Hello,
I did a quick google yesterday but the only answer was to reconfigure
and recompile the application?!?
Regards
Mirko
---
SF email is sponsored by - The IT Product Guide
Read honest candid reviews on hundreds of IT Products from real
Chris Petersen said the following on 11/03/2004 05:55 AM:
I currently have a mailfilter rule that copies certain incoming
messages to an archive maildir. These come in marked as new
messages, so I'm wondering if there is a way via the mailfilter to
mark them as read so they don't trigger
Jonas Meurer said the following on 05/13/2004 09:11 PM:
hello,
How can i configure courier mta to use procmail as mda if ~/.procmailrc
exists? At the moment I have in /etc/courier/courierd:
DEFAULTDELIVERY=./Maildir
What I like courier to do, is to check for ~/.procmailrc, if existent
run procmail
John Saunders said the following on 03/17/2004 06:02 AM:
The last remaining issue is that courierdeliver
is storing messages in mbox format in a file called
$HOME/Maildir. From the source I found out that if
the maildir doesn't exist the code path causes it to
deliver in mbox format to the
Mitch (WebCob) said the following on 01/08/2004 01:37 AM:
Ok - thanks - that works better for a number of reasons - (I'll post the
running verison once I play with it) - by making sure I am testing the first
header, I don't need to care about example.com (which is good, cause then I
can put the
On Sun, Dec 21, 2003 at 09:18:39PM -0500, Eric Livingston wrote:
Simple question, but one I can't seem to find a direct answer to:
How do you send a message into the abyss using .mailfilter rules? I use
SpamAssassin, and would like to auto-delete messages with scores over a
certain
Alan Milligan said the following on 12/12/2003 10:08 PM:
I've had quite an extensive grovel around gmane.org and still can't
quite find a posting answering the following:
I'm using maildrop's xfilter command to invoke spamc for a group of both
virtual and non-virtual mail accounts.
In each case, I
On Mon, Dec 08, 2003 at 09:29:12AM -0800, Gordon Messmer wrote:
Mirko Zeibig wrote:
Using SMTP was no problem but sending email via mutt (using sendmail)
ended in
permission problems, so I uninstalled the python-filters again.
Are you also on a Debian system?
Nope, I tried the filters
On Fri, Dec 05, 2003 at 12:53:31PM +0100, Jose M. Rus wrote:
I installed Courier 0.44.2, everything works fine except webmail. When I
send I new message with sqwebmail I receive the following error:
sendmail: ERR: Permission denied
400 Unable to submit message - service temporarily
On Sun, Dec 07, 2003 at 10:56:53PM -0500, Sam Varshavchik wrote:
Julian Mehnle writes:
Sam Varshavchik [EMAIL PROTECTED] wrote:
Correct. Here's what you missed:
# ls -l /usr/lib/courier/bin/sendmail
-r-s--x--x1 root daemon 140239 Nov 28 21:01
[EMAIL PROTECTED] wrote:
On
On Thu, Dec 04, 2003 at 09:18:00PM +0100, [EMAIL PROTECTED] wrote:
Also we don´t want to use any kind of secret address or any
security by obscurity model for the allowed posting addresses.
The trick will be to creat a .courier file in the mailinglist account
home directory (right?) which
On Wed, Nov 26, 2003 at 07:52:17AM -0800, Mitch (WebCob) wrote:
Not meaning to answer for Troy, but I don't think anything is Wrong with
this, but it doesn't do what Troy is doing...
He's using localmailfilter as a recpt filter on mail acceptance - he runs
spamassassin on acceptance (i.e.
Hello,
I using rpm and the spec-file contains the line make check, which will break
the built of rpms if there already are definitions for shared folders in
/etc/courier-imap/maildirshared.
Best Regards
Mirko
---
This SF.net email is
[Troy and Mitch were discussing usage of maildroprcs and .mailfilter with includes
maildroprcs ...]
Pardon me, what's wrong using just a /etc/courier/maildroprc like this:
--- snip ---
[EMAIL PROTECTED] mirko]$ cat /etc/courier/maildroprc
import SENDER
import RECIPIENT
import HOME
import USER
On Sun, Nov 02, 2003 at 12:28:01PM -0500, Sam Varshavchik wrote:
Download: http://www.courier-mta.org/download.php
This is an update to the webmail server.
Changes:
* New, professionally designed icons. Additional navigation buttons.
* sqwebmaild is now a daemon process, that
Hello MrSam,
off-topic descripton=a bit
first of all let me tell that I really like the work you have done, I've been
using courier-imap with qmail/postfix for about 3 years now on different
servers and have chosen the complete courier suite for another server a year
ago and am very happy about
On Fri, Oct 10, 2003 at 10:37:25AM +0100, Miguel Cabeça wrote:
I think you didn't understand what I wrote.
Let me make a drawing:
ClientServer
--- imap --- imapd with STLS (xxx.xxx.xxx.xxx:143)--- mail
--- pop3 --- pop3d with STLS
On Thu, Oct 09, 2003 at 11:14:25AM +0200, Christophe Zwecker wrote:
Hi,
my courier mta seems to reject this mail because of the dot in the
emailaddress:
Oct 8 18:38:43 zer00 courieresmtpd:
error,relay=62.134.72.80,from=[EMAIL PROTECTED],to=[EMAIL PROTECTED]: 513
Syntax error.
Addresses
On Mon, Sep 29, 2003 at 06:22:56PM -0400, Sam Varshavchik wrote:
Courier User writes:
Assume that I have an email user on my system whose address is
[EMAIL PROTECTED] I know I can use .courier and .courier-default
in that user's HOME directory to control the delivery of email not
only to
On Fri, Jul 18, 2003 at 12:41:39PM +0200, Erwin Sterne wrote:
Firstly: I have a full virtual user setup. (ie /[EMAIL PROTECTED]/ is not the
same as /[EMAIL PROTECTED])/ With the Imap and Pop3 modules everything works
great. I specify [EMAIL PROTECTED] for the username and it works correctly.
On Wed, Jul 02, 2003 at 01:36:55PM +1000, Systems Administrator wrote:
On Tue, 1 Jul 2003, Sam Varshavchik wrote:
BobsKC writes:
« HTML content follows »
When I receive an email with an attachment I usually delete the attachment
and save the message to a folder. However, when I
On Wed, Jun 25, 2003 at 09:43:43PM -0700, Patrick Beart wrote:
attachment, with the following content:
-
CORRUPTED MESSAGE
This is the Courier Mail Server 0.40 on mailserver.iweb4biz.com.
-
I know that this is going to sound stupid (it
On Thu, Jun 26, 2003 at 12:49:58PM +0200, RABLAT Guillaume wrote:
hi,
Is there a way to rewrite envelope (the (Envelop-)To/Cc/Bcc header(s)) with
Courier-SMTP?
I received mail from @xxx.yy.com and I can just deliver for @xxx.com. How to
delete yy ?
well, with virtual domains this no
On Wed, Jun 18, 2003 at 12:20:34AM +1000, Mark Constable wrote:
When I use OE or mozilla to do smtp auth without using
SSL (from the client) I seem to be able to auth even
with crypted passwords in MySQL. However when the client
selects SSL in OE then they can't relay with a
... Server Error:
Hello,
I am running spamc from /etc/courier/maildroprc, having only virtual accounts
underneath /home/vmail/domain.com/username. Right now I only have one pref-file
for spamassassin in /home/vmail/.spamassassin/user_prefs, but I'd like to have
this on a per-virtual-user base.
I see I could
On Tue, 17 Jun 2003, Bowie Bailey wrote:
From: Mirko Zeibig [mailto:[EMAIL PROTECTED]
[SSIA]
I have almost this exact configuration running on my server. The
setup is a bit strange, but it works fine.
/etc/courier/maildroprc:
import RECIPIENT
LCRECIPIENT=tolower($RECIPIENT
James A Baker wrote:
On Saturday, Jun 14, 2003, at 18:54 US/Central, Sam Varshavchik wrote:
Mirko Zeibig writes:
On Fri, 13 Jun 2003, Sam Varshavchik wrote:
Mirko Zeibig writes:
On Thu, Jun 12, 2003 at 04:49:14PM -0400, Sam Varshavchik wrote:
Note that you better be using SSL to send mail
On Fri, 13 Jun 2003, Sam Varshavchik wrote:
Mirko Zeibig writes:
On Thu, Jun 12, 2003 at 04:49:14PM -0400, Sam Varshavchik wrote:
Note that you better be using SSL to send mail, otherwise without CRAM-MD5
your password is sent over the network, unencrypted.
How do I assure SSL
On Thu, Jun 12, 2003 at 04:49:14PM -0400, Sam Varshavchik wrote:
Mirko Zeibig writes:
Now I get this error on the server, if sending a mail to @picard.inka.de:
Jun 12 21:11:09 zeibig courieresmtpd:
error,relay=:::62.224.163.159,msg=535 Authentication failed.,cmd:
AUTH
CRAM-MD5
Do you
On Fri, Jun 13, 2003 at 01:04:07PM -0400, Sam Varshavchik wrote:
Mirko Zeibig writes:
Hm,
I did install:
cyrus-sasl-plain-2.1.10-1
cyrus-sasl-2.1.10-1
cyrus-sasl-md5-2.1.10-1
cyrus-sasl-devel-2.1.10-1
That's nice, except that Courier does not use Cyrus-SASL.
Hello Sam,
of course
On Wed, Jun 11, 2003 at 07:39:47PM -0400, Sam Varshavchik wrote:
Heberto del Rio writes:
Hi, I was wondering if it is really necessary to have rpm= 4.0.2, in
order to build the rpms? I have linux box SuSE 8.2 and its rpm is 3.0.6.
For some reason (which I don't understand) SuSE has not
Hello,
I have a server connected permanently to the internet and relaying to it via
SMTPAUTH using graphical clients like KMail or Mozilla does succeed.
However now I have set up courier on my notebook at home and want to relay as
well. I have sth. like:
[EMAIL PROTECTED] courier]# cat
Hallo,
pardon me, for following up to myself. Does nobody know an answer, is
this a FAQ (I did checked these, RTFMed and googled) or are my messages
not going through?
Best Regards
Mirko
---
This SF.net email is sponsored by:Crypto Challenge
Hello,
I have installed courier-0.40.2 (maildrop, esmtp, imap, pop3, mlm) on
RedHat 8.0. I use a setup with one mail-user vmail and userdb, mail goes
to /home/vmail/foo.com/bar/Maildir/ for user [EMAIL PROTECTED]
Now I want all addresses for a domain to be sent to this virtual user,
s.th.
Mitch (WebCob) said the following on 03/07/2003 06:47 AM:
I'm using mysql from the auth daemon for virtual domains.
I have REAL unix accounts per user.
I want to run maildrop.
In most cases, I don't want the users to have shell access.
but when I create .courier:
|/usr/lib/courier/bin/maildrop
Bowie Bailey said the following on 01/15/2003 04:36 PM:
Hello Bowie,
I am working on installing SpamAssassin on my Courier mail server. The
problem is that many of the accounts are forwarded to another mail server
via .courier files rather than being delivered locally. If I deliver
locally, I
Sam Varshavchik said the following on 05.12.2002 00:22:
Mirko Zeibig writes:
I have several virtual domains on one server, all users have virtual
accounts via USERDB. If a user sends mail via the web interface her FROM
address, which displays properly in the CGI-BIN UI as [EMAIL PROTECTED
Sam Varshavchik said the following on 06.12.2002 14:23:
Mirko Zeibig wrote:
Sam Varshavchik said the following on 05.12.2002 00:22:
[...]
esmtppercentrelay has nothing to do with the contents of any From: header.
So this is strange, if I have an empty esmtppercentrelay
Sam Varshavchik said the following on 12/06/2002 11:49 PM:
Mirko Zeibig writes:
Pardon me, but what is the sense to do this for *outgoing* mail and
change the address in the opposite direction?
Because that's exactly the opposite of what happens on incoming mail:
foo%baz@bar gets rewritten
Sam Varshavchik said the following on 05.12.2002 00:22:
Mirko Zeibig writes:
Hello,
I have several virtual domains on one server, all users have virtual
accounts via USERDB. If a user sends mail via the web interface her FROM
address, which displays properly in the CGI-BIN UI as [EMAIL
Mirko Zeibig said the following on 05.12.2002 08:31:
Sam Varshavchik said the following on 05.12.2002 00:22:
Mirko Zeibig writes:
Hello,
I have several virtual domains on one server, all users have virtual
accounts via USERDB. If a user sends mail via the web interface her FROM
address
Mirko Zeibig said the following on 05.12.2002 09:27:
Mirko Zeibig said the following on 05.12.2002 08:31:
Sam Varshavchik said the following on 05.12.2002 00:22:
Mirko Zeibig writes:
I have several virtual domains on one server, all users have virtual
accounts via USERDB. If a user sends
Hello,
I have several virtual domains on one server, all users have virtual
accounts via USERDB. If a user sends mail via the web interface her FROM
address, which displays properly in the CGI-BIN UI as [EMAIL PROTECTED]
is replaced by [EMAIL PROTECTED] during sending the message.
May I
several mail-addresses, one in a single line ala:
Mirko Zeibig [EMAIL PROTECTED]
Foo Bar [EMAIL PROTECTED]
...
Now I have several addresses which go to gmx.de and the gmx-MX is
complaining:
Nov 27 14:53:30 www courieresmtp:
id=0048C025.3DE4CE5A.19EC,from=[EMAIL PROTECTED],addr=[EMAIL
Hello,
I am trying to use maildrop and userdb to define virtual accounts on my
computer, but I do not succeed.
I have defined an account vmail (HOME=/home/vmail) with seperate directories
for every single domain (e.g. /home/vmail/zeibig.net), having set
home=/home/vmail/zeibig.net/mirko for
45 matches
Mail list logo