Re: Quick e-mail poll: Still using your Freerunner?
no no shr-u On Mon, Jan 4, 2010 at 3:25 PM, Bernd Prünster wrote: > jeremy jozwik wrote: >> On Tue, Dec 29, 2009 at 12:30 PM, Risto H. Kurppa wrote: >> >>> Do you use FR as your daily/primary phone? >>> Do you use FR as your primary PDA? >>> What distribution you run most of the time? >>> > yes > yes > shr-u > > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Dead FR: does not boot
I tried but no sound/cracking from the speaker, nothing. looks dead. On Mon, Jan 19, 2009 at 12:16 PM, Pander wrote: > Plug in the charger and wibble the usb connector gently, when speaker is > cracking all the time, usb connector in the device is broken. > > Xavier Vens wrote: >> Hi, >> >> I have the same issue with my GTA02. >> i tried lot of combinaison but nothing i cannot make my freerunner >> botting anymore. >> >> I let is charging 4 hours with the wall charger. >> i let it charging 3 hours on usb cable >> i tried to boot NOR without battery >> >> remove batterie and charger, press AUX-button and now plug in >> USB-cable, repeat this several time without batterie. Then insert >> batterie and repeat again. >> >> nothing solved my problem. >> >> On Mon, Jan 19, 2009 at 11:33 AM, Christ van Willegen >> wrote: >>> On Mon, Jan 19, 2009 at 10:57 AM, Eildert Groeneveld >>> wrote: >>>> Dear List >>>> the booting issue with a flat battery has been with us for some time, but >>>> allegedly also been solved. >>> AFAIK this is unsolvable. >>> >>>> My FR seems to have a drained battery but no combination of aux/power and >>>> power/aux with usb/laptop and wallsocket could persuade it to enter life: >>>> it simply stays dead. >>> Have you tried leaving it with the wall charger in for a few hours? >>> >>> Christ van Willegen >>> >>> ___ >>> Openmoko community mailing list >>> community@lists.openmoko.org >>> http://lists.openmoko.org/mailman/listinfo/community >>> >> >> ___ >> Openmoko community mailing list >> community@lists.openmoko.org >> http://lists.openmoko.org/mailman/listinfo/community > > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Dead FR: does not boot
Hi, I have the same issue with my GTA02. i tried lot of combinaison but nothing i cannot make my freerunner botting anymore. I let is charging 4 hours with the wall charger. i let it charging 3 hours on usb cable i tried to boot NOR without battery remove batterie and charger, press AUX-button and now plug in USB-cable, repeat this several time without batterie. Then insert batterie and repeat again. nothing solved my problem. On Mon, Jan 19, 2009 at 11:33 AM, Christ van Willegen wrote: > On Mon, Jan 19, 2009 at 10:57 AM, Eildert Groeneveld > wrote: >> Dear List >> the booting issue with a flat battery has been with us for some time, but >> allegedly also been solved. > AFAIK this is unsolvable. > >> My FR seems to have a drained battery but no combination of aux/power and >> power/aux with usb/laptop and wallsocket could persuade it to enter life: >> it simply stays dead. > Have you tried leaving it with the wall charger in for a few hours? > > Christ van Willegen > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: raster image + zecke testing branch with gpsdrive
I found 5 min ago, i made a search on openmoko wiki. Thank you. On Sun, Aug 24, 2008 at 6:25 PM, Lech Karol Pawłaszek <[EMAIL PROTECTED]> wrote: > Xavier Vens wrote: >> Hi Rui, >> >> the gpsd was installed, when i try to start gpsd: >> /etc/init.d/gpsd start >> Starting gpsd: No /dev/ttyS3 GPS device, aborting gpsd startup. Check >> /etc/default/gpsd > > That's easy one to fix. > > http://wiki.openmoko.org/wiki/Getting_Started_with_your_Neo_FreeRunner#Use_the_GPS > > Kind regards, > > -- > Lech Karol Pawłaszek > "You will never see me fall from grace" [KoRn] > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: raster image + zecke testing branch with gpsdrive
Hi Rui, the gpsd was installed, when i try to start gpsd: /etc/init.d/gpsd start Starting gpsd: No /dev/ttyS3 GPS device, aborting gpsd startup. Check /etc/default/gpsd On Sun, Aug 24, 2008 at 5:04 PM, Rui Miguel Silva Seabra <[EMAIL PROTECTED]> wrote: > On Sun, Aug 24, 2008 at 04:59:36PM +0200, Xavier Vens wrote: >> I'm using the rather image 20080815 (from >> http://download.enlightenment.org/misc/) and the testing branch of >> zecke (http://people.openmoko.org/~zecke/) to be able to make the >> dialer working correctly (dial in/dial out / sms / dtmf) >> i decided to install the gpsdrive application, the first starts was >> not positive, the application won"'t start and give an error. >> i solved it by creating the missing file : >> /usr/share/gpsdrive/map_koord.txt. So now the application is starting >> but saying that there is no gps. >> do you have an idea? > > It appears gpsd is not installed by default. So not only I had to enable > the GPS, but also I had to "opkg install gpsd" and then "/etc/init.d/gpsd > start" > > Rui > > -- > Frink! > Today is Sweetmorn, the 17th day of Bureaucracy in the YOLD 3174 > + No matter how much you do, you never do enough -- unknown > + Whatever you do will be insignificant, > | but it is very important that you do it -- Gandhi > + So let's do it...? > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
raster image + zecke testing branch with gpsdrive
Hi All, I'm using the rather image 20080815 (from http://download.enlightenment.org/misc/) and the testing branch of zecke (http://people.openmoko.org/~zecke/) to be able to make the dialer working correctly (dial in/dial out / sms / dtmf) i decided to install the gpsdrive application, the first starts was not positive, the application won"'t start and give an error. i solved it by creating the missing file : /usr/share/gpsdrive/map_koord.txt. So now the application is starting but saying that there is no gps. do you have an idea? thanks Xavier ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Can't get the phone registered (ticket #1766)
I had the same problem, i have deleted the files in /var/lib/opkg, and using only the testing branch, after deleting i made opkg update followed by a opkg upgrade, and it works well for me. I didn't use the dev branch. On Sat, Aug 23, 2008 at 10:04 AM, Nishit Dave <[EMAIL PROTECTED]> wrote: > On Sat, Aug 23, 2008 at 7:22 AM, Xavier Vens <[EMAIL PROTECTED]> wrote: >> >> I had the same problem with the image >> http://download.enlightenment.org/misc/, but after adding the testing >> branch of http://people.openmoko.org/~zecke/ i can dialout/receiving >> calls/ receiving system sms from provider voicemail/ receiving normal >> sms from friends. >> >> 1 i have installed the images from >> http://download.enlightenment.org/misc/ (20080815) >> 2 i deleted files in the /var/lib/opkg folder >> 3 create the zecke.conf file in /etc/opkg (om2008.8-testing) >> 4 opkg update >> 5 opkg upgrade and reboot >> 6 started the dialer, entring my pin code >> >> it's works well, now let's see the stability ;) >> > > I am using the stock om2008.8 images, and with both zecke-dev and > zecke-testing repos, I'm getting errors like the following while doing opkg > upgrade (after opkg update) for a lot of packages/libraries: > > Failed to download qtopia-phone-x11-taskmanager-app-data. Perhaps you need > to run 'opkg update'? > > What am I doing wrong? And why doesn't somebody test basic phone functions > before publishing a 'stable' release? > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Can't get the phone registered (ticket #1766)
I had the same problem with the image http://download.enlightenment.org/misc/, but after adding the testing branch of http://people.openmoko.org/~zecke/ i can dialout/receiving calls/ receiving system sms from provider voicemail/ receiving normal sms from friends. 1 i have installed the images from http://download.enlightenment.org/misc/ (20080815) 2 i deleted files in the /var/lib/opkg folder 3 create the zecke.conf file in /etc/opkg (om2008.8-testing) 4 opkg update 5 opkg upgrade and reboot 6 started the dialer, entring my pin code it's works well, now let's see the stability ;) On Fri, Aug 22, 2008 at 7:23 PM, julien cubizolles <[EMAIL PROTECTED]> wrote: > Le vendredi 22 août 2008 à 18:11 +0200, Alexander Menk a écrit : > >> >> I did like suggested in http://wiki.openmoko.org/wiki/Om_2008.8_Guide >> (but replaced om2008.8-dev by om2008.8-testing) after freshly flashing >> the Om 2008 kernel and rootfs image. > > I did basically the same except that I started by flashing raster's > image (from http://download.enlightenment.org/misc/) and the phone isn't > slower than before. > > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: FSO milestone 2 Zhone sending digit
Hi, I suppose you mean the button with the square in it, on the middle, but nothing happend when use that button, the only button that works is the cross to get out of the dialer. Your right i have remarked to sames issue when you type the first digit it does not appear, he is appearing only when you type the second one. The same behaviour when you delete the digits. On Fri, Aug 22, 2008 at 7:02 PM, Philippe Guillebert <[EMAIL PROTECTED]> wrote: > Xavier Vens wrote: >> Hi All, >> >> Now the dialout works :-); does anybody knows how to send digit to an >> IVR i called with Zhone ? >> On the screen, i have the phone dialed with 2 buttons, hold and hangup >> but no way to send the digits. > > Hi, > > Click the middle button at the bottom of the screen ; you get back to > the dialer with digits. > > Then, you click the digit you want AND CLICK VALIDATE. > > Not obvious, but working ! > > BTW : there seems to be a little bug when typing numbers in the dialer, > the first digit isn't showed until the second one is typed. > > > -- > Phyce > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: FSO milestone 2 Zhone sending digit
Good news Thank you. Is it a way to test it ? On Thu, Aug 21, 2008 at 6:19 PM, Michael 'Mickey' Lauer <[EMAIL PROTECTED]> wrote: > Am Donnerstag 21 August 2008 17:28:06 schrieb Xavier Vens: >> Hi All, >> >> Now the dialout works :-); does anybody knows how to send digit to an >> IVR i called with Zhone ? > > DTMF has been added after milestone2 to zhone. This will appear in ms3 due > around end of august / early september. > > -- > :M: > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
FSO milestone 2 Zhone sending digit
Hi All, Now the dialout works :-); does anybody knows how to send digit to an IVR i called with Zhone ? On the screen, i have the phone dialed with 2 buttons, hold and hangup but no way to send the digits. i tried with the virtual keyboard but no success. I running the Freerunner with FSO milestone 2. thanks ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [OT] Re: FSO milestone 2 on freerunner dial out problem
On Thu, Aug 21, 2008 at 1:30 PM, Yorick Moko <[EMAIL PROTECTED]> wrote: > On Thu, Aug 21, 2008 at 1:04 PM, Xavier Vens <[EMAIL PROTECTED]> wrote: >> To be more precise on the SIM; it is a pack prepaid from belgium >> carrefour mobile that costs 15 Euro. >> >> >> On Thu, Aug 21, 2008 at 12:11 PM, Xavier Vens <[EMAIL PROTECTED]> wrote: >>> My works to receive call, but not for dial out. How can i see the >>> model of the sim card ? >>> >>> On Thu, Aug 21, 2008 at 12:04 PM, Jan Keymeulen <[EMAIL PROTECTED]> wrote: >>>> On Thu 21 August 2008 om 11:11:01 GMT Xavier Vens told us: >>>>> Hi All, >>>>> >>>>> I am the happy owner of a freerunner from now 2 weeks, I have tried >>>>> several distribution but I stop my choice on FSO milestone 2. >>>>> Yesterday, I was looking for a sim (Prepaid BASE in Belgium), my first >>>>> test is to receive a call, what worked well. But when I try to compose >>>>> an outgoing call, nothing happens. I'm using the validation buttton >>>>> and I remain on the screen with the number telephonne. >>>>> does someone have an idea ? >>>>> >>>> >>>> What kind of BASE simcard do you have? Mine, a "128 kbit banxafe e-sim", >>>> doesn't work at all. Probably because it's one of those 3G cards.. >>>> >>>> -- >>>> "Government is the Entertainment Division of the military-industrial >>>> complex." >>>> -- Frank Zappa >>>> >>>> ___ >>>> Openmoko community mailing list >>>> community@lists.openmoko.org >>>> http://lists.openmoko.org/mailman/listinfo/community >>>> >>> >> >> ___ >> Openmoko community mailing list >> community@lists.openmoko.org >> http://lists.openmoko.org/mailman/listinfo/community >> > > your SIM is probably not to blame > 2008.08 refused to let me make outgoing calls (incomming calls and sms > worked fine) while I could make outgoing calls with 2007.2 > Good news it works, i can dial out ,but i don't know what's happend. After rebooting 2 times, i got a suprise, i can dail out. Actually, i have reboot 4 times from now and still working. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [OT] Re: FSO milestone 2 on freerunner dial out problem
To be more precise on the SIM; it is a pack prepaid from belgium carrefour mobile that costs 15 Euro. On Thu, Aug 21, 2008 at 12:11 PM, Xavier Vens <[EMAIL PROTECTED]> wrote: > My works to receive call, but not for dial out. How can i see the > model of the sim card ? > > On Thu, Aug 21, 2008 at 12:04 PM, Jan Keymeulen <[EMAIL PROTECTED]> wrote: >> On Thu 21 August 2008 om 11:11:01 GMT Xavier Vens told us: >>> Hi All, >>> >>> I am the happy owner of a freerunner from now 2 weeks, I have tried >>> several distribution but I stop my choice on FSO milestone 2. >>> Yesterday, I was looking for a sim (Prepaid BASE in Belgium), my first >>> test is to receive a call, what worked well. But when I try to compose >>> an outgoing call, nothing happens. I'm using the validation buttton >>> and I remain on the screen with the number telephonne. >>> does someone have an idea ? >>> >> >> What kind of BASE simcard do you have? Mine, a "128 kbit banxafe e-sim", >> doesn't work at all. Probably because it's one of those 3G cards.. >> >> -- >> "Government is the Entertainment Division of the military-industrial >> complex." >> -- Frank Zappa >> >> ___ >> Openmoko community mailing list >> community@lists.openmoko.org >> http://lists.openmoko.org/mailman/listinfo/community >> > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [OT] Re: FSO milestone 2 on freerunner dial out problem
My works to receive call, but not for dial out. How can i see the model of the sim card ? On Thu, Aug 21, 2008 at 12:04 PM, Jan Keymeulen <[EMAIL PROTECTED]> wrote: > On Thu 21 August 2008 om 11:11:01 GMT Xavier Vens told us: >> Hi All, >> >> I am the happy owner of a freerunner from now 2 weeks, I have tried >> several distribution but I stop my choice on FSO milestone 2. >> Yesterday, I was looking for a sim (Prepaid BASE in Belgium), my first >> test is to receive a call, what worked well. But when I try to compose >> an outgoing call, nothing happens. I'm using the validation buttton >> and I remain on the screen with the number telephonne. >> does someone have an idea ? >> > > What kind of BASE simcard do you have? Mine, a "128 kbit banxafe e-sim", > doesn't work at all. Probably because it's one of those 3G cards.. > > -- > "Government is the Entertainment Division of the military-industrial > complex." > -- Frank Zappa > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
FSO milestone 2 on freerunner dial out problem
Hi All, I am the happy owner of a freerunner from now 2 weeks, I have tried several distribution but I stop my choice on FSO milestone 2. Yesterday, I was looking for a sim (Prepaid BASE in Belgium), my first test is to receive a call, what worked well. But when I try to compose an outgoing call, nothing happens. I'm using the validation buttton and I remain on the screen with the number telephonne. does someone have an idea ? Xavier. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Europe Distribution
On pulster the price is in the description, the price in the list is 0.00 Euro, should not means that they will sell it at 299 Euro. I don't trust this actually. On Thu, May 22, 2008 at 6:49 PM, Sebastian Billaudelle <[EMAIL PROTECTED]> wrote: > pulster.eu seems to be the first OFFICIAL distributor in europe! > Freerunner -> 299€ > > cheers > Sebastian > > Am Donnerstag, den 22.05.2008, 16:53 +0200 schrieb Steven Le Roux: > > On Thu, May 22, 2008 at 2:54 PM, Joachim Steiger <[EMAIL PROTECTED]> wrote: > > Steven Le Roux wrote: >> What about Europe distribution ;). Let's come back to the subject :) > > > well.. i think that was already answered somewhere in the thread in > other words, but here my short version: > > afaik there will be 2 possibilities: > > - order at the openmoko us based webshop. > - pay in us$ > - pay the (to europe quite high but not unusual) higher shipping fee > - if not in the us: pay the VAT/sales tax of the target country on > recieving the package to the ups guy (usually in cash) > - use a CC (currently JCB, VISA, MASTER. _no_ AMEX afaik) > > - order at a local distributor > - pay the local currency > - pay for shipping if you do not pick it up yourself > - pay the regional tax/vat of your county directly with the device and > shipping > > so the bottomline is: us customers as well as worldwide can very easily > order directly at openmoko. but if you do not want to have the hassle of > transatlantic shipping, different currencies etc or want local > warranty, buy at a local distributor. > > i guess due to the shipping costs its cheaper and less hassle to order > single devices directly at a distributor. also these could have > different payment methods, but thats their decision. > > > kind regards > > -- > > Joachim Steiger > Openmoko Central Services > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > > > To resume, there are some dsitributors : > > France : Bearstech > Germany : TRIsoft > > we don't already know conditions, and prices with Bearstech, but TRIsoft > seems to be arrested to 350€ incl VAT (plus fee's shipment) > > -- > Steven Le Roux > Jabber-ID : [EMAIL PROTECTED] > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > > Please do not send me any Microsoft Office documents - I won't accept them! > See http://www.gnu.org/philosophy/no-word-attachments.html for more > information! > > Sorry! > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community