Re: qtmoko v32 (experimental)
Radek Polak píše v Po 07. 02. 2011 v 06:58 +0100: On Monday 07 February 2011 00:54:37 Hrabosh wrote: I was trying to run NAvit and QX asked me whether to install Xorg server or Xglamo. I did choose Xorg server ... ... when R(apt)or finished installation I was trying to run Navit but Xorg server didn't load ... Xorg. log is attached. It would be interesting to check if the installation wrote correct /etx/X11/xorg.conf Attached. Seems good to me. It would be also interesting to shutdown qtmoko and run X server from ssh console: /etc/init.d/qpe.sh stop Xorg The very same behaviour. Regards Radek ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community Section Module Loadglx Loaddri2 EndSection Section Monitor Identifier LCD Panel EndSection Section Device Identifier Glamo Graphics Chip Driver glamo EndSection Section Screen Identifier Default Screen Device Glamo Graphics Chip Monitor LCD Panel EndSection Section InputDevice Identifier Power Button Driver evdev Option Device/dev/input/event0 EndSection Section InputDevice Identifier AUX Button Driver evdev Option Device/dev/input/event2 EndSection Section InputDevice Identifier Touchscreen Driver evdev Option Device/dev/input/event1 EndSection Section ServerLayout Identifier Default Layout Screen Default Screen InputDevice Power Button InputDevice AUX Button InputDevice Touchscreen EndSection ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: qtmoko v32 (experimental)
Hi, I replaced my v31 by v32 a few days ago. BT seems to run, although I hear nothing in my handsfree set. But it may be just wrong volume settings. But file transfer, etc. works fine. I was trying to run NAvit and QX asked me whether to install Xorg server or Xglamo. I did choose Xorg server ... ... when R(apt)or finished installation I was trying to run Navit but Xorg server didn't load ... Xorg. log is attached. Thx for any help, BTW... USB host mode is also working. I was using PL2303 based USBtoRS232 converter and worked fine. Although I had to modprobe pl2303 first. zb. Radek Polak píše v So 05. 02. 2011 v 18:18 +0100: Ole Carlsen wrote: Did we loose the languages? No, i just build the branch without languages. Next time i will do better, i promise :-) Regards Radek ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community X.Org X Server 1.7.7 Release Date: 2010-05-04 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.32 armv5tel Debian Current Operating System: Linux Holly 2.6.34.7-v32 #1 Tue Jan 18 23:44:59 CET 2011 armv4tl Kernel command line: loglevel=4 console=tty0 console=ttySAC2,115200 init=/sbin/init ro mtdparts=physmap-flash:-(nor);neo1973-nand:0x0004(qi),0x0004(depr-ub-env),0x0080(kernel),0x000a(depr),0x0004(identity-ext2),0x0f6a(rootfs) root=/dev/mmcblk0p2 rootdelay=1 console=tty0 loglevel=3 rootwait Build Date: 12 January 2011 03:54:41AM xorg-server 2:1.7.7-11 (Cyril Brulebois k...@debian.org) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Sun Feb 6 23:33:15 2011 (==) Using config file: /etc/X11/xorg.conf (==) Using system config directory /usr/share/X11/xorg.conf.d (==) ServerLayout Default Layout (**) |--Screen Default Screen (0) (**) | |--Monitor LCD Panel (**) | |--Device Glamo Graphics Chip (**) |--Input Device Power Button (**) |--Input Device AUX Button (**) |--Input Device Touchscreen (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory /usr/share/fonts/X11/misc does not exist. Entry deleted from font path. (WW) The directory /usr/share/fonts/X11/cyrillic does not exist. Entry deleted from font path. (WW) The directory /usr/share/fonts/X11/100dpi/ does not exist. Entry deleted from font path. (WW) The directory /usr/share/fonts/X11/75dpi/ does not exist. Entry deleted from font path. (WW) The directory /usr/share/fonts/X11/Type1 does not exist. Entry deleted from font path. (WW) The directory /usr/share/fonts/X11/100dpi does not exist. Entry deleted from font path. (WW) The directory /usr/share/fonts/X11/75dpi does not exist. Entry deleted from font path. (WW) The directory /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType does not exist. Entry deleted from font path. (==) FontPath set to: built-ins (==) ModulePath set to /usr/lib/xorg/modules (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (II) Loader magic: 0x1aa174 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (--) using VT number 7 (II) extmod will be loaded by default. (II) dbe will be loaded by default. (II) glx will be loaded. This was enabled by default and also specified in the config file. (II) record will be loaded by default. (II) dri will be loaded by default. (II) dri2 will be loaded. This was enabled by default and also specified in the config file. (II) LoadModule: glx (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor=X.Org Foundation compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: dri2 (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor=X.Org Foundation compiled for 1.7.7, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: extmod (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor=X.Org Foundation compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II)
Re: qtmoko v32 (experimental)
On Monday 07 February 2011 00:54:37 Hrabosh wrote: I was trying to run NAvit and QX asked me whether to install Xorg server or Xglamo. I did choose Xorg server ... ... when R(apt)or finished installation I was trying to run Navit but Xorg server didn't load ... Xorg. log is attached. It would be interesting to check if the installation wrote correct /etx/X11/xorg.conf It would be also interesting to shutdown qtmoko and run X server from ssh console: /etc/init.d/qpe.sh stop Xorg Regards Radek ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: qtmoko v32 (experimental)
Ole Carlsen wrote: Did we loose the languages? No, i just build the branch without languages. Next time i will do better, i promise :-) Regards Radek ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: qtmoko v32 (experimental) - led indicators
hi, since v31 I fount a reduced led light under the power button (near the usb port) while it's connected and charging the orange is really soft and almost unnoticeable I don't know if it's a wanted change or a bug a similar issue with the wifi blue led, but it remains completely off and it's now unclear when we have an open connection unless we open the internet tool. (also we don't have an icon on the display... eg like the G for gprs) regards -- ALFA21 IS PROVIDED AS IS AND WITHOUT WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: qtmoko v32 (experimental)
Den 19-01-2011 22:53, Radek Polak skrev: Hi, i have released new experimental qtmoko images. They are now based on debian squeeze and they have new (not finished) bluetooth support based on bluez4. Did we loose the languages? -- Ole @ Carlsen-web.dk ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: qtmoko v32 (experimental) - led indicators
2011/1/21 Alfa21 freerun...@my.is.it [...] (also we don't have an icon on the display... eg like the G for gprs) for what I saw, to insert a new icon (maybe in the top bar) it is necessary to modify the theme and add the icon and the proper parameters. Regards Joif ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: qtmoko v32 (experimental)
Great!!! Thanks!! :D:D:D:D:D Kosa El 19/01/11 15:53, Radek Polak escribió: Hi, i have released new experimental qtmoko images. They are now based on debian squeeze and they have new (not finished) bluetooth support based on bluez4. You can download and get more info here [1] [2]. Here are changes since v31: - switched from debian lenny-squeeze - switched from bluez3-bluez4 - fixed the bug in power manager (switching battery/lock/charger) - fixed USB device/host scripts for recent kernel - fixed default DNS - qx can install X server (xglamo/xorg-glamo) - X server is no longer in image - updated omhacks - fixed qvga in qmplayer/qmokoplayer - GPS is now really powered down when no one uses it - SD card image has also manual pages and other data - qemu build host for people who want to make release themselves (see [4]) - added files and info for native compiling on ARM host As far as i have tested - most of the stuff should be ok. But the release i marked experimental, because the changes are big. Bluetooth is still work in progress. There are still some functions not implemented and bluetooth handsfree is bugged (see below). I was able it to pair with new device, you can see available services, you can use obex for sending/receiving/browsing, A2DP works just fine. I am not sure if works the scenario when headset connects to Neo, but Neo-Headset direction works. There is also bug that sometimes you cant see just paired device. Workaround is exit bt settings and enter it back. Bluetooth handset: after pairing and connecting i can always hear phone ringing, i can use the buttons, but sound is there just randomly. For me it works somehing like this: remove pairing with headset (if any). reboot phone make normal call (no bluetooth headset involved) pair with headset connect handsfree make call with bt headset - sound is ok Once it starts working it's ok. It would be nice to reproduce this bug and fix it. Any suggestions and findings out how to reproduce are very welcome. As for QX - it can now install X server. You will need interenet connection. The xorg install should be quite ok, Xglamo install is hack, you will have to wait long time and it gives no output, but it should work. I'll fix it for next release. Enjoy new version and bug reports are welcome (alhought i can start fixing them not sooner then after 3 weeks). And also patches are welcome - i dont have single one for this release!!! Cheers Radek [1] https://sourceforge.net/projects/qtmoko/files/Experimental/ [2] http://www.qtmoko.org/wiki/Main_Page [3] http://activationrecord.net/radekp/qtmoko/ [4] https://github.com/radekp/qtmoko/blob/master/doc/txt/debian_rootfs_howto.txt ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
