Re: [Om2008.9] FR switches on and boots by its own
According to this ticket: https://docs.openmoko.org/trac/ticket/1822 the FR does not wake up on alarm. Mine never wakes up on alarm. Neither from suspend nor when it's off. Michael Timo Juhani Lindfors schrieb: Matthias Apitz g...@unixarea.de writes: disable for Saturday Sunday (in the settings); why the rtc brings up even in this case the FR? Can you see that it is disabled on those days from /sys or /proc somewhere? I have not used the alarm/settings app you talk about. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Bounties?
I'd pay ~50 for a thing like Agendus on Palm OS. http://www.iambic.com/agendus/palmos/ That can sync to Evolution (at least Calendar and Contacts) and has good mail app. QT mail is not usable, clawsmail is a lot better but not optimized for a small screen. Michael Sargun Dhillon schrieb: Just out of curiosity, how many OpenMoko users out there would be willing to pay for bounties? Additionally, how many developers would work for bounties? What sort of bounties would you guys request? How much would you pay? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Mokomakefile
At the risk ob beeing called a parrot I want to ask the same question again: Is anyone able to build a 2008.08 image with Mokomakefile? Yes, I am building all of the images. Which branch from asu? dev? stable? It is slow. The first time you have to start the make over and over again until your are done... But thats all in the wiki page. So you might need a day or two. I is not a question how long it takes. For me a couple of packages are broken in asu.stable. At least pixman and xtrans (or something like this) do not compile. Do not use the parallel modus. It only breaks the make earlier. It worked well for me for the 2007.04 stack. Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Mokomakefile
Which branch from asu? dev? stable? All 3: stable, testing and dev ( org.openmoko.asu.stable, org.openmoko.asu.testing, org.openmoko.asu.dev) OK. Cool. Then there is hope for me. Did you try again?: Not a completely fresh setup. I'll give this a try. make setup make update make openmoko-qtopia-x11-image Did you look through the error messages? Yes. Compiling pixman breaks with an unresolved symbol pixman...something. There was a message about this on devel on Aug. 13 and the answer was like please wait 1 or 2 weeks, sources will be fixed until then. Did you try to fix the problems? Not yet. Still try to figure out if this is a general or just my own problem. Did you follow the Build issues part of the page? Yes. make clean-package-pixman and rebuilding it does not solve the problem. Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Mokomakefile
Yes. Compiling pixman breaks with an unresolved symbol pixman...something. There was a message about this on devel on Aug. 13 and the answer was like please wait 1 or 2 weeks, sources will be fixed until then. If I remember well - I am an old man ... - . This happened only if you tried to build FSO in the openmoko environment. Do not do that. No . That's not what I want. I am on the 2008.08 path. I looked into the different builds. The last time pixmap was build in a testing on my machine was the 14.8. (Aug.14). It was not different from earlier builds in stable or dev. Same source, same result. OK. Then I will wipe out my sources und try everything from scratch. Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Mokomakefile
At the risk ob beeing called a parrot I want to ask the same question again: Is anyone able to build a 2008.08 image with Mokomakefile? This is the third time I am asking this. I really noone interested in this? Did I miss anything and do we now build images a different way? Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Numptyphysics on [EMAIL PROTECTED]
I downloaded: http://garage.maemo.org/frs/download.php/3943/numptyphysics_0.2_armel.deb Won't work because they have a different CPU in the the n800/810. If I compile it for the FR with the same options used for the n800/810, it will crash due to an unknown instruction. I installed and it satisfy all dependencies except 2: libosso-email-interface libsdl1.2 Get the ipk (it's in the FSO repositories), extract and put things it into place. I have never done this myself, but might work. Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: ASU Illume Tango Theme
Looks really good and works for me :) Michael Thank you for the patch, i updated the theme and added a little changelog :) - Mit freundlichen Grüßen, Lars Formella Mobil: +49 xxx Fest: +49 xx Mail: [EMAIL PROTECTED] Web: http://www.larsformella.de Am Dienstag, den 26.08.2008, 19:54 +0200 schrieb Marco Trevisan (Treviño): Lars Formella wrote: because i personally dislike the build in asu/illume theme - in german we call it augenkrebs ;) - i created a new fresh one myself with some tango icons. it is still in the early grade (i have no freerunner to test and played around just with qemu), but maybe some one like it. stay tuned for updates and more tango replacements comming... you can find it here: http://52grad.de/.stuff/freerunner/ I've made a little patch [1] to make it work properly also in landscape mode. Maybe it's just a workaround, but it works [2]! Thanks for your updates to this cool theme! [1] http://www.3v1n0.net/openmoko/illume_sun_landscape.tar.gz [2] http://www.3v1n0.net/openmoko/Illume-tangoized-landscape.png ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
How many FR are there?
There are 33660 downloads for numptyphysics up to now. Does anyone have a higher number? Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [SOLVED]Backup rootfs and turn it into flasheable image
Cool. This should go into the wiki under a topic like full backup or so? Michael Am Dienstag, 26. August 2008 14:46:46 schrieb David Samblas: I have found what was wrong, mkfs.jffs2 select the best compress algorith aviable, and that was lzo, that is not suported in kernel by default, so excluding it from de select list adding -x lzo param solves the problem and make a pretty jffs2 to flash :), tested several times :) on Neo(or though an ssh session on Neo) opkg mkfs-jffs2 mkdir /var/tmp/root mount -t jffs2 /dev/mtdblock6 /var/tmp/root on PC (pv used to se the progres of the operation, executed on ubuntu 8.04, change neos ip if needed) sudo aptitude install pv ssh [EMAIL PROTECTED] mkfs.jffs2 -d /var/tmp/root -e 128 --pad --no-cleanmarkers -x lzo | pv -W the_name_of_your_rootfs_image_here.jffs2 scp [EMAIL PROTECTED]:/boot/uImage-2.6.24 the_name_of_your_kernel_image_here.bin Regards., Nishit, why si so slow is a combination of usb 1.1 rate+ tcp reducing even more this rate+ssh protocol even reducing it a little more+ strong work compressing of neo CPU (when I have tested without compressing the rate sensible increase but the jffs2 generated was about twice big) But not I have not measured it but I beleave take less time than flash it. El mar, 26-08-2008 a las 12:56 +0530, Nishit Dave escribió: On Mon, Aug 25, 2008 at 8:34 PM, David Samblas [EMAIL PROTECTED] wrote: I just flashed the resulting jffs2 file and no luck a precious kernel panic arise JFFS2 compresion type 0x07 not aviable Error: jffs2_decompress returned -5 Any ideas?? I had the same error code. I had a working 2007.2 then. Why does it so long to take a backup? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: sound problems on 2008.08
Interesting: openmoko-sound-theme-standard2 was not installed. Works now. Michael Am Freitag, 22. August 2008 07:36:35 schrieb Michael Kluge: Hi, I am running 2008.08 and the phone does not make any sound on an incomming call or when I get a SMS or an entry from my calendar should pop up. I can hear music with openmoko-mediaplayer. The profile in the settings is set to ring and vibrate. ring only does not give any sound either. Any suggestions what could be wrong? I could not found a mixer app for the qtopia stuff. Is there any? Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
2008.08 - white border around icons in the launcher
Hi, any ideas how to remove this? Is this something in the illume theme? Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: 2008.08 - qtopia calendar is quiet
Hmm. Does not work for me even after a fresh boot. Could please send me the relevant settings for this (if you know which are relevant ;) ) ? I'm not sure about all knobs that I could twist. It maybe even be a timezone problem. Michael Am Donnerstag, 21. August 2008 07:56:22 schrieb nickd: Same happens to me both on and suspended. Using August 08 build. Alarm works fine though. Even brings it out of suspend which is nice :) -Nick Michael Kluge wrote: Hi, can anyone confirm that the qtopia calendar application does not make any attempt to make a noise when it is supposed to? I put an event into it, marked it as ring 5 minutes before and nothing happend. Anyone with the same/different experience? Regards, Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
sound problems on 2008.08
Hi, I am running 2008.08 and the phone does not make any sound on an incomming call or when I get a SMS or an entry from my calendar should pop up. I can hear music with openmoko-mediaplayer. The profile in the settings is set to ring and vibrate. ring only does not give any sound either. Any suggestions what could be wrong? I could not found a mixer app for the qtopia stuff. Is there any? Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
2008.08 - qtopia calendar is quiet
Hi, can anyone confirm that the qtopia calendar application does not make any attempt to make a noise when it is supposed to? I put an event into it, marked it as ring 5 minutes before and nothing happend. Anyone with the same/different experience? Regards, Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: numptyphysics ipk
I've got 1 bug, when I activate the keyboard (which is really handy for reset/undo/...). In this case, after clicking on a letter (like 'R'), any new point I click is linked to the last previous point clicked. Yes. I have seen this too. But only on the FR, not on Linux or MAC OS X. I will check this after my vacation. Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: numptyphysics ipk
Point taken. Do you think enough things will be worked out over the next few days such that it can be demoed at LinuxWorld? I'm not responsible for the numptypyhsics port but what I can tell from the source is it should be quite easy to tailor this to the OpenMoko dimension .. Responsibility ;) I did it once. Take it, submit patches. Talk to the author :) Have fun. The port is not 'mine'. We should just sync what we do so that we don't waste resources by having two people working in parallel fixing the smae things twice. But I will not fix things the next two weeks as I am on a camp ground. Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
bitbake and patches
Hi, I am trying to create a bb recipe. I check out the sources I need per svn and need to apply some patches afterwars (copying files over to the svn tree). The patches (=new files) are sitting side by side within the same dir as the bb file. During do_patch there is no pointer to the directory with the bb files. How do I get my patches to the destination path with do_patch() ? Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
numptyphysics ipk
Hi all, the first build for the ipk for numptyphysics can be grabbed here: http://wwwpub.zih.tu-dresden.de/~mkluge/numptyphysics_0.2_armv4t.ipk For usage etc. see the project home page: http://numptyphysics.garage.maemo.org Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: numptyphysics ipk
numptyphysics: error while loading shared libraries: libSDL-1.2.so.0: cannot open shared object file: No such file or directory sdl installed? maybe the ipkg does not define a dependency on libsdl, so it is not pulled in automatically ... Exactly. You need sdl and sdl-image. I build the ipk myself without bitbake, so that's probably why this piece is missing. I'll try to streamline things when the landscape bug is fixed. Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: numptyphysics ipk
Am Mittwoch, 30. Juli 2008 16:01:02 schrieb Jay Vaughan: btw, can you put the source up somewhere, modified for the freerunner? Sure. I put everything I changed (including my first try for the bb recipe) into this tgz: http://wwwpub.zih.tu-dresden.de/~mkluge/numptyphysics_setup.tgz Michael j. On Jul 30, 2008, at 3:28 PM, Michael Kluge wrote: numptyphysics: error while loading shared libraries: libSDL-1.2.so. 0: cannot open shared object file: No such file or directory sdl installed? maybe the ipkg does not define a dependency on libsdl, so it is not pulled in automatically ... Exactly. You need sdl and sdl-image. I build the ipk myself without bitbake, so that's probably why this piece is missing. I'll try to streamline things when the landscape bug is fixed. Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: numptyphysics ipk
btw, can you put the source up somewhere, modified for the freerunner? Sure. I put everything I changed (including my first try for the bb recipe) into this tgz: http://wwwpub.zih.tu-dresden.de/~mkluge/numptyphysics_setup.tgz Amazing. I have sanitized the bitbake recipe and put it into OE. Cool. I need to take a look and see what I missed :) It would be cool, if you could distribute a patch against the original sources though rather than the new files. Yes. This was just a first quick hack. I have contact with the original author and there needs to be fixes to support arbitrary screen resolutions. The x,y coordinates in the level files are mapped 1:1 to the screen at the moment. There is a perl script that converted the 800x480 resolution of the n800 to 480x... . This is probably the first thing to work on. And maybe bigger squares in the edit popup. I bet upstream would appreciate that as well. Yes, Tim (the original author) suggested the things above and takes patches. I will be on vacation for the next two weeks, but will probably work on this afterwards. It would be cool if the landscape bug would be fixed than. This would probably double the fun :) From next release on, it will be installed in FSO by default (see http://scap.linuxtogo.org/files/1563393fc2dda9657dbc50e6582950ae.png) -- I hope that doesn't kill productivity too much ;) Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: numptyphysics
There was good progress this evening on this. It runs now and is usable. I'll try create an ipk tomorrow. Michael Michael Kluge schrieb: Up to now I only have a binary. The Makefile they use is home-made. I fixed this by hand and need to figure out how to write a bb recipe for that. The simulation itself starts and one can draw objects and load levels but somehow the physics do not run (yet). It prints some overrun: XX msec messages (which I think means that the calculations are not done fast enough). I need to figure out why nothing is moving. Michael Sounds good! Could you distribute the pkg file? I'll be happy to try this out with my keyboard :) J 2008/7/28 Michael Kluge [EMAIL PROTECTED]: Hi all, I just got compiled numptyphysics compiled for the FR and the game itself starts. Have not yet checked how to play it without Keyboard. Would be nice to have a fix for the landscape bug for the touchscreen to be able to play it :) http://numptyphysics.garage.maemo.org Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
numptyphysics
Hi all, I just got compiled numptyphysics compiled for the FR and the game itself starts. Have not yet checked how to play it without Keyboard. Would be nice to have a fix for the landscape bug for the touchscreen to be able to play it :) http://numptyphysics.garage.maemo.org Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: numptyphysics
Up to now I only have a binary. The Makefile they use is home-made. I fixed this by hand and need to figure out how to write a bb recipe for that. The simulation itself starts and one can draw objects and load levels but somehow the physics do not run (yet). It prints some overrun: XX msec messages (which I think means that the calculations are not done fast enough). I need to figure out why nothing is moving. Michael Sounds good! Could you distribute the pkg file? I'll be happy to try this out with my keyboard :) J 2008/7/28 Michael Kluge [EMAIL PROTECTED]: Hi all, I just got compiled numptyphysics compiled for the FR and the game itself starts. Have not yet checked how to play it without Keyboard. Would be nice to have a fix for the landscape bug for the touchscreen to be able to play it :) http://numptyphysics.garage.maemo.org Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Got the same message three times
From the last message from Arne in the thread Re: Reply above Quotation I got three copies. Nothing against redundancy, but could the dear admin please take a look? TIA, Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: openmoko-panel-applet for custom scripts
On Wed, Jul 23, 2008 at 2:15 PM, Michael Kluge [EMAIL PROTECTED] wrote: Hi all, is there already an applet for the panel that loads some string scriptname pairs from a config file and shows string in the menu and executes scriptname if I click on string? Or should this be integrated into the aux/power-button menus? Not exactly(that i know of), but on 2007.2 I think you can add your own items to the main application menu, by putting a .desktop file in /usr/share/applications See existing files in that directory for an example .desktop I just tested it by copying and deleting one of the files(ssh'd in from desktop), and it's kinda cool seeing the menu update immediately on the phone screen. Well, together with anew entry in /usr/share/matchbox/vfolders that's all I need :) Thanks for the hint. Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
GPRS working with SIMYO
Hi all, Woo-hoo -- I managed to get an GPRS connection: Jul 23 09:16:59 om-gta02 local2.info chat[9536]: expect (CONNECT) Jul 23 09:16:59 om-gta02 local2.info chat[9536]: ^M Jul 23 09:17:05 om-gta02 local2.info chat[9536]: ATDT*99***1#^M^M Jul 23 09:17:05 om-gta02 local2.info chat[9536]: CONNECT Jul 23 09:17:05 om-gta02 local2.info chat[9536]: -- got it Jul 23 09:17:05 om-gta02 local2.info chat[9536]: send (^M) Jul 23 09:17:05 om-gta02 daemon.info pppd[9532]: Serial connection established. Jul 23 09:17:05 om-gta02 daemon.debug pppd[9532]: using channel 1 Jul 23 09:17:05 om-gta02 daemon.info pppd[9532]: Using interface ppp0 Jul 23 09:17:05 om-gta02 daemon.notice pppd[9532]: Connect: ppp0 -- /dev/ttySAC0 ... Jul 23 09:17:10 om-gta02 daemon.notice pppd[9532]: local IP address 10.161.143.42 Jul 23 09:17:10 om-gta02 daemon.notice pppd[9532]: remote IP address 10.64.64.64 Jul 23 09:17:10 om-gta02 daemon.notice pppd[9532]: primary DNS address 212.23.97.2 Jul 23 09:17:10 om-gta02 daemon.notice pppd[9532]: secondary DNS address 212.23.97.3 Jul 23 09:17:10 om-gta02 daemon.debug pppd[9532]: Script /etc/ppp/ip-up started (pid 9555) Jul 23 09:17:10 om-gta02 daemon.debug pppd[9532]: Script /etc/ppp/ip-up finished (pid 9555), status = 0x0 Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: GPRS working with SIMYO
Sure. The magix seems to be to have an initial wait (for the 'AT bla ready' message) and to accept the ERROR after CFUN, no clue why, but it work. Here is my connect script: #!/bin/sh -e exec /usr/sbin/chat -v \ TIMEOUT 10 \ OK-AT-'' ''\ ABORT BUSY\ ABORT DELAYED\ ABORT NO ANSWER\ ABORT NO DIALTONE\ ABORT VOICE\ ABORT ERROR\ ABORT RINGING\ TIMEOUT 30 \ '' ATZ\ OK ATE1\ OK AT+CFUN=1\ ERROR AT+CPIN=\\\ USE YOUR OWN OK AT+COPS\ OK AT+CGDCONT=1,\IP\,\internet.eplus.de\\ OK 'ATDT*99***1#'\ CONNECT '' Michael Am Mittwoch, 23. Juli 2008 09:45:30 schrieb Timo Jyrinki: 2008/7/23 Michael Kluge [EMAIL PROTECTED]: Woo-hoo -- I managed to get an GPRS connection: Could you share this wisdom?-) It seems that instructions at http://wiki.openmoko.org/wiki/Manually_using_GPRS do not work for many or on FreeRunner. I get an error after first AT+ command, were it AT+CFUN=1 or AT+CGDCONT=1,IP,internet -Timo ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
openmoko-panel-applet for custom scripts
Hi all, is there already an applet for the panel that loads some string scriptname pairs from a config file and shows string in the menu and executes scriptname if I click on string? Or should this be integrated into the aux/power-button menus? Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
openmoko-panel-applet for custom scripts
Hi all, is there already an applet for the panel that loads some string scriptname pairs from a config file and shows string in the menu and executes scriptname if I click on string? Or should this be integrated into the aux/power-button menus? Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
syslog.conf
Hi, could someone please give me a pointer to the structure of the /etc/syslog.conf? It looks neither like a normal syslog.conf (http://linux.about.com/od/commands/l/blcmdl5_syslogc.htm) nor like the syslog-ng I am used to. Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: debugging pppd
OK, found it myself. A different syslog.conf helps. Michael Michael Kluge schrieb: Hi, has anyone experience debugging pppd profiles? I have a profile (attached) for the German provider simyo (eplus reseller). The chat script /etc/ppp/simyo-connect-chat suceeds and I get the message Serial connection established. pppd itself is started with 'debug' and 'nodetach'. After the Serial connection ... message the script gets stuck without any error message :( If I stop it with Ctrl-C the pppd process is somehow still present in the backgound. No clue why, it should stay attached, right? Any hints how to debug this stuff is highly appreciated :) Michael /etc/ppp/peers/simyo --8---8-- /dev/ttySAC0 115200 connect /etc/ppp/simyo-connect-chat crtscts lock hide-password defaultroute usepeerdns disconnect /etc/ppp/simyo-disconnect-chat holdoff 3 ipcp-accept-local ipcp-accept-remote noauth nomagic noipdefault novj novjccomp replacedefaultroute lcp-echo-interval 3 lcp-echo-failure 12 user eplus ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
openmoko calendar2
Hi all, has anyone an idea how to change the alarm settings for the calendar app in OM 2007.2 ? Is it even possible to have an alarm like '5 minutes before due time'? Michael Michael Kluge, M.Sc. Technische Universität Dresden Center for Information Services and High Performance Computing (ZIH) D-01062 Dresden Germany Contact: Willersbau, Room HRSK 151 Phone: (+49) 351 463-32424 Fax:(+49) 351 463-37773 e-mail: [EMAIL PROTECTED] WWW:http://www.tu-dresden.de/zih ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
g_ether as module
Hi, would it be possible to get g_ether as module instead of beeing compiled into the kernel with the next update? This way we could set the MAC adress in /etc/modutils/... The module can do things like: options g_ether host_addr=46:0d:9e:67:69:eb dev_addr=46:0d:9e:67:69:ec Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: g_ether as module
it does not let me change the MAC. It always says: resource busy. Michael arne anka schrieb: not sure, where g_ether comes into the picture, but what's wrong with ifconfig? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: g_ether as module
Well, sounds reasonably :) I'll try again and call ifconfig from pre-up in /etc/network/interfaces. Michael arne anka schrieb: it does not let me change the MAC. It always says: resource busy. you need to shut down the interface before. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: g_ether as module
OK, thanks. iface usb0 inet static pre-up ifconfig usb0 hw ether 6E:A3:B3:D1:4E:24 address 192.168.0.202 ... Works now. Michael Michael Kluge schrieb: Well, sounds reasonably :) I'll try again and call ifconfig from pre-up in /etc/network/interfaces. Michael arne anka schrieb: it does not let me change the MAC. It always says: resource busy. you need to shut down the interface before. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: GTA02 GPS rework for SD card interference issue
This additional capacitor has been added between clock and GND for the SD card. So it is most probably just there to filter frequencies higher than the clock rate itself. Michael Yaroslav Halchenko schrieb: sorry to be pain in the b%%t, but was testing done to check if there is any affect on SD card performance? (I am lazy to look now even what pins at SD are those ;)) just wanted to check On Fri, 18 Jul 2008, Neng-Yu Tu (Tony Tu) wrote: Dear Community: For GTA02 SD card interference GPS issue, our hardware team provide a hardware fix/workaround for this coexistence bug. Sorry post it late, because we have to make sure this fix works and don't have side effects. Here is the fix: http://www.openmoko.org/wiki/Image:Gta02_gps_10pf_rework_sop.pdf ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Claws Mail
Hi all, did anyone succeed in building this package? I only got libtinymail tmut compiled packed up to now. Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: GPS
Today I powered up my gps the first time and got a fix after 80 seconds. I was on a hill in a small village outside in a garden under a apple tree and the Freerunner was standing upright. Then I rebooted it and got an other fix in 80 seconds again. I've been using agps-gui. Much better than I expected. The Freerunner did see 5 satellites the first time, 3 the second time. Michael Ken Young schrieb: thomasg wrote: This all are no arguments. With my TomTom device I can do a full reset so that no GPS data is available at all (also no time and so on) and still get a fix in 3 minutes at 100 km/h. Well, I know the freerunner is no specialized gps navigation device, but the fact that the signals are so weak that it's barely possible to get a fix under optimal condition (clear view to the sky, antenna on top, without moving 1 mm) shows, that this is no simple software problem and has to be fixed. The GPS performance of my Freerunner is also much worse than the GPS performance of my neo1973. I've done side-by-side tests of the two units many times. My neo1973 gets a good fix in 2 to 3 minutes after a completely cold start; it's very reliable. My Freerunner initially was getting a fix after 7 or 8 minutes. For the last few days it has not been able to get a fix at all. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: GPS
arne anka schrieb: Today I powered up my gps the first time and got a fix after 80 seconds. I was on a hill in a small village outside in a garden under a apple tree and the Freerunner was standing upright. Then I rebooted it and got an other fix in 80 seconds again. I've been using agps-gui. Much better than I expected. The Freerunner did see 5 satellites the first time, 3 the second time. i am afraid, most people on this list will hate you now :-) Well, this test scenario on a hill within Europe without buildings around is probably the best case for GPS. I will try again tomorrow by powering it up and driving 15 minutes with the bicycle to work. Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Web Browser Zoom?
Al Johnson schrieb: On Saturday 12 July 2008, Michael Kluge wrote: Al Johnson schrieb: On Saturday 12 July 2008, Michael Kluge wrote: Brian C schrieb: I can't figure out how to zoom in/out while using the web browser (and/or change the font size). Is this functionality not yet coded or am I missing something? Right now the fonts are too big and I see far too little of the page for it to be really usable. Brian Hi Brian, try to compile and install Minimo. It has zoom (but never hides the keyboard). I've tried that using mokomakefile: make build-package-minimo It always fails during config. Any idea what I'm doing wrong? No. How should I without an error message ;) I know ;-) I would have posted it, but was in the middle of another build. That's finished now so I've tried again with the same result - see below. Do you have the toolchain installed? I usually do . setup-env cd build bitbake minimo That works if 'make openmoko-devel-image' did not fail (usually it does not). Then you have an ipk somewhere. Just copy it over (as well as the lib that is beeing build as depency). And do an opkg install ... I think I could also put my two ipk files somewhere. I get exactly the same result doing that as 'make build-package-minimo' - error below. The toolchain is fine I think. I am running an image I built, and have built individual packages including dillo and the matchbox keyboard. Those work fine, and I have repo configs so opkg can pull the deps in over the network. I tried a clean build, but got the same result again. ERROR: function do_compile failed ERROR: log data follows (/home/moko/build/tmp/work/armv4t-angstrom-linux-gnueabi/minimo-1_0.02+cvs20070626-r0/temp/log.do_compile.6690) | NOTE: make -j 4 -f client.mk build | make | make[1]: Entering directory `/home/moko/build/tmp/work/armv4t-angstrom-linux-gnueabi/minimo-1_0.02+cvs20070626-r0/mozilla' | make[1]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule. | rm -f -rf ./dist/sdk | rm -f -rf ./dist/include | /usr/bin/make -C config export | make[2]: Entering directory `/home/moko/build/tmp/work/armv4t-angstrom-linux-gnueabi/minimo-1_0.02+cvs20070626-r0/mozilla/config' | /home/moko/build/tmp/staging/x86_64-linux/usr/bin/perl -I. ./bdate.pl build_number | /home/moko/build/tmp/work/armv4t-angstrom-linux-gnueabi/minimo-1_0.02+cvs20070626-r0/mozilla/config/nsinstall -R -m 644 nsBuildID.h ../mozilla-config.h ./nsStaticComponents.h ../dist/include | rm -f ../config/final-link-comps ../config/final-link-libs ../config/final-link-comp-names | rm -f ../dist/bin/chrome/chromelist.txt | /home/moko/build/tmp/work/armv4t-angstrom-linux-gnueabi/minimo-1_0.02+cvs20070626-r0/mozilla/config/nsinstall -t -m 644 nsBuildID.h ../mozilla-config.h ./nsStaticComponents.h ../dist/sdk/include | /home/moko/build/tmp/work/armv4t-angstrom-linux-gnueabi/minimo-1_0.02+cvs20070626-r0/mozilla/config/nsinstall: cannot access nsBuildID.h: Invalid argument | make[2]: *** [export] Error 1 | make[2]: Leaving directory `/home/moko/build/tmp/work/armv4t-angstrom-linux-gnueabi/minimo-1_0.02+cvs20070626-r0/mozilla/config' | make[1]: *** [default] Error 2 | make[1]: Leaving directory `/home/moko/build/tmp/work/armv4t-angstrom-linux-gnueabi/minimo-1_0.02+cvs20070626-r0/mozilla' | make: *** [build] Error 2 | FATAL: oe_runmake failed NOTE: Task failed: /home/moko/build/tmp/work/armv4t-angstrom-linux-gnueabi/minimo-1_0.02+cvs20070626-r0/temp/log.do_compile.6690 NOTE: package minimo-1_0.02+cvs20070626-r0: task do_compile: failed Hmm. No idea. Looks like the package is broken? Is the nsBuildID.h there? I could not find one. OK, I just found that Arne uploaded its ipk's already :) Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Howto hide keyboard (Was: Re: minimo (browser on freerunner))
arne anka schrieb: i just built minimo and cellwriter for the freerunner (gta02), which went surprisingly well ... make build-package-minimo and make build-package-cellwriter the hardes part was finding the packages afterwards. i put them into two tar-balls, *dbg, *-dev, *-doc and the runtime one. links see below. how cellwriter is supposed to replace the i don't know and with minimo there's always 1/3 of the screen occupied by the keyboard (if somebody knows how to make that more flexible, ie the keyboard popping up when necessary, let me know). for ipk see http://www.ginguppin.de/node/16 ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community I just found this: http://japiblog.dddgames.com/?p=15 I'll give matchbox-applet-inputmanager a chance ... Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Howto hide keyboard (Re: minimo (browser on freerunner))
arne anka schrieb: with minimo there's always 1/3 of the screen occupied by the keyboard (if somebody knows how to make that more flexible, ie the keyboard popping up when necessary, let me know). for ipk see http://www.ginguppin.de/node/16 ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community I just found this: http://japiblog.dddgames.com/?p=15 matchbox-applet-inputmanager might be able to help here. I give it a try. Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Howto hide keyboard (Was: Re: minimo (browser on freerunner))
Michael Kluge schrieb: arne anka schrieb: i just built minimo and cellwriter for the freerunner (gta02), which went surprisingly well ... make build-package-minimo and make build-package-cellwriter the hardes part was finding the packages afterwards. i put them into two tar-balls, *dbg, *-dev, *-doc and the runtime one. links see below. how cellwriter is supposed to replace the i don't know and with minimo there's always 1/3 of the screen occupied by the keyboard (if somebody knows how to make that more flexible, ie the keyboard popping up when necessary, let me know). for ipk see http://www.ginguppin.de/node/16 ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community I just found this: http://japiblog.dddgames.com/?p=15 I'll give matchbox-applet-inputmanager a chance ... Here is the quick and dirty process for manually showing and hiding the keyboard. - kill the matchbox-keyboard process - (install and) start matchbox-applet-inputmanager - run minimo TODO would be a nicer icon in the applet bar (should be easy) and and to put this into the matchbox config. Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Howto hide keyboard (Was: Re: minimo (browser on freerunner))
Michael Kluge schrieb: Michael Kluge schrieb: arne anka schrieb: i just built minimo and cellwriter for the freerunner (gta02), which went surprisingly well ... make build-package-minimo and make build-package-cellwriter the hardes part was finding the packages afterwards. i put them into two tar-balls, *dbg, *-dev, *-doc and the runtime one. links see below. how cellwriter is supposed to replace the i don't know and with minimo there's always 1/3 of the screen occupied by the keyboard (if somebody knows how to make that more flexible, ie the keyboard popping up when necessary, let me know). for ipk see http://www.ginguppin.de/node/16 ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community I just found this: http://japiblog.dddgames.com/?p=15 I'll give matchbox-applet-inputmanager a chance ... Here is the quick and dirty process for manually showing and hiding the keyboard. - kill the matchbox-keyboard process - (install and) start matchbox-applet-inputmanager - run minimo TODO would be a nicer icon in the applet bar (should be easy) and and to put this into the matchbox config. Not so funny. Works exactly once and ends afterwards with: matchbox-keyboa defunct Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Howto hide keyboard (Was: Re: minimo (browser on freerunner))
Ups. Missed that. Looks good. Works :) Michael arne anka schrieb: some hours ago someone already posted how to add the keyboard toggle: matchbox-panel-2 --start-applets systray,startup \ --end-applets openmoko-panel-clock,keyboard,openmoko-panel-battery,openmoko-panel-gsm,openmoko-panel-gps,openmoko-panel-usb,openmoko-p anel-bt,openmoko-panel-memory,openmoko-panel-wifi --titlebar http://lists.openmoko.org/pipermail/community/2008-July/021296.html after rebooting or restarting X in the upper right corner there's a keyboard icon ... ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Web Browser Zoom?
Al Johnson schrieb: On Saturday 12 July 2008, Michael Kluge wrote: Brian C schrieb: I can't figure out how to zoom in/out while using the web browser (and/or change the font size). Is this functionality not yet coded or am I missing something? Right now the fonts are too big and I see far too little of the page for it to be really usable. Brian Hi Brian, try to compile and install Minimo. It has zoom (but never hides the keyboard). I've tried that using mokomakefile: make build-package-minimo It always fails during config. Any idea what I'm doing wrong? No. How should I without an error message ;) Do you have the toolchain installed? I usually do . setup-env cd build bitbake minimo That works if 'make openmoko-devel-image' did not fail (usually it does not). Then you have an ipk somewhere. Just copy it over (as well as the lib that is beeing build as depency). And do an opkg install ... I think I could also put my two ipk files somewhere. Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: GSM Data
Hi Scott, I think you are looking for http://wiki.openmoko.org/wiki/GPRS ? Please have look at the PDF's at the bottom of the page. There is an description of all necessary AT commands. Am Freitag, 11. Juli 2008 04:14:22 schrieb Scott Derrick: When i finally get my FreeRunner is there an application available that will display GSM data? Which tower, signal strength, noise, etc. Scott Michael Michael Kluge, M.Sc. Technische Universität Dresden Center for Information Services and High Performance Computing (ZIH) D-01062 Dresden Germany Contact: Willersbau, Room HRSK 151 Phone: (+49) 351 463-32424 Fax:(+49) 351 463-37773 e-mail: [EMAIL PROTECTED] WWW:http://www.tu-dresden.de/zih ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Web Browser Form Entry?
Brian C schrieb: On FreeRunner 2007.2, I did: opkg install openmoko-browser2 and also installed the full keyboard per instructions here: http://www.ginguppin.de/node/15 Now I browse to Google or any site with a form entry box and I cannot figure out how to enter text into the form. What am I missing? Brian ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community Did you see any error messages during the install of the new keyboard*.ipk's? What image are you using? factory or ScaredyCat? Already rebooted or restarted xserver? Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Web Browser Zoom?
Brian C schrieb: I can't figure out how to zoom in/out while using the web browser (and/or change the font size). Is this functionality not yet coded or am I missing something? Right now the fonts are too big and I see far too little of the page for it to be really usable. Brian Hi Brian, try to compile and install Minimo. It has zoom (but never hides the keyboard). Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
which list to write to (was Re: x offset in landscape mode)
Further to the recent questions about our mailinglists thread, ISTM that this is more suitable for device-owners than the wider community list. As I see it you have a device in your hand and you want to hear from other users who have devices in their hands = device-owners, a list where owners of openmoko devices can share their experiences. http://lists.openmoko.org/mailman/listinfo/ Hmm. That would apply to all: * no quick fix for my GPS * my SIM does not work * gta02 won't charge threads as well? It is probably the best idea to write to both lists (I was not aware of the other list up to now). Or to merge them? As more freerunners are beeing shipped the difference in #people subscribed to both lists should become rather small. I hope you're not offended by this suggestion, and I hope you get helpful replies. No. I already did :) Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
make build-package-claws-mail with mokomakefile fails
Hi all,
there is a problem building claws-mail which is included as version 3.3 in the
openembedded path. I have the latest copy of the Mokomakefile development
environment as well as the toolchain
(http://wiki.openmoko.org/wiki/Toolchain) installed.
Running make build-package-claws-mail fails during the compile stage at a
point where it looks like the arm-gcc tries to compile some C++ code and
fails finding libstdc++.6.so. Adding 'CC=${CXX} LD=${CXX}' to EXTRA_OECONF
(seen in other packages) ends with an error during the configure stage that
says:
...
autoreconf: running:
automake --foreign --add-missing --copy --force-missing --warnings=cross
automake: unknown warning category `cross'
autoreconf: running: gnu-configize
autoreconf: Leaving directory `.'
arm-angstrom-linux-gnueabi-g++: arm-angstrom-linux-gnueabi-g++: No such file
or directory
arm-angstrom-linux-gnueabi-g++: no input files
I think the dependency to libstdc++ comes from an external library used by
claws-mail.
Did I handle this C vs. C++ problem in the BB files correctly or is there an
other preferred way to tackle this?
The error message:
arm-angstrom-linux-gnueabi-g++: arm-angstrom-linux-gnueabi-g++: No such file
or directory
does not tell me so much. If anyone want to have fun looking into the logs I
can send them around as well.
Regards, Michael
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
x offset in landscape mode
Hi all, I have a slight problem with the landscape mode. It seems that the touchscreen subtracts some value from the x position where I touched the screen with the stylus. The y value seems to be fine. If I tap on the '+' on the bottom of the screen it looks like I tapped the 'home' icon. I this a known problem? Has anyone tried the landscape mode and found that everything is OK? Regards, Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: freerunner unable to work with 3G SIMCards?
My German Blau SIM (On the back it says, amongst other things, 3V - does that mean volts?) does NOT work on my new GTA02, despite what is on http://wiki.openmoko.org/wiki/Carriers One colleague's Dutch Orange SIM did work, but two other German Vodafone SIMs did not. One German and one Dutch T-Mobile SIM did not work, but a German Debitel (T-Mobile reseller) did. Nor did a 1 year old German O2 SIM. Tried 4 more German SIMs - none of the them worked: D2 Mannesmann (7 years old) Vodafone O2 T-D1 (T-Mobile) I don't see any pattern. Who has a German SIM working in their FR? Yes, I have two, both work fine: - D1 T-Mobile (from mobilcom) ~1year old - E-PLUS SIMYO ~1month old Any experiments you want me to do? Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: freerunner unable to work with 3G SIMCards?
The SIMYO is. Not sure about the other. Michael Am Dienstag, 8. Juli 2008 15:22:49 schrieb Francesco Cat: yes! tell us if they are UMTS capable or not! :) 2008/7/8 Michael Kluge [EMAIL PROTECTED]: My German Blau SIM (On the back it says, amongst other things, 3V - does that mean volts?) does NOT work on my new GTA02, despite what is on http://wiki.openmoko.org/wiki/Carriers One colleague's Dutch Orange SIM did work, but two other German Vodafone SIMs did not. One German and one Dutch T-Mobile SIM did not work, but a German Debitel (T-Mobile reseller) did. Nor did a 1 year old German O2 SIM. Tried 4 more German SIMs - none of the them worked: D2 Mannesmann (7 years old) Vodafone O2 T-D1 (T-Mobile) I don't see any pattern. Who has a German SIM working in their FR? Yes, I have two, both work fine: - D1 T-Mobile (from mobilcom) ~1year old - E-PLUS SIMYO ~1month old Any experiments you want me to do? Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: freerunner unable to work with 3G SIMCards?
[EMAIL PROTECTED] schrieb: On Tue, Jul 08, 2008 at 03:17:17PM +0200, Michael Kluge wrote: My German Blau SIM (On the back it says, amongst other things, 3V - does that mean volts?) does NOT work on my new GTA02, despite what is on http://wiki.openmoko.org/wiki/Carriers One colleague's Dutch Orange SIM did work, but two other German Vodafone SIMs did not. One German and one Dutch T-Mobile SIM did not work, but a German Debitel (T-Mobile reseller) did. Nor did a 1 year old German O2 SIM. Tried 4 more German SIMs - none of the them worked: D2 Mannesmann (7 years old) Vodafone O2 T-D1 (T-Mobile) I don't see any pattern. Who has a German SIM working in their FR? Yes, I have two, both work fine: - D1 T-Mobile (from mobilcom) ~1year old - E-PLUS SIMYO ~1month ol Can you please post what's written on the simyo one? I've got a new simyo card too and it claims to be 1.8V, but i don't have a freerunner to test it and i can't justify buying one if it's likely that it won't work second line of the text on my sim reads 72K 1.8V #569 J276 Sure. 72K 3V #568 H276. I ordered the card mid Juni 2008 and it was shipped June, 20 to be exact :) Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: on screen keyboard?
Is xvkbd an option? I did not check the dependencies yet. Michael On Saturday 05 July 2008, Federico Lorenzi wrote: Afaik raster was working on a magic keyboard that had all sorts of cool features. I think that's the one in the qtopia-x11 image. I was wondering whether it would work in the gtk image, but haven't tried yet. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: freerunner unable to work with 3G SIMCards?
Most probably. I am waiting for one too and will use it with a SIM card from SIMYO. It's a prepaid card, they charge for 1MB data 24 Cent and use the e-plus network. I guess a few people with a freerunner have such a card as most other offers for data is more expensive. Michael Am Donnerstag, 3. Juli 2008 08:04:08 schrieb Michael Shiloh: Do we have any other Freerunners who are e-plus customers in Germany? Need to get some information here. Michael Arne Zachlod wrote: Hi Michael, my network provider is e-plus and i'm located in germany. Arne Michael Shiloh schrieb: Hi Arne, Who is your network provider? Where are you located? Michael? Arne Zachlod wrote: Hej guys, I had got my today and i have tested it, but my 3G card doesn't function with it. he can't find a network and is unable to get the pin. (i have disabled pin with another phone, then there was only the problem that he doesn't find a network). but with other SIM Cards form same provider there is no problem. and other, non-3G-phones hasn't problem with this card, too. i have no idea where i can find any informations. the gsm.log file doesn't exist and my gsm-firmware-version is moko8. So, my question is: does anybody else has a problem with 3G Sim card? Thank you, Arne ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Fwd: Re: Bestellung openmoko
Uhh. I have 138. I'll be patient :) Michael Am Donnerstag, 3. Juli 2008 16:13:05 schrieb Tim: We hat Trisoft order 28 and 33. Both arrived on 2nd of july. -tim Michael Kluge schrieb: What order number did you have? Their website still says they are doing testing and will ship the devices later. Michael Am Donnerstag, 3. Juli 2008 03:23:21 schrieb Tim: my packet from trisoft arrived 2nd of july at 9:30 a.m. \o/ got wifi/gps/mp3 working so far... Hi all, my name is Tim and I'm addicted to Neo Freerunner Marcel schrieb: Short translation: Your packet has begun its trip today! Christoph sent my Freerunner without even knowing for sure that he's getting the payment (but I told him that the bank transfer has been initiated [which is true]) - he suggested praising him on the ml and this is just what I want to do: Christoph, you're simply great! :) -Marcel --- - Betreff: Re: Bestellung openmoko Von: [EMAIL PROTECTED] (Christoph Pulster) Datum: 02 Jul 2008 14:46:00 +0200 An: [EMAIL PROTECTED] An: [EMAIL PROTECTED] Hallo, Gute Neuigkeiten zu ihrer Bestellung bei www.Pulster.de: Ihr Pakerl ist seit heute unterwegs ! (ohne aufs Geld zu warten, kannst uns ja ein bisschen in der ML loben :) ) Wir bedanken uns fuer den Auftrag und wuenschen viel Freude. Wenn sich Fragen zu ihrer Bestellung ergeben, stehe ich Ihnen gerne direkt per Email zur Verfuegung. Oder rufen Sie uns auf unserer Hotline an: 01805-785 783 (DiDo 10-14 Uhr). Schoene Gruesse aus Leimen, Christoph Pulster _ P|U|L|S|T|E|R - Organiser Shop - Openmoko Psion Banaterweg 5, 69181 Leimen, Germany Tel 01805 - 785 783 Mail [EMAIL PROTECTED] Fax 01803 - 551 809 858 Web www.Pulster.de _ --- - ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Fwd: Re: Bestellung openmoko
What order number did you have? Their website still says they are doing testing and will ship the devices later. Michael Am Donnerstag, 3. Juli 2008 03:23:21 schrieb Tim: my packet from trisoft arrived 2nd of july at 9:30 a.m. \o/ got wifi/gps/mp3 working so far... Hi all, my name is Tim and I'm addicted to Neo Freerunner Marcel schrieb: Short translation: Your packet has begun its trip today! Christoph sent my Freerunner without even knowing for sure that he's getting the payment (but I told him that the bank transfer has been initiated [which is true]) - he suggested praising him on the ml and this is just what I want to do: Christoph, you're simply great! :) -Marcel Betreff: Re: Bestellung openmoko Von: [EMAIL PROTECTED] (Christoph Pulster) Datum: 02 Jul 2008 14:46:00 +0200 An: [EMAIL PROTECTED] An: [EMAIL PROTECTED] Hallo, Gute Neuigkeiten zu ihrer Bestellung bei www.Pulster.de: Ihr Pakerl ist seit heute unterwegs ! (ohne aufs Geld zu warten, kannst uns ja ein bisschen in der ML loben :) ) Wir bedanken uns fuer den Auftrag und wuenschen viel Freude. Wenn sich Fragen zu ihrer Bestellung ergeben, stehe ich Ihnen gerne direkt per Email zur Verfuegung. Oder rufen Sie uns auf unserer Hotline an: 01805-785 783 (DiDo 10-14 Uhr). Schoene Gruesse aus Leimen, Christoph Pulster _ P|U|L|S|T|E|R - Organiser Shop - Openmoko Psion Banaterweg 5, 69181 Leimen, Germany Tel 01805 - 785 783 Mail [EMAIL PROTECTED] Fax 01803 - 551 809 858 Web www.Pulster.de _ ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Sillyness: Free Runner price vs iphone 3G price
7. Apple currently defines the PDA/mobile marketplace. No, the smartphone market is dominated by the Blackberry. Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Openmoko official resell partners
Hi Harry, no TRIsoft in Germany? Michael Am Mittwoch, 11. Juni 2008 11:43:59 schrieb Harry Tsai: Dear Community, You should already know Pulster and IDA, they are our official reseller in the Germany and India. Today, I want to introduce new partners in Germany and UK, you can buy freerunner from them for save your shipping cost and time. We also have a formal press will release to public later. Germany Golden Delicious Computers- _http://www.goldelico.com _Dr.Nikolaus Schaller UK TrueBox Technologies - http://www.TrueBox.co.uk Mr. Rob wood Besides, I am talking with CEO of Bearstech France about cooperation, so far they are very closely to become my next official partner. BR Harry ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Openmoko official resell partners
Hi Harry, no TRIsoft in Germany? Michael Am Mittwoch, 11. Juni 2008 11:43:59 schrieb Harry Tsai: Dear Community, You should already know Pulster and IDA, they are our official reseller in the Germany and India. Today, I want to introduce new partners in Germany and UK, you can buy freerunner from them for save your shipping cost and time. We also have a formal press will release to public later. Germany Golden Delicious Computers- _http://www.goldelico.com _Dr.Nikolaus Schaller UK TrueBox Technologies - http://www.TrueBox.co.uk Mr. Rob wood Besides, I am talking with CEO of Bearstech France about cooperation, so far they are very closely to become my next official partner. BR Harry ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Sillyness: Free Runner price vs iphone 3G price
Kalle Happonen wrote: Michael Kluge wrote: 7. Apple currently defines the PDA/mobile marketplace. No, the smartphone market is dominated by the Blackberry. Dominate and define are different things. Blackberry might dominate (only in US though), but now Apple has the new cool thing, and every manufacturer from Samsung to Nokia make releases of similar models at the same time. So Apple does define the smartphone market for a given cusomer segment. Yes, I was talking about the *I use it for my business* market in the US. Correct. Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
