Re: [Debian] read GPS logger i-blue 747 on freerunner over USB
Hello, Am Donnerstag 12. März 2009 22:12:06 schrieb Rask Ingemann Lambertsen: On Wed, Mar 11, 2009 at 05:46:19PM +0100, Carsten Gerlach wrote: The kernel has the right module for this chipset, cp2101, wich I can load with modprobe cp2101. It should happen automatically. Yes, now it works. I know, that i have to set the Freerunner to USB host mode. I used the openmoko-panel to switch to USB host mode. That hasn't worked for a few months now. To switch to USB host mode: # echo /sys/devices/platform/s3c2410-ohci/usb_mode host # echo /sys/class/i2c-adapter/i2c-0/0-0073/neo1973-pm-host.0/hostmode 1 To switch back to USB device mode: # echo /sys/class/i2c-adapter/i2c-0/0-0073/neo1973-pm-host.0/hostmode 0 # echo /sys/devices/platform/s3c2410-ohci/usb_mode device Yeah, that was the right hint. Now it works. But the Freerunner is _very_ slow. I should take the laptop with me ;-) Greetings, Carsten -- Hier ist mein öffentlicher GPG-Schlüssel: http://daswaldhorn.funpic.de/gpg.html = www.stopptdievorratsdatenspeicherung.de signature.asc Description: This is a digitally signed message part. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [Debian] read GPS logger i-blue 747 on freerunner over USB
On Wed, Mar 11, 2009 at 05:46:19PM +0100, Carsten Gerlach wrote: The kernel has the right module for this chipset, cp2101, wich I can load with modprobe cp2101. It should happen automatically. I know, that i have to set the Freerunner to USB host mode. I used the openmoko-panel to switch to USB host mode. That hasn't worked for a few months now. To switch to USB host mode: # echo /sys/devices/platform/s3c2410-ohci/usb_mode host # echo /sys/class/i2c-adapter/i2c-0/0-0073/neo1973-pm-host.0/hostmode 1 To switch back to USB device mode: # echo /sys/class/i2c-adapter/i2c-0/0-0073/neo1973-pm-host.0/hostmode 0 # echo /sys/devices/platform/s3c2410-ohci/usb_mode device -- Rask Ingemann Lambertsen Danish law requires addresses in e-mail to be logged and stored for a year ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
[Debian] read GPS logger i-blue 747 on freerunner over USB
Hello everybody, next week i want to go skiing and track the piste for Openstreetmap. But I don't want to use the Freerunner for that but the i-blue 747 from Transystem. I want to use the Freerunner only as storage device for the log files. So, I have installed mtkbabel for reading the logger. The kernel has the right module for this chipset, cp2101, wich I can load with modprobe cp2101. I know, that i have to set the Freerunner to USB host mode. I used the openmoko-panel to switch to USB host mode. My problem now is, the Freerunner doesn't record, that I connect the i-blue to it. On my Ubuntu desktop PC i get the following messages: cars...@laptop:~$ dmesg [ 2665.368067] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 2665.550347] usb 2-1: configuration #1 chosen from 1 choice [ 2665.677846] usbcore: registered new interface driver usbserial [ 2665.678744] usbserial: USB Serial support registered for generic [ 2665.679423] usbcore: registered new interface driver usbserial_generic [ 2665.679428] usbserial: USB Serial Driver core [ 2665.699452] usbserial: USB Serial support registered for cp2101 [ 2665.700338] cp2101 2-1:1.0: cp2101 converter detected [ 2665.812054] usb 2-1: reset full speed USB device using uhci_hcd and address 2 [ 2665.959323] usb 2-1: cp2101 converter now attached to ttyUSB0 [ 2665.960230] usbcore: registered new interface driver cp2101 [ 2665.960236] cp2101: Silicon Labs CP2101/CP2102 RS232 serial adaptor driver v0.07 But on the Freerunner I don't get any new message, wenn I put the i-blue to the USB slot. My question now is, what do I have to install or configure, to get a connection between the Freerunner and the i-blue? I would be glad for any hint in the right direction. Thank you. Greetings, Carsten -- Hier ist mein öffentlicher GPG-Schlüssel: http://daswaldhorn.funpic.de/gpg.html = www.stopptdievorratsdatenspeicherung.de signature.asc Description: This is a digitally signed message part. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [Debian] read GPS logger i-blue 747 on freerunner over USB
Just for trouble shooting purposes: What happens if you connect an USB stick? Kind regards, Ed Carsten Gerlach wrote: Hello everybody, next week i want to go skiing and track the piste for Openstreetmap. But I don't want to use the Freerunner for that but the i-blue 747 from Transystem. I want to use the Freerunner only as storage device for the log files. So, I have installed mtkbabel for reading the logger. The kernel has the right module for this chipset, cp2101, wich I can load with modprobe cp2101. I know, that i have to set the Freerunner to USB host mode. I used the openmoko-panel to switch to USB host mode. My problem now is, the Freerunner doesn't record, that I connect the i-blue to it. On my Ubuntu desktop PC i get the following messages: cars...@laptop:~$ dmesg [ 2665.368067] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 2665.550347] usb 2-1: configuration #1 chosen from 1 choice [ 2665.677846] usbcore: registered new interface driver usbserial [ 2665.678744] usbserial: USB Serial support registered for generic [ 2665.679423] usbcore: registered new interface driver usbserial_generic [ 2665.679428] usbserial: USB Serial Driver core [ 2665.699452] usbserial: USB Serial support registered for cp2101 [ 2665.700338] cp2101 2-1:1.0: cp2101 converter detected [ 2665.812054] usb 2-1: reset full speed USB device using uhci_hcd and address 2 [ 2665.959323] usb 2-1: cp2101 converter now attached to ttyUSB0 [ 2665.960230] usbcore: registered new interface driver cp2101 [ 2665.960236] cp2101: Silicon Labs CP2101/CP2102 RS232 serial adaptor driver v0.07 But on the Freerunner I don't get any new message, wenn I put the i-blue to the USB slot. My question now is, what do I have to install or configure, to get a connection between the Freerunner and the i-blue? I would be glad for any hint in the right direction. Thank you. Greetings, Carsten ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
