Re: Cleared to start Mass production

2008-06-06 Thread Lucas Bonnet
steve [EMAIL PROTECTED] writes:

  The latest update I have from the factory indicates that mass Production (
 that means running the SMT line without stopping to check stuff every two
 seconds) has been CLEARED TO START.

*pops the Champagne*


Thanks Openmoko!


Regards,
-- 
Lucas Bonnet
Bearstech - http://bearstech.com


pgpBFN2mi9mNf.pgp
Description: PGP signature
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-06 Thread Marcel
YAY!
Finally, we are arriving...

-Marcel

Am Donnerstag 05 Juni 2008 17:12:42 schrieb steve:
  The latest update I have from the factory indicates that mass Production (
 that means running the SMT line without stopping to check stuff every two
 seconds) has been CLEARED TO START.






 -Original Message-
 From: [EMAIL PROTECTED]
 [mailto:[EMAIL PROTECTED] On Behalf Of Dennis
 Wollersheim
 Sent: Monday, June 02, 2008 9:16 PM
 To: List for Openmoko community discussion
 Subject: Re: OpenMOKO availbility

 It will be available soon (within one month would be my guess).  Does
 anyone else have a better guess?

 You cannot book an order at present.  I reckon they will be able to ship to
 Pakistan.

 Cheers
 Dennis

 Masoom Alam wrote:
  Hi every one,
 
  I wanted to ask, that when the latest version of the openmoko will be
  available (seems a stupid question, as we can see a lot of posts on
  the mailing list :)).
  Actually, I dont want to wait for one year this time, therefore asking
  this question.
 
  Plus, is there is any possiblity at the moment to book an order for me
  in advance now?
 
  Plus, I want to ship the latest version to Pakistan, any
  recommendation in this regard?
 
  Regards,
  MM Alam
 
 
 
 
  --
  --
 
  ___
  Openmoko community mailing list
  community@lists.openmoko.org
  http://lists.openmoko.org/mailman/listinfo/community



___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-06 Thread Dotan Cohen
2008/6/5 steffen [EMAIL PROTECTED]:
   The latest update I have from the factory indicates that mass
   Production (that means running the SMT line without stopping to
   check stuff every two seconds) has been CLEARED TO START.

 hmm...so where is GNU/Hurd? ... :D


Ask RMS, but it appears that DNF has been GNU/Hurd to market:
http://games.slashdot.org/article.pl?sid=08/06/05/2155230

Dotan Cohen

http://what-is-what.com
http://gibberish.co.il
א-ב-ג-ד-ה-ו-ז-ח-ט-י-ך-כ-ל-ם-מ-ן-נ-ס-ע-ף-פ-ץ-צ-ק-ר-ש-ת

A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-06 Thread André Gaul
steffen wrote:
   The latest update I have from the factory indicates that mass
   Production (that means running the SMT line without stopping to
   check stuff every two seconds) has been CLEARED TO START.
 
 hmm...so where is GNU/Hurd? ... :D


As far as I know GNU/Hurd will be released as a bundle together with
Duke Nukem Forever. ;)

@steve: awesome news!

adios amigos,
André




signature.asc
Description: OpenPGP digital signature
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-06 Thread Benedikt Schindler
lol

@steve : thx for the good news

André Gaul schrieb:
 steffen wrote:
   
   The latest update I have from the factory indicates that mass
   Production (that means running the SMT line without stopping to
   check stuff every two seconds) has been CLEARED TO START.

 hmm...so where is GNU/Hurd? ... :D
 


 As far as I know GNU/Hurd will be released as a bundle together with
 Duke Nukem Forever. ;)

 @steve: awesome news!

 adios amigos,
 André


   
 

 ___
 Openmoko community mailing list
 community@lists.openmoko.org
 http://lists.openmoko.org/mailman/listinfo/community
   


___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


RE: Cleared to start Mass production

2008-06-06 Thread steve
It's way better than a triple Lindy

http://www.youtube.com/watch?v=2FUxUiMyt70feature=related

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dan Leinir
Turthra Jensen
Sent: Thursday, June 05, 2008 12:35 PM
To: List for Openmoko community discussion
Subject: Re: Cleared to start Mass production

Thursday 05 June 2008 steve wrote:
  The latest update I have from the factory indicates that mass 
 Production ( that means running the SMT line without stopping to check 
 stuff every two
 seconds) has been CLEARED TO START.


  This is roughly the best news since hmm... i'm not entirely sure, since
some really good news ;)

 -Original Message-
 From: [EMAIL PROTECTED]
 [mailto:[EMAIL PROTECTED] On Behalf Of Dennis 
 Wollersheim
 Sent: Monday, June 02, 2008 9:16 PM
 To: List for Openmoko community discussion
 Subject: Re: OpenMOKO availbility

 It will be available soon (within one month would be my guess).  Does 
 anyone else have a better guess?

 You cannot book an order at present.  I reckon they will be able to 
 ship to Pakistan.

 Cheers
 Dennis

 Masoom Alam wrote:
  Hi every one,
 
  I wanted to ask, that when the latest version of the openmoko will 
  be available (seems a stupid question, as we can see a lot of posts 
  on the mailing list :)).
  Actually, I dont want to wait for one year this time, therefore 
  asking this question.
 
  Plus, is there is any possiblity at the moment to book an order for 
  me in advance now?
 
  Plus, I want to ship the latest version to Pakistan, any 
  recommendation in this regard?
 
  Regards,
  MM Alam
 
 
 
 
  
  --
  --
 
  ___
  Openmoko community mailing list
  community@lists.openmoko.org
  http://lists.openmoko.org/mailman/listinfo/community


--
..Dan // Leinir..
http://www.leinir.dk/

  Co-
existence
  or no
existence

  - Piet Hein

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


RE: Cleared to start Mass production

2008-06-06 Thread steve
Ya.

You and me both. 

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Roland Häder
Sent: Thursday, June 05, 2008 9:48 AM
To: List for Openmoko community discussion
Subject: Re: Cleared to start Mass production

Hi,

On Thursday, 5. June 2008, steve wrote:
  The latest update I have from the factory indicates that mass 
 Production ( that means running the SMT line without stopping to check 
 stuff every two
 seconds) has been CLEARED TO START.

Is this the mail I have waited for? :D

--
(GNU) PGP ID: 0x4D385570


___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


RE: Cleared to start Mass production

2008-06-06 Thread steve
I'm trying to get the fremont thing figured out. It isnt Frys. It's a
wharehouse. So I will
Be asking a very patient and very very nice person to do me favor. You're
lucky, I'm charming, so we have a shot
At getting it done. 

Ship date will depend on when I get a slot. We passed preMP. That means I
get to run full bore 24/7. Other
Projects are on the lines, so maybe next week  we will get a line (SMT)
dedicated to us.


Then its build boards, assemble phones, test and ship.

It's kinda like Xmas in June! 


-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Federico Lorenzi
Sent: Thursday, June 05, 2008 9:22 AM
To: List for Openmoko community discussion
Subject: Re: Cleared to start Mass production

Yay at last! So when does your psuedorandom date generator say they will be
ready for shipping :)

Also, in a previous email you mentioned pickups, I assume this means we
would be able to go Fremont, CA, and actually fetch a FreeRunner, or is it
only for larger orders?

Cheers,
Federico

On Thu, Jun 5, 2008 at 5:12 PM, steve [EMAIL PROTECTED] wrote:
  The latest update I have from the factory indicates that mass 
 Production ( that means running the SMT line without stopping to check 
 stuff every two
 seconds) has been CLEARED TO START.






 -Original Message-
 From: [EMAIL PROTECTED]
 [mailto:[EMAIL PROTECTED] On Behalf Of Dennis 
 Wollersheim
 Sent: Monday, June 02, 2008 9:16 PM
 To: List for Openmoko community discussion
 Subject: Re: OpenMOKO availbility

 -BEGIN PGP SIGNED MESSAGE-
 Hash: SHA1

 It will be available soon (within one month would be my guess).  Does 
 anyone else have a better guess?

 You cannot book an order at present.  I reckon they will be able to 
 ship to Pakistan.

 Cheers
 Dennis

 Masoom Alam wrote:
 Hi every one,

 I wanted to ask, that when the latest version of the openmoko will be 
 available (seems a stupid question, as we can see a lot of posts on 
 the mailing list :)).
 Actually, I dont want to wait for one year this time, therefore 
 asking this question.

 Plus, is there is any possiblity at the moment to book an order for 
 me in advance now?

 Plus, I want to ship the latest version to Pakistan, any 
 recommendation in this regard?

 Regards,
 MM Alam




 -
 -
 --

 ___
 Openmoko community mailing list
 community@lists.openmoko.org
 http://lists.openmoko.org/mailman/listinfo/community

 - --
 - ---
 Dennis Wollersheim
 Lecturer, Health Information Management La Trobe University Bundoora 
 Victoria 3086 Room HS1:110
 (03) 9479 1763 (bh)
 0414 529 454 (mobile)
 http://homepage.cs.latrobe.edu.au/dewoller
 - ---
 -BEGIN PGP SIGNATURE-
 Version: GnuPG v1.4.6 (GNU/Linux)
 Comment: Using GnuPG with MultiZilla - http://enigmail.mozdev.org

 iD8DBQFIRMWF41ROt9TlFkoRAhFTAJ9DvMdVl2bbtGUHJFG2nR8Dde9mOgCg/KlF
 E4wU+XXesXAVFoo0dvnJLck=
 =GOB0
 -END PGP SIGNATURE-

 ___
 Openmoko community mailing list
 community@lists.openmoko.org
 http://lists.openmoko.org/mailman/listinfo/community


 ___
 Openmoko community mailing list
 community@lists.openmoko.org
 http://lists.openmoko.org/mailman/listinfo/community


___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-06 Thread Mohamed Hazem
Aren't we getting the videos of the device crash tests ?

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-06 Thread sumstultussedesquoque
If I beg and plead, would you post these on youtube or some such thing?  :-)

On Fri, Jun 6, 2008 at 4:15 PM, Mohamed Hazem [EMAIL PROTECTED] wrote:

 Aren't we getting the videos of the device crash tests ?

 ___
 Openmoko community mailing list
 community@lists.openmoko.org
 http://lists.openmoko.org/mailman/listinfo/community

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Cleared to start Mass production

2008-06-05 Thread steve
 The latest update I have from the factory indicates that mass Production (
that means running the SMT line without stopping to check stuff every two
seconds) has been CLEARED TO START.






-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dennis
Wollersheim
Sent: Monday, June 02, 2008 9:16 PM
To: List for Openmoko community discussion
Subject: Re: OpenMOKO availbility

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

It will be available soon (within one month would be my guess).  Does anyone
else have a better guess?

You cannot book an order at present.  I reckon they will be able to ship to
Pakistan.

Cheers
Dennis

Masoom Alam wrote:
 Hi every one,
 
 I wanted to ask, that when the latest version of the openmoko will be 
 available (seems a stupid question, as we can see a lot of posts on 
 the mailing list :)).
 Actually, I dont want to wait for one year this time, therefore asking 
 this question.
 
 Plus, is there is any possiblity at the moment to book an order for me 
 in advance now?
 
 Plus, I want to ship the latest version to Pakistan, any 
 recommendation in this regard?
 
 Regards,
 MM Alam
 
 
 
 
 --
 --
 
 ___
 Openmoko community mailing list
 community@lists.openmoko.org
 http://lists.openmoko.org/mailman/listinfo/community

- --
- ---
Dennis Wollersheim
Lecturer, Health Information Management
La Trobe University
Bundoora Victoria 3086
Room HS1:110
(03) 9479 1763 (bh)
0414 529 454 (mobile)
http://homepage.cs.latrobe.edu.au/dewoller
- ---
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with MultiZilla - http://enigmail.mozdev.org

iD8DBQFIRMWF41ROt9TlFkoRAhFTAJ9DvMdVl2bbtGUHJFG2nR8Dde9mOgCg/KlF
E4wU+XXesXAVFoo0dvnJLck=
=GOB0
-END PGP SIGNATURE-

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-05 Thread Dylan Semler
On Thu, Jun 5, 2008 at 11:12 AM, steve [EMAIL PROTECTED] wrote:

  The latest update I have from the factory indicates that mass Production (
 that means running the SMT line without stopping to check stuff every two
 seconds) has been CLEARED TO START.


: )


-- 
Dylan

Type faster. Use Dvorak:
http://dvzine.org
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-05 Thread ian douglas
... and there was much rejoicing!

steve wrote:
  The latest update I have from the factory indicates that mass Production (
 that means running the SMT line without stopping to check stuff every two
 seconds) has been CLEARED TO START.


___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-05 Thread Federico Lorenzi
Yay at last! So when does your psuedorandom date generator say they
will be ready for shipping :)

Also, in a previous email you mentioned pickups, I assume this means
we would be able to go Fremont, CA, and actually fetch a FreeRunner,
or is it only for larger orders?

Cheers,
Federico

On Thu, Jun 5, 2008 at 5:12 PM, steve [EMAIL PROTECTED] wrote:
  The latest update I have from the factory indicates that mass Production (
 that means running the SMT line without stopping to check stuff every two
 seconds) has been CLEARED TO START.






 -Original Message-
 From: [EMAIL PROTECTED]
 [mailto:[EMAIL PROTECTED] On Behalf Of Dennis
 Wollersheim
 Sent: Monday, June 02, 2008 9:16 PM
 To: List for Openmoko community discussion
 Subject: Re: OpenMOKO availbility

 -BEGIN PGP SIGNED MESSAGE-
 Hash: SHA1

 It will be available soon (within one month would be my guess).  Does anyone
 else have a better guess?

 You cannot book an order at present.  I reckon they will be able to ship to
 Pakistan.

 Cheers
 Dennis

 Masoom Alam wrote:
 Hi every one,

 I wanted to ask, that when the latest version of the openmoko will be
 available (seems a stupid question, as we can see a lot of posts on
 the mailing list :)).
 Actually, I dont want to wait for one year this time, therefore asking
 this question.

 Plus, is there is any possiblity at the moment to book an order for me
 in advance now?

 Plus, I want to ship the latest version to Pakistan, any
 recommendation in this regard?

 Regards,
 MM Alam




 --
 --

 ___
 Openmoko community mailing list
 community@lists.openmoko.org
 http://lists.openmoko.org/mailman/listinfo/community

 - --
 - ---
 Dennis Wollersheim
 Lecturer, Health Information Management
 La Trobe University
 Bundoora Victoria 3086
 Room HS1:110
 (03) 9479 1763 (bh)
 0414 529 454 (mobile)
 http://homepage.cs.latrobe.edu.au/dewoller
 - ---
 -BEGIN PGP SIGNATURE-
 Version: GnuPG v1.4.6 (GNU/Linux)
 Comment: Using GnuPG with MultiZilla - http://enigmail.mozdev.org

 iD8DBQFIRMWF41ROt9TlFkoRAhFTAJ9DvMdVl2bbtGUHJFG2nR8Dde9mOgCg/KlF
 E4wU+XXesXAVFoo0dvnJLck=
 =GOB0
 -END PGP SIGNATURE-

 ___
 Openmoko community mailing list
 community@lists.openmoko.org
 http://lists.openmoko.org/mailman/listinfo/community


 ___
 Openmoko community mailing list
 community@lists.openmoko.org
 http://lists.openmoko.org/mailman/listinfo/community


___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-05 Thread Antoine Reid
On Thu, Jun 5, 2008 at 11:12 AM, steve [EMAIL PROTECTED] wrote:

  The latest update I have from the factory indicates that mass Production (
 that means running the SMT line without stopping to check stuff every two
 seconds) has been CLEARED TO START.



Wonderful ! :)

-- 
Antoine Reid
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-05 Thread Roland Häder
Hi,

On Thursday, 5. June 2008, steve wrote:
  The latest update I have from the factory indicates that mass Production (
 that means running the SMT line without stopping to check stuff every two
 seconds) has been CLEARED TO START.

Is this the mail I have waited for? :D

-- 
(GNU) PGP ID: 0x4D385570


signature.asc
Description: This is a digitally signed message part.
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production #2

2008-06-05 Thread Roland Häder
Hi,

On Thursday, 5. June 2008, steve wrote:
  The latest update I have from the factory indicates that mass Production (
 that means running the SMT line without stopping to check stuff every two
 seconds) has been CLEARED TO START.

Is this the mail I have been waiting for? :D

Second try without signature.

-- 
(GNU) PGP ID: 0x4D385570

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-05 Thread Dan Leinir Turthra Jensen
Thursday 05 June 2008 steve wrote:
  The latest update I have from the factory indicates that mass Production (
 that means running the SMT line without stopping to check stuff every two
 seconds) has been CLEARED TO START.


  This is roughly the best news since hmm... i'm not entirely sure, since some 
really good news ;)

 -Original Message-
 From: [EMAIL PROTECTED]
 [mailto:[EMAIL PROTECTED] On Behalf Of Dennis
 Wollersheim
 Sent: Monday, June 02, 2008 9:16 PM
 To: List for Openmoko community discussion
 Subject: Re: OpenMOKO availbility

 It will be available soon (within one month would be my guess).  Does
 anyone else have a better guess?

 You cannot book an order at present.  I reckon they will be able to ship to
 Pakistan.

 Cheers
 Dennis

 Masoom Alam wrote:
  Hi every one,
 
  I wanted to ask, that when the latest version of the openmoko will be
  available (seems a stupid question, as we can see a lot of posts on
  the mailing list :)).
  Actually, I dont want to wait for one year this time, therefore asking
  this question.
 
  Plus, is there is any possiblity at the moment to book an order for me
  in advance now?
 
  Plus, I want to ship the latest version to Pakistan, any
  recommendation in this regard?
 
  Regards,
  MM Alam
 
 
 
 
  --
  --
 
  ___
  Openmoko community mailing list
  community@lists.openmoko.org
  http://lists.openmoko.org/mailman/listinfo/community


-- 
..Dan // Leinir..
http://www.leinir.dk/

  Co-
existence
  or no
existence

  - Piet Hein

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-05 Thread Sebastian Billaudelle
Wow!

I can't believe it;-)

Thanks!

Am Donnerstag, den 05.06.2008, 08:12 -0700 schrieb steve:

 The latest update I have from the factory indicates that mass Production (
 that means running the SMT line without stopping to check stuff every two
 seconds) has been CLEARED TO START.
 
 
 
 
 
 
 -Original Message-
 From: [EMAIL PROTECTED]
 [mailto:[EMAIL PROTECTED] On Behalf Of Dennis
 Wollersheim
 Sent: Monday, June 02, 2008 9:16 PM
 To: List for Openmoko community discussion
 Subject: Re: OpenMOKO availbility
 
 -BEGIN PGP SIGNED MESSAGE-
 Hash: SHA1
 
 It will be available soon (within one month would be my guess).  Does anyone
 else have a better guess?
 
 You cannot book an order at present.  I reckon they will be able to ship to
 Pakistan.
 
 Cheers
 Dennis
 
 Masoom Alam wrote:
  Hi every one,
  
  I wanted to ask, that when the latest version of the openmoko will be 
  available (seems a stupid question, as we can see a lot of posts on 
  the mailing list :)).
  Actually, I dont want to wait for one year this time, therefore asking 
  this question.
  
  Plus, is there is any possiblity at the moment to book an order for me 
  in advance now?
  
  Plus, I want to ship the latest version to Pakistan, any 
  recommendation in this regard?
  
  Regards,
  MM Alam
  
  
  
  
  --
  --
  
  ___
  Openmoko community mailing list
  community@lists.openmoko.org
  http://lists.openmoko.org/mailman/listinfo/community
 
 - --
 - ---
 Dennis Wollersheim
 Lecturer, Health Information Management
 La Trobe University
 Bundoora Victoria 3086
 Room HS1:110
 (03) 9479 1763 (bh)
 0414 529 454 (mobile)
 http://homepage.cs.latrobe.edu.au/dewoller
 - ---
 -BEGIN PGP SIGNATURE-
 Version: GnuPG v1.4.6 (GNU/Linux)
 Comment: Using GnuPG with MultiZilla - http://enigmail.mozdev.org
 
 iD8DBQFIRMWF41ROt9TlFkoRAhFTAJ9DvMdVl2bbtGUHJFG2nR8Dde9mOgCg/KlF
 E4wU+XXesXAVFoo0dvnJLck=
 =GOB0
 -END PGP SIGNATURE-
 
 ___
 Openmoko community mailing list
 community@lists.openmoko.org
 http://lists.openmoko.org/mailman/listinfo/community
 
 
 ___
 Openmoko community mailing list
 community@lists.openmoko.org
 http://lists.openmoko.org/mailman/listinfo/community

Please do not send me any Microsoft Office documents - I won't accept
them!
See http://www.gnu.org/philosophy/no-word-attachments.html for more
information!

Sorry!


signature.asc
Description: Dies ist ein digital signierter Nachrichtenteil
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-05 Thread Kevin Dean
Excellent! Thanks for the update!

On Thu, Jun 5, 2008 at 11:12 AM, steve [EMAIL PROTECTED] wrote:
  The latest update I have from the factory indicates that mass Production (
 that means running the SMT line without stopping to check stuff every two
 seconds) has been CLEARED TO START.






 -Original Message-
 From: [EMAIL PROTECTED]
 [mailto:[EMAIL PROTECTED] On Behalf Of Dennis
 Wollersheim
 Sent: Monday, June 02, 2008 9:16 PM
 To: List for Openmoko community discussion
 Subject: Re: OpenMOKO availbility

 -BEGIN PGP SIGNED MESSAGE-
 Hash: SHA1

 It will be available soon (within one month would be my guess).  Does anyone
 else have a better guess?

 You cannot book an order at present.  I reckon they will be able to ship to
 Pakistan.

 Cheers
 Dennis

 Masoom Alam wrote:
 Hi every one,

 I wanted to ask, that when the latest version of the openmoko will be
 available (seems a stupid question, as we can see a lot of posts on
 the mailing list :)).
 Actually, I dont want to wait for one year this time, therefore asking
 this question.

 Plus, is there is any possiblity at the moment to book an order for me
 in advance now?

 Plus, I want to ship the latest version to Pakistan, any
 recommendation in this regard?

 Regards,
 MM Alam




 --
 --

 ___
 Openmoko community mailing list
 community@lists.openmoko.org
 http://lists.openmoko.org/mailman/listinfo/community

 - --
 - ---
 Dennis Wollersheim
 Lecturer, Health Information Management
 La Trobe University
 Bundoora Victoria 3086
 Room HS1:110
 (03) 9479 1763 (bh)
 0414 529 454 (mobile)
 http://homepage.cs.latrobe.edu.au/dewoller
 - ---
 -BEGIN PGP SIGNATURE-
 Version: GnuPG v1.4.6 (GNU/Linux)
 Comment: Using GnuPG with MultiZilla - http://enigmail.mozdev.org

 iD8DBQFIRMWF41ROt9TlFkoRAhFTAJ9DvMdVl2bbtGUHJFG2nR8Dde9mOgCg/KlF
 E4wU+XXesXAVFoo0dvnJLck=
 =GOB0
 -END PGP SIGNATURE-

 ___
 Openmoko community mailing list
 community@lists.openmoko.org
 http://lists.openmoko.org/mailman/listinfo/community


 ___
 Openmoko community mailing list
 community@lists.openmoko.org
 http://lists.openmoko.org/mailman/listinfo/community


___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


RE: Cleared to start Mass production

2008-06-05 Thread Staley, Daniel L
That's the best news I've heard in months!

Thanks Steve!
-Dan Staley


From: steve [EMAIL PROTECTED]
Sent: Thursday, June 05, 2008 11:12 AM
To: 'List for Openmoko community discussion'
Subject: Cleared to start Mass production

 The latest update I have from the factory indicates that mass Production (
that means running the SMT line without stopping to check stuff every two
seconds) has been CLEARED TO START.






-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dennis
Wollersheim
Sent: Monday, June 02, 2008 9:16 PM
To: List for Openmoko community discussion
Subject: Re: OpenMOKO availbility

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

It will be available soon (within one month would be my guess).  Does anyone
else have a better guess?

You cannot book an order at present.  I reckon they will be able to ship to
Pakistan.

Cheers
Dennis

Masoom Alam wrote:
 Hi every one,

 I wanted to ask, that when the latest version of the openmoko will be
 available (seems a stupid question, as we can see a lot of posts on
 the mailing list :)).
 Actually, I dont want to wait for one year this time, therefore asking
 this question.

 Plus, is there is any possiblity at the moment to book an order for me
 in advance now?

 Plus, I want to ship the latest version to Pakistan, any
 recommendation in this regard?

 Regards,
 MM Alam




 --
 --

 ___
 Openmoko community mailing list
 community@lists.openmoko.org
 http://lists.openmoko.org/mailman/listinfo/community

- --
- ---
Dennis Wollersheim
Lecturer, Health Information Management
La Trobe University
Bundoora Victoria 3086
Room HS1:110
(03) 9479 1763 (bh)
0414 529 454 (mobile)
http://homepage.cs.latrobe.edu.au/dewoller
- ---
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with MultiZilla - http://enigmail.mozdev.org

iD8DBQFIRMWF41ROt9TlFkoRAhFTAJ9DvMdVl2bbtGUHJFG2nR8Dde9mOgCg/KlF
E4wU+XXesXAVFoo0dvnJLck=
=GOB0
-END PGP SIGNATURE-

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-05 Thread kazaam
Can someone here answer my question if at the moment v5 or v6 are produced?

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Congratulations! Re: Cleared to start Mass production

2008-06-05 Thread W. B. Kranendonk

Way to go! Please send best regards to all who have
made it possible so far :-))

Kind regards,

Boudewijn


--- steve [EMAIL PROTECTED] wrote:

  The latest update I have from the factory indicates
 that mass Production (
 that means running the SMT line without stopping to
 check stuff every two
 seconds) has been CLEARED TO START.
 
 
 
 
 
 
 -Original Message-
 From: [EMAIL PROTECTED]
 [mailto:[EMAIL PROTECTED] On
 Behalf Of Dennis
 Wollersheim
 Sent: Monday, June 02, 2008 9:16 PM
 To: List for Openmoko community discussion
 Subject: Re: OpenMOKO availbility
 
 -BEGIN PGP SIGNED MESSAGE-
 Hash: SHA1
 
 It will be available soon (within one month would be
 my guess).  Does anyone
 else have a better guess?
 
 You cannot book an order at present.  I reckon they
 will be able to ship to
 Pakistan.
 
 Cheers
 Dennis
 
 Masoom Alam wrote:
  Hi every one,
  
  I wanted to ask, that when the latest version of
 the openmoko will be 
  available (seems a stupid question, as we can see
 a lot of posts on 
  the mailing list :)).
  Actually, I dont want to wait for one year this
 time, therefore asking 
  this question.
  
  Plus, is there is any possiblity at the moment to
 book an order for me 
  in advance now?
  
  Plus, I want to ship the latest version to
 Pakistan, any 
  recommendation in this regard?
  
  Regards,
  MM Alam
  
  
  
  
 

--
  --
  
  ___
  Openmoko community mailing list
  community@lists.openmoko.org
 
 http://lists.openmoko.org/mailman/listinfo/community
 
 - --
 - ---
 Dennis Wollersheim
 Lecturer, Health Information Management
 La Trobe University
 Bundoora Victoria 3086
 Room HS1:110
 (03) 9479 1763 (bh)
 0414 529 454 (mobile)
 http://homepage.cs.latrobe.edu.au/dewoller
 - ---
 -BEGIN PGP SIGNATURE-
 Version: GnuPG v1.4.6 (GNU/Linux)
 Comment: Using GnuPG with MultiZilla -
 http://enigmail.mozdev.org
 

iD8DBQFIRMWF41ROt9TlFkoRAhFTAJ9DvMdVl2bbtGUHJFG2nR8Dde9mOgCg/KlF
 E4wU+XXesXAVFoo0dvnJLck=
 =GOB0
 -END PGP SIGNATURE-
 
 ___
 Openmoko community mailing list
 community@lists.openmoko.org
 http://lists.openmoko.org/mailman/listinfo/community
 
 
 ___
 Openmoko community mailing list
 community@lists.openmoko.org
 http://lists.openmoko.org/mailman/listinfo/community
 



  

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-05 Thread simarillion
Very good news, finally another milestone is done ;o)

Thank you Steve

Am Donnerstag 05 Juni 2008 17:12:42 schrieb steve:
  The latest update I have from the factory indicates that mass Production (
 that means running the SMT line without stopping to check stuff every two
 seconds) has been CLEARED TO START.






 -Original Message-
 From: [EMAIL PROTECTED]
 [mailto:[EMAIL PROTECTED] On Behalf Of Dennis
 Wollersheim
 Sent: Monday, June 02, 2008 9:16 PM
 To: List for Openmoko community discussion
 Subject: Re: OpenMOKO availbility

 It will be available soon (within one month would be my guess).  Does
 anyone else have a better guess?

 You cannot book an order at present.  I reckon they will be able to ship to
 Pakistan.

 Cheers
 Dennis

 Masoom Alam wrote:
  Hi every one,
 
  I wanted to ask, that when the latest version of the openmoko will be
  available (seems a stupid question, as we can see a lot of posts on
  the mailing list :)).
  Actually, I dont want to wait for one year this time, therefore asking
  this question.
 
  Plus, is there is any possiblity at the moment to book an order for me
  in advance now?
 
  Plus, I want to ship the latest version to Pakistan, any
  recommendation in this regard?
 
  Regards,
  MM Alam
 
 
 
 
  --
  --
 
  ___
  Openmoko community mailing list
  community@lists.openmoko.org
  http://lists.openmoko.org/mailman/listinfo/community

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-05 Thread ian douglas
Dan Leinir Turthra Jensen wrote:
   This is roughly the best news since hmm... i'm not entirely sure, since 
 some 
 really good news ;)

(insert political joke about the rumors of Hillary Clinton stepping down 
from the American presidential race on Friday...)

(and before that starts a flame war of any kind: I'm from Canada, but I 
live in the US and hate the 2-party system here)

Still, it's awesome news that the Freerunner is in mass production, w00t!

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-05 Thread Ilja O.
I can see death looking carefully at my piggy bank.
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-05 Thread Kosa




I'm soo happy tp read that!!

Kosa

- Un mundo mejor es posible -

steve escribi:

   The latest update I have from the factory indicates that mass Production (
that means running the SMT line without stopping to check stuff every two
seconds) has been CLEARED TO START.






-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of Dennis
Wollersheim
Sent: Monday, June 02, 2008 9:16 PM
To: List for Openmoko community discussion
Subject: Re: OpenMOKO availbility

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

It will be available soon (within one month would be my guess).  Does anyone
else have a better guess?

You cannot book an order at present.  I reckon they will be able to ship to
Pakistan.

Cheers
Dennis

Masoom Alam wrote:
  
  
Hi every one,

I wanted to ask, that when the latest version of the openmoko will be 
available (seems a stupid question, as we can see a lot of posts on 
the mailing list :)).
Actually, I dont want to wait for one year this time, therefore asking 
this question.

Plus, is there is any possiblity at the moment to book an order for me 
in advance now?

Plus, I want to ship the latest version to Pakistan, any 
recommendation in this regard?

Regards,
MM Alam




--
--

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community

  
  
- --
- ---
Dennis Wollersheim
Lecturer, Health Information Management
La Trobe University
Bundoora Victoria 3086
Room HS1:110
(03) 9479 1763 (bh)
0414 529 454 (mobile)
http://homepage.cs.latrobe.edu.au/dewoller
- ---
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with MultiZilla - http://enigmail.mozdev.org

iD8DBQFIRMWF41ROt9TlFkoRAhFTAJ9DvMdVl2bbtGUHJFG2nR8Dde9mOgCg/KlF
E4wU+XXesXAVFoo0dvnJLck=
=GOB0
-END PGP SIGNATURE-

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
  




___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-05 Thread Gianluigi
Alle 17:12, giovedì 5 giugno 2008, steve ha scritto:
  The latest update I have from the factory indicates that mass Production (
 that means running the SMT line without stopping to check stuff every two
 seconds) has been CLEARED TO START.

So a switch is waiting only to be pushed on for make we mega - giga - tera - 
peta (and so on) happy?

-- 
Immortality consists largely of boredom.
-- Zefrem Cochrane, Metamorphosis, stardate 3219.8

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-05 Thread Marco Trevisan (Treviño)
kazaam wrote:
 Can someone here answer my question if at the moment v5 or v6 are produced?

According to the past thread v5 vs v6, they should be led-fixed-v5 
freerunners.

Anyway... Well, finally the GREAT news I was waiting for! :P

-- 
Treviño's World - Life and Linux
http://www.3v1n0.net/


___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-05 Thread steffen
  The latest update I have from the factory indicates that mass
  Production (that means running the SMT line without stopping to
  check stuff every two seconds) has been CLEARED TO START.

hmm...so where is GNU/Hurd? ... :D

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-05 Thread Pietro m0nt0 Montorfano
Ilja O. ha scritto:
 I can see death looking carefully at my piggy bank.
 


Wonderful news and hey i'm worried about your piggy bank, please please 
don't kill it!!! :D

Cya!

Pietro

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-05 Thread Alexander Frøyseth

So the sale will begin soon then?
*Happy*

Alexander Frøyseth
steve skrev:

 The latest update I have from the factory indicates that mass Production (
that means running the SMT line without stopping to check stuff every two
seconds) has been CLEARED TO START.






-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dennis
Wollersheim
Sent: Monday, June 02, 2008 9:16 PM
To: List for Openmoko community discussion
Subject: Re: OpenMOKO availbility

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

It will be available soon (within one month would be my guess).  Does anyone
else have a better guess?

You cannot book an order at present.  I reckon they will be able to ship to
Pakistan.

Cheers
Dennis

Masoom Alam wrote:
  

Hi every one,

I wanted to ask, that when the latest version of the openmoko will be 
available (seems a stupid question, as we can see a lot of posts on 
the mailing list :)).
Actually, I dont want to wait for one year this time, therefore asking 
this question.


Plus, is there is any possiblity at the moment to book an order for me 
in advance now?


Plus, I want to ship the latest version to Pakistan, any 
recommendation in this regard?


Regards,
MM Alam




--
--

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community



- --
- ---
Dennis Wollersheim
Lecturer, Health Information Management
La Trobe University
Bundoora Victoria 3086
Room HS1:110
(03) 9479 1763 (bh)
0414 529 454 (mobile)
http://homepage.cs.latrobe.edu.au/dewoller
- ---
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with MultiZilla - http://enigmail.mozdev.org

iD8DBQFIRMWF41ROt9TlFkoRAhFTAJ9DvMdVl2bbtGUHJFG2nR8Dde9mOgCg/KlF
E4wU+XXesXAVFoo0dvnJLck=
=GOB0
-END PGP SIGNATURE-

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
  


___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: Cleared to start Mass production

2008-06-05 Thread David Samblas Martinez


Thanks, thanks to you all coreteam, fanboys, critical ones, wanabees and geeks 
in general, and any other kind of entity thanks you all to make it posible.

--- El jue, 5/6/08, steve [EMAIL PROTECTED] escribió:

 De: steve [EMAIL PROTECTED]
 Asunto: Cleared to start Mass production
 Para: 'List for Openmoko community discussion' 
 community@lists.openmoko.org
 Fecha: jueves, 5 junio, 2008 5:12
 The latest update I have from the factory indicates that
 mass Production (
 that means running the SMT line without stopping to check
 stuff every two
 seconds) has been CLEARED TO START.
 
 
 
 
 
 
 -Original Message-
 From: [EMAIL PROTECTED]
 [mailto:[EMAIL PROTECTED] On Behalf Of
 Dennis
 Wollersheim
 Sent: Monday, June 02, 2008 9:16 PM
 To: List for Openmoko community discussion
 Subject: Re: OpenMOKO availbility
 
 -BEGIN PGP SIGNED MESSAGE-
 Hash: SHA1
 
 It will be available soon (within one month would be my
 guess).  Does anyone
 else have a better guess?
 
 You cannot book an order at present.  I reckon they will be
 able to ship to
 Pakistan.
 
 Cheers
 Dennis
 
 Masoom Alam wrote:
  Hi every one,
  
  I wanted to ask, that when the latest version of the
 openmoko will be 
  available (seems a stupid question, as we can see a
 lot of posts on 
  the mailing list :)).
  Actually, I dont want to wait for one year this time,
 therefore asking 
  this question.
  
  Plus, is there is any possiblity at the moment to book
 an order for me 
  in advance now?
  
  Plus, I want to ship the latest version to Pakistan,
 any 
  recommendation in this regard?
  
  Regards,
  MM Alam
  
  
  
  
 
 --
  --
  
  ___
  Openmoko community mailing list
  community@lists.openmoko.org
  http://lists.openmoko.org/mailman/listinfo/community
 
 - --
 - ---
 Dennis Wollersheim
 Lecturer, Health Information Management
 La Trobe University
 Bundoora Victoria 3086
 Room HS1:110
 (03) 9479 1763 (bh)
 0414 529 454 (mobile)
 http://homepage.cs.latrobe.edu.au/dewoller
 - ---
 -BEGIN PGP SIGNATURE-
 Version: GnuPG v1.4.6 (GNU/Linux)
 Comment: Using GnuPG with MultiZilla -
 http://enigmail.mozdev.org
 
 iD8DBQFIRMWF41ROt9TlFkoRAhFTAJ9DvMdVl2bbtGUHJFG2nR8Dde9mOgCg/KlF
 E4wU+XXesXAVFoo0dvnJLck=
 =GOB0
 -END PGP SIGNATURE-
 
 ___
 Openmoko community mailing list
 community@lists.openmoko.org
 http://lists.openmoko.org/mailman/listinfo/community
 
 
 ___
 Openmoko community mailing list
 community@lists.openmoko.org
 http://lists.openmoko.org/mailman/listinfo/community


  __ 
Enviado desde Correo Yahoo! La bandeja de entrada más inteligente.

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community