on red LEDs on its side
when SMS was received or I had a missed call.
I was missing this on FR so I wrote a simple script to do that
I added:
CheckForMissed
to my /etc/rc.local to run it automatically when phone starts.
The only
Radek Polak píše v Út 11. 01. 2011 v 22:20 +0100:
Hrabosh wrote:
I set the controls as you wrote and made a call to test it.
I found out that if my phone is ringing and I press Answer button, the
call is not answered, but dropped! After cca 1s, person who is calling
gets busy tone
.
Linus Gasser píše v St 05. 01. 2011 v 20:59 +0100:
Le 31.12.10 01:05, Hrabosh a écrit :
9/ People I call with are complaining about bad sound quality. Did it
happen to any of you?
For me it was enough to use the following settings in NeoControl:
Playback: 125
Sidetone: 3
Mic2: 1
I
W. B. Kranendonk píše v Po 10. 01. 2011 v 06:23 -0800:
--- On Mon, 1/10/11, Hrabosh zbyne...@volny.cz wrote:
do not rely on QtMoko's alarm to wake you up :-)
It was not -by coincidence- the first or second of January? It seems to be a
common problem with design(ers) phones ;-)
No :-) I
Hello,
do not rely on QtMoko's alarm to wake you up :-)
I set the alarm and switched the phone off. When the time came the phone
switched itself on, the alarm bell was shown on the screen and the phone
was vibrating but with NO SOUND !!
If I did the same, but suspend (by short power
BTW ... mine Eyepiece did ask for some aditional libraries on the first
run and then succesfully apt-got them.
Zb.
Radek Polak píše v St 05. 01. 2011 v 10:34 +0100:
Nashvin Gangaram wrote:
Hi Radek
Everything's working great in QtMoko v31... except for Eyepiece.
I get an error:
Thanks for reply. Please see my notes below..
Radek Polak píše v So 01. 01. 2011 v 12:14 +0100:
Hrabosh wrote:
Hello guys,
I got my FreeRunner few weeks ago and since that I'm having fun
discovering it :-)
I am having this fun already for 2 years, Freerunner is certainly best
Hrabosh zbyne...@volny.cz:
Hello guys,
I got my FreeRunner few weeks ago and since that I'm having fun
discovering it :-)
Hi and welcome to Openmoko community!
9/ People I call with are complaining about bad sound quality. Did it
happen to any of you?
Do people on other side
Thank you ! Please see my comments inside...
Alishams Hassam píše v Čt 30. 12. 2010 v 18:04 -0800:
On Thursday 30 December 2010 16:05:03 Hrabosh wrote:
1/ USB Host is not working in v30, v31 (in v26 is). Dmesg says unable
to enumerate device. I was trying to connect USB flash drive, BT
Well done !
As to the keyboard: I really appreciate having arrow keys there (because
of command history in Terminal).
If you hit the very left key in the second row, another keys
(end,home,arrows..) shows up - but the same keys ale already in the
default keyboard, so now they are present
Hello guys,
I got my FreeRunner few weeks ago and since that I'm having fun
discovering it :-)
I had been trying OM, SHR, Debian, Android, QtMoko and decided to stay
with Qtmoko. I have v26,v30 and now v31 installed on several uSD cards
(v31 is in NAND memory).
Although QtMoko seems
61 matches
Mail list logo
