Re: NO VOICE WHEN USING VOIP IN QTOPIA
You can also try this: mount the qtopia image, insert this into /etc/init.d/qpe on line 64: alsactl -f /etc/gsmhandset.state restore Save the image to a jffs2 file and re-flash the device. I've no idea how this differs from the instructions you had earlier, but I don't think it hurts either. Worked for me. 2008/1/16, 左 国坤 [EMAIL PROTECTED]: Hi, Lorn, I have tried alsactl -f /etc/alsa/capturehandset.state restore but no any improvement. can you please tell me when you release your improved snapshot? Regards. George - Original Message - 件名: RE: NO VOICE WHEN USING VOIP IN QTOPIA From: LORN POTTER [EMAIL PROTECTED] To: [EMAIL PROTECTED],LIST FOR OPENMOKO COMMUNITY DISCUSSION community@lists.openmoko.org 日付: 15-01-2008 10:39 am 左 国坤 wrote: Hi, all I am using VOIP by compile Qtopia 4.3.1 Open source for Neo1973 Phase1. I need your help to clear some problems. 1, Incoming call ringtone OK, Answer OK, Hold OK, But No VOICE from Caller, and vice versa. 2, Out Call Keeping with 'Dialing' status, NO Call Tone, No connection to the other end I am a newbie in using Qtopia, maybe something missed in setting when building. Nope. something is missing from Qtopia :) We are currently working on this, I think I will post a new snapshot image when voip is working. You man manually run alsactl -f /etc/alsa/capturehandset.state restore and try that. -- Lorn 'ljp' Potter Software Engineer, Systems Group, MES, Trolltech ___ OpenMoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ OpenMoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: NO VOICE WHEN USING VOIP IN QTOPIA
On 1/17/08, Mikael Lammentausta [EMAIL PROTECTED] wrote: 2008/1/16, 左 国坤 [EMAIL PROTECTED]: Hi, Lorn, I have tried alsactl -f /etc/alsa/capturehandset.state restore but no any improvement. can you please tell me when you release your improved snapshot? Regards. George - Original Message - 件名: RE: NO VOICE WHEN USING VOIP IN QTOPIA From: LORN POTTER [EMAIL PROTECTED] To: [EMAIL PROTECTED] ,LIST FOR OPENMOKO COMMUNITY DISCUSSION community@lists.openmoko.org 日付: 15-01-2008 10:39 am 左 国坤 wrote: Hi, all I am using VOIP by compile Qtopia 4.3.1 Open source for Neo1973 Phase1. I need your help to clear some problems. 1, Incoming call ringtone OK, Answer OK, Hold OK, But No VOICE from Caller, and vice versa. 2, Out Call Keeping with 'Dialing' status, NO Call Tone, No connection to the other end I am a newbie in using Qtopia, maybe something missed in setting when building. Nope. something is missing from Qtopia :) We are currently working on this, I think I will post a new snapshot image when voip is working. You man manually run alsactl -f /etc/alsa/capturehandset.state restore and try that. You can also try this: mount the qtopia image, insert this into /etc/init.d/qpe on line 64: alsactl -f /etc/gsmhandset.state restore Save the image to a jffs2 file and re-flash the device. I've no idea how this differs from the instructions you had earlier, but I don't think it hurts either. Worked for me. It's probably a timing issue tied to when the GSM chip is powered up. -Nick ___ OpenMoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
RE: NO VOICE WHEN USING VOIP IN QTOPIA
Hi, Nick tks for your advice. how can i kill the gsm function in software level? if using openmoko fw, the gsm can be turned down easily, but when using Qtopia, it seems no menu to kill gsm module or process. Maybe I have to do some configure before build Qtopia source, if it is, how to do it? By the way, I am using a USB connection to internet via bridging host PC ethernet, but not GSM, when using VoIP. Your any good advice will be highly appreciated. Regards. George - Original Message - Subject: RE: NO VOICE WHEN USING VOIP IN QTOPIA From: NICK GUENTHER [EMAIL PROTECTED] To: LIST FOR OPENMOKO COMMUNITY DISCUSSION community@lists.openmoko.org Date: 17-01-2008 7:50 pm On 1/17/08, Mikael Lammentausta [EMAIL PROTECTED] wrote: 2008/1/16, 左 国坤 [EMAIL PROTECTED]: Hi, Lorn, I have tried alsactl -f /etc/alsa/capturehandset.state restore but no any improvement. can you please tell me when you release your improved snapshot? Regards. George - Original Message - 件名: RE: NO VOICE WHEN USING VOIP IN QTOPIA From: LORN POTTER [EMAIL PROTECTED] To: [EMAIL PROTECTED] ,LIST FOR OPENMOKO COMMUNITY DISCUSSION community@lists.openmoko.org 日付: 15-01-2008 10:39 am 左 国坤 wrote: Hi, all I am using VOIP by compile Qtopia 4.3.1 Open source for Neo1973 Phase1. I need your help to clear some problems. 1, Incoming call ringtone OK, Answer OK, Hold OK, But No VOICE from Caller, and vice versa. 2, Out Call Keeping with 'Dialing' status, NO Call Tone, No connection to the other end I am a newbie in using Qtopia, maybe something missed in setting when building. Nope. something is missing from Qtopia :) We are currently working on this, I think I will post a new snapshot image when voip is working. You man manually run alsactl -f /etc/alsa/capturehandset.state restore and try that. You can also try this: mount the qtopia image, insert this into /etc/init.d/qpe on line 64: alsactl -f /etc/gsmhandset.state restore Save the image to a jffs2 file and re-flash the device. I've no idea how this differs from the instructions you had earlier, but I don't think it hurts either. Worked for me. It's probably a timing issue tied to when the GSM chip is powered up. -Nick ___ OpenMoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ OpenMoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
RE: NO VOICE WHEN USING VOIP IN QTOPIA
Hi, Nick, I have tried the method of Hi, Nick, I have tried Mikael suggested, no any improved. - Original Message - Subject: RE: NO VOICE WHEN USING VOIP IN QTOPIA From: NICK GUENTHER [EMAIL PROTECTED] To: 033$B:8033(B 033$B9Q:%033(B [EMAIL PROTECTED],LIST FOR OPENMOKO COMMUNITY DISCUSSION community@lists.openmoko.org Date: 18-01-2008 8:16 am 2008/1/17 左 国坤 [EMAIL PROTECTED]: Hi, Nick tks for your advice. Oh! Oh no, don't be thankful. It was totally a guess. I ONE HUNDRED PERCENT disclaim that I know about anything I'm talking about. Try what Mikael suggested first and report back. (btw you can edit qpe.sh onboard the neo, just ssh into it and use vi--there's no need to reflash the entire image) how can i kill the gsm function in software level? if using openmoko fw, the gsm can be turned down easily, but when using Qtopia, it seems no menu to kill gsm module or process. Maybe I have to do some configure before build Qtopia source, if it is, how to do it? I'll respond to this for the curiousity, not for giving actual helpful advice: I'm not sure. Maybe buried in Main Menu-Settings-Call Networks-GSM somewhere. Or maybe if you go into Home Screen-Options-Options-Airplane Safe Mode and out again. By the way, I am using a USB connection to internet via bridging host PC ethernet, but not GSM, when using VoIP. ___ OpenMoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: NO VOICE WHEN USING VOIP IN QTOPIA
2008/1/17 左 国坤 [EMAIL PROTECTED]: Hi, Nick tks for your advice. Oh! Oh no, don't be thankful. It was totally a guess. I ONE HUNDRED PERCENT disclaim that I know about anything I'm talking about. Try what Mikael suggested first and report back. (btw you can edit qpe.sh onboard the neo, just ssh into it and use vi--there's no need to reflash the entire image) how can i kill the gsm function in software level? if using openmoko fw, the gsm can be turned down easily, but when using Qtopia, it seems no menu to kill gsm module or process. Maybe I have to do some configure before build Qtopia source, if it is, how to do it? I'll respond to this for the curiousity, not for giving actual helpful advice: I'm not sure. Maybe buried in Main Menu-Settings-Call Networks-GSM somewhere. Or maybe if you go into Home Screen-Options-Options-Airplane Safe Mode and out again. By the way, I am using a USB connection to internet via bridging host PC ethernet, but not GSM, when using VoIP. ___ OpenMoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: NO VOICE WHEN USING VOIP IN QTOPIA
左 国坤 wrote: Hi, Nick tks for your advice. how can i kill the gsm function in software level? if using openmoko fw, the gsm can be turned down easily, but when using Qtopia, it seems no menu to kill gsm module or process. Maybe I have to do some configure before build Qtopia source, if it is, how to do it? By the way, I am using a USB connection to internet via bridging host PC ethernet, but not GSM, when using VoIP. Your any good advice will be highly appreciated. Perhaps airplane mode is what you want?: From the homescreen Options-Profile-(scroll down) airplane mode or from Settings-Profiles-Airplane Mode other than that, I could add scripts to the Devtools to turn off the power to gsm. -- Lorn 'ljp' Potter Software Engineer, Systems Group, MES, Trolltech ___ OpenMoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
RE: NO VOICE WHEN USING VOIP IN QTOPIA
Hi, Lorn, thank you for your suggestions. I have switched to Aireplane mode after add alsactl -f /etc/gsmhandset restore to /etc/init.d/qpe on Line 64. and then restart device. But now no any call can be received and when do a out call, a warning tell me 'You can't make a call at Airplane mode'. any advice? Regards. George - Original Message - Subject: RE: NO VOICE WHEN USING VOIP IN QTOPIA From: LORN POTTER [EMAIL PROTECTED] To: [EMAIL PROTECTED],LIST FOR OPENMOKO COMMUNITY DISCUSSION community@lists.openmoko.org Date: 18-01-2008 8:16 am 左 国坤 wrote: Hi, Nick tks for your advice. how can i kill the gsm function in software level? if using openmoko fw, the gsm can be turned down easily, but when using Qtopia, it seems no menu to kill gsm module or process. Maybe I have to do some configure before build Qtopia source, if it is, how to do it? By the way, I am using a USB connection to internet via bridging host PC ethernet, but not GSM, when using VoIP. Your any good advice will be highly appreciated. Perhaps airplane mode is what you want?: From the homescreen Options-Profile-(scroll down) airplane mode or from Settings-Profiles-Airplane Mode other than that, I could add scripts to the Devtools to turn off the power to gsm. -- Lorn 'ljp' Potter Software Engineer, Systems Group, MES, Trolltech ___ OpenMoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: NO VOICE WHEN USING VOIP IN QTOPIA
Lorn Potter wrote: 左 国坤 wrote: Hi, Nick tks for your advice. how can i kill the gsm function in software level? if using openmoko fw, the gsm can be turned down easily, but when using Qtopia, it seems no menu to kill gsm module or process. Maybe I have to do some configure before build Qtopia source, if it is, how to do it? By the way, I am using a USB connection to internet via bridging host PC ethernet, but not GSM, when using VoIP. Your any good advice will be highly appreciated. Perhaps airplane mode is what you want?: From the homescreen Options-Profile-(scroll down) airplane mode or from Settings-Profiles-Airplane Mode other than that, I could add scripts to the Devtools to turn off the power to gsm. Airplane mode wasn't actually working on the Neo. I just fixed it though, so it will work in the next snapshot. -- Lorn 'ljp' Potter Software Engineer, Systems Group, MES, Trolltech ___ OpenMoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
RE: NO VOICE WHEN USING VOIP IN QTOPIA
Dear Lorn, tks for your reply. Where can I DL your snapshot? Sorry for my no more information about this. Best Regards. George - Original Message - Subject: RE: NO VOICE WHEN USING VOIP IN QTOPIA From: LORN POTTER [EMAIL PROTECTED] To: LIST FOR OPENMOKO COMMUNITY DISCUSSION community@lists.openmoko.org CC: [EMAIL PROTECTED] Date: 18-01-2008 9:56 am Lorn Potter wrote: 左 国坤 wrote: Hi, Nick tks for your advice. how can i kill the gsm function in software level? if using openmoko fw, the gsm can be turned down easily, but when using Qtopia, it seems no menu to kill gsm module or process. Maybe I have to do some configure before build Qtopia source, if it is, how to do it? By the way, I am using a USB connection to internet via bridging host PC ethernet, but not GSM, when using VoIP. Your any good advice will be highly appreciated. Perhaps airplane mode is what you want?: From the homescreen Options-Profile-(scroll down) airplane mode or from Settings-Profiles-Airplane Mode other than that, I could add scripts to the Devtools to turn off the power to gsm. Airplane mode wasn't actually working on the Neo. I just fixed it though, so it will work in the next snapshot. -- Lorn 'ljp' Potter Software Engineer, Systems Group, MES, Trolltech ___ OpenMoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: NO VOICE WHEN USING VOIP IN QTOPIA
左 国坤 wrote: Hi, Lorn, thank you for your suggestions. I have switched to Aireplane mode after add alsactl -f /etc/gsmhandset restore to /etc/init.d/qpe on Line 64. and then restart device. But now no any call can be received and when do a out call, a warning tell me 'You can't make a call at Airplane mode'. You shouldn't need to turn off the gsm/modem to make a voip call. If there's a voip and gsm network active at the same time, Qtopia should popup a dialog and ask the user which one to use (in the case of a dialed number). as for a uri, it will always use voip, for obvious reasons. Lorn 'ljp' Potter Software Engineer, Systems Group, MES, Trolltech ___ OpenMoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: NO VOICE WHEN USING VOIP IN QTOPIA
左 国坤 wrote: Dear Lorn, tks for your reply. Where can I DL your snapshot? Sorry for my no more information about this. Best Regards. George I am still working on voip, once I know it works for the Neo, I will put a new snapshot up at qtopia.net, and will let you know. -- Lorn 'ljp' Potter Software Engineer, Systems Group, MES, Trolltech ___ OpenMoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
RE: NO VOICE WHEN USING VOIP IN QTOPIA
Hi, Lorn, Looking forward to your snapshot release. You shouldn't need to turn off the gsm/modem to make a voip call. If there's a voip and gsm network active at the same time, Qtopia should popup a dialog and ask the user which one to use (in the case of a dialed number). as for a uri, it will always use voip, for obvious reasons. In fact, In my test circumstom, no GSM network is available. So I select VOIP by Settings--Call Networks. Best Regards. George - Original Message - Subject: RE: NO VOICE WHEN USING VOIP IN QTOPIA From: LORN POTTER [EMAIL PROTECTED] To: [EMAIL PROTECTED],LIST FOR OPENMOKO COMMUNITY DISCUSSION community@lists.openmoko.org Date: 18-01-2008 10:33 am 左 国坤 wrote: Dear Lorn, tks for your reply. Where can I DL your snapshot? Sorry for my no more information about this. Best Regards. George I am still working on voip, once I know it works for the Neo, I will put a new snapshot up at qtopia.net, and will let you know. -- Lorn 'ljp' Potter Software Engineer, Systems Group, MES, Trolltech ___ OpenMoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
No Voice when using Voip in Qtopia
Hi, all I am using VOIP by compile Qtopia 4.3.1 Open source for Neo1973 Phase1. I need your help to clear some problems. 1, Incoming call ringtone OK, Answer OK, Hold OK, But No VOICE from Caller, and vice versa. 2, Out Call Keeping with 'Dialing' status, NO Call Tone, No connection to the other end I am a newbie in using Qtopia, maybe something missed in setting when building. Looking forward to your kind and prompt help. Regards. George ___ OpenMoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: No Voice when using Voip in Qtopia
左 国坤 wrote: Hi, all I am using VOIP by compile Qtopia 4.3.1 Open source for Neo1973 Phase1. I need your help to clear some problems. 1, Incoming call ringtone OK, Answer OK, Hold OK, But No VOICE from Caller, and vice versa. 2, Out Call Keeping with 'Dialing' status, NO Call Tone, No connection to the other end I am a newbie in using Qtopia, maybe something missed in setting when building. Nope. something is missing from Qtopia :) We are currently working on this, I think I will post a new snapshot image when voip is working. You man manually run alsactl -f /etc/alsa/capturehandset.state restore and try that. -- Lorn 'ljp' Potter Software Engineer, Systems Group, MES, Trolltech ___ OpenMoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
RE: No Voice when using Voip in Qtopia
Hey Lorn, if you have time could you comment on what else is new or fixed since your last image was posted? Thanks a bunch, Richard -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lorn Potter Sent: Monday, January 14, 2008 6:40 PM To: [EMAIL PROTECTED]; List for OpenMoko community discussion Subject: Re: No Voice when using Voip in Qtopia 左 国坤 wrote: Hi, all I am using VOIP by compile Qtopia 4.3.1 Open source for Neo1973 Phase1. I need your help to clear some problems. 1, Incoming call ringtone OK, Answer OK, Hold OK, But No VOICE from Caller, and vice versa. 2, Out Call Keeping with 'Dialing' status, NO Call Tone, No connection to the other end I am a newbie in using Qtopia, maybe something missed in setting when building. Nope. something is missing from Qtopia :) We are currently working on this, I think I will post a new snapshot image when voip is working. You man manually run alsactl -f /etc/alsa/capturehandset.state restore and try that. -- Lorn 'ljp' Potter Software Engineer, Systems Group, MES, Trolltech ___ OpenMoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ OpenMoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
