you might want to read the thread
http://lists.openmoko.org/nabble.html#nabble-td786643
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
> it looks like you've previously got a fix, then turned off the gps and
> restarted it. gpsd will often report phantom locations (usually the
> last place you were at before turning off) in this situation - even,
> as in this case, a decent hdop value (2.6)
>
> you need to make sure gps is on an
screenshot1
sorry
<>___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
screenshot2
<>___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
sorry if i'm being missing the point and being pedantic, but i'm sure
latitude measures angle north/south of the equator.
you're right, a typo from me, mea culpa
the latitude N/S is correct
the longitude is biased W by ± 1°, correct that's more than 100 km
I confirm the position on the map
hi all,
I've tried several distrib (FSO, SHR) and I have an issue with the GPS
maybe more specifically TangoGPS, don't know
the symptom is :
After the fix, Tango shows me on the correct position on the map
but in the Trip tab the latitude data is completely wrong, more than 1
degree west
Doe
Matt Brown a ecrit:
> Anyway, I've attached a patch to make your script work with Python 2.5
> (element tree moved within the standard library so needs to be
> imported differently).
>
> Thanks
>
Thanks to you,
this improved version is uploaded now
Hi freephone users,
I wrote a little python script that will inject geocaching positions
into tangoGPS, so that you can use your freephone to locate the caches
you select.
You'll find screenshots, instructions and download at :
http://www.zindep.com/blog-zindep/geocaching_tangogps
I hope it
hi community gurus,
I've done my homework, at least I tried to, reading through the wiki and
elsewhere
http://lists.openmoko.org/nabble.html#nabble-td1084542
http://wiki.openmoko.org/wiki/BitBake_recipe
http://wiki.openmoko.org/wiki/MokoMakefile
http://faassen.n--tree.net/blog/view/weblog/2007/0
see
http://www.zindep.com/blog-zindep/openmoko-chess/
for info and download
direct access for the package
http://www.zindep.com/blog-zindep/openmoko-chess/gnuchess_0.1_armv4t.ipk/view
___
Openmoko community mailing list
community@lists.openmoko.org
why not try this technique through the bluetooth ?
http://www.youtube.com/watch?v=QgKCrGvShZs
that is, using a wiimote
regards
NiL
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Hi all,
I'm having my first try at compiling programs for the FR.
I've a python background mostly, and I'm not familiar at compiling stuff
beyond the configure make make install routine.
I've been following instructions at http://wiki.openmoko.org/wiki/Toolchain
and managed to get gnuchess ru
Hi all,
I managed to acces my SD Card (SanDisk SDSDQ-8192-E11M) using a slow
500 clock.
My uboot version is 1.3.2-moko12
downloaded 9/6/2008 [1]_
.. [1]
http://downloads.openmoko.org/releases/Om2008.8-update/gta02v5_and_up-u-boot.bin
but here is more question about u-boot_env
Of cours
Hi all,
I have problems accessing my 8Go SD Card
following different advices found in the wiki and the mailing list, I
managed to change env in uboot
after boot :
[EMAIL PROTECTED]:~# cat /proc/cmdline
glamo_mci.sd_max_clk=1000 rootfstype=jffs2 root=/dev/mtdblock6
console=ttySAC2,11520
[EMAIL PROTECTED]:/sys/module/glamo_mci/parameters# cat sd_drive
0
[EMAIL PROTECTED]:/sys/module/glamo_mci/parameters# cat sd_idleclk
0
[EMAIL PROTECTED]:/sys/module/glamo_mci/parameters# cat sd_max_clk
1666
[EMAIL PROTECTED]:/sys/module/glamo_mci/parameters# cat sd_slow_ratio
8
haven't had m
Hi all,
I'm a newcomer to this list
I just received a new sd card
a SanDisk SDSDQ-8192-E11M, shown as supported in
http://wiki.openmoko.org/wiki/Supported_microSD_cards
following these instructions :
http://wiki.openmoko.org/wiki/Booting_from_SD#Partioning_the_SD_card
I managed to fdisk i
16 matches
Mail list logo