Re: Om2009 testing release 5
El Wednesday, 24 de June de 2009 22:25:29 Xavier Cremaschi va escriure: I see none of my contacts... am I missing something obvious or is it a bug ? Th OP states that there is a chance to losse the contacts under known isues: Before install this release backup your contacts in ~/.paroli/ as there have been some reports of contacts being deleted. One bug relating to missing contacts has been fixed but there's a chance that there is another one. Also make sure your home directory is on a journaling filesystem ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
Th OP states that there is a chance to losse the contacts under known isues: Would be nice, if somebody could confirm, if loosing contact is still the case. And the exact step to reproduce it. There is only one minor issue, namely if the contacts are on the sim too. In that case, the sim contacts overwrites the paroli contacts, so you cant modify the contact permanently only until the next paroli restart or reboot. But Im waiting for a consensus, what should be the future of PIM, should we develop the current solution, or should we integrate opimd? It is not clear at all to me, so I dont spend time to fixes these bugs;) Laszlo ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
Hi is it me or is xrandr or xglamo a bit confused ? I do export DISPLAY=:0 xrandr -q 480x64050.0* 640x48025.0 240x32050.0 320x24050.0 but it doesnt actually seem to support all that on my neo. xrandr -o left that works (and selects the second option) xrandr -s 320x240 gives a weird screen with two vertical pages on a horizontal screen, with a slight offset, mosaic. starting from scratch, the xrandr -s 320x240 turns the screen all white/yellowish and unreadable. after switching a few times, x crashes. restarting xserver-nodm twice repairs it. what am i doing wrong ? curious, *-pike PS - I installed opendoom - it has the same problem, its trying to rotate the screen into 320x240, but the screen goes yellow most of the time.. which is why I was trying to look into this. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
On Wed, Jun 24, 2009 at 1:43 PM, pike pike-openm...@kw.nl wrote: PS - I installed opendoom - it has the same problem, its trying to rotate the screen into 320x240, but the screen goes yellow most of the time.. which is why I was trying to look into this. I noticed the same problem with duke3d, which is a shame, because showing off duke3d would make a lot of people very jealous :) ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
pike pike-openm...@kw.nl writes: after switching a few times, x crashes. restarting xserver-nodm twice repairs it. what am i doing wrong ? You are not reading the bug reports :-) A simple search for glamo at e.g. http://lindi.iki.fi/lindi/cgi-bin/openmoko-bugs.py?q=glamo finds #2263 xf86-video-glamo/703acea13: xrandr --output LCD --mode 240x320 incorrect screen position Also, you did not very clearly specify if you are using Xglamo or Xorg with xserver-xorg-video-glamo. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
On Wednesday 24 June 2009, Timo Juhani Lindfors wrote: pike pike-openm...@kw.nl writes: after switching a few times, x crashes. restarting xserver-nodm twice repairs it. what am i doing wrong ? You are not reading the bug reports :-) A simple search for glamo at e.g. http://lindi.iki.fi/lindi/cgi-bin/openmoko-bugs.py?q=glamo finds #2263 xf86-video-glamo/703acea13: xrandr --output LCD --mode 240x320 incorrect screen position Also, you did not very clearly specify if you are using Xglamo or Xorg with xserver-xorg-video-glamo. Om2009 is specified in the subject, and AFAIK this is still using Xglamo, so this bug doesn't seem to be relevant. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
Al Johnson openm...@mazikeen.demon.co.uk writes: Om2009 is specified in the subject, and AFAIK this is still using Xglamo, so this bug doesn't seem to be relevant. The Xorg driver was created from the Xglamo source. Also, the bug is in kernel so it should apply to both. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
Hi what am i doing wrong ? You are not reading the bug reports :-) you're so right. did now, and its tracced here. http://docs.openmoko.org/trac/ticket/2162 fwiw, this bug is in om2009 testing release5, cleanly flashed. and with some fiddling like # export DISPLAY=:0 # xrandr -s 320x240 -o left # echo qvga-normal /sys/bus/spi/devices/spi2.0/state # dm I did get it to work, temporarily. Also, you did not very clearly specify if you are using Xglamo or Xorg with xserver-xorg-video-glamo. because I wouldn't have a clue, sorry :-) thanks, *-pike ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
Michal Brzozowski wrote: Now I have Serenity again, the illume keyboard is turned off again (yay), the battery app shows the state wrong (!) Ive not tried with paroli, but when I compile e17 from svn and I upgrade the version I've in my Om2008 partition I've to go in Illume-settings - Advanced - Battery Meter - Advanced - Hardware - Internal. Then it counts correctly. I don't understand anything from this, why is Paroli duplicating the options from illume-settings? Well, imho having everything in a settings manager could be useful. And a more general question, is Paroli trying to be more than a phone app? Is it going to replace illume? According to the FAQ it isn't. By the way in my opinion Paroli should allow to be run in two ways: using its own launcher as an all-in-one/fullscreen application, and using illume as launcher; In fact the paroli apps can be also launched using a simple dbus call, but actually they seem to work only if the launcher is still opened (while launching them with the main Launcher in background causes Paroli to crash). However it would be important to keep the dialer/log/contacts/messages and other main paroli applications always in background to make them popping-up quckly. I think that this would be the best way to use the nice paroli telephony related applications with an illume-based distro. -- Treviño's World - Life and Linux http://www.3v1n0.net/ ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
On Wed, Jun 24, 2009 at 6:21 PM, Marco Trevisan (Treviño) m...@3v1n0.net wrote: Michal Brzozowski wrote: Now I have Serenity again, the illume keyboard is turned off again (yay), the battery app shows the state wrong (!) Ive not tried with paroli, but when I compile e17 from svn and I upgrade the version I've in my Om2008 partition I've to go in Illume-settings - Advanced - Battery Meter - Advanced - Hardware - Internal. Then it counts correctly. Yepp it works. Thanks. I don't understand anything from this, why is Paroli duplicating the options from illume-settings? Because when you use your phone do you care which engine it renders? For a simple (smart)phone you only want to set the basic (everyday) things. Thats why it is a dedicated settings app inside paroli. Keep it simple and stupid;) Laszlo ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
I see none of my contacts... am I missing something obvious or is it a bug ? Xavier. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
2009/6/19 Michal Brzozowski ruso...@poczta.fm I had the phone go into unresumable suspend. I received a call while it was suspended, it woke up and I answered the call. I don't remember if I put it down or the other side. Then the phone went to suspend again, and there was another call coming, I heard it in my radios speakers, but the phone didn't wake up. I didn't wake up with the power button as well. I restarted it and tried to get the logs (/var/log/..), but it seems frameworkd only keeps a small portion of them, as the logs from before the restart got overwritten. I tried to reproduce the same scenario by myself, but without success. Is there a way to make Paroli and frameworkd keep old logs and not deleting them? Michal It happened again. The phone suspended while I was talking, and wouldn't wake up after the call ended. Does not waking up from suspend necessarily mean it's a kernel bug? It only happened just after a call. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
Rui Miguel Silva Seabra wrote: I found the same issue than Michal, not a real problem, but it's hard to scroll without clicking. Could you specify on what views (or all?) is this? for the people view, it's ok, scrolling nicely without clicking, but in the settings menu, I put my finger on item A, then scroll up/down, when I release it, the item A is automatically clicked. Yes, it's very hard to navigate in the settings area. Maybe the list of items is not being created the same way? I'd suggest also to use the lateral scrolling (left/right) to (respectively) decrease and increase the values for options such the Suspend time and other cycling settings; actually changing them is really annoying! -- Treviño's World - Life and Linux http://www.3v1n0.net/ ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
Hi I'd suggest also to use the lateral scrolling (left/right) to (respectively) decrease and increase the values for options such the Suspend time and other cycling settings; That's an idea. I toyed with the idea of having such lists of settings (numerical/boolean) with buttons on each side: (-) hour:07 (+) (off) alarm (on) sort of an 'old school' lateral slider :-) $2c, *-pike ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
Hi Not sure when this started, but it might be since flashing to om2009 release5: I can't ssh into my Neo any more. Not over wifi, and not over usb. ~pike$ ping 192.168.0.200 [..] --- 192.168.0.200 ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss ~pike$ ssh r...@192.168.0.200 ssh: connect to host 192.168.0.200 port 22: Connection refused ~pike$ ping 192.168.1.31 [..] --- 192.168.1.31 ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss ~pike$ ssh r...@192.168.1.31 ssh: connect to host 192.168.1.31 port 22: Connection refused the connections are good. dropbear is running. a few other apparent bugs are disabling me to test it very thorough, but .. am I overseeing something ? curious, *-pike ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
2009/6/23 pike pike-openm...@kw.nl Hi Not sure when this started, but it might be since flashing to om2009 release5: I can't ssh into my Neo any more. Not over wifi, and not over usb. ~pike$ ping 192.168.0.200 [..] --- 192.168.0.200 ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss ~pike$ ssh r...@192.168.0.200 ssh: connect to host 192.168.0.200 port 22: Connection refused Try at 192.168.0.202 :-) ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
Hi ~pike$ ping 192.168.0.200 Try at 192.168.0.202 :-) eeeuuh... :-) ~ pike$ ssh r...@192.168.0.202 r...@192.168.0.202's password: r...@om-gta02:~# thanks! *-pike ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
El Friday, 19 de June de 2009 10:26:28 Risto H. Kurppa va escriure: On Fri, Jun 19, 2009 at 10:22 AM, Jose Luis Perez Diezperezd...@gmail.com wrote: El Thursday, 18 de June de 2009 22:52:30 Steven Le Roux va escriure: Another feedback : After a while, receiving a call make paroli buging , the phone is vibrating endless. (infinite loop ?) I can't stop it, and have to put the battery off. It happens after a suspend. with any contact. It's just that I can say for the moment... sorry keeping the search... I did this same test this morning with the same results but I keept it vibrating until I arrived at work to copy /var/log/* and the output of logread to a pc. I stoped the buzz calling reboot from ssh ;( I will try to reproduce it with a plain testing release 5. Please post the logs to http://www.paroli-project.org/trac/ with the bug rep!! I think from reading the logs that this isue is the same than the one on http://www.paroli-project.org/trac/ticket/192 In my case the culprit was speech-dispatcher (from navit). ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
El Thursday, 18 de June de 2009 22:52:30 Steven Le Roux va escriure: Another feedback : After a while, receiving a call make paroli buging , the phone is vibrating endless. (infinite loop ?) I can't stop it, and have to put the battery off. It happens after a suspend. with any contact. It's just that I can say for the moment... sorry keeping the search... I did this same test this morning with the same results but I keept it vibrating until I arrived at work to copy /var/log/* and the output of logread to a pc. I stoped the buzz calling reboot from ssh ;( I will try to reproduce it with a plain testing release 5. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
On Fri, Jun 19, 2009 at 10:22 AM, Jose Luis Perez Diezperezd...@gmail.com wrote: El Thursday, 18 de June de 2009 22:52:30 Steven Le Roux va escriure: Another feedback : After a while, receiving a call make paroli buging , the phone is vibrating endless. (infinite loop ?) I can't stop it, and have to put the battery off. It happens after a suspend. with any contact. It's just that I can say for the moment... sorry keeping the search... I did this same test this morning with the same results but I keept it vibrating until I arrived at work to copy /var/log/* and the output of logread to a pc. I stoped the buzz calling reboot from ssh ;( I will try to reproduce it with a plain testing release 5. Please post the logs to http://www.paroli-project.org/trac/ with the bug rep!! r -- | risto h. kurppa | risto at kurppa dot fi | http://risto.kurppa.fi ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
On Fri, Jun 19, 2009 at 9:22 AM, Jose Luis Perez Diez perezd...@gmail.comwrote: El Thursday, 18 de June de 2009 22:52:30 Steven Le Roux va escriure: Another feedback : After a while, receiving a call make paroli buging , the phone is vibrating endless. (infinite loop ?) I can't stop it, and have to put the battery off. It happens after a suspend. with any contact. It's just that I can say for the moment... sorry keeping the search... I did this same test this morning with the same results but I keept it vibrating until I arrived at work to copy /var/log/* and the output of logread to a pc. I stoped the buzz calling reboot from ssh ;( If you have ssh access you can stop it with : echo none /sys/class/leds/neo1973:vibrator/trigger I will try to reproduce it with a plain testing release 5. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- Steven Le Roux Jabber-ID : ste...@jabber.fr 0x39494CCB ste...@le-roux.info 2FF7 226B 552E 4709 03F0 6281 72D7 A010 3949 4CCB ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
2009/6/19 Jose Luis Perez Diez perezd...@gmail.com El Thursday, 18 de June de 2009 22:52:30 Steven Le Roux va escriure: Another feedback : After a while, receiving a call make paroli buging , the phone is vibrating endless. (infinite loop ?) I can't stop it, and have to put the battery off. It happens after a suspend. with any contact. It's just that I can say for the moment... sorry keeping the search... I did this same test this morning with the same results but I keept it vibrating until I arrived at work to copy /var/log/* and the output of logread to a pc. I stoped the buzz calling reboot from ssh ;( I will try to reproduce it with a plain testing release 5. I had the phone go into unresumable suspend. I received a call while it was suspended, it woke up and I answered the call. I don't remember if I put it down or the other side. Then the phone went to suspend again, and there was another call coming, I heard it in my radios speakers, but the phone didn't wake up. I didn't wake up with the power button as well. I restarted it and tried to get the logs (/var/log/..), but it seems frameworkd only keeps a small portion of them, as the logs from before the restart got overwritten. I tried to reproduce the same scenario by myself, but without success. Is there a way to make Paroli and frameworkd keep old logs and not deleting them? Michal ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
2009/6/20 Michal Brzozowski ruso...@poczta.fm: Is there a way to make Paroli and frameworkd keep old logs and not deleting them? easy - create a script which runs at shutdown, to copy the log file(s) in question to an archive location. maybe in one of the change-runlevel folders? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
2009/6/19 Robin Paulson robin.paul...@gmail.com 2009/6/20 Michal Brzozowski ruso...@poczta.fm: Is there a way to make Paroli and frameworkd keep old logs and not deleting them? easy - create a script which runs at shutdown, to copy the log file(s) in question to an archive location. maybe in one of the change-runlevel folders? That doesn't help in a situation where you turn off the phone by taking out the battery. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
On Fri, Jun 19, 2009 at 3:54 PM, Michal Brzozowskiruso...@poczta.fm wrote: 2009/6/19 Robin Paulson robin.paul...@gmail.com 2009/6/20 Michal Brzozowski ruso...@poczta.fm: Is there a way to make Paroli and frameworkd keep old logs and not deleting them? easy - create a script which runs at shutdown, to copy the log file(s) in question to an archive location. maybe in one of the change-runlevel folders? That doesn't help in a situation where you turn off the phone by taking out the battery. Unless you launch the script at *startup* :) Nicola ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
Am Freitag, 19. Juni 2009 16:21:26 schrieb Nicola Mfb: On Fri, Jun 19, 2009 at 3:54 PM, Michal Brzozowskiruso...@poczta.fm wrote: 2009/6/19 Robin Paulson robin.paul...@gmail.com 2009/6/20 Michal Brzozowski ruso...@poczta.fm: Is there a way to make Paroli and frameworkd keep old logs and not deleting them? easy - create a script which runs at shutdown, to copy the log file(s) in question to an archive location. maybe in one of the change-runlevel folders? That doesn't help in a situation where you turn off the phone by taking out the battery. Unless you launch the script at *startup* :) And this startup script could replace the actual logfile with a symlink to a location on the sd card or similar. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
On June 19, 2009 07:27:49 am Michal Brzozowski wrote: Is there a way to make Paroli and frameworkd keep old logs and not deleting them? Michal Check here under log directory http://wiki.openmoko.org/wiki/Om_2009#Using_OM2009 Angus ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
Another feedback : After a while, receiving a call make paroli buging , the phone is vibrating endless. (infinite loop ?) I can't stop it, and have to put the battery off. It happens after a suspend. with any contact. It's just that I can say for the moment... sorry keeping the search... -- Steven Le Roux Jabber-ID : ste...@jabber.fr 0x39494CCB ste...@le-roux.info 2FF7 226B 552E 4709 03F0 6281 72D7 A010 3949 4CCB ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
I've seen one bit of weirdness since I got TR5 working this morning (with tonnes of help from nytowl). My FR suddenly woke up from sleep without any apparent reason - I didn't have any new sms's or calls. after that, it wouldn't go back to sleep, and when I tried to go into the Paroli Settings, it seemed like Paroli hung on me - the screen stopped updating. I ended up having to reboot. If it happens again, I'll see if I can get logs, etc. Warren On Tue, Jun 16, 2009 at 1:24 PM, Angus Ainslie nyt...@openmoko.org wrote: Hi All, There have been some major show stoppers fixed in the last week. As usual there are additional instructions here. http://wiki.openmoko.org/wiki/Om2009 There is also a new page for community involvement. Many of these wishlist items need someone to implement them. If you are interested in in owning one of the wishlist items come and join #paroli or send me an email http://wiki.openmoko.org/wiki/Om_2009_get_active Careful attention was paid to package versioning so opkg update opkg upgrade *might* work. You must also do rm -r /home/root/.e. If you want to preserve your settings with flashing the full image use the bind-home method. New features Settings available from the main screen Improved call handling - should limit races in oeventsd Better list handling More consistent interface New paroli-serenity theme, This is for the most part a copy of Joel Newkirk's serenity theme Static MAC addresses for usb devices Ability to cut 30 seconds off boot time - DO NOT use this if you use bind-home - install udev-static-devices to get this speed boost Keyboard goes away after use Updated /etc/network/interfaces to give usb0 a metric Known issues If you use bind-home make sure it is on a journaling filesystem such as ext 3 Before install this release backup your contacts in ~/.paroli/ as there have been some reports of contacts being deleted. One bug relating to missing contacts has been fixed but there's a chance that there is another one. Also make sure your home directory is on a journaling filesystem Some oeventsd rules are ignored ( framework oeventsd problems ) - don't suspend while plugged in http://trac.freesmartphone.org/ticket/381 - work around unplug usb until LED goes out, then plug usb in ( need to keep the device awake by touching the screen until the LED comes back on) connman doesn't give a default route to wifi if usb0 already is the default route -work around either ifdown usb0 from a terminal or route del default gw 192.168.0.202 Bugs fixed after editing contacts - some contacts erased no suspend after phone call FSO 435 Parts of frameworkd stop working FSO 416 improper battery level in illume Keyboard collapses after use Angus ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- Warren Baird - Photographer and Digital Artist http://www.synergisticimages.ca ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
On Wed, Jun 17, 2009 at 1:44 AM, Warren Bairdwjba...@alumni.uwaterloo.ca wrote: Woot - I'm trying the opkg update ; opkg upgrade approach now. I look forward to the improvements a lot. Nice, nice! Did you remember to remove ~/.e -directory? One question - is the 'bind-home' approach documented somewhere? Both google and searching on the wiki haven't helped me find info on how to set this up. I've actually got om2009 on my sd-card right now, so it isn't something I need right away - but I think I'm getting confident enough in OM2009 that I'll soon ditch the QtE install I've been keeping for 'emergencies' on the built-in flash. documented here: http://wiki.openmoko.org/wiki/Om2009#Installing If using on flash I have no idea how it works.. Enjoy your freedom and feel free to join #paroli to discuss more! r -- | risto h. kurppa | risto at kurppa dot fi | http://risto.kurppa.fi ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
Hi all , Just flash to help testing :) I really love paroli ! Better each release appearing :) Awesome! I found the same issue than Michal, not a real problem, but it's hard to scroll without clicking. Could you specify on what views (or all?) is this? BTW, with testing release 4 you could return into illume by changing the profile, but now I change profile to illume without any effect... is it still possible ? How to access to apps ? INteresting.. It should be no problem to change to illume or paroli-serenity theme.. I have no idea what's this about.. r -- | risto h. kurppa | risto at kurppa dot fi | http://risto.kurppa.fi ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
On Wed, Jun 17, 2009 at 7:28 AM, Warren Bairdwjba...@alumni.uwaterloo.ca wrote: but I'm not sure if that's related to the problem I'm seeing. Paroli itself seems pretty good. However, when I enable the paroli-illume theme, illume doesn't start up. So for the moment I can't get at any of the other apps on the phone without sshing in. That's weird.. I hope we'll be able to figure this out soon.. I like the fact that you can see where the buttons are now... However, I'm afraid that I don't particularly like showing the buttons with the four dots at the corners - I think it's kind of an odd way to display them. The dots will be removed, they're there to help the design a bit.. I'd still like to see a visual indication of 'slidyness' - when things can be slide to the side. I agree but I don't think it'll happen.. I'll have to do more testing before I can comment on the reliability. Great, looking forward! Enjoy your freedom and feel free to join #paroli to discuss more! r -- | risto h. kurppa | risto at kurppa dot fi | http://risto.kurppa.fi ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
2009/6/17 Risto H. Kurppa ri...@kurppa.fi On Wed, Jun 17, 2009 at 12:25 AM, Michal Brzozowskiruso...@poczta.fm wrote: I found two problems so far. 1. When waking up from suspend while in horizontal mode, there is garbage on the screen and it's unusable. Can you take a photo to show it? Sure, http://pvtrace.com/P6170618.JPG It's a photo of an incoming call waking up the phone in landscape mode. 2. It's impossible to scroll in paroli, it's too sensitive and you always end up pressing a button What screen? Settings might still have some issues but the other should have it working pretty well.. All screens in settings. Other screens in Paroli seem ok (tested phone log so far only) 3. Paroli doesn't support horizontal mode too well. That's be the third problem, you only promised two :) But yes, it's true that when it's been designed, the horizontal mode has not been kept in mind (actually I think ~no one has tested it before you..). So possibly some work will be done there in the future.. Other than that it's pretty stable, good job! I agree :) Just a few more issues :-) 4. I don't see a way to reject an incoming call. 5. The battery meter in illume is broken, it shows 33% when the battery is full, now it's showing 28%, while it should be showing 88%. 6. The phone sometimes goes to sleep while connected via USB, happened to me twice so far, but can't reproduce. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
On Wed, Jun 17, 2009 at 9:48 AM, Michal Brzozowskiruso...@poczta.fm wrote: Sure, http://pvtrace.com/P6170618.JPG It's a photo of an incoming call waking up the phone in landscape mode. looks bad! Please report to http://www.paroli-project.org/trac 2. It's impossible to scroll in paroli, it's too sensitive and you always end up pressing a button What screen? Settings might still have some issues but the other should have it working pretty well.. All screens in settings. Other screens in Paroli seem ok (tested phone log so far only) right, could you report this too to http://www.paroli-project.org/trac Just a few more issues :-) 4. I don't see a way to reject an incoming call. could you report this too to http://www.paroli-project.org/trac 5. The battery meter in illume is broken, it shows 33% when the battery is full, now it's showing 28%, while it should be showing 88%. Did you delete /home/root/.e -dir - this should have been fixed already.. 6. The phone sometimes goes to sleep while connected via USB, happened to me twice so far, but can't reproduce. Yes, it's a bug and there's a workaround: - work around unplug usb until LED goes out, then plug usb in ( need to keep the device awake by touching the screen until the LED comes back on) r -- | risto h. kurppa | risto at kurppa dot fi | http://risto.kurppa.fi ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
On Wed, Jun 17, 2009 at 08:48:48AM +0200, Michal Brzozowski wrote: 2009/6/17 Risto H. Kurppa ri...@kurppa.fi On Wed, Jun 17, 2009 at 12:25 AM, Michal Brzozowskiruso...@poczta.fm wrote: I found two problems so far. 1. When waking up from suspend while in horizontal mode, there is garbage on the screen and it's unusable. Can you take a photo to show it? Sure, http://pvtrace.com/P6170618.JPG It's a photo of an incoming call waking up the phone in landscape mode. Yeah, sometimes it happens to me. I don't know if I'm missing anything in omnewrotate that should be added in order to never let that happen, or if it is a driver bug with xrandr :( usually putting in portrait then landscape mode again (sometimes it even requires a few retries) shows it correctly. But all I do is xrandr calls... -- ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
2009/6/17 Risto H. Kurppa ri...@kurppa.fi On Wed, Jun 17, 2009 at 9:48 AM, Michal Brzozowskiruso...@poczta.fm wrote: Sure, http://pvtrace.com/P6170618.JPG It's a photo of an incoming call waking up the phone in landscape mode. looks bad! Please report to http://www.paroli-project.org/trac Are you sure I should report it to Paroli? It's probably a driver problem. 2. It's impossible to scroll in paroli, it's too sensitive and you always end up pressing a button What screen? Settings might still have some issues but the other should have it working pretty well.. All screens in settings. Other screens in Paroli seem ok (tested phone log so far only) right, could you report this too to http://www.paroli-project.org/trac done 4. I don't see a way to reject an incoming call. could you report this too to http://www.paroli-project.org/trac done 5. The battery meter in illume is broken, it shows 33% when the battery is full, now it's showing 28%, while it should be showing 88%. Did you delete /home/root/.e -dir - this should have been fixed already.. This was a fresh install, so shouldn't have to delete anything. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
Hi! Its nice to read all this positive comments so far! Almost all question was answered by Risto. I just want to give a small summary. # Landscape vs. portrai mode It is not a high priority (for me at least) for now. Simply because until now, I couldnt rotate the screen of my phone, and couldnt test it. We are concentrating to bugfix only, and after the stable release is out, we will focus cleaning up all the gui code, and fix most of the placing issue. For example there is a slight offset between fullscreen and windowed mode, we cant just hide the topbar, etc, etc. And when rotating, all this placing issues just show up all at once. So its rather a big job, as I see. # Battery showing 33% when full. Its a problem what shr is suffering too. The main issue, that three battery are reported, and the batt app, averaging them. It should be fixed already, but nytowl can give you the exact details. # Scrolling Most of the apps, are designed against the accidental clicks when scrolling. Like for example the call-log app, when you click it will slide left for you, instead calling the contact directly. However, the settings app differ from the other apps, and it register an additional click each time you finish scrolling. I looked into this issue, and its hard to solve, as I need to understand the py code, because it differs from other list too much. Dont know if Im able to solve it by myself in a reasonable time. Every other apps should be fine. (call-log, people, sms, dialer) 4. I don't see a way to reject an incoming call. You can only mute them. Yepp, its missing. But before, if you didnt accepted the call, fso silently failed, so it was encouraged, that everybody should pick up the phone ;-P I agree, it needs to be fixed. But you can use the mute for now. # General remark Guys, did you restart your phones at least twice after reflashing? Laszlo ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
Oh, and there is a rather nasty bug: Sometime the phonebook gets erased, or some of the contacts. It is supposed to be fixed in this release, can somebody alert us, if he loose some of his contacts? And exact steps to reproduce it, would be highly appreciated. Thanks, Laszlo ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
Laszlo KREKACS laszlo.krekacs.l...@gmail.com writes: # Battery showing 33% when full. Its a problem what shr is suffering too. The main issue, that three battery are reported, and the batt app, averaging them. It's a problem of both hal and the way E gadget calculates the percentages. HAL reports three batteries, only one of which is real power_supply device, other being APM emulated battery and the third is external usb supply. It's believed that hal is wrong and shouldn't report those extra batteries. OTOH if E gadget didn't average percentages and took capacities into account those extra devices wouldn't affect readings because both usb and apm lack maximum capacity attribute and therefore should be ignored, IMHO. -- Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! mailto:fercer...@gmail.com ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
On Wed, Jun 17, 2009 at 10:58 AM, Michal Brzozowskiruso...@poczta.fm wrote: 2009/6/17 Risto H. Kurppa ri...@kurppa.fi On Wed, Jun 17, 2009 at 9:48 AM, Michal Brzozowskiruso...@poczta.fm wrote: Sure, http://pvtrace.com/P6170618.JPG It's a photo of an incoming call waking up the phone in landscape mode. looks bad! Please report to http://www.paroli-project.org/trac Are you sure I should report it to Paroli? It's probably a driver problem. You're right! Some hours after writing this (in the bus :) I realised that no, it has nothing to do with Paroli but Openmoko, the distribution. So this is the correct trac: http://docs.openmoko.org/trac (but I think it's already in somewhere there as there've been earlier some problems too with xrandr..) 5. The battery meter in illume is broken, it shows 33% when the battery is full, now it's showing 28%, while it should be showing 88%. Did you delete /home/root/.e -dir - this should have been fixed already.. This was a fresh install, so shouldn't have to delete anything. Ok, you're right, fresh install should have this working out of the box. I think this was fixed already a while ago but it seems to be back again.. r -- | risto h. kurppa | risto at kurppa dot fi | http://risto.kurppa.fi ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
On Wed, Jun 17, 2009 at 8:12 AM, Risto H. Kurppa ri...@kurppa.fi wrote: Hi all , Just flash to help testing :) I really love paroli ! Better each release appearing :) Awesome! I found the same issue than Michal, not a real problem, but it's hard to scroll without clicking. Could you specify on what views (or all?) is this? for the people view, it's ok, scrolling nicely without clicking, but in the settings menu, I put my finger on item A, then scroll up/down, when I release it, the item A is automatically clicked. BTW, with testing release 4 you could return into illume by changing the profile, but now I change profile to illume without any effect... is it still possible ? How to access to apps ? INteresting.. It should be no problem to change to illume or paroli-serenity theme.. I have no idea what's this about.. Accually it was a first shot problem, after reboot, no pb selecting paroli-serenity (which look great to me !) Maybe a button to put paroli in fullscreen mode would be more useful than changing the profile ? r -- | risto h. kurppa | risto at kurppa dot fi | http://risto.kurppa.fi ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- Steven Le Roux Jabber-ID : ste...@jabber.fr 0x39494CCB ste...@le-roux.info 2FF7 226B 552E 4709 03F0 6281 72D7 A010 3949 4CCB ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
Hi Woot - I'm trying the opkg update ; opkg upgrade approach now. I look forward to the improvements a lot. In case there's anybody as stupid as me out there, don't try that from within the Illume vala-terminal :-) Did you remember to remove ~/.e -directory? cu *-pike ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
On Wed, Jun 17, 2009 at 01:52:20PM +0200, Steven Le Roux wrote: On Wed, Jun 17, 2009 at 8:12 AM, Risto H. Kurppa ri...@kurppa.fi wrote: Hi all , Just flash to help testing :) I really love paroli ! Better each release appearing :) Awesome! Yes, indeed. But it is still very slow in some aspects, however I prefer they work on functionality and stability at the moment :) I found the same issue than Michal, not a real problem, but it's hard to scroll without clicking. Could you specify on what views (or all?) is this? for the people view, it's ok, scrolling nicely without clicking, but in the settings menu, I put my finger on item A, then scroll up/down, when I release it, the item A is automatically clicked. Yes, it's very hard to navigate in the settings area. Maybe the list of items is not being created the same way? BTW, with testing release 4 you could return into illume by changing the profile, but now I change profile to illume without any effect... is it still possible ? How to access to apps ? INteresting.. It should be no problem to change to illume or paroli-serenity theme.. I have no idea what's this about.. Accually it was a first shot problem, after reboot, no pb selecting paroli-serenity (which look great to me !) Maybe a button to put paroli in fullscreen mode would be more useful than changing the profile ? I agree, it should be click full screen / click non-full screen. Now that the settings have abandoned the AUX button, maybe paroli could capture it for that? Rui -- ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
I prefer the aux for other isues like keyboard in out and long press for something else(not sure of what righ now) 2009/6/17 Rui Miguel Silva Seabra r...@1407.org: On Wed, Jun 17, 2009 at 01:52:20PM +0200, Steven Le Roux wrote: On Wed, Jun 17, 2009 at 8:12 AM, Risto H. Kurppa ri...@kurppa.fi wrote: Hi all , Just flash to help testing :) I really love paroli ! Better each release appearing :) Awesome! Yes, indeed. But it is still very slow in some aspects, however I prefer they work on functionality and stability at the moment :) I found the same issue than Michal, not a real problem, but it's hard to scroll without clicking. Could you specify on what views (or all?) is this? for the people view, it's ok, scrolling nicely without clicking, but in the settings menu, I put my finger on item A, then scroll up/down, when I release it, the item A is automatically clicked. Yes, it's very hard to navigate in the settings area. Maybe the list of items is not being created the same way? BTW, with testing release 4 you could return into illume by changing the profile, but now I change profile to illume without any effect... is it still possible ? How to access to apps ? INteresting.. It should be no problem to change to illume or paroli-serenity theme.. I have no idea what's this about.. Accually it was a first shot problem, after reboot, no pb selecting paroli-serenity (which look great to me !) Maybe a button to put paroli in fullscreen mode would be more useful than changing the profile ? I agree, it should be click full screen / click non-full screen. Now that the settings have abandoned the AUX button, maybe paroli could capture it for that? Rui -- ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- David Reyes Samblas Martinez http://www.tuxbrain.com Open ultraportable embedded solutions Openmoko, Openpandora, Arduino Hey, watch out!!! There's a linux in your pocket!!! ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
But you don't need the keyboard in the main paroli window :) Being only two buttons, they shouldn't ever be hardwired to specific functions, but instead have different actions according to the foreground application. Rui On Wed, Jun 17, 2009 at 03:15:41PM +0200, David Reyes Samblas Martinez wrote: I prefer the aux for other isues like keyboard in out and long press for something else(not sure of what righ now) 2009/6/17 Rui Miguel Silva Seabra r...@1407.org: On Wed, Jun 17, 2009 at 01:52:20PM +0200, Steven Le Roux wrote: On Wed, Jun 17, 2009 at 8:12 AM, Risto H. Kurppa ri...@kurppa.fi wrote: Accually it was a first shot problem, after reboot, no pb selecting paroli-serenity (which look great to me !) Maybe a button to put paroli in fullscreen mode would be more useful than changing the profile ? I agree, it should be click full screen / click non-full screen. Now that the settings have abandoned the AUX button, maybe paroli could capture it for that? -- ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
2009/6/17 Risto H. Kurppa ri...@kurppa.fi On Wed, Jun 17, 2009 at 10:58 AM, Michal Brzozowskiruso...@poczta.fm wrote: 5. The battery meter in illume is broken, it shows 33% when the battery is full, now it's showing 28%, while it should be showing 88%. Did you delete /home/root/.e -dir - this should have been fixed already.. This was a fresh install, so shouldn't have to delete anything. Ok, you're right, fresh install should have this working out of the box. I think this was fixed already a while ago but it seems to be back again.. Ok, while we're at it. I just went to Paroli settings - display and set the profile to illume-serenity. It looked very nice, black and everything, and the battery applet was showing the state correctly (!). But the illume keyboard was back again, and I couldn't turn it off as the illume-settings button was now gone. So I switched back to illume profile. I then went to illume-settings, switched the theme to Serenity. Now I have Serenity again, the illume keyboard is turned off again (yay), the battery app shows the state wrong (!), and Paroli settings say that the theme is still Illume. I don't understand anything from this, why is Paroli duplicating the options from illume-settings? And a more general question, is Paroli trying to be more than a phone app? Is it going to replace illume? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
I flashed Om2009 r5 as well an can confirm most of the described problems. In addition I have the problem that switching of suspend from paroli (i assume this is done by setting suspend time to -1), as well as in illume does not have any effect. The same when i set up no dimming in the illume power settings. I dont remember exactly if this was working in r4 but I think it was. Besides that you have done a great work so far! Thanks guys! -- View this message in context: http://n2.nabble.com/Om2009-testing-release-5-tp3087682p3094095.html Sent from the Openmoko Community mailing list archive at Nabble.com. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
On June 16, 2009 04:44:22 pm Warren Baird wrote: Woot - I'm trying the opkg update ; opkg upgrade approach now. I look forward to the improvements a lot. One question - is the 'bind-home' approach documented somewhere? Both google and searching on the wiki haven't helped me find info on how to set this up. I've actually got om2009 on my sd-card right now, so it isn't something I need right away - but I think I'm getting confident enough in OM2009 that I'll soon ditch the QtE install I've been keeping for 'emergencies' on the built-in flash. Warren To get bind-home to work Make sure there isn't a bind-home directory first ls /media/card/bind-hone If this exists you are already using bind-home, otherwise keep following the directions below mv /home/root /media/card/bind-home mkdir /home/root reboot Angus ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
The same for me: flashed the current images yesterday in the evening. kernel, rootfs and qi. main problems: - I could not switch off auto-suspend. - after pressing the power-button to resume all I get is a wsod :( So the phone was just usable one minute after a too long boot-period and then a brick. A question: How reliable is wifi-networking and gprs? any experiences? Carry on that way, it's always good to see, something is developing around here! :) Matthias MicVM schrieb: I flashed Om2009 r5 as well an can confirm most of the described problems. In addition I have the problem that switching of suspend from paroli (i assume this is done by setting suspend time to -1), as well as in illume does not have any effect. The same when i set up no dimming in the illume power settings. I dont remember exactly if this was working in r4 but I think it was. Besides that you have done a great work so far! Thanks guys! ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
on., 17.06.2009 kl. 10.09 -0700, skrev MicVM: In addition I have the problem that switching of suspend from paroli (i assume this is done by setting suspend time to -1), as well as in illume does not have any effect. The same when i set up no dimming in the illume power settings. I dont remember exactly if this was working in r4 but I think it was. I've filed a ticket about the suspend-time bug at http://docs.openmoko.org/trac/ticket/2296 It was working on testing release 4. As a workaround I've commented out the following in /etc/freesmartphone/oevents/rules.yaml: # - # trigger: IdleState() # filters: HasAttr(status, suspend) # actions: Suspend() signature.asc Description: Dette er en digitalt signert meldingsdel ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
On Wed, Jun 17, 2009 at 10:08 PM, matthiasmatthiasfels...@web.de wrote: The same for me: flashed the current images yesterday in the evening. kernel, rootfs and qi. main problems: - I could not switch off auto-suspend. - after pressing the power-button to resume all I get is a wsod :( So the phone was just usable one minute after a too long boot-period and then a brick. Sounds bad :( Did you RESTART the phone after flashing and first boot? A question: How reliable is wifi-networking and gprs? any experiences? Both seem to work nice. r -- | risto h. kurppa | risto at kurppa dot fi | http://risto.kurppa.fi ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
2009/6/17 Rui Miguel Silva Seabra r...@1407.org But you don't need the keyboard in the main paroli window :) Being only two buttons, they shouldn't ever be hardwired to specific functions, but instead have different actions according to the foreground application. Rui +1 I like the idea of context use of AUX, now just need to define thats contexts :) On Wed, Jun 17, 2009 at 03:15:41PM +0200, David Reyes Samblas Martinez wrote: I prefer the aux for other isues like keyboard in out and long press for something else(not sure of what righ now) 2009/6/17 Rui Miguel Silva Seabra r...@1407.org: On Wed, Jun 17, 2009 at 01:52:20PM +0200, Steven Le Roux wrote: On Wed, Jun 17, 2009 at 8:12 AM, Risto H. Kurppa ri...@kurppa.fi wrote: Accually it was a first shot problem, after reboot, no pb selecting paroli-serenity (which look great to me !) Maybe a button to put paroli in fullscreen mode would be more useful than changing the profile ? I agree, it should be click full screen / click non-full screen. Now that the settings have abandoned the AUX button, maybe paroli could capture it for that? -- ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- David Reyes Samblas Martinez http://www.tuxbrain.com Open ultraportable embedded solutions Openmoko, Openpandora, Arduino Hey, watch out!!! There's a linux in your pocket!!! ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
2009/6/16 Angus Ainslie nyt...@openmoko.org Hi All, There have been some major show stoppers fixed in the last week. As usual there are additional instructions here. http://wiki.openmoko.org/wiki/Om2009 I found two problems so far. 1. When waking up from suspend while in horizontal mode, there is garbage on the screen and it's unusable. 2. It's impossible to scroll in paroli, it's too sensitive and you always end up pressing a button 3. Paroli doesn't support horizontal mode too well. Other than that it's pretty stable, good job! Michal ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
Woot - I'm trying the opkg update ; opkg upgrade approach now. I look forward to the improvements a lot. One question - is the 'bind-home' approach documented somewhere? Both google and searching on the wiki haven't helped me find info on how to set this up. I've actually got om2009 on my sd-card right now, so it isn't something I need right away - but I think I'm getting confident enough in OM2009 that I'll soon ditch the QtE install I've been keeping for 'emergencies' on the built-in flash. Warren On Tue, Jun 16, 2009 at 1:24 PM, Angus Ainslie nyt...@openmoko.org wrote: Hi All, There have been some major show stoppers fixed in the last week. As usual there are additional instructions here. http://wiki.openmoko.org/wiki/Om2009 There is also a new page for community involvement. Many of these wishlist items need someone to implement them. If you are interested in in owning one of the wishlist items come and join #paroli or send me an email http://wiki.openmoko.org/wiki/Om_2009_get_active Careful attention was paid to package versioning so opkg update opkg upgrade *might* work. You must also do rm -r /home/root/.e. If you want to preserve your settings with flashing the full image use the bind-home method. New features Settings available from the main screen Improved call handling - should limit races in oeventsd Better list handling More consistent interface New paroli-serenity theme, This is for the most part a copy of Joel Newkirk's serenity theme Static MAC addresses for usb devices Ability to cut 30 seconds off boot time - DO NOT use this if you use bind-home - install udev-static-devices to get this speed boost Keyboard goes away after use Updated /etc/network/interfaces to give usb0 a metric Known issues If you use bind-home make sure it is on a journaling filesystem such as ext 3 Before install this release backup your contacts in ~/.paroli/ as there have been some reports of contacts being deleted. One bug relating to missing contacts has been fixed but there's a chance that there is another one. Also make sure your home directory is on a journaling filesystem Some oeventsd rules are ignored ( framework oeventsd problems ) - don't suspend while plugged in http://trac.freesmartphone.org/ticket/381 - work around unplug usb until LED goes out, then plug usb in ( need to keep the device awake by touching the screen until the LED comes back on) connman doesn't give a default route to wifi if usb0 already is the default route -work around either ifdown usb0 from a terminal or route del default gw 192.168.0.202 Bugs fixed after editing contacts - some contacts erased no suspend after phone call FSO 435 Parts of frameworkd stop working FSO 416 improper battery level in illume Keyboard collapses after use Angus ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- Warren Baird - Photographer and Digital Artist http://www.synergisticimages.ca ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
On Wed, Jun 17, 2009 at 12:21 AM, Risto H. Kurppa ri...@kurppa.fi wrote: On Wed, Jun 17, 2009 at 12:25 AM, Michal Brzozowskiruso...@poczta.fm wrote: I found two problems so far. 1. When waking up from suspend while in horizontal mode, there is garbage on the screen and it's unusable. Can you take a photo to show it? 2. It's impossible to scroll in paroli, it's too sensitive and you always end up pressing a button What screen? Settings might still have some issues but the other should have it working pretty well.. 3. Paroli doesn't support horizontal mode too well. That's be the third problem, you only promised two :) But yes, it's true that when it's been designed, the horizontal mode has not been kept in mind (actually I think ~no one has tested it before you..). So possibly some work will be done there in the future.. Other than that it's pretty stable, good job! I agree :) Hi all , Just flash to help testing :) I really love paroli ! Better each release appearing :) I found the same issue than Michal, not a real problem, but it's hard to scroll without clicking. not a big deal anyway... BTW, with testing release 4 you could return into illume by changing the profile, but now I change profile to illume without any effect... is it still possible ? How to access to apps ? congrats for the great work :) r -- | risto h. kurppa | risto at kurppa dot fi | http://risto.kurppa.fi ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- Steven Le Roux Jabber-ID : ste...@jabber.fr 0x39494CCB ste...@le-roux.info 2FF7 226B 552E 4709 03F0 6281 72D7 A010 3949 4CCB ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Om2009 testing release 5
Hmm.Well, my opkg update ; opkg upgrade was partially successful. It ended with this message: Configuring hal Cannot create link over existing -/var/log-. Cannot create link over existing -/etc/resolv.conf-. Reloading system message bus config: Using **pending_return in dbus_connection_send_with_reply_setup() without pending_setup is deprecated and strongly discouraged Using **pending_return in dbus_connection_send_with_reply_setup() without pending_setup is deprecated and strongly discouraged Error org.freedesktop.DBus.Error.Failed: Element syslog not allowed inside busconfig in configuration file but I'm not sure if that's related to the problem I'm seeing. Paroli itself seems pretty good. However, when I enable the paroli-illume theme, illume doesn't start up. So for the moment I can't get at any of the other apps on the phone without sshing in. A few comments: I like the fact that you can see where the buttons are now... However, I'm afraid that I don't particularly like showing the buttons with the four dots at the corners - I think it's kind of an odd way to display them. I'd still like to see a visual indication of 'slidyness' - when things can be slide to the side. As I think someone else mentioned, the scolling on the settings dialog is broken - it always selects the thing you click on, even if you scroll the list. I'll have to do more testing before I can comment on the reliability. Warren On Tue, Jun 16, 2009 at 6:44 PM, Warren Baird wjba...@alumni.uwaterloo.cawrote: Woot - I'm trying the opkg update ; opkg upgrade approach now. I look forward to the improvements a lot. One question - is the 'bind-home' approach documented somewhere? Both google and searching on the wiki haven't helped me find info on how to set this up. I've actually got om2009 on my sd-card right now, so it isn't something I need right away - but I think I'm getting confident enough in OM2009 that I'll soon ditch the QtE install I've been keeping for 'emergencies' on the built-in flash. Warren On Tue, Jun 16, 2009 at 1:24 PM, Angus Ainslie nyt...@openmoko.orgwrote: Hi All, There have been some major show stoppers fixed in the last week. As usual there are additional instructions here. http://wiki.openmoko.org/wiki/Om2009 There is also a new page for community involvement. Many of these wishlist items need someone to implement them. If you are interested in in owning one of the wishlist items come and join #paroli or send me an email http://wiki.openmoko.org/wiki/Om_2009_get_active Careful attention was paid to package versioning so opkg update opkg upgrade *might* work. You must also do rm -r /home/root/.e. If you want to preserve your settings with flashing the full image use the bind-home method. New features Settings available from the main screen Improved call handling - should limit races in oeventsd Better list handling More consistent interface New paroli-serenity theme, This is for the most part a copy of Joel Newkirk's serenity theme Static MAC addresses for usb devices Ability to cut 30 seconds off boot time - DO NOT use this if you use bind-home - install udev-static-devices to get this speed boost Keyboard goes away after use Updated /etc/network/interfaces to give usb0 a metric Known issues If you use bind-home make sure it is on a journaling filesystem such as ext 3 Before install this release backup your contacts in ~/.paroli/ as there have been some reports of contacts being deleted. One bug relating to missing contacts has been fixed but there's a chance that there is another one. Also make sure your home directory is on a journaling filesystem Some oeventsd rules are ignored ( framework oeventsd problems ) - don't suspend while plugged in http://trac.freesmartphone.org/ticket/381 - work around unplug usb until LED goes out, then plug usb in ( need to keep the device awake by touching the screen until the LED comes back on) connman doesn't give a default route to wifi if usb0 already is the default route -work around either ifdown usb0 from a terminal or route del default gw 192.168.0.202 Bugs fixed after editing contacts - some contacts erased no suspend after phone call FSO 435 Parts of frameworkd stop working FSO 416 improper battery level in illume Keyboard collapses after use Angus ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- Warren Baird - Photographer and Digital Artist http://www.synergisticimages.ca -- Warren Baird - Photographer and Digital Artist http://www.synergisticimages.ca ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community