Re: QtMoko v55 for Freerunner upgraded to wheezy
Am 16.04.2013 14:35, schrieb Radek Polak: .. The wheezy images are now here: https://sourceforge.net/projects/qtmoko/files/GTA02/ Hallo, i installed the wheezy-Version 55 for GTA02 on a uSD-Card. Formatted as ext3, copyd the archiv and: $ tar xzvpf qtmoko-debian-gta02-v55.tar.gz After reboot everything seems OK. Then I connected with ssh and: $ apt-get update $ apt-get upgrade After the next reboot a endless loop dumps messages on the screen very fast. I had to take a Photo to read: udevd [659]: unable to receive ctrl connection: Function not implemented I repeated this with the same result. Now I'm going to format and untar again but without upgrade. What must be fixed before I can use upgrade again? -- Frank ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: QtMoko v55 for Freerunner upgraded to wheezy
Hello! I don't remember the solution, but there was already a discussion about that here : http://comments.gmane.org/gmane.comp.handhelds.openmoko.community/63237 IIRC, udevd isn't relevant for GTA02 (but needed for GTA04) and so it can be deactivated. Regards, Adrien Le mercredi 22 mai 2013 à 11:00 +0200, Frank a écrit : Am 16.04.2013 14:35, schrieb Radek Polak: .. The wheezy images are now here: https://sourceforge.net/projects/qtmoko/files/GTA02/ Hallo, i installed the wheezy-Version 55 for GTA02 on a uSD-Card. Formatted as ext3, copyd the archiv and: $ tar xzvpf qtmoko-debian-gta02-v55.tar.gz After reboot everything seems OK. Then I connected with ssh and: $ apt-get update $ apt-get upgrade After the next reboot a endless loop dumps messages on the screen very fast. I had to take a Photo to read: udevd [659]: unable to receive ctrl connection: Function not implemented I repeated this with the same result. Now I'm going to format and untar again but without upgrade. What must be fixed before I can use upgrade again? signature.asc Description: This is a digitally signed message part ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: QtMoko v55 for Freerunner upgraded to wheezy
On Sun, 12 May 2013 17:36:35 +0200, Radek Polak pson...@seznam.cz wrote: [...] Hi, is it configured properly? Make sure you have these values in /etc/default/gpsd: START_DAEMON=true DEVICES=/dev/ttySAC1 GPSD_OPTIONS=-b The config file is correct. I'll reinstall v55 from scratch to check if I did any other modifications that caused the problem. I'll file an issue on Github once I get to do it. Raphael -- Dipl.-Medieninf. Raphael Wimmer Wiss. Mitarbeiter / Research Assistant Doktorand / PhD student Ludwig-Maximilians-Universität München E-Mail: raphael.wim...@ifi.lmu.de LFE Medieninformatik Skype: real_raphman Amalienstr. 17 / Raum 206WWW: http://www.medien.ifi.lmu.de 80333 MünchenTel:+49 (89) 2180-4659 Germany Fax:+49 (89) 2180-99-4659 ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: QtMoko v55 for Freerunner upgraded to wheezy
On Tue, 16 Apr 2013 14:35:47 +0200, Radek Polak pson...@seznam.cz wrote:
Hi,
i have now moved the experimental wheezy based qtmoko v55 to stable.
Just a heads-up for the next pure-wheezy version:
Upgrading gpsd from 2.95 (squeeze, and installed in v55) to 3.6 (wheezy)
results in gpsd no longer recognizing the GPS chip.
Not sure if this is an error on my side but:
I have installed v55 from the linked source. While playing around with
additional packages, I had to uninstall and reinstall gpsd.
At this point, apt chose the wheezy package for gpsd (3.6).
After the upgrade, QtPedometer, qtgps don't get any data. NeronGPS even
hangs when initializing the GPS chip.
Downgrading back to gpsd 2.95 fixes the problem.
with gpsd 2.95 - the DEVICE line appears after starting NeronGPS
root@neo:~# netcat localhost 2947
{class:VERSION,release:2.95,rev:2011-12-06T19:20:53,proto_major:3,proto_minor:3}
{class:DEVICE,path:/dev/ttySAC1,activated:1368350470.77,driver:Generic
NMEA,native:0,bps:9600,parity:N,stopbits:1,cycle:1.00}
and with gpsd 3.6:
root@neo:~# netcat localhost 2947
{class:VERSION,release:3.6,rev:3.6,proto_major:3,proto_minor:7}
[no DEVICE ever appears]
Btw: why does only NeronGPS show the number of visible satellites in the
status bar?
Best,
Raphael
--
Dipl.-Medieninf. Raphael Wimmer
Wiss. Mitarbeiter / Research Assistant
Doktorand / PhD student
Ludwig-Maximilians-Universität München E-Mail: raphael.wim...@ifi.lmu.de
LFE Medieninformatik Skype: real_raphman
Amalienstr. 17 / Raum 206WWW:
http://www.medien.ifi.lmu.de
80333 MünchenTel:+49 (89) 2180-4659
Germany Fax:+49 (89) 2180-99-4659
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Re: QtMoko v55 for Freerunner upgraded to wheezy
On Sunday, May 12, 2013 11:47:26 AM Raphael Wimmer wrote: On Tue, 16 Apr 2013 14:35:47 +0200, Radek Polak pson...@seznam.cz wrote: Hi, i have now moved the experimental wheezy based qtmoko v55 to stable. Just a heads-up for the next pure-wheezy version: Upgrading gpsd from 2.95 (squeeze, and installed in v55) to 3.6 (wheezy) results in gpsd no longer recognizing the GPS chip. Not sure if this is an error on my side but: I have installed v55 from the linked source. While playing around with additional packages, I had to uninstall and reinstall gpsd. At this point, apt chose the wheezy package for gpsd (3.6). After the upgrade, QtPedometer, qtgps don't get any data. NeronGPS even hangs when initializing the GPS chip. Downgrading back to gpsd 2.95 fixes the problem. with gpsd 2.95 - the DEVICE line appears after starting NeronGPS Raphael Hi, is it configured properly? Make sure you have these values in /etc/default/gpsd: START_DAEMON=true DEVICES=/dev/ttySAC1 GPSD_OPTIONS=-b Regards Radek ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: QtMoko v55 for Freerunner upgraded to wheezy
On Saturday, April 20, 2013 09:02:11 AM robin wrote: hi radek, thanks a lot again for the new gta02 version. what is the best way to do a clean upgrade (transferring sms and contacts?) if I remember correctly one can send the contacts to onself via email and then clicking on the mail would import them. is this still correct? do alternative options exist? Hi, yes this could work - i have all my contacts exported in vcf format using this method. I think that copying whole /home/root should work too. Regards Radek ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: QtMoko v55 for Freerunner upgraded to wheezy
Am Sonntag, 21. April 2013, 07:47:50 schrieb Rainer Glaschick: Hi, I had the same problem with navit, but not yet reported it, because there are so many other weak points that take time to find. To see the console messages, including error messages, login via ssh for a shell command line, then enter root@neo:/root# . /opt/qtmoko/qpe.env to set the environment. Now you can call any app directly: root@neo:/root# navit navit: error while loading shared libraries: libcrypto.so.0.9.8: cannot open shared object file: No such file or directory Using ldd, you can check this: root@neo:/root# ldd /opt/qtmoko/bin/navit libgthread-2.0.so.0 = /usr/lib/arm-linux-gnueabi/libgthread-2.0.so.0 (0x40008000) libgmodule-2.0.so.0 = /usr/lib/arm-linux-gnueabi/libgmodule-2.0.so.0 (0x40013000) librt.so.1 = /lib/arm-linux-gnueabi/librt.so.1 (0x4001f000) libglib-2.0.so.0 = /lib/arm-linux-gnueabi/libglib-2.0.so.0 (0x4002e000) libz.so.1 = /lib/arm-linux-gnueabi/libz.so.1 (0x40116000) libcrypto.so.0.9.8 = not found libm.so.6 = /lib/arm-linux-gnueabi/libm.so.6 (0x40135000) libgcc_s.so.1 = /lib/arm-linux-gnueabi/libgcc_s.so.1 (0x401de000) libpthread.so.0 = /lib/arm-linux-gnueabi/libpthread.so.0 (0x40208000) libc.so.6 = /lib/arm-linux-gnueabi/libc.so.6 (0x40228000) libdl.so.2 = /lib/arm-linux-gnueabi/libdl.so.2 (0x4035e000) /lib/ld-linux.so.3 (0x2a00) libpcre.so.3 = /lib/arm-linux-gnueabi/libpcre.so.3 (0x4036a000) Obviously is libcrypto missing in the dependencies. I have no idea how to obtain libcrypto, it is installed in my desktop Debian, but I did not yet find out with which packet. libcrypto.so.9.8 is included in libssl0.9.8, which was shipped with squeeze, but not with wheezy. The current package is libssl1.0.0, that means, you need to rebuild navit. Rico signature.asc Description: This is a digitally signed message part. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: QtMoko v55 for Freerunner upgraded to wheezy
hi radek, thanks a lot again for the new gta02 version. what is the best way to do a clean upgrade (transferring sms and contacts?) if I remember correctly one can send the contacts to onself via email and then clicking on the mail would import them. is this still correct? do alternative options exist? br robin ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: QtMoko v55 for Freerunner upgraded to wheezy
hi, I tried to run navit (installed directly from qtmoko apps) but it instantaneously crashes. what is the best way to get the logs? br robin ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: QtMoko v55 for Freerunner upgraded to wheezy
Hi, I had the same problem with navit, but not yet reported it, because there are so many other weak points that take time to find. To see the console messages, including error messages, login via ssh for a shell command line, then enter root@neo:/root# . /opt/qtmoko/qpe.env to set the environment. Now you can call any app directly: root@neo:/root# navit navit: error while loading shared libraries: libcrypto.so.0.9.8: cannot open shared object file: No such file or directory Using ldd, you can check this: root@neo:/root# ldd /opt/qtmoko/bin/navit libgthread-2.0.so.0 = /usr/lib/arm-linux-gnueabi/libgthread-2.0.so.0 (0x40008000) libgmodule-2.0.so.0 = /usr/lib/arm-linux-gnueabi/libgmodule-2.0.so.0 (0x40013000) librt.so.1 = /lib/arm-linux-gnueabi/librt.so.1 (0x4001f000) libglib-2.0.so.0 = /lib/arm-linux-gnueabi/libglib-2.0.so.0 (0x4002e000) libz.so.1 = /lib/arm-linux-gnueabi/libz.so.1 (0x40116000) libcrypto.so.0.9.8 = not found libm.so.6 = /lib/arm-linux-gnueabi/libm.so.6 (0x40135000) libgcc_s.so.1 = /lib/arm-linux-gnueabi/libgcc_s.so.1 (0x401de000) libpthread.so.0 = /lib/arm-linux-gnueabi/libpthread.so.0 (0x40208000) libc.so.6 = /lib/arm-linux-gnueabi/libc.so.6 (0x40228000) libdl.so.2 = /lib/arm-linux-gnueabi/libdl.so.2 (0x4035e000) /lib/ld-linux.so.3 (0x2a00) libpcre.so.3 = /lib/arm-linux-gnueabi/libpcre.so.3 (0x4036a000) Obviously is libcrypto missing in the dependencies. I have no idea how to obtain libcrypto, it is installed in my desktop Debian, but I did not yet find out with which packet. Rainer On 21.04.2013 06:28, robin wrote: hi, I tried to run navit (installed directly from qtmoko apps) but it instantaneously crashes. what is the best way to get the logs? br robin ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- Rainer Glaschick, Paderborn, Germany ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: QtMoko v55 for Freerunner upgraded to wheezy
I have a wpa psk secured network at home and everything worked out of the box. Many thanks for keeping the GTA02 image of qtmoko alive!!! br robin ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: QtMoko v55 for Freerunner upgraded to wheezy
Thanks Radek! I don't know if it's a hardware issue, but after upgrading to v55 my wireless stopped working. Relevant output from dmesg: [3.72] AR6000 Reg Code = 0x4060 [ 8417.06] AR6000 disconnected [ 8420.02] AR6000 Reg Code = 0x807c [ 8432.35] ar6000_ioctl_siwauth(): Unknown flag 0xc [ 8432.36] AR6000 disconnected [ 8432.43] AR6000 connected event on freq 2437 with bssid 68:7f:74:cf:30:06 listenInterval=100, beaconInterval = 100, beaconIeLen = 26 assocReqLen=57 assocRespLen =59 [ 8631.83] ar6000_ioctl_siwauth(): Unknown flag 0xc [ 8649.86] ar6000_ioctl_siwauth(): Unknown flag 0xc [ 9176.57] ar6000_ioctl_siwauth(): Unknown flag 0xc [ 9196.61] ar6000_ioctl_siwauth(): Unknown flag 0xc Any hint? Regards, On Tue, 2013-04-16 at 14:35 +0200, Radek Polak wrote: Hi, i have now moved the experimental wheezy based qtmoko v55 to stable. I have also fixed the ubifs image so that it now boots ok (thanks to gena2x). I am not aware of any regressions and now it should be easier to support GTA02 and GTA04 because of same package versions etc... The wheezy images are now here: https://sourceforge.net/projects/qtmoko/files/GTA02/ the old squeeze images are here: https://sourceforge.net/projects/qtmoko/files/Old/ I will also update the build instructions when i have some more time. BR Radek ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- tiago ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: QtMoko v55 for Freerunner upgraded to wheezy
On Thursday, April 18, 2013 04:59:54 PM Tiago B. Vaz wrote: Thanks Radek! I don't know if it's a hardware issue, but after upgrading to v55 my wireless stopped working. Relevant output from dmesg: [3.72] AR6000 Reg Code = 0x4060 [ 8417.06] AR6000 disconnected [ 8420.02] AR6000 Reg Code = 0x807c [ 8432.35] ar6000_ioctl_siwauth(): Unknown flag 0xc [ 8432.36] AR6000 disconnected [ 8432.43] AR6000 connected event on freq 2437 with bssid 68:7f:74:cf:30:06 listenInterval=100, beaconInterval = 100, beaconIeLen = 26 assocReqLen=57 assocRespLen =59 [ 8631.83] ar6000_ioctl_siwauth(): Unknown flag 0xc [ 8649.86] ar6000_ioctl_siwauth(): Unknown flag 0xc [ 9176.57] ar6000_ioctl_siwauth(): Unknown flag 0xc [ 9196.61] ar6000_ioctl_siwauth(): Unknown flag 0xc Any hint? Hi, i dont think it is kernel related problem. You can try with squeeze compiled kernel: http://qtmoko.sourceforge.net/debian/gta02/armel/linux-image-2.6.34-qtmoko- gta02_55-1_armel.deb if it makes a difference. Btw for me worked connection to my open network - maybe encrypted networks are problematic now... Regards Radek ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: QtMoko v55 for Freerunner upgraded to wheezy
Thank you uro On Tue, 16 Apr 2013 15:16:50 +0200, Matteo Zaffonato zaff...@gmail.com wrote: Thank you very much Radek! I will try it this evening. Best regards Matteo Il 16/04/2013 14.35, Radek Polak ha scritto: Hi, i have now moved the experimental wheezy based qtmoko v55 to stable. I have also fixed the ubifs image so that it now boots ok (thanks to gena2x). I am not aware of any regressions and now it should be easier to support GTA02 and GTA04 because of same package versions etc... The wheezy images are now here: https://sourceforge.net/projects/qtmoko/files/GTA02/ the old squeeze images are here: https://sourceforge.net/projects/qtmoko/files/Old/ I will also update the build instructions when i have some more time. BR Radek ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- 不要催我!你曾經問過梵谷畫很快嗎? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: QtMoko v55 for Freerunner upgraded to wheezy
Hi Radek, thanks a lot. I've tried it and found no regressions as well. Just a stupid question: do have I to change something in the repo list? Cheers, Giacomo Hi, i have now moved the experimental wheezy based qtmoko v55 to stable. I have also fixed the ubifs image so that it now boots ok (thanks to gena2x). I am not aware of any regressions and now it should be easier to support GTA02 and GTA04 because of same package versions etc... The wheezy images are now here: https://sourceforge.net/projects/qtmoko/files/GTA02/ the old squeeze images are here: https://sourceforge.net/projects/qtmoko/files/Old/ I will also update the build instructions when i have some more time. BR Radek ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- ## giacomo 'giotti' mariani gpg --keyserver pool.sks-keyservers.net --recv-key 0x99bfa859 O ASCII ribbon campaign: stop HTML mail www.asciiribbon.org ## ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: QtMoko v55 for Freerunner upgraded to wheezy
Thank you very much Radek! I will try it this evening. Best regards Matteo Il 16/04/2013 14.35, Radek Polak ha scritto: Hi, i have now moved the experimental wheezy based qtmoko v55 to stable. I have also fixed the ubifs image so that it now boots ok (thanks to gena2x). I am not aware of any regressions and now it should be easier to support GTA02 and GTA04 because of same package versions etc... The wheezy images are now here: https://sourceforge.net/projects/qtmoko/files/GTA02/ the old squeeze images are here: https://sourceforge.net/projects/qtmoko/files/Old/ I will also update the build instructions when i have some more time. BR Radek ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
