Turning on the GPRS connection on boot (QTMoko)

2011-11-17 Thread Glen Ogilvie
Hi, I am looking for a way to get the GPRS connection to start from the command line, or from boot in QTMoko. It works fine when I go to Internet settings and turn it on, but want to setup the open moko so it does this automatically. I am using this always connected to power, and want

Re: Turning on the GPRS connection on boot (QTMoko)

2011-11-17 Thread Matthias Apitz
El día Friday, November 18, 2011 a las 12:34:05AM +1300, Glen Ogilvie escribió: Hi, I am looking for a way to get the GPRS connection to start from the command line, or from boot in QTMoko. It works fine when I go to Internet settings and turn it on, but want to setup the open moko so

[debian, others?] Partial workaround for GPRS connection dropping

2010-01-01 Thread Neil Jerram
of this was not getting any response to a series of LCP Echo requests - controlled by the lcp-echo-interval and lcp-echo-failure options in /etc/ppp/options. I reasoned that there is no good reason for the GSM network to fail, and that I don't want my GPRS connection to drop if the GSM network is temporarily

no gprs connection

2008-09-10 Thread julien cubizolles
I followed the instructions from http://freeyourphone.de/portal_v1/viewtopic.php?f=21t=295 and http://wiki.openmoko.org/wiki/GPRS#Option_1:_With_GSM_multiplexing_and_with_a_GUI (using the Armstrong repository to get gsm0710muxd) but still can't get a gprs connection (gprs off according

Re: no gprs connection

2008-09-10 Thread julien cubizolles
gsm0710muxd) but still can't get a gprs connection (gprs off according to services and no ppp0 in ifconfig) From the error messages, I'm guessing I missed something really obvious. I just noticed that a little while after,I get Sep 10 15:22:45 om-gta02 local2.info chat[1869]: alarm Sep 10 15:22

manual GPRS connection - impossible due to missing /etc/init.d/gsmd?!

2008-09-10 Thread steffen . linux
Hi, yesterday evening I tried to get GPRS working...but...in the HowTo ( http://wiki.openmoko.org/wiki/GPRS#Option_3:_Without_GSM_multiplexing_and_without_a_GUI ) stands that you've to stop /etc/init.d/gsmd ...but in my /etc/init.d there is no gsmd?! I've used OM2008.8 Image, it's up-to-date

Re: manual GPRS connection - impossible due to missing /etc/init.d/gsmd?!

2008-09-10 Thread Johny Tenfinger
Can you search the web until asking on maillist? Or only search a archive.. gsmd is a part of 2007.2 stack and it isn't on 2008.8 image - if i am correct, ASU uses qpe for controlling GSM. You should use option with multiplexing. With or without GUI - it doesn't matter. dos On Wed, Sep 10, 2008

Re: manual GPRS connection - impossible due to missing /etc/init.d/gsmd?!

2008-09-10 Thread steffen . linux
Datum: Wed, 10 Sep 2008 17:12:14 +0200 Von: Johny Tenfinger [EMAIL PROTECTED] An: List for Openmoko community discussion community@lists.openmoko.org Betreff: Re: manual GPRS connection - impossible due to missing /etc/init.d/gsmd?! Can you search the web until asking

Re: manual GPRS connection - impossible due to missing /etc/init.d/gsmd?!

2008-09-10 Thread steffen . linux
: Johny Tenfinger [EMAIL PROTECTED] An: List for Openmoko community discussion community@lists.openmoko.org Betreff: Re: manual GPRS connection - impossible due to missing /etc/init.d/gsmd?! Can you search the web until asking on maillist? Or only search a archive.. gsmd is a part

Re: manual GPRS connection - impossible due to missing /etc/init.d/gsmd?!

2008-09-10 Thread steffen . linux
argh, please ignore that email, thanks. Original-Nachricht Datum: Wed, 10 Sep 2008 17:42:18 +0200 Von: [EMAIL PROTECTED] An: List for Openmoko community discussion community@lists.openmoko.org Betreff: Re: manual GPRS connection - impossible due to missing /etc/init.d