Re: [coreboot] How to build coreboot with alternate toolchain?

Dear Jonathan, Am Donnerstag, den 12.05.2016, 22:48 +0200 schrieb Jonathan Neuschäfer: > On Thu, May 12, 2016 at 10:03:14PM +0200, Paul Menzel wrote: > > GCC 6 is in Debian Sid/unstable [1] in parallel to the default GCC 5.3. > > The binary is `/usr/bin/gcc-6`. I’d like to quickly test this

[coreboot] Fwd: [baytrail_FSP] question about lpss device with ACPI mode in win8

1. PcdLpssSioEnablePciMode setting is LPSS_PCI_MODE_DISABLE and I am sure lpss is in acpi mode, because I can't find any lpss device in pci list. 2. The cpu type is N2807. -- coreboot mailing list: coreboot@coreboot.org https://www.coreboot.org/mailman/listinfo/coreboot

[coreboot] Regarding CONFIG_CBFS_LOCATION corruption of sea bios using coreboot

Hi All, I am using coreboot with seabios payload to boot to Win7. But sometimes Seabios is not able to find its own CBFS partition in the coreboot image and causes the exception and does not boot OS. Below is source code which throws exception: In SeaBIOS config value, the default value of

Re: [coreboot] How to build coreboot with alternate toolchain?

On Thu, May 12, 2016 at 10:03:14PM +0200, Paul Menzel wrote: > Dear coreboot folks, > > > GCC 6 is in Debian Sid/unstable [1] in parallel to the default GCC 5.3. > The binary is `/usr/bin/gcc-6`. I’d like to quickly test this with > coreboot to see if everything still builds and runs fine. > >

[coreboot] How to build coreboot with alternate toolchain?

Dear coreboot folks, GCC 6 is in Debian Sid/unstable [1] in parallel to the default GCC 5.3. The binary is `/usr/bin/gcc-6`. I’d like to quickly test this with coreboot to see if everything still builds and runs fine. Running `make HOSTCC=gcc-6 CC=gcc-6` partially works. GCC 6 is used for the

Re: [coreboot] Trouble with T60p (whine and trackpoint dead)

Hi, David Griffith wrote: > > The first flash was successful, as you are clearly using coreboot. :) > > > > It's important that you flash again. Now that you have coreboot just > > run flashrom to write the coreboot.rom. Set the BUC.TS bit > > appropriately, otherwise your machine will not boot

[coreboot] I want to use Coreboot for booting an Allwinner A13 computer..

First of all, i want to thank the administrator of the list for giving me a place on this. I have an A13 based board, wich i wish to be able to start some sort of gnu/linux with lxde distro from an usb hard drive, but a real hard drive and not just an usb pen or flash card. I also wish it

Re: [coreboot] Coreboot image and seabios payload with debug symbols

Hi Zoran I am having Intel system studio trial version and also XDP3 connector. Regards Mayuri From: Zoran Stojsavljevic [mailto:zoran.stojsavlje...@gmail.com] Sent: 12 May 2016 17:31 To: Mayuri Tendulkar ; coreboot@coreboot.org Subject: Re: [coreboot] Coreboot

Re: [coreboot] Coreboot image and seabios payload with debug symbols

Hello Mayuri, [3] The other way how to use ITP BlueBox XDP3 is to use ISS (INTEL System Studio). I guess, there is 30 day free trial for ISS (on the intel.com public web, there is an ISS download somewhere), but if you would like to have ISS activated, you need to contact ISS INTEL support.

Re: [coreboot] Trouble with T60p (whine and trackpoint dead)

On Thu, 12 May 2016, Peter Stuge wrote: David Griffith wrote: lenovobios_firstflash and lenovobios_secondflash scripts Please do not confuse coreboot with libreboot. Instructions for/about libreboot are specific to that project, and nothing that the coreboot community can support you with.

Re: [coreboot] Trouble with T60p (whine and trackpoint dead)

David Griffith wrote: > lenovobios_firstflash and lenovobios_secondflash scripts Please do not confuse coreboot with libreboot. Instructions for/about libreboot are specific to that project, and nothing that the coreboot community can support you with. > Did I actually succeed in flashing my

Re: [coreboot] Coreboot image and seabios payload with debug symbols

Hello Mayuri, Sorry, I am busy with some other things (trying to perfect my Deutsch Sprache, and this goes too slow, and too pejorative)... :-( I did not look thru the second document, but here is what I'll advise here: [1] Go to