In The Name Of Allah
Hello
This is answer of stefan schimdt (dfu-utils developer) :
The number of shown partitions is hardcoded atm to DFU_NUM_ALTERNATES
which is set to 6. So you last partition does not get shown increment
it to seven in your board config and re-compile your u-boot and test
On Mon, Jan 23, 2012 at 08:07:15PM +0330, a dehqan wrote:
In The Name Of Allah
Hello
This is answer of stefan schimdt (dfu-utils developer) :
The number of shown partitions is hardcoded atm to DFU_NUM_ALTERNATES
which is set to 6. So you last partition does not get shown increment
it to
Hello.
On Sun, 2012-01-22 at 01:13, a dehqan wrote:
In The Name Of Allah
Hello
Thanks have tried:
In The Name Of Allah
Hello
Thanks have tried:
mtdparts=mtdparts=physmap-flash:-(nor);neo1973-nand:0x0004(u-boot),0x0004(u-boot_env),0x0080(kernel),0x000a(splash),0x0004(factory),0x0400(system),0x0b6a(userdata)
Now printenv shows:
El Thursday 19 January 2012 17:52:46 a dehqan va escriure:
Thanks methink so
Have installed uboot on NAND and have set enviroments on it , this is
mtdparts output http://pastebin.com/E08fHr2G and this is printenv output
http://pastebin.com/E08fHr2G
But dfu-util -l
the problem is that the bootloader of my fr is not compatible with fastboot
but with dfu instead, the problem is that not all partitions defined trough
u-boot are exported trough the dfu protocol, so the solution is to flash
from android itself the remaining partition
unfortunately the phone is
Dnia 2012-01-20, piÄ… o godzinie 16:41 +0330, a dehqan pisze:
[cut]
the problem is that not all partitions defined trough u-boot are
exported trough the dfu protocol,
[cut]
Tormod Volden and Stefan Schmidt are actively developing dfu-util, but I
am not sure if they are reading community ML. So it
+++ a dehqan [19/01/12 11:05 +0330]:
My question was about installing android on NAND without uSD and Now
Android comes up but becaue of lacking userdata partition can not download
.apk and so ...
could not create userdata partition because dfu error
android on a freerunner needs an
please if you know just answer question nothing more ,thanks
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Just read the instructions here
http://code.google.com/p/android-on-freerunner/wiki/GetIt, here pasted:
Partition and format the SD card
For Android to work properly the Micro SD Card in your FreeRunner needs to
have 2 primary partitions. The first needs to be a VFAT/MSDOS (16 or 32)
partition
Thanks a lot for your attentions,
but my question is not how to install android by using uSD
Again my need is only the answer of question in my first post ,maybe should
be repeated:
Am trying to install android without uSD on NAND
have flashed kernel,qi,system images into kernel,uboot,rootfs
The answer is: it seems not to be possible.
Try to ask also to the AoF community.
hth
d
On Thu, Jan 19, 2012 at 11:15 AM, a dehqan dehqa...@gmail.com wrote:
Thanks a lot for your attentions,
but my question is not how to install android by using uSD
Again my need is only the answer of
thanks AoF community.
do they have mailing list ?
On Thu, Jan 19, 2012 at 1:48 PM, Davide Scaini dsca...@gmail.com wrote:
The answer is: it seems not to be possible.
Try to ask also to the AoF community.
hth
d
On Thu, Jan 19, 2012 at 11:15 AM, a dehqan dehqa...@gmail.com wrote:
Thanks a
http://groups.google.com/group/android-on-freerunner
On Thu, 2012-01-19 at 13:53 +0330, a dehqan wrote:
thanks AoF community.
do they have mailing list ?
On Thu, Jan 19, 2012 at 1:48 PM, Davide Scaini dsca...@gmail.com
wrote:
The answer is: it seems not to be possible.
Try
El Thursday 19 January 2012 08:35:24 a dehqan va escriure:
My question was about installing android on NAND without uSD and Now
Android comes up but becaue of lacking userdata partition can not download
.apk and so ...
could not create userdata partition because dfu error
I think that the
Thanks methink so
Have installed uboot on NAND and have set enviroments on it , this is
mtdparts output http://pastebin.com/E08fHr2G and this is printenv output
http://pastebin.com/E08fHr2G
But dfu-util -l http://pastebin.com/59fLK4GC does not show any userdata
partition while it got system
On Thu, 19 Jan 2012 10:49:43 +0100
Davide Scaini dsca...@gmail.com wrote:
For Android to work properly the Micro SD Card in your FreeRunner needs to
have 2 primary partitions. The first needs to be a VFAT/MSDOS (16 or 32)
partition which is used is mounted as '/sdcard', this is used as a
On Thu, Jan 19, 2012 at 8:38 PM, dmatthews.org m...@dmatthews.org wrote:
On Thu, 19 Jan 2012 10:49:43 +0100
Davide Scaini dsca...@gmail.com wrote:
For Android to work properly the Micro SD Card in your FreeRunner needs
to
have 2 primary partitions. The first needs to be a VFAT/MSDOS
In The Name of Allah
Hello
the problem is that the bootloader of my fr is not compatible with fastboot
but with dfu instead, the problem is that not all partitions defined trough
u-boot are exported trough the dfu protocol, so the solution is to flash
from android itself the remaining partition
In The name Of Allah
hello
have set some enviroments in uboot that is on NAND:
setenv mtdparts
mtdparts=physmap-flash:-(nor)\;neo1973-nand:0x0004(u-boot),0x0004(u-boot_env),0x0080(kernel),0x000a(splash),0x0004(factory),0x0400(system),0x0b6a(userdata)
and this is
From what I know, Android on the FR requires QI. Unless you have a specific
reason not to use it, just go with that. Note that it has to be the QI from
the AoF people as it changes the partition layout.
On Wed, Jan 18, 2012 at 8:36 PM, a dehqan dehqa...@gmail.com wrote:
In The name Of Allah
My question was about installing android on NAND without uSD and Now
Android comes up but becaue of lacking userdata partition can not download
.apk and so ...
could not create userdata partition because dfu error
___
Openmoko community mailing list
22 matches
Mail list logo