Re: IGES STEP CAD file issues
Hi, On Thu, May 29, 2008 at 9:28 AM, Philip Stubbs [EMAIL PROTECTED] wrote: Pro/E Wildfire 3.0 and 2.0 were available as native Linux applications. If you could get a trial of one of those, I am sure you will have much more success. For people who are curious, here is a bit of info: http://en.wikipedia.org/wiki/ProEngineer I couldn't find a trial / demo version, though. -- Regards, Torfinn Ingolfsen ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: IGES STEP CAD file issues
2008/5/22 Jeremiah Flerchinger [EMAIL PROTECTED]: I'm trying to install a 30 day trial version of Pro/E Wildfire 4.0 right now. If I'm lucky I can run it in Wine and I can see if it can export models that work any better for me. Pro/E Wildfire 3.0 and 2.0 were available as native Linux applications. If you could get a trial of one of those, I am sure you will have much more success. -- Philip Stubbs ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
RE: IGES STEP CAD file issues
Well, I haven't had any luck getting Pro/Engineer Wildfire 4.0 to install on Linux with Wine. It fails at a different point every time with one of a dozen documented errors. They suggesting ordering installing off a CD to fix most of those issues. Guillermo, I actually started an email to you previously, but wanted to try my hand at getting Pro/E to run first. As it stands I can't find anything to load the Pro/E geometry. Would you be willing to translate the new Openmoko Neo FreeRunner Pro/E file http://downloads.openmoko.org/CAD/NeoFreerunner_ProE.zip to some alternate formats (IGES, STEP, etc)? Also good job on your Neo skin. It looks great most of those files load perfectly for me. If you could translate the new Pro/E file into STEP IGES, then I have good faith I could load them into a 3D modeler program. Thanks, Jeremiah On Sat, 2008-05-24 at 11:16 -0700, steve wrote: Guillermo may be bale to help. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of christooss Sent: Thursday, May 22, 2008 2:50 PM To: [EMAIL PROTECTED]; List for Openmoko community discussion Subject: Re: IGES STEP CAD file issues Jeremiah Flerchinger wrote: I was curious how many people have been playing with the Neo CAD files? After I found the FreeRunner would be different in case design from the 1973, I held off on using the files. Since no-one has posted conversions of the new Pro/E files I decided to go back look at the old IGES STEP files and plan modifications I'd like to make. Do the 1973 IGES and/or STEP files work well for anyone? VariCAD either crashes (STEP) or returns a failure to convert dialog (IGES). Salome loads the STEP model but has all kind of geometries that go in the wrong directions (inverted buttons going out of case instead of in, etc). gCAD does about the same as Salome. I'm trying to install a 30 day trial version of Pro/E Wildfire 4.0 right now. If I'm lucky I can run it in Wine and I can see if it can export models that work any better for me. Please wirte if it works. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
RE: IGES STEP CAD file issues
Guillermo may be bale to help. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of christooss Sent: Thursday, May 22, 2008 2:50 PM To: [EMAIL PROTECTED]; List for Openmoko community discussion Subject: Re: IGES STEP CAD file issues Jeremiah Flerchinger wrote: I was curious how many people have been playing with the Neo CAD files? After I found the FreeRunner would be different in case design from the 1973, I held off on using the files. Since no-one has posted conversions of the new Pro/E files I decided to go back look at the old IGES STEP files and plan modifications I'd like to make. Do the 1973 IGES and/or STEP files work well for anyone? VariCAD either crashes (STEP) or returns a failure to convert dialog (IGES). Salome loads the STEP model but has all kind of geometries that go in the wrong directions (inverted buttons going out of case instead of in, etc). gCAD does about the same as Salome. I'm trying to install a 30 day trial version of Pro/E Wildfire 4.0 right now. If I'm lucky I can run it in Wine and I can see if it can export models that work any better for me. Please wirte if it works. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- Please don't send me Word or PowerPoint attachments. See http://www.gnu.org/philosophy/no-word-attachments.html ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
IGES STEP CAD file issues
I was curious how many people have been playing with the Neo CAD files? After I found the FreeRunner would be different in case design from the 1973, I held off on using the files. Since no-one has posted conversions of the new Pro/E files I decided to go back look at the old IGES STEP files and plan modifications I'd like to make. Do the 1973 IGES and/or STEP files work well for anyone? VariCAD either crashes (STEP) or returns a failure to convert dialog (IGES). Salome loads the STEP model but has all kind of geometries that go in the wrong directions (inverted buttons going out of case instead of in, etc). gCAD does about the same as Salome. I'm trying to install a 30 day trial version of Pro/E Wildfire 4.0 right now. If I'm lucky I can run it in Wine and I can see if it can export models that work any better for me. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: IGES STEP CAD file issues
Jeremiah Flerchinger wrote: I was curious how many people have been playing with the Neo CAD files? After I found the FreeRunner would be different in case design from the 1973, I held off on using the files. Since no-one has posted conversions of the new Pro/E files I decided to go back look at the old IGES STEP files and plan modifications I'd like to make. Do the 1973 IGES and/or STEP files work well for anyone? VariCAD either crashes (STEP) or returns a failure to convert dialog (IGES). Salome loads the STEP model but has all kind of geometries that go in the wrong directions (inverted buttons going out of case instead of in, etc). gCAD does about the same as Salome. I'm trying to install a 30 day trial version of Pro/E Wildfire 4.0 right now. If I'm lucky I can run it in Wine and I can see if it can export models that work any better for me. Please wirte if it works. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- Please don't send me Word or PowerPoint attachments. See http://www.gnu.org/philosophy/no-word-attachments.html ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community