-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hi all,
after playing little bit I found correct combination that gives
ability to read whole 12MB - binary is here [1]. Couple things that
people have to know (probably should be contributed to docs):
1. enable SERVICE_MODE (by shorting using
On 12/30/18 4:22 AM, Kumonie Williams wrote:
> Hello,
Hi Kumonie,
> Upon further inspection, I cannot find any reference to the SERVICE_MODE
> jumper on Dell's website, only the two you mentioned, RTCRST and PSWD.
> It appears it may only be present on the mid tower form factor model of
> the
Hello,
Upon further inspection, I cannot find any reference to the SERVICE_MODE
jumper on Dell's website, only the two you mentioned, RTCRST and PSWD.
It appears it may only be present on the mid tower form factor model of the
Dell OptiPlex 7010, on which, it is directly under the PCI-e x16 (wired
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
On 12/29/18 4:47 PM, Jeremy Jackson wrote:
>
> On 2018-12-29 10:39 a.m., Kumonie Williams wrote:
Hi Kumonie, Jeremy,
adding Paul and Lynxis to CC as they were initial contributors of change
s.
>
> ...
>
> Though, I do have a question I was
Thanks, I'll keep that in mind.
On Sat, Dec 29, 2018 at 9:47 AM Jeremy Jackson wrote:
>
> On 2018-12-29 10:39 a.m., Kumonie Williams wrote:
>
> ...
>
> Though, I do have a question I was hoping you'd be able to answer:
> The Dell OptiPlex 7010 has a service mode jumper, and, from my
>
On 2018-12-29 10:39 a.m., Kumonie Williams wrote:
...
Though, I do have a question I was hoping you'd be able to answer:
The Dell OptiPlex 7010 has a service mode jumper, and, from my
understanding,
two ROM chips for two firmware images, the primary one used when the
service mode jumper is
Hello,
I would be more than willing to help test coreboot for the Dell OptiPlex
7010, however, I cannot provide assistance for much else at this time.
Though, I do have a question I was hoping you'd be able to answer:
The Dell OptiPlex 7010 has a service mode jumper, and, from my
understanding,
On 12/24/18 8:05 PM, Kumonie Williams wrote:
Hi Kumonie,
> Hello there, I have a question regarding coreboot.
>
> I was wondering if work was still being done to port coreboot to the
> Dell OptiPlex 7010. I was looking at commit
> 882d3c3574cc24f1bcf16b71c5090cc71ef725a6, but it seems the
在 2018/12/25 上午3:05, Kumonie Williams 写道:
> Hello there, I have a question regarding coreboot.
>
> I was wondering if work was still being done to port coreboot to the
> Dell OptiPlex 7010. I was looking at commit
> 882d3c3574cc24f1bcf16b71c5090cc71ef725a6, but it seems the board
> didn’t boot at
9 matches
Mail list logo