Re: [coreboot] ASUS KCMA-D8 workstation board port offer

2017-01-20 Thread Timothy Pearson
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

On 01/20/2017 07:33 AM, Leah Rowe wrote:
> I would also like to point out that Timothy is a psychopath. The
> reason I told him I couldn't pay the final 15k on the KCMA-D8 is
> because I would have ended up *homeless* if I did. He told me he
> didn't care, and that I didn't deserve a home or to eat properly. He
> only cared about that 15k, despite the fact that I already paid the
> full 75 for the D16 contract, and despite all the positive endorsement
> and support that I gave TALOS on libreboot.org when that campaign was
> still running.

All I wish to say is that this is not correct, taken out of context, and
manipulated to sound and mean something very different than it did in
normal online conversation.  The statements above do not reflect
reality, nor what was actually discussed.

Rowe, this is libel in its purest form.  You don't need to compound your
mistakes like this, nor pollute this list with private, confidential
discussions.  You've already admitted you are not going to pay, and
Raptor has already responded by deciding to consider the KCMA-D8 a large
gift to the coreboot community.  All you have accomplished by doing this
was make it so that we are going to have a very difficult time
justifying any work on low to mid range libre software development going
forward.  This doesn't hurt us nearly as much as it hurts the overall
community in the medium range, and I'm saddened to learn that you value
the community and the continuation of reasonably powerful libre-friendly
hardware so little.

- -- 
Timothy Pearson
Raptor Engineering
+1 (415) 727-8645 (direct line)
+1 (512) 690-0200 (switchboard)
https://www.raptorengineering.com
-BEGIN PGP SIGNATURE-
Version: GnuPG v1
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQEcBAEBAgAGBQJYgiydAAoJEK+E3vEXDOFbwZ4IAIDTmGZqfAR1IiU5TB6rYGFL
xtd5nBks1k2uunUP/L06atUZqE63YkY5akII6pt0oXfOJpduokdPq6NpXeMTw2YO
lVrAlGkzPqwIaJmCdB71eoDOQcbYBZBEoi8FJ9TAEule+d3AcqrZiAB1bDXjH6cd
nJdwiXWnPqBLFyCwtY7wkUIJiWAZZHN1hULwpc0P8nZ5LJsmFav3U2y8Vx5M9HKP
ZSRUSE+5P/6Y4jxtWQAdReRVKTkNqx+h/A8fMnTCoYLJcx3q4jOhsr2oXucrIYuh
DbbnFXjGkYkGBjjocMaKPUbQ1DEZYaaEAj0CK/8A9ShWxtSVqBE7z7Pvs4E2mGw=
=nLCr
-END PGP SIGNATURE-

-- 
coreboot mailing list: coreboot@coreboot.org
https://www.coreboot.org/mailman/listinfo/coreboot


Re: [coreboot] ASUS KCMA-D8 workstation board port offer

2017-01-20 Thread Leah Rowe
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256

I would also like to point out that Timothy is a psychopath. The
reason I told him I couldn't pay the final 15k on the KCMA-D8 is
because I would have ended up *homeless* if I did. He told me he
didn't care, and that I didn't deserve a home or to eat properly. He
only cared about that 15k, despite the fact that I already paid the
full 75 for the D16 contract, and despite all the positive endorsement
and support that I gave TALOS on libreboot.org when that campaign was
still running.

I had every intention of paying Timothy that 15k, if I became able to.
But now that will not happen, as a result of what he has done and said
in the last 24 hours.

On 20/01/17 13:15, Leah Rowe wrote:
> I'm just going to paste what I wrote on phoronix's comments
> section.
> 
> On 19/01/17 17:58, Timothy Pearson wrote:
>> Sorry to revive an old thread, but as many of you are aware 
>> Minifree (Leah Rowe) contracted with us to port the KCMA-D8 and 
>> release it.  We performed this work and the KCMA-D8 continues to 
>> operate, however Minifree has decided not to pay their contract
>> on this work.  We strongly recommend that no person do any
>> business with Minifree or its founder Leah Rowe, as they do not
>> honor their legally binding contracts.
> 
> 
> 
> I'm perfectly happy for Raptor to publicly complain. This is only 
> fair, and they have the right. However, there are certain facts
> that I would like to point out clearly for the community.
> 
> Fact 1: I paid 100% of the KGPE-D16 contract with was 75k USD I
> did not pay the KCMA-D8 contract which was 15k. Timothy's email
> implies that I barely paid any of it. The D8 was a mere extension
> on top of the D16 and was a few weeks work for Timothy. The article
> also implies that I was unwilling to pay the remaining 15k. I was
> actually *unable* to pay. Big difference. I fully paid for the
> KGPE-D16 contract, and D16 is all that Minifree sells. Most people
> don't use D8 and it wasn't viable to sell. I would also like to
> point out that several organisations now use the KGPE-D16 with
> libreboot. This includes the Free Software Foundation, to host
> their websites. I personally sacrificed a lot to pull that off. I
> find it deeply insulting that Timothy causes all this fuss about
> the D8. The D8 port was also missold to me. I was lead to believe
> that the hardware was readily available when it wasn't (unlike D16
> hardware), so the work for the D8 was more or less a waste of
> resources.
> 
> Fact 2: Libreboot is not a dead project. We are currently working
> on a new release behind the scenes. We've merged an entirely new
> build system that was written from scratch, to replace the old one
> (the one that is "stagnant and hard to use" according to the
> article). It's in the libreboot git repository as I speak, it was
> merged a few days ago. Please mention this. The new build system is
> extremely modern, flexible and easy to use. It adds many features
> which the old build system lacked, such as (but certainly not
> limited to): * easy ability to build and integrate linux kernel
> payloads (*hint* petitboot *hint*) * integrates all
> chromebook-related utils, for rockchip ARM chromebooks * integrates
> chromeos flashrom, in addition to upstream flashrom * generally
> better design, more modular, easier to maintain, easier to build *
> plus a whole host of other advantages * about 10 new chromebooks
> have been added to libreboot. So much for libreboot being dead,
> eh?
> 
> Please also mention that Libreboot is actually abandoning coreboot
> and will be using Librecore as upstream. This will be covered in
> my upcoming FOSDEM talk too. We have been quite public about this 
> already, on the Libreboot bug tracker.
> 
> I would also like to point out, that so far Raptor Engineering has
> not fixed the bug on KGPE-D16 where above 128GiB RAM becomes
> unstable to the point of being unusable. Only up to 128GiB works.
> This is less than what the contract suggests. They also released
> source code that was broken; memory initialization was broken on
> most memory modules. It took 6 months after the initial release of
> the KGPE-D16 source code for them to make memory initialization
> work, and even now raminit only works with a few modules.
> 
> This is in addition to other bugs which they haven't fixed. I also 
> have IRC logs of private conversations between me and Timothy,
> where he states that he's willing to let the free/libre hardware
> movement crash and burn. This was before the dispute that happened
> yesterday regarding payment.
> 
> 
> 
> 

- -- 
Leah Rowe

Libreboot developer

Use free software. Free as in freedom.
https://en.wikipedia.org/wiki/Free_software

Use a free operating system, GNU+Linux.
https://libreboot.org/docs/distros/
Or BSD:
https://libreboot.org/docs/bsd/

Use a free BIOS.
https://libreboot.org/

Support computer user freedom.
https://peers.community/

Minifree Ltd, trading as Ministry of 

Re: [coreboot] ASUS KCMA-D8 workstation board port offer

2017-01-20 Thread Leah Rowe
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256

I'm just going to paste what I wrote on phoronix's comments section.

On 19/01/17 17:58, Timothy Pearson wrote:
> Sorry to revive an old thread, but as many of you are aware
> Minifree (Leah Rowe) contracted with us to port the KCMA-D8 and
> release it.  We performed this work and the KCMA-D8 continues to
> operate, however Minifree has decided not to pay their contract on
> this work.  We strongly recommend that no person do any business
> with Minifree or its founder Leah Rowe, as they do not honor their
> legally binding contracts.
> 
> 

I'm perfectly happy for Raptor to publicly complain. This is only
fair, and they have the right. However, there are certain facts that I
would like to point out clearly for the community.

Fact 1: I paid 100% of the KGPE-D16 contract with was 75k USD I did
not pay the KCMA-D8 contract which was 15k. Timothy's email implies
that I barely paid any of it. The D8 was a mere extension on top of
the D16 and was a few weeks work for Timothy. The article also implies
that I was unwilling to pay the remaining 15k. I was actually *unable*
to pay. Big difference. I fully paid for the KGPE-D16 contract, and
D16 is all that Minifree sells. Most people don't use D8 and it wasn't
viable to sell. I would also like to point out that several
organisations now use the KGPE-D16 with libreboot. This includes the
Free Software Foundation, to host their websites. I personally
sacrificed a lot to pull that off. I find it deeply insulting that
Timothy causes all this fuss about the D8. The D8 port was also
missold to me. I was lead to believe that the hardware was readily
available when it wasn't (unlike D16 hardware), so the work for the D8
was more or less a waste of resources.

Fact 2: Libreboot is not a dead project. We are currently working on a
new release behind the scenes. We've merged an entirely new build
system that was written from scratch, to replace the old one (the one
that is "stagnant and hard to use" according to the article). It's in
the libreboot git repository as I speak, it was merged a few days ago.
Please mention this. The new build system is extremely modern,
flexible and easy to use. It adds many features which the old build
system lacked, such as (but certainly not limited to):
* easy ability to build and integrate linux kernel payloads (*hint*
petitboot *hint*)
* integrates all chromebook-related utils, for rockchip ARM chromebooks
* integrates chromeos flashrom, in addition to upstream flashrom
* generally better design, more modular, easier to maintain, easier to
build
* plus a whole host of other advantages
* about 10 new chromebooks have been added to libreboot. So much for
libreboot being dead, eh?

Please also mention that Libreboot is actually abandoning coreboot and
will be using Librecore as upstream. This will be covered in my
upcoming FOSDEM talk too. We have been quite public about this
already, on the Libreboot bug tracker.

I would also like to point out, that so far Raptor Engineering has not
fixed the bug on KGPE-D16 where above 128GiB RAM becomes unstable to
the point of being unusable. Only up to 128GiB works. This is less
than what the contract suggests. They also released source code that
was broken; memory initialization was broken on most memory modules.
It took 6 months after the initial release of the KGPE-D16 source code
for them to make memory initialization work, and even now raminit only
works with a few modules.

This is in addition to other bugs which they haven't fixed. I also
have IRC logs of private conversations between me and Timothy, where
he states that he's willing to let the free/libre hardware movement
crash and burn. This was before the dispute that happened yesterday
regarding payment.



- -- 
Leah Rowe

Libreboot developer

Use free software. Free as in freedom.
https://en.wikipedia.org/wiki/Free_software

Use a free operating system, GNU+Linux.
https://libreboot.org/docs/distros/
Or BSD:
https://libreboot.org/docs/bsd/

Use a free BIOS.
https://libreboot.org/

Support computer user freedom.
https://peers.community/

Minifree Ltd, trading as Ministry of Freedom | Registered in England,
No. 9361826 | VAT No. GB202190462
Registered Office: 19 Hilton Road, Canvey Island, Essex SS8 9QA, UK |
Web: https://minifree.org/

-BEGIN PGP SIGNATURE-

iQEcBAEBCAAGBQJYgg1YAAoJEP9Ft0z50c+UTDsH/i6Fwabc7reI7Nnyx0lK64um
8IbM52hji5sJRlZVK3gDgsxRpumXXlIfwEVq0ZTTzvc/ITYO0nrVnQMQAGfGqpDn
r8niubgtTIxpM+ZGKMZTGXTbSjiVi6HhMneckvXl28CljwR5jLwdIeXuD7uW1NCd
JnjOG72UbD8gUfrNao0JDg1q3NFFVwJh9Ri2O0KEP1lvfpgBDx0TQaG6lNTzzOJd
vRUf9UdGAzKvJIvmccUEExXpS7ZDBYtNughr4xHwjaIvoD6+1vvWDoVldkbEGr5Z
Ou9GBXKdQsjaaTbUi+bf+6oenfLElANCXIFdSrRJpMqPefQ1tetKbcqUj1zpVL0=
=3fqL
-END PGP SIGNATURE-

-- 
coreboot mailing list: coreboot@coreboot.org
https://www.coreboot.org/mailman/listinfo/coreboot


Re: [coreboot] ASUS KCMA-D8 workstation board port offer

2017-01-20 Thread Leah Rowe
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256



On 19/01/17 17:58, Timothy Pearson wrote:
> Sorry to revive an old thread, but as many of you are aware
> Minifree (Leah Rowe) contracted with us to port the KCMA-D8 and
> release it.  We performed this work and the KCMA-D8 continues to
> operate, however Minifree has decided not to pay their contract on
> this work.  We strongly recommend that no person do any business
> with Minifree or its founder Leah Rowe, as they do not honor their
> legally binding contracts.

Once again, you are painting the picture to be worse than it actually is
.

I paid you 75k USD for KGPE-D16, and didn't pay the 15k for KCMA-D8.

- -- 
Leah Rowe

Libreboot developer

Use free software. Free as in freedom.
https://en.wikipedia.org/wiki/Free_software

Use a free operating system, GNU+Linux.
https://libreboot.org/docs/distros/
Or BSD:
https://libreboot.org/docs/bsd/

Use a free BIOS.
https://libreboot.org/

Support computer user freedom.
https://peers.community/

Minifree Ltd, trading as Ministry of Freedom | Registered in England,
No. 9361826 | VAT No. GB202190462
Registered Office: 19 Hilton Road, Canvey Island, Essex SS8 9QA, UK |
Web: https://minifree.org/

-BEGIN PGP SIGNATURE-

iQEcBAEBCAAGBQJYggwWAAoJEP9Ft0z50c+UITsH/RlN6QX7NUdhGvHkkipN92Ob
EjlTjd88zfvMn+gXcEgrsOuf5ms4gpkJHEouelgXTQqn02slOcNSz736e50U/zsZ
Rn9OCten5Vmh87PHs19uSHNL8yvO4RPEPBT0pFJT+uAoCkhQ5GkE0Ci9hx7o0ljV
KDcwTswP+RBdzhG9C7eliBFlJm24UHw1njULbL8ojje9bokBT2BsmxETorMCxZfe
mJPT/z1dVi0sMSWywO8HTYdxzphUS2zn4CXysYazHOsTaXJwMlgQbHaE9NYTaAxQ
w9XEqP8rwZU0DxGKmsDhrGpsWdosUXbBNtwDmDX14PjtSdvXjkQ7ZvQo4ibnxZc=
=8+gr
-END PGP SIGNATURE-

-- 
coreboot mailing list: coreboot@coreboot.org
https://www.coreboot.org/mailman/listinfo/coreboot


Re: [coreboot] ASUS KCMA-D8 workstation board port offer

2017-01-19 Thread Merlin Büge
On Thu, 19 Jan 2017 20:51:53 -0600
Timothy Pearson  wrote:

> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
> 
> On 01/19/2017 08:48 PM, Merlin Büge wrote:
> >> But I have a problem with all that badmouthing of her I recently
> >> encountered, on this somewhat miscarried article on Phoronix [0],
> >> on
> >> #librecore, and #libreboot. I mean, I'm also annoyed of the GNU/FSF
> >> drama and so on, but that's no reason to personally offend her (no
> >> matter how subtle), or dragging libreboot through the mire.
> > 
> >> Note that this is no direct response to your initial mail. I just
> >> wanted to tell people, before they are reading stuff like the
> >> article linked above:
> 
> Fair enough.  I misinterpreted your intent, my apologies.
> 
>  So, before you make up your mind, also listen to the other side.
> > 
> > 
> >> How comes that not everyone can just play nice with each other..?
> > 
> >> That makes me sad.



> Same here.  Let's refocus on the project and leave this behind.  All
> that's really changed is that Raptor Engineering has effectively
> donated a complete port for the KCMA-D8 (CPU, RAM, and southbridge)
> to the project, as well as getting it upstreamed.  I think that's
> quite enough for the x86 side for a few years...time to work on
> POWER! ;-)



Thank you. =)


 
> - -- 
> Timothy Pearson
> Raptor Engineering
> +1 (415) 727-8645 (direct line)
> +1 (512) 690-0200 (switchboard)
> https://www.raptorengineering.com
> -BEGIN PGP SIGNATURE-
> Version: GnuPG v1
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
> 
> iQEcBAEBAgAGBQJYgXtGAAoJEK+E3vEXDOFbVh4IAL1eIM/CShSC/NFnjBYourxz
> i/95IdXw4l3hT7asgQSoH3MSR7pkIJLUnp/L0TiiFrY0h3SPiLKgJVX5RiCbxNug
> dnbwvkEmrXlQ5bih4Z4KGJa2b91wd2aoLtIr15+63hq2HWVGVzloWl1n8cx04DV9
> 7p7CIh0e13N9E6sYT93gCkbM25Q36uMt15ugMDti69KcMuOP3nJueb1PfTVfkBhj
> umlIiaVJ+qZjaBsELk3fm0J5V+xDxReKlhmace895IwSgXmX2f5myg5aA4rMphWm
> vjKNlG3AfuXOaW35GMHCZAupCEtAHgy9DjfpK8z7RAaXr+iobCFPiCD3+8bch1o=
> =CwCY
> -END PGP SIGNATURE-


-- 
Merlin Büge 

-- 
coreboot mailing list: coreboot@coreboot.org
https://www.coreboot.org/mailman/listinfo/coreboot


Re: [coreboot] ASUS KCMA-D8 workstation board port offer

2017-01-19 Thread Timothy Pearson
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

On 01/19/2017 08:48 PM, Merlin Büge wrote:
>> But I have a problem with all that badmouthing of her I recently
>> encountered, on this somewhat miscarried article on Phoronix [0], on
>> #librecore, and #libreboot. I mean, I'm also annoyed of the GNU/FSF
>> drama and so on, but that's no reason to personally offend her (no
>> matter how subtle), or dragging libreboot through the mire.
> 
>> Note that this is no direct response to your initial mail. I just
>> wanted to tell people, before they are reading stuff like the article
>> linked above:

Fair enough.  I misinterpreted your intent, my apologies.

 So, before you make up your mind, also listen to the other side.
> 
> 
>> How comes that not everyone can just play nice with each other..?
> 
>> That makes me sad.

Same here.  Let's refocus on the project and leave this behind.  All
that's really changed is that Raptor Engineering has effectively donated
a complete port for the KCMA-D8 (CPU, RAM, and southbridge) to the
project, as well as getting it upstreamed.  I think that's quite enough
for the x86 side for a few years...time to work on POWER! ;-)

- -- 
Timothy Pearson
Raptor Engineering
+1 (415) 727-8645 (direct line)
+1 (512) 690-0200 (switchboard)
https://www.raptorengineering.com
-BEGIN PGP SIGNATURE-
Version: GnuPG v1
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQEcBAEBAgAGBQJYgXtGAAoJEK+E3vEXDOFbVh4IAL1eIM/CShSC/NFnjBYourxz
i/95IdXw4l3hT7asgQSoH3MSR7pkIJLUnp/L0TiiFrY0h3SPiLKgJVX5RiCbxNug
dnbwvkEmrXlQ5bih4Z4KGJa2b91wd2aoLtIr15+63hq2HWVGVzloWl1n8cx04DV9
7p7CIh0e13N9E6sYT93gCkbM25Q36uMt15ugMDti69KcMuOP3nJueb1PfTVfkBhj
umlIiaVJ+qZjaBsELk3fm0J5V+xDxReKlhmace895IwSgXmX2f5myg5aA4rMphWm
vjKNlG3AfuXOaW35GMHCZAupCEtAHgy9DjfpK8z7RAaXr+iobCFPiCD3+8bch1o=
=CwCY
-END PGP SIGNATURE-

-- 
coreboot mailing list: coreboot@coreboot.org
https://www.coreboot.org/mailman/listinfo/coreboot


Re: [coreboot] ASUS KCMA-D8 workstation board port offer

2017-01-19 Thread Merlin Büge
On Thu, 19 Jan 2017 19:38:34 -0600
Timothy Pearson  wrote:

> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
> 
> On 01/19/2017 07:15 PM, Merlin Büge wrote:
> > On Thu, 19 Jan 2017 11:58:03 -0600
> > Timothy Pearson  wrote:
> > 
> > 
> > 
> >> Sorry to revive an old thread, but as many of you are aware
> >> Minifree (Leah Rowe) contracted with us to port the KCMA-D8 and
> >> release it.  We performed this work and the KCMA-D8 continues to
> >> operate, however Minifree has decided not to pay their contract on
> >> this work.  We strongly recommend that no person do any business
> >> with Minifree or its founder Leah Rowe, as they do not honor their
> >> legally binding contracts.
> > 
> > 
> > I see that my mail does belong to this list as little as this ^
> > 
> > However, I just want to remind you folks that there's always two
> > sides to a story. I've seen a lot of badmouthing of Leah,
> > especially the last few hours in IRC etc... questionable, to say
> > the least.
> > 
> > So, before you make up your mind, also listen to the other side.
> > 
> > 
> > Thanks,
> > 
> >  Merlin
> 
> Since you state that the criticism is questionable, can you please
> indicate where you disagree with said criticism?  As you say there are
> two sides to any story, and I have not presented a clear picture of
> our side for the sake of brevity and not wanting to drag the list
> along for the ride.

I feel quite uncomfortable discussing this here, not because it's
public, but because it's rather off-topic. Also I don't want to quote
freenode logs here.

I have no problem with (fair) criticism of how Leah is driving the
libreboot project, and that she still did not pay for the KCMA-D8 port
is clearly morally questionable.

But I have a problem with all that badmouthing of her I recently
encountered, on this somewhat miscarried article on Phoronix [0], on
#librecore, and #libreboot. I mean, I'm also annoyed of the GNU/FSF
drama and so on, but that's no reason to personally offend her (no
matter how subtle), or dragging libreboot through the mire.

Note that this is no direct response to your initial mail. I just
wanted to tell people, before they are reading stuff like the article
linked above:

> > So, before you make up your mind, also listen to the other side.


How comes that not everyone can just play nice with each other..?

That makes me sad.


 Merlin



[0]
https://www.phoronix.com/scan.php?page=news_item=Librecore-Formation






> 
> It comes down to a simple contract non-payment; no dissatisfaction
> with our work was registered until today when I was informed that the
> KCMA-D8 contract would not be paid.  These contracts were originally
> signed back in 2015 and the goal was to make all of these systems
> available for sale to the community; functional sources were given to
> Rowe early 2016 but sadly Minifree did not list them for sale until
> late 2016.  By that time the market had shifted further and,
> partially due to the ongoing controversy regarding Libreboot and the
> FSF, we observed a very public refusal to support Minifree further.
> Instead of honoring the debt incurred as part of this business
> opportunity, Rowe simply decided to walk away from it.
> 
> Rowe also does not have the knowledge or authority required to comment
> on our internal development processes regarding the KCMA-D8, including
> time taken, effort expended, and overall cost.  The KCMA-D8 is not a
> trivial port in the sense of, for instance, the T400 to T500
> conversion; a quick glance at the coreboot GIT repository, noting the
> logs referring to the C32 socket (the socket used on the KCMA-D8),
> will indicate that there was DDR3 initialization work required to get
> the KCMA-D8 operational and stabilized, in addition to handling the
> new layout and modified components of the mainboard itself.  Our
> quote was fully in line with industry standards for the type of work
> performed.
> 
> I don't want to go into further detail on this list; this is our side
> and really all you need to know.
> 
> - -- 
> Timothy Pearson
> Raptor Engineering
> +1 (415) 727-8645 (direct line)
> +1 (512) 690-0200 (switchboard)
> https://www.raptorengineering.com
> -BEGIN PGP SIGNATURE-
> Version: GnuPG v1
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
> 
> iQEcBAEBAgAGBQJYgWoYAAoJEK+E3vEXDOFbibsH/03TbzMfvxZtDh1xDwAZ5oTR
> JEl7pU+ooyQb20yIl7IzokBt8ew2Ch2PDEQY3D7h2CE7tS/Wzpqv5U1D4GRHMviI
> ieZjIgh/FjjMP8XOR+DJLvmMg2/mQUyvnc90kQd1tJ8z7sBd5sb7Z06w3aOQEPwP
> CaXchg2gow6+Jkm69KfG3c3BJfpTyFCtaOW4d1mQKSWrGlIUNHwUqnXgq5rWjjND
> 1qTr/oA6vCiBSnUDd9fZg+4sLW3u/KtiAfNaIPmP9u/mu8/nbw2zPtillrkIYbeA
> XvR4nuWlRNgouycnZKReTRPusSkq5y/00sxAK6soEZmap0KS4l4syjEMZDOgoJA=
> =uAu9
> -END PGP SIGNATURE-


-- 
Merlin Büge 

-- 
coreboot mailing list: coreboot@coreboot.org
https://www.coreboot.org/mailman/listinfo/coreboot


Re: [coreboot] ASUS KCMA-D8 workstation board port offer

2017-01-19 Thread Timothy Pearson
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

On 01/19/2017 07:15 PM, Merlin Büge wrote:
> On Thu, 19 Jan 2017 11:58:03 -0600
> Timothy Pearson  wrote:
> 
> 
> 
>> Sorry to revive an old thread, but as many of you are aware Minifree
>> (Leah Rowe) contracted with us to port the KCMA-D8 and release it.  We
>> performed this work and the KCMA-D8 continues to operate, however
>> Minifree has decided not to pay their contract on this work.  We
>> strongly recommend that no person do any business with Minifree or its
>> founder Leah Rowe, as they do not honor their legally binding
>> contracts.
> 
> 
> I see that my mail does belong to this list as little as this ^
> 
> However, I just want to remind you folks that there's always two sides
> to a story. I've seen a lot of badmouthing of Leah, especially the
> last few hours in IRC etc... questionable, to say the least.
> 
> So, before you make up your mind, also listen to the other side.
> 
> 
> Thanks,
> 
>  Merlin

Since you state that the criticism is questionable, can you please
indicate where you disagree with said criticism?  As you say there are
two sides to any story, and I have not presented a clear picture of our
side for the sake of brevity and not wanting to drag the list along for
the ride.

It comes down to a simple contract non-payment; no dissatisfaction with
our work was registered until today when I was informed that the KCMA-D8
contract would not be paid.  These contracts were originally signed back
in 2015 and the goal was to make all of these systems available for sale
to the community; functional sources were given to Rowe early 2016 but
sadly Minifree did not list them for sale until late 2016.  By that time
the market had shifted further and, partially due to the ongoing
controversy regarding Libreboot and the FSF, we observed a very public
refusal to support Minifree further.  Instead of honoring the debt
incurred as part of this business opportunity, Rowe simply decided to
walk away from it.

Rowe also does not have the knowledge or authority required to comment
on our internal development processes regarding the KCMA-D8, including
time taken, effort expended, and overall cost.  The KCMA-D8 is not a
trivial port in the sense of, for instance, the T400 to T500 conversion;
a quick glance at the coreboot GIT repository, noting the logs referring
to the C32 socket (the socket used on the KCMA-D8), will indicate that
there was DDR3 initialization work required to get the KCMA-D8
operational and stabilized, in addition to handling the new layout and
modified components of the mainboard itself.  Our quote was fully in
line with industry standards for the type of work performed.

I don't want to go into further detail on this list; this is our side
and really all you need to know.

- -- 
Timothy Pearson
Raptor Engineering
+1 (415) 727-8645 (direct line)
+1 (512) 690-0200 (switchboard)
https://www.raptorengineering.com
-BEGIN PGP SIGNATURE-
Version: GnuPG v1
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQEcBAEBAgAGBQJYgWoYAAoJEK+E3vEXDOFbibsH/03TbzMfvxZtDh1xDwAZ5oTR
JEl7pU+ooyQb20yIl7IzokBt8ew2Ch2PDEQY3D7h2CE7tS/Wzpqv5U1D4GRHMviI
ieZjIgh/FjjMP8XOR+DJLvmMg2/mQUyvnc90kQd1tJ8z7sBd5sb7Z06w3aOQEPwP
CaXchg2gow6+Jkm69KfG3c3BJfpTyFCtaOW4d1mQKSWrGlIUNHwUqnXgq5rWjjND
1qTr/oA6vCiBSnUDd9fZg+4sLW3u/KtiAfNaIPmP9u/mu8/nbw2zPtillrkIYbeA
XvR4nuWlRNgouycnZKReTRPusSkq5y/00sxAK6soEZmap0KS4l4syjEMZDOgoJA=
=uAu9
-END PGP SIGNATURE-

-- 
coreboot mailing list: coreboot@coreboot.org
https://www.coreboot.org/mailman/listinfo/coreboot


Re: [coreboot] ASUS KCMA-D8 workstation board port offer

2017-01-19 Thread Merlin Büge
On Thu, 19 Jan 2017 11:58:03 -0600
Timothy Pearson  wrote:



> Sorry to revive an old thread, but as many of you are aware Minifree
> (Leah Rowe) contracted with us to port the KCMA-D8 and release it.  We
> performed this work and the KCMA-D8 continues to operate, however
> Minifree has decided not to pay their contract on this work.  We
> strongly recommend that no person do any business with Minifree or its
> founder Leah Rowe, as they do not honor their legally binding
> contracts.


I see that my mail does belong to this list as little as this ^

However, I just want to remind you folks that there's always two sides
to a story. I've seen a lot of badmouthing of Leah, especially the
last few hours in IRC etc... questionable, to say the least.

So, before you make up your mind, also listen to the other side.


Thanks,

 Merlin





> - -- 
> Timothy Pearson
> Raptor Engineering
> +1 (415) 727-8645 (direct line)
> +1 (512) 690-0200 (switchboard)
> https://www.raptorengineering.com
> -BEGIN PGP SIGNATURE-
> Version: GnuPG v1
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
> 
> iQEcBAEBAgAGBQJYgP4nAAoJEK+E3vEXDOFbIv4H/2LVc83j2TvIDXW5owce6X94
> SUwbyLhAlAyrqSmrOwwmaam+w85APVSW8+fZWXsNW76yWnuHsYirr5va5XWUTkDm
> egPZDnWz1W/mg35GTcnQe2aQNZpQ6Q7VX5WiVgBHxtmfRbu/mswQyP3LAqO7vIhh
> pheQdSUyRoYomqMkhx7o3t2EtDti4oR3L3AqykvxhuszFhkQNrtRj4vFyLBy3j6/
> io5xeE3QKObSvC2waVkGq3cJzOGzfgtZb3Nwqrt6NZl4Cz5GMQM5MBV4jx4gGcO5
> rzRFbXZm/zOdICOc4c45n5B4P/kUz/AmkB6hVEgJjQHQS+p93sZ5xLVJlzqdDRk=
> =RcgR
> -END PGP SIGNATURE-
> 
> -- 
> coreboot mailing list: coreboot@coreboot.org
> https://www.coreboot.org/mailman/listinfo/coreboot


-- 
Merlin Büge 

-- 
coreboot mailing list: coreboot@coreboot.org
https://www.coreboot.org/mailman/listinfo/coreboot


Re: [coreboot] ASUS KCMA-D8 workstation board port offer

2017-01-19 Thread Timothy Pearson
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

On 01/19/2017 05:55 PM, taii...@gmx.com wrote:
> On 01/19/2017 06:51 PM, Timothy Pearson wrote:
> 
> On 01/19/2017 05:41 PM, taii...@gmx.com wrote:
 On 01/19/2017 12:58 PM, Timothy Pearson wrote:

 On 11/10/2015 10:40 PM, Alex G. wrote:
>>> This is something I'd be interested in: Making a 501(c)
>>> (tax-deductible)
>>> contribution towards this goal. Is there a way to make this
>>> happen? Can
>>> the FSF get involved in this somehow? (they have 501(c)(3) status).
>>>
>>> Alex
 Sorry to revive an old thread, but as many of you are aware Minifree
 (Leah Rowe) contracted with us to port the KCMA-D8 and release it.  We
 performed this work and the KCMA-D8 continues to operate, however
 Minifree has decided not to pay their contract on this work.  We
 strongly recommend that no person do any business with Minifree or its
 founder Leah Rowe, as they do not honor their legally binding contracts.

 -- Timothy Pearson
 Raptor Engineering
 +1 (415) 727-8645 (direct line)
 +1 (512) 690-0200 (switchboard)
 https://www.raptorengineering.com
 That is sad, I guess she really went off the deep end what an awful
 thing to screw you guys over like that
 I despise customers that don't payafter being burned a few times I
 now always get money up front for any consulting work over $300
 This should be publicized more.
 They are the only retail vendor that sells ready to go libre coreboot
 computers I imagine a lot of people buy from them...
> We are offering at least the desktop, workstation, and server variants
> now:
> 
> https://www.raptorengineering.com/content/base/news/19.01.2017
> 
> Those proceeds do go to development of libre systems, so perhaps at
> least US customers can now purchase straight from the development vendor
> (Raptor) instead of a third party.  I don't expect much uptake but it is
> an option at least, and we do bring experience on the server side that
> was not present with the other vendor.
> 
> -- Timothy Pearson
> Raptor Engineering
> +1 (415) 727-8645 (direct line)
> +1 (512) 690-0200 (switchboard)
> https://www.raptorengineering.com
>>
> Nice.
> It might be prudent to create a web-store where people can purchase via
> credit card etc, a lot of people are incredibly lazy slash antisocial
> and don't wish to call for a quote.

Yeah, this was just a quick announcement for the server end mostly.  It
will take a couple of days to get the product pages up for the desktop /
workstation "generic" systems.

- -- 
Timothy Pearson
Raptor Engineering
+1 (415) 727-8645 (direct line)
+1 (512) 690-0200 (switchboard)
https://www.raptorengineering.com
-BEGIN PGP SIGNATURE-
Version: GnuPG v1
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQEcBAEBAgAGBQJYgVPQAAoJEK+E3vEXDOFbdeAH+wfwlUrb9GLMpmGA01MGXBL2
z8MMq5T3MAA7ZWyyXsMpCzAWSacgEKlyUf1jiUHVs3QClTdug1z6Phmtvfy5+/Mc
4JlHa8tzVOe+pZIDmJE8WqWoKxhey+u65PXYAYL5P2wqBAu5IxAhdRqHWceEFwkh
K/VE2VnFjXcbTdCPIWxD7hRUyX6BMOwwvjxRPiPB6LWJVBqHP/3+D6X7LSiqeuyP
VYCIImycuw4I2+aOuU3Tg4d5ddWuPDjUYJ/fjq0VKOFtgZWquOKDlXoSAy28Fabc
hZoxvb53PGYXQHH7vbl/tFVrYlpLKlWQ70Fmt3vxt+LRsYUIgXVuQcGBfS5Jf0o=
=E9lb
-END PGP SIGNATURE-

-- 
coreboot mailing list: coreboot@coreboot.org
https://www.coreboot.org/mailman/listinfo/coreboot


Re: [coreboot] ASUS KCMA-D8 workstation board port offer

2017-01-19 Thread taii...@gmx.com

On 01/19/2017 06:51 PM, Timothy Pearson wrote:


-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

On 01/19/2017 05:41 PM, taii...@gmx.com wrote:

On 01/19/2017 12:58 PM, Timothy Pearson wrote:

On 11/10/2015 10:40 PM, Alex G. wrote:

This is something I'd be interested in: Making a 501(c) (tax-deductible)
contribution towards this goal. Is there a way to make this happen? Can
the FSF get involved in this somehow? (they have 501(c)(3) status).

Alex

Sorry to revive an old thread, but as many of you are aware Minifree
(Leah Rowe) contracted with us to port the KCMA-D8 and release it.  We
performed this work and the KCMA-D8 continues to operate, however
Minifree has decided not to pay their contract on this work.  We
strongly recommend that no person do any business with Minifree or its
founder Leah Rowe, as they do not honor their legally binding contracts.

-- Timothy Pearson
Raptor Engineering
+1 (415) 727-8645 (direct line)
+1 (512) 690-0200 (switchboard)
https://www.raptorengineering.com
That is sad, I guess she really went off the deep end what an awful
thing to screw you guys over like that
I despise customers that don't payafter being burned a few times I
now always get money up front for any consulting work over $300
This should be publicized more.
They are the only retail vendor that sells ready to go libre coreboot
computers I imagine a lot of people buy from them...

We are offering at least the desktop, workstation, and server variants now:

https://www.raptorengineering.com/content/base/news/19.01.2017

Those proceeds do go to development of libre systems, so perhaps at
least US customers can now purchase straight from the development vendor
(Raptor) instead of a third party.  I don't expect much uptake but it is
an option at least, and we do bring experience on the server side that
was not present with the other vendor.

- -- 
Timothy Pearson

Raptor Engineering
+1 (415) 727-8645 (direct line)
+1 (512) 690-0200 (switchboard)
https://www.raptorengineering.com
-BEGIN PGP SIGNATURE-
Version: GnuPG v1
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQEcBAEBAgAGBQJYgVEVAAoJEK+E3vEXDOFbnv0H/A0uZotgAmPQ1vB8+lIsYADo
vxAAYO0Gf5lrw5Qi4bhaEHSM3Pd+//sJgg/EfrbdqQCMd3NesxRUpIRHhv+B4B11
Tk+d/spjkc2BUxfRsE43LYfLaVYnVWaVCI7Y2hVtnTnxJ7QlnoZqx1fkoL85rVRW
zPFJzAbh6W+S9RCkjayWx3JCLCa3A0gxs6NWtKOeC+GFHo8zJ8gOo+672401zU75
aCXM9SUcekLXIjbxmmsrwxe36il0RaqtfkHCOBXyoAha8Ocg+KHEr7iv52tR6xag
Fp7Fy0A5SxowS8BhNnQJ15bNRRQuWrAYgDN0jzK4lwFw2D5F2lWbjofT/shkp0Q=
=kTPH
-END PGP SIGNATURE-


Nice.
It might be prudent to create a web-store where people can purchase via 
credit card etc, a lot of people are incredibly lazy slash antisocial 
and don't wish to call for a quote.


--
coreboot mailing list: coreboot@coreboot.org
https://www.coreboot.org/mailman/listinfo/coreboot


Re: [coreboot] ASUS KCMA-D8 workstation board port offer

2017-01-19 Thread Timothy Pearson
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

On 01/19/2017 05:41 PM, taii...@gmx.com wrote:
> On 01/19/2017 12:58 PM, Timothy Pearson wrote:
> 
> On 11/10/2015 10:40 PM, Alex G. wrote:
 This is something I'd be interested in: Making a 501(c) (tax-deductible)
 contribution towards this goal. Is there a way to make this happen? Can
 the FSF get involved in this somehow? (they have 501(c)(3) status).

 Alex
> Sorry to revive an old thread, but as many of you are aware Minifree
> (Leah Rowe) contracted with us to port the KCMA-D8 and release it.  We
> performed this work and the KCMA-D8 continues to operate, however
> Minifree has decided not to pay their contract on this work.  We
> strongly recommend that no person do any business with Minifree or its
> founder Leah Rowe, as they do not honor their legally binding contracts.
> 
> -- Timothy Pearson
> Raptor Engineering
> +1 (415) 727-8645 (direct line)
> +1 (512) 690-0200 (switchboard)
> https://www.raptorengineering.com
>>
> That is sad, I guess she really went off the deep end what an awful
> thing to screw you guys over like that
> I despise customers that don't payafter being burned a few times I
> now always get money up front for any consulting work over $300

> This should be publicized more.
> They are the only retail vendor that sells ready to go libre coreboot
> computers I imagine a lot of people buy from them...

We are offering at least the desktop, workstation, and server variants now:

https://www.raptorengineering.com/content/base/news/19.01.2017

Those proceeds do go to development of libre systems, so perhaps at
least US customers can now purchase straight from the development vendor
(Raptor) instead of a third party.  I don't expect much uptake but it is
an option at least, and we do bring experience on the server side that
was not present with the other vendor.

- -- 
Timothy Pearson
Raptor Engineering
+1 (415) 727-8645 (direct line)
+1 (512) 690-0200 (switchboard)
https://www.raptorengineering.com
-BEGIN PGP SIGNATURE-
Version: GnuPG v1
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQEcBAEBAgAGBQJYgVEVAAoJEK+E3vEXDOFbnv0H/A0uZotgAmPQ1vB8+lIsYADo
vxAAYO0Gf5lrw5Qi4bhaEHSM3Pd+//sJgg/EfrbdqQCMd3NesxRUpIRHhv+B4B11
Tk+d/spjkc2BUxfRsE43LYfLaVYnVWaVCI7Y2hVtnTnxJ7QlnoZqx1fkoL85rVRW
zPFJzAbh6W+S9RCkjayWx3JCLCa3A0gxs6NWtKOeC+GFHo8zJ8gOo+672401zU75
aCXM9SUcekLXIjbxmmsrwxe36il0RaqtfkHCOBXyoAha8Ocg+KHEr7iv52tR6xag
Fp7Fy0A5SxowS8BhNnQJ15bNRRQuWrAYgDN0jzK4lwFw2D5F2lWbjofT/shkp0Q=
=kTPH
-END PGP SIGNATURE-

-- 
coreboot mailing list: coreboot@coreboot.org
https://www.coreboot.org/mailman/listinfo/coreboot


Re: [coreboot] ASUS KCMA-D8 workstation board port offer

2017-01-19 Thread taii...@gmx.com

On 01/19/2017 12:58 PM, Timothy Pearson wrote:


-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

On 11/10/2015 10:40 PM, Alex G. wrote:

This is something I'd be interested in: Making a 501(c) (tax-deductible)
contribution towards this goal. Is there a way to make this happen? Can
the FSF get involved in this somehow? (they have 501(c)(3) status).

Alex

Sorry to revive an old thread, but as many of you are aware Minifree
(Leah Rowe) contracted with us to port the KCMA-D8 and release it.  We
performed this work and the KCMA-D8 continues to operate, however
Minifree has decided not to pay their contract on this work.  We
strongly recommend that no person do any business with Minifree or its
founder Leah Rowe, as they do not honor their legally binding contracts.

- -- 
Timothy Pearson

Raptor Engineering
+1 (415) 727-8645 (direct line)
+1 (512) 690-0200 (switchboard)
https://www.raptorengineering.com
-BEGIN PGP SIGNATURE-
Version: GnuPG v1
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQEcBAEBAgAGBQJYgP4nAAoJEK+E3vEXDOFbIv4H/2LVc83j2TvIDXW5owce6X94
SUwbyLhAlAyrqSmrOwwmaam+w85APVSW8+fZWXsNW76yWnuHsYirr5va5XWUTkDm
egPZDnWz1W/mg35GTcnQe2aQNZpQ6Q7VX5WiVgBHxtmfRbu/mswQyP3LAqO7vIhh
pheQdSUyRoYomqMkhx7o3t2EtDti4oR3L3AqykvxhuszFhkQNrtRj4vFyLBy3j6/
io5xeE3QKObSvC2waVkGq3cJzOGzfgtZb3Nwqrt6NZl4Cz5GMQM5MBV4jx4gGcO5
rzRFbXZm/zOdICOc4c45n5B4P/kUz/AmkB6hVEgJjQHQS+p93sZ5xLVJlzqdDRk=
=RcgR
-END PGP SIGNATURE-

That is sad, I guess she really went off the deep end what an awful 
thing to screw you guys over like that
I despise customers that don't payafter being burned a few times I 
now always get money up front for any consulting work over $300


This should be publicized more.
They are the only retail vendor that sells ready to go libre coreboot 
computers I imagine a lot of people buy from them...


--
coreboot mailing list: coreboot@coreboot.org
https://www.coreboot.org/mailman/listinfo/coreboot


Re: [coreboot] ASUS KCMA-D8 workstation board port offer

2017-01-19 Thread Timothy Pearson
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

On 11/10/2015 10:40 PM, Alex G. wrote:
> This is something I'd be interested in: Making a 501(c) (tax-deductible)
> contribution towards this goal. Is there a way to make this happen? Can
> the FSF get involved in this somehow? (they have 501(c)(3) status).
> 
> Alex

Sorry to revive an old thread, but as many of you are aware Minifree
(Leah Rowe) contracted with us to port the KCMA-D8 and release it.  We
performed this work and the KCMA-D8 continues to operate, however
Minifree has decided not to pay their contract on this work.  We
strongly recommend that no person do any business with Minifree or its
founder Leah Rowe, as they do not honor their legally binding contracts.

- -- 
Timothy Pearson
Raptor Engineering
+1 (415) 727-8645 (direct line)
+1 (512) 690-0200 (switchboard)
https://www.raptorengineering.com
-BEGIN PGP SIGNATURE-
Version: GnuPG v1
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQEcBAEBAgAGBQJYgP4nAAoJEK+E3vEXDOFbIv4H/2LVc83j2TvIDXW5owce6X94
SUwbyLhAlAyrqSmrOwwmaam+w85APVSW8+fZWXsNW76yWnuHsYirr5va5XWUTkDm
egPZDnWz1W/mg35GTcnQe2aQNZpQ6Q7VX5WiVgBHxtmfRbu/mswQyP3LAqO7vIhh
pheQdSUyRoYomqMkhx7o3t2EtDti4oR3L3AqykvxhuszFhkQNrtRj4vFyLBy3j6/
io5xeE3QKObSvC2waVkGq3cJzOGzfgtZb3Nwqrt6NZl4Cz5GMQM5MBV4jx4gGcO5
rzRFbXZm/zOdICOc4c45n5B4P/kUz/AmkB6hVEgJjQHQS+p93sZ5xLVJlzqdDRk=
=RcgR
-END PGP SIGNATURE-

-- 
coreboot mailing list: coreboot@coreboot.org
https://www.coreboot.org/mailman/listinfo/coreboot


Re: [coreboot] ASUS KCMA-D8 workstation board port offer

2015-11-10 Thread Alex G.
This is something I'd be interested in: Making a 501(c) (tax-deductible)
contribution towards this goal. Is there a way to make this happen? Can
the FSF get involved in this somehow? (they have 501(c)(3) status).

Alex

On 11/09/2015 07:50 PM, Francis Rowe wrote:
> 
> 
> On 09/11/15 21:44, Timothy Pearson wrote:
>> All,
> 
>> After reviewing some of the comments on the ASUS KGPE-D16 being 
>> essentially too large of a system and too expensive for many
>> people, and the fact that modern, blob-free systems are not really
>> available in the mid-range arena, Raptor Engineering would like to
>> offer to create a native initalization blob-free port for the ASUS
>> KCMA-D8, which is essentially the KGPE-D16's ATX-compatible "little
>> brother".
> 
>> We would be asking $15,000 for the port, including upstreaming to
>> the master coreboot tree.  We already have extensive experience
>> with these Family 10h/15h boards, and would be able to create a
>> port of similar quality to the existing KGPE-D16 source in terms of
>> both code quality and overall functionality.
> 
>> If this is something you might be interested in please let me know.
>> We are able to accept multiple payments from various sources for
>> the same project (within limits), so if this is something your
>> local Linux groups or similar might be interested in we should be
>> able to keep the cost on any one individual or organization to a
>> reasonable level.
> 
>> Thank you for your consideration,
> 
> 
> 
> To be clear, Timothy is trying to gauge potential interest in a
> collective crowd funding source, between interested parties within the
> coreboot project.
> 
> 

-- 
coreboot mailing list: coreboot@coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot


[coreboot] ASUS KCMA-D8 workstation board port offer

2015-11-09 Thread Timothy Pearson
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

All,

After reviewing some of the comments on the ASUS KGPE-D16 being
essentially too large of a system and too expensive for many people, and
the fact that modern, blob-free systems are not really available in the
mid-range arena, Raptor Engineering would like to offer to create a
native initalization blob-free port for the ASUS KCMA-D8, which is
essentially the KGPE-D16's ATX-compatible "little brother".

We would be asking $15,000 for the port, including upstreaming to the
master coreboot tree.  We already have extensive experience with these
Family 10h/15h boards, and would be able to create a port of similar
quality to the existing KGPE-D16 source in terms of both code quality
and overall functionality.

If this is something you might be interested in please let me know.  We
are able to accept multiple payments from various sources for the same
project (within limits), so if this is something your local Linux groups
or similar might be interested in we should be able to keep the cost on
any one individual or organization to a reasonable level.

Thank you for your consideration,

- -- 
Timothy Pearson
Raptor Engineering
+1 (415) 727-8645 (direct line)
+1 (512) 690-0200 (switchboard)
http://www.raptorengineeringinc.com
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQEcBAEBAgAGBQJWQROpAAoJEK+E3vEXDOFbR2cH/3FTqGFH+cU/HVrBUPcoKjii
h9OC7SGeXdyoLZvob/YayG+g47Yppkg2um4pAC7dmGl/OXtkGh13hlsrQ8BNiYcz
g0kQUdNKYh9dmBC3YnlxU6a7psh473TdyuLILrl7/8WgI8DZnRtjy62Oo5k6XAKW
jfYb/bGC8I3tArYrgQDmFxz2dOejuTZit56I+mbWNtvbuQov2BDmrPPMLRuEvG3M
QHCAo/Pjaajzl4rmtrgu0GHcxHsgAnJcnrcPkFYeSDKt7QxSTNOB6NqhcnYdh1SY
RiA5Z/3enuDs+XNhS+6qMeKOcrEuf+Ccs7sGsgq5tWm20JA+bBoByvrXhHqVUxU=
=DKfR
-END PGP SIGNATURE-

-- 
coreboot mailing list: coreboot@coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot


Re: [coreboot] ASUS KCMA-D8 workstation board port offer

2015-11-09 Thread Francis Rowe
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1



On 09/11/15 21:44, Timothy Pearson wrote:
> All,
> 
> After reviewing some of the comments on the ASUS KGPE-D16 being 
> essentially too large of a system and too expensive for many
> people, and the fact that modern, blob-free systems are not really
> available in the mid-range arena, Raptor Engineering would like to
> offer to create a native initalization blob-free port for the ASUS
> KCMA-D8, which is essentially the KGPE-D16's ATX-compatible "little
> brother".
> 
> We would be asking $15,000 for the port, including upstreaming to
> the master coreboot tree.  We already have extensive experience
> with these Family 10h/15h boards, and would be able to create a
> port of similar quality to the existing KGPE-D16 source in terms of
> both code quality and overall functionality.
> 
> If this is something you might be interested in please let me know.
> We are able to accept multiple payments from various sources for
> the same project (within limits), so if this is something your
> local Linux groups or similar might be interested in we should be
> able to keep the cost on any one individual or organization to a
> reasonable level.
> 
> Thank you for your consideration,
> 
> 

To be clear, Timothy is trying to gauge potential interest in a
collective crowd funding source, between interested parties within the
coreboot project.

-BEGIN PGP SIGNATURE-
Version: GnuPG v1

iQEcBAEBAgAGBQJWQWmAAAoJEP9Ft0z50c+UwsAIAK4KOWHaUNVnm0GDIE/U1a8z
FldJ/uXCvrb+BpLaQgE7FReDeJnawwxcBypo16qaq2pC3kKfawV0baOWBkQXhbau
gvO7kye7KvTIGguGPokyGuLdXp0ZwDJUnQgI34gn2cynDR53uOwwzdxi5qNdshJu
DK2f/c713AP1APqE8pnlFYFgenZMXeOCoq+Oz7gBFv28AzAEC7FqiX+dKhQes1wM
cov3alODt8IZsXIrt0A9T5Zpy1STu0zju38A9pzMaKsuaGBLAIb69fduZgOZjh7K
SR0+WaXYOouflEJA/BG7LHC2i9PqQjCfLiVv1r5A8Ef0rpHnJQpjC6gT27/j/nk=
=yNCo
-END PGP SIGNATURE-

-- 
coreboot mailing list: coreboot@coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot