--- On Fri, 2/18/11, HeaDCase wrote:
> Another thing is that after a cold reset (pulling the
> battery for a second)
> the HW clock is reset to 01.01.2000.
That is probably caused by a dried up backup battery. People have replaced it
with capacitors, see the archives.
Boudewijn
___
HW clock is reset to 01.01.2000.
--
View this message in context:
http://openmoko-public-mailinglists.1958.n2.nabble.com/Re-QtMoko-v31-tp6039313p6039313.html
Sent from the Openmoko Community mailing list archive at Nabble.com.
___
Openmoko community ma
Hi
Does anyone knows if finally this [1] patch was applied to debian kernel?
I cannot set rtc, time is lost in every suspend/restart. The same sympthoms as
[2]
I know I could boot another distro and reset rtc, but I didn't wanted to erase
my qtmoko installation in NAND, and I cannot boot any d
Marco wrote:
> Hello everyone,
> although someone already mentioned this problem, I couldn't find a
> solution to it. I build QtMoko from git sources following the guide on the
> wiki, but when it comes to running it (./runqtopia) I get this error:
>
> Use of uninitialized value $word in concate
Hello everyone,
although someone already mentioned this problem, I couldn't find a solution to
it. I build QtMoko from git sources following the guide on the wiki, but when it
comes to running it (./runqtopia) I get this error:
Use of uninitialized value $word in concatenation (.) or string at
b
2011-01-30@19:00 Daniel MT
> Hey there.
> Every time I restart the system the date/ time is reseted to the epoch
> (using v31 and v32 installed on the sd card). While booting I get
> several suspicious messages like
> RTC_RD_Time: invalid argument
> or
> pcf50633-rtc pcf50633-rtc.0: hctosys: unable
Hey there.
Every time I restart the system the date/ time is reseted to the epoch
(using v31 and v32 installed on the sd card). While booting I get
several suspicious messages like
RTC_RD_Time: invalid argument
or
pcf50633-rtc pcf50633-rtc.0: hctosys: unable to read the hardware clock
I attached t
Yes, this is exactly what I meant!
I understood this to be a request for a notification of the form "message sent
to GSM provider" or "couldn't send message so I stuck it in the pending
queue/draft folder/wherever" so that you don't have to check the draft folder
each time to see whether the mes
On Monday 17 January 2011, giacomo 'giotti' mariani wrote:
> > Hi! thank you for this new release!
> > [...]
> > - a message to confirm that an sms was sent;
> > [...]
> >
> > greetings!
> > Joif
>
> Hi,
> I think that SMS confirmation messages are a service offered by
> phone company (not fo
Hi! thank you for this new release!
[...]
- a message to confirm that an sms was sent;
[...]
greetings!
Joif
Hi,
I think that SMS confirmation messages are a service offered by
phone company (not for free).
Moreover you can check in the draft folder in qtmoko messages
application to see i
On 12/31/10, Hrabosh wrote:
> BTW ... I§m the only one having difficulties using USB host mode in v31?
I don't know about USB host mode, but I can't use usb mass storage
with v31. Module g_ether is 'always' busy :)
___
Openmoko community mailing list
c
Hi! thank you for this new release!
Qtmoko v31 with the latest u-boot from Gennady.
bugs:
- like in v30 the gps remains on, it turns off only after a sospension
- an evergreen :) power management bug, I didn't try the workaround from
Yoric Kotchukov but IMHO it is not comfortable to do
Same problem here, I suppose that we need a patch for NeronGPS. This
problem is present from early versions of QtMoko!
Greetings
Joif
Il 15/01/2011 11:46, Philip Rhoades ha scritto:
People,
When I use this app and have recording "On", if I go through a tunnel
or something and lose the satell
People,
When I use this app and have recording "On", if I go through a tunnel or
something and lose the satellite fix, even very briefly - when I look at
the trace of the journey later it is truncated from the point where I
lost the fix - shouldn't the trace continue or at least start a new
t
On Thursday 13 January 2011, sferic wrote:
> Thank you for the hint!.
> I followed the references and boot v31 with Qi. For this I created the
> empty file 'noboot-GTA02' and put it to /boot in the partitions for debian
> and shr-u. This works just fine.
> But:
> After I use Debian on the 1st Parti
-
View this message in context:
http://openmoko-public-mailinglists.1958.n2.nabble.com/QtMoko-v31-tp5881425p5918157.html
Sent from the Openmoko Community mailing list archive at Nabble.com.
___
Openmoko community mailing list
community@lis
ts.1958.n2.nabble.com/QtMoko-v31-tp5881425p5914280.html
Sent from the Openmoko Community mailing list archive at Nabble.com.
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Thanks Vincent,
I had wondered if that was wrong when I checked with uname. Anyway, I
just did another apt-get dist-upgrade, and it upgraded 3 more packages -
qtmoko-kernel-images, qtmoko-kernel and qtmoko. This time it requested
confirmation to change /boot/append-GTA02 which I'm sure it didn't d
On Sat, Jan 8, 2011 at 4:01 PM, Vincent Meurisse
wrote:
>> I've been running QtMoko v26 from my uSD card (Kingston) more or less
>> successfully. I wanted to upgrade to v31, so I added the qtmoko
>> repository as per the instructions on the wiki, did an apt-get update
>> and apt-get dist-upgrade.
> I've been running QtMoko v26 from my uSD card (Kingston) more or less
> successfully. I wanted to upgrade to v31, so I added the qtmoko
> repository as per the instructions on the wiki, did an apt-get update
> and apt-get dist-upgrade. When I rebooted the phone, I get only a
> terminal login prom
Hi,
I've been running QtMoko v26 from my uSD card (Kingston) more or less
successfully. I wanted to upgrade to v31, so I added the qtmoko
repository as per the instructions on the wiki, did an apt-get update
and apt-get dist-upgrade. When I rebooted the phone, I get only a
terminal login prompt.
M
2011-01...@18:07 Radek Polak
> > - I'm no longer able to connect to wifi and while I try I see console
> > messages over the framebuffer graphic screen - gprs does not connect too
>
> No longer means that in v30 it worked? I dont see any messages and my wifi
> connects. Maybe we have different
В Птн, 07/01/2011 в 03:16 -0800, sferic пишет:
> Hi,
>
> I would like to use the new QtMoko v31 as my Dailly-Phone on NAND parallel
> to two other Distros and a big Documents-Partition on my SD-Card. Till v26 I
> could boot QtMoko over U-Boot 1.3.2-moko 12 (AUX + Power) and the o
sferic wrote:
> I would like to use the new QtMoko v31 as my Dailly-Phone on NAND parallel
> to two other Distros and a big Documents-Partition on my SD-Card. Till v26
> I could boot QtMoko over U-Boot 1.3.2-moko 12 (AUX + Power) and the other
> two over Qi (Power with or without AU
On Fri, 7 Jan 2011, sferic wrote:
Hi,
I would like to use the new QtMoko v31 as my Dailly-Phone on NAND parallel
to two other Distros and a big Documents-Partition on my SD-Card. Till v26 I
could boot QtMoko over U-Boot 1.3.2-moko 12 (AUX + Power) and the other two
over Qi (Power with or
Hi,
I would like to use the new QtMoko v31 as my Dailly-Phone on NAND parallel
to two other Distros and a big Documents-Partition on my SD-Card. Till v26 I
could boot QtMoko over U-Boot 1.3.2-moko 12 (AUX + Power) and the other two
over Qi (Power with or without AUX). With the new v31 this is
BTW ... mine Eyepiece did ask for some aditional libraries on the first
run and then succesfully apt-got them.
Zb.
Radek Polak píše v St 05. 01. 2011 v 10:34 +0100:
> Nashvin Gangaram wrote:
>
> > Hi Radek
> >
> > Everything's working great in QtMoko v31... ex
Thank you very much
urodelo
On Wed, 05 Jan 2011 23:11:51 +0100, Vincent Meurisse
wrote:
Hello,
I (finally) uploaded the new Debian packages for QtMoko v31.
Make sure you read the releases notes
<http://qtmoko.org/wiki/Update#Update_to_v31> or you might end-up with no
sound during
Hello,
I (finally) uploaded the new Debian packages for QtMoko v31.
Make sure you read the releases notes
<http://qtmoko.org/wiki/Update#Update_to_v31> or you might end-up with no
sound during calls.
As usual, instructions are located at <http://qtmoko.org/wiki/Update>.
Regards
Alexander Lehner wrote:
> What software are you using for recording voicenotes?
> I have SHR installed and did not find one single application (out of 5 or
> so) which worked. I would like to have this feature (maybe separate also
> on my second phone with Qt instead).
QtMoko has voice notes appl
Philip Rhoades wrote:
> Is there some way to increase the playback volume of recorded voice notes?
You can start recording and play with volumes from ssh in alsamixer. When you
are happy, you can save the state like:
alsactl -f /usr/share/openmoko/scenarios/capturehandset.state store
Regards
On Thu, 6 Jan 2011, Philip Rhoades wrote:
People,
Is there some way to increase the playback volume of recorded voice notes?
Sorry, no solution but another question:
What software are you using for recording voicenotes?
I have SHR installed and did not find one single application (out of 5
People,
Is there some way to increase the playback volume of recorded voice notes?
Thanks,
Phil.
--
Philip Rhoades
GPO Box 3411
Sydney NSW 2001
Australia
E-mail: p...@pricom.com.au
___
Openmoko community mailing list
community@lists.openmoko.o
Nashvin Gangaram wrote:
> Hi Radek
>
> Everything's working great in QtMoko v31... except for Eyepiece.
>
> I get an error:
> "Error: cannot load plugin"
> when trying to open PDF files. Is libdjvulibre21 required to view PDF
> files now?
Yup it's n
Hi Radek
Everything's working great in QtMoko v31... except for Eyepiece.
I get an error:
"Error: cannot load plugin"
when trying to open PDF files. Is libdjvulibre21 required to view PDF files
now?
Thanks
-Nashvin
___
Openmoko communi
you for your attention.
--
View this message in context:
http://openmoko-public-mailinglists.1958.n2.nabble.com/QtMoko-v31-tp5881425p5888394.html
Sent from the Openmoko Community mailing list archive at Nabble.com.
___
Openmoko community mailing list
communi
Marco wrote:
> Everything's working fine, except a few glitches when using
> programs under QX. In particular even if I select "Use virtual
> keyboard" in the setting, it still doesn't appear;
It has simple workaround. Go to the textbox (which reads "xterm") and switch
to docked keyboard there.
Hi Radek,
amazing work as always, this version is as faster as ever.
Everything's working fine, except a few glitches when using
programs under QX. In particular even if I select "Use virtual
keyboard" in the setting, it still doesn't appear; also,
even when selecting "use window manager" there's
Alfa21 wrote:
> you can now remove the folded arrows keys and make the others bigger (home,
> ins, del...)
Well it's just half of normal key, so you can make just one button 50% wider.
Maybe the folded are could have some good use - fn keys or something else.
Let's give it a few more days what
2010-12...@16:40 Radek Polak
> - better layout in docked keyboard
you can now remove the folded arrows keys and make the others bigger (home,
ins, del...)
bugs:
- I'm no longer able to connect to wifi and while I try I see console messages
over the framebuffer graphic screen
- gprs does not co
Hrabosh wrote:
> What about replacing these by F1-F10 keys?
Good idea. I took a quick and Fn keys are not in the table, so they should be
added there and to the layout (keyboardframe.cpp), but i dont feel now like
playing with it, so maybe later or patches welcome :)
Regards
Radek
__
Keep up the good work and very happy new year
Rgds
Rp
On 12/31/10, Hrabosh wrote:
>
> Well done !
>
> As to the keyboard: I really appreciate having arrow keys there (because
> of command history in Terminal).
>
> If you hit the very left key in the second row, another keys
> (end,home,arrows..
Well done !
As to the keyboard: I really appreciate having arrow keys there (because
of command history in Terminal).
If you hit the very left key in the second row, another keys
(end,home,arrows..) shows up - but the same keys ale already in the
default keyboard, so now they are present twic
Den 30-12-2010 16:40, Radek Polak skrev:
- updated Danish translation (Ole Carlsen)
Hi Radek
I don't have any comment on v31 in general as I haven't tried it very
long yet. I though have some comment on the Danish translation as it
looks like some of the files doesn't get build, primarily tho
Thanks to every one behind this!
Happy new year too!
Sylvain
2010/12/30 Radek Polak
> Hi,
> new stable qtmoko release v31 is now out. You can download images for SD
> card
> and NAND flash from sourceforge [1] and sources from github [2].
>
> QtMoko is distribution for Freerunner based on debia
Hi,
new stable qtmoko release v31 is now out. You can download images for SD card
and NAND flash from sourceforge [1] and sources from github [2].
QtMoko is distribution for Freerunner based on debian rootfs and qtopia phone
stack and GUI. For more info please see [3] and [4].
Changes since pre
46 matches
Mail list logo
