Hi, I have a weird problem that i just can't figure out. I'm trying to flash this fso console image to my gta01.
http://downloads.freesmartphone.org/fso-stable/milestone5.1/om-gta01/fso-console-image-om-gta01.jffs2 and i always get this... ------------------------------------ $ sudo ./dfu-util -a rootfs -R -D ./fso-console-image-om-gta01.jffs2 dfu-util - (C) 2007 by OpenMoko Inc. This program is Free Software and has ABSOLUTELY NO WARRANTY Opening USB Device 0x0000:0x0000... Claiming USB DFU Runtime Interface... Determining device status: state = appIDLE, status = 0 Device really in Runtime Mode, send DFU detach request... Resetting USB... Opening USB Device... Found Runtime: [0x1457:0x5119] devnum=8, cfg=0, intf=0, alt=5, name="rootfs" Claiming USB DFU Interface... Setting Alternate Setting ... Determining device status: state = dfuIDLE, status = 0 dfuIDLE, continuing Transfer Size = 0x1000 bytes_per_hash=452853 Starting download: [##################################################dfu_download error -110 ] finished! unable to read DFU status ------------------------------------ I've also tried the two other console images on that page http://downloads.freesmartphone.org/fso-stable/milestone5.1/om-gta01/openmoko-fso-console-image-glibc-ipk--20090223-om-gta01.rootfs.jffs2 http://downloads.freesmartphone.org/fso-stable/milestone5.1/om-gta01/openmoko-fso-console-image-glibc-ipk--20090224-om-gta01.rootfs.jffs2 Both give the same problem. However, i can flash other distros/images perfectly fine eg, these all flash fine... http://downloads.freesmartphone.org/fso-stable/milestone5.1/om-gta01/openmoko-fso-illume-image-glibc-ipk--20090224-om-gta01.rootfs.jffs2 http://build.shr-project.org/shr-testing/images/om-gta01/shr-lite-image-om-gta01.jffs2 http://buildhost.automated.it/OM2007.2/Openmoko-openmoko-qtopia-image-glibc-ipk-P1-Snapshot-20080710-om-gta01.rootfs.jffs2 It may not be relevant but all the rootfs that don't work are 22mb in size. The ones that work are all bigger, starting at 37MB I've tried the following with no luck 1) Getting the latest version of dfu-util 2) Flashing from a different PC 3) Doing a nand erase rootfs 4) Using a different usb cable I'm running U-Boot 1.3-2-moko12 (Dec 17 2008 - 00:48:40) If it helps here's what my boot env looks like (i edited it recently to make it boot from uSD by default and so might have something to do with the problem if i did something wrong in there) -------------- GTA01Bv4 # printenv baudrate=115200 bootargs_base=rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8 bootdelay=1 menu_1=Set console to USB: setenv stdin usbtty; setenv stdout usbtty; setenv stderr usbtty menu_2=Set console to serial: setenv stdin serial; setenv stdout serial; setenv stderr serial menu_3=Power off: neo1973 power-off mtdids=nand0=neo1973-nand mtdparts=mtdparts=neo1973-nand:0x00040000(u-boot),0x00004000(u-boot_env),0x00200000(kernel),0x000a0000(splash),0x03d1c000(rootfs) quiet=1 sd_image_name=uImage splashimage=nand read.e 0x32000000 splash 0x5000; unzip 0x32000000 0x33d00000 0x96000 stdin=usbtty usbtty=cdc_acm boot_menu_timeout=65000 menu_5=Boot from SD with init: setenv bootargs ${bootargs_base} rootfstype=ext3 root=/dev/mmcblk0p2 rootdelay=5 ${mtdparts}; mmcinit; ext2load mmc 1 0x32000000 ${sd_image_name}; bootm 0x32000000 menu_4=Boot from Flash: setenv bootargs ${bootargs_base} ${mtdparts}; nand read.e 0x32000000 kernel; bootm 0x32000000 bootcmd=setenv bootargs ${bootargs_base} rootfstype=ext3 root=/dev/mmcblk0p2 rootdelay=5 ${mtdparts}; mmcinit; ext2load mmc 1 0x32000000 ${sd_image_name}; bootm 0x32000000 partition=nand0,0 mtddevnum=0 mtddevname=u-boot pcf50606_int1=0x53 stdout=usbtty stderr=usbtty Environment size: 1250/16380 bytes GTA01Bv4 # -------------- _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community