On Sun, Nov 27, 2011 at 11:13:56PM +0100, ø wrote:
I didn't see instructions for using ubi images.
I have instead tried uSD card installation. I installed qi bootloader,
and formated a Trascend 4GB SDHC card with ext3 format, and then
uncompressed full-om-gta02.tar.gz file on it.
But when I load from qi, the card seems to not work. I have used the
rootdelay=5 as Qi article says, but after 5 seconds it seems not to be
able to read the card, and the kernel panics.
I tried a lot of combinations, but I can't boot. This is what I get, I
expect there aren't errors as I have typed it by hand:
mmc1: new high speed SDHC card at address b368
mmcblk0: mmc1:b368 USD 3.74 GiB
mmcblk0: unknown partition table
Waiting 5sec before mounting root device...
VFS: Cannot open root device mmcblk0p1 or unknown-block(179,1)
Please append a correct root= boot option; here are the available
partitions:
1f002048 mtdblock0 (driver?)
1f01 256 mtdblock1 (driver?)
1f02 256 mtdblock2 (driver?)
1f038192 mtdblock3 (driver?)
1f04 640 mtdblock4 (driver?)
1f05 256 mtdblock5 (driver?)
1f06 252544 mtdblock6 (driver?)
b300 3939112 mmcblk0 driver: mmcblk
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown
block(179,1)
Is this with 2.6.39 and shr-core? and do you have msdos partition table
or gpt? But both are supported by 2.6.39 config and IIRC were also
enabled in 2.6.37.
On my append-GTA02 I have:
rootdelay=5 rootfstype=ext2 loglevel=8 quiet splash
qi built by SHR has already rootwait included in default params (instead
of rootdelay=1), what you have to do with some uSD cards is to slow down
glamo_mci clock.
ie glamo_mci.sd_max_clk=100
in append-GTA02, see last comment from GNUtoo
http://trac.shr-project.org/trac/ticket/1275
but the clock is different for different cards ie my card works fine
with default clock and with glamo_mci.sd_max_clk=100 doesn't work at
all.
GNUtoo is trying to upgrade gta kernel to resolve it..
Regards,
--
Martin 'JaMa' Jansa jabber: martin.ja...@gmail.com
signature.asc
Description: Digital signature
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
