Re: [coreboot] SPI Flash does not work on Intel LeafHill CRB

Hi Toan. On BeeProg you can select the offset inside the flash where your image should be loaded to. Just have a look at the lower section in your "load file" dialog box. There is an entry called "Buffer offset for loading". Select positive offset for binary formats and set to 8 MB. That will

Re: [coreboot] SPI Flash does not work on Intel LeafHill CRB

On Thu, Mar 30, 2017 at 4:53 AM, Goetz Salzmann wrote: > Dear Toan, > >> I tried as your suggestion: flashed an 8 MB Intel-provided image, read >> back from SPI chip right after flashing, got a 16 MB file (since SPI >> chip is 16 MB size). >> The first 8 MB of 2 files are

Re: [coreboot] SPI Flash does not work on Intel LeafHill CRB

Dear Goetz, Thanks for your reply. I'm trying to rebuild the image. Another question here: I had an 8 MB Intel-provided image. I'm using BeeProg2C flashing device (with PG4UW software). Is there any "trick" forcing the flashing device to flash 8 MB image into 16 MB SPI chip? Something likes flash

Re: [coreboot] SPI Flash does not work on Intel LeafHill CRB

Dear Toan, > I tried as your suggestion: flashed an 8 MB Intel-provided image, read > back from SPI chip right after flashing, got a 16 MB file (since SPI > chip is 16 MB size). > The first 8 MB of 2 files are exactly the same. So, flashing should > work fine. that's your problem right there.

Re: [coreboot] SPI Flash does not work on Intel LeafHill CRB

Thanks Andrey, that was what I mean. I tried as your suggestion: flashed an 8 MB Intel-provided image, read back from SPI chip right after flashing, got a 16 MB file (since SPI chip is 16 MB size). The first 8 MB of 2 files are exactly the same. So, flashing should work fine. I also went through

Re: [coreboot] SPI Flash does not work on Intel LeafHill CRB

Hi, On 03/29/2017 07:52 PM, Toan Le manh wrote: Hi Andrey, Even I tried flashing with IFWI .bin file released by Intel, the board still doesn't boot. ah, I think I misunderstood you. You were saying even stock Intel-provided image didn't work. If that is the case yes, probably

Re: [coreboot] SPI Flash does not work on Intel LeafHill CRB

Hi Andrey, Even I tried flashing with IFWI .bin file released by Intel, the board > still doesn't boot. So I think the flashing file is not the problem. May problem be caused by flashing tool ? 2017-03-30 9:00 GMT+07:00 Andrey Petrov : > Hi, > > On 03/29/2017 06:48

Re: [coreboot] SPI Flash does not work on Intel LeafHill CRB

Hi, On 03/29/2017 06:48 PM, Toan Le manh wrote: @Andrey: The flashing is OK, but the board doesn't boot anything. The POST CODE is always "0". Even I tried flashing with IFWI .bin file released by Intel, the board still doesn't boot. Where can I select "Use IFWI stitching"? make nconfig,

Re: [coreboot] SPI Flash does not work on Intel LeafHill CRB

@Zoran: I tried flashing with the IFWI .bin file released by Intel, and the file I got after building coreboot and stitching. Both don't work. 2017-03-29 18:00 GMT+01:00 Zoran Stojsavljevic < zoran.stojsavlje...@gmail.com>: > > ...tried flashing SPI chip (Winbond W25Q128FW)... > > Flashing with

Re: [coreboot] SPI Flash does not work on Intel LeafHill CRB

@Andrey: The flashing is OK, but the board doesn't boot anything. The POST CODE is always "0". Even I tried flashing with IFWI .bin file released by Intel, the board still doesn't boot. Where can I select "Use IFWI stitching"? 2017-03-29 14:56 GMT+01:00 Andrey Petrov :

Re: [coreboot] SPI Flash does not work on Intel LeafHill CRB

> ...tried flashing SPI chip (Winbond W25Q128FW)... Flashing with what (context in question)? (we'll come later to INTEL stitching tool, I have good perception/anticipation, developed for by INTEL) ;-) Thank you, Zoran On Wed, Mar 29, 2017 at 1:29 PM, Toan Le manh

Re: [coreboot] SPI Flash does not work on Intel LeafHill CRB

Hi, On 03/29/2017 04:29 AM, Toan Le manh wrote: I got the LeafHill CRB from Intel, tried flashing SPI chip (Winbond W25Q128FW) using BeeProg2C. However nothing worked. The Status Code remained "0". Are you saying the flashing didn't work OR board doesn't boot after? If latter, did you select