Updating src tree:
P src/common/lib/libc/gen/radixtree.c
P src/crypto/external/bsd/openssl/dist/crypto/engine/eng_devcrypto.c
U src/distrib/cdrom/NetBSD-9.0.mk
P src/doc/CHANGES.prev
P src/etc/etc.amd64/boot.cfg
P src/etc/etc.i386/boot.cfg
P src/external/cddl/osnet/sys/sys/opentypes.h
P src/sys/a
Hello,
there seems to be a deviation of the boot behavior in NetBSD 9_RC1
compared to NetBSD 8.1 under the following circumstances:
1) system has 2 disks (wd0, wd1)
2) disks are GPT-partitioned
3) GPT contains one GPT-partition (RAIDframe component) each
4) RAIDframe raid0 contains a NetBSD di
On 04/12/2019 22:20, Sevan Janiyan wrote:
> Hello,
> I've set the boot loader to load the pciverbose module by default via
> boot.cfg, this will result in a slightly different dmesg output (more
> info about devices), if you don't like this change or would prefer to
> spare resources, edit /boot
Now that you mentioned switching between modes, it finally made sense
why keyboard suddenly stopped working across systems which were
working previously. I just tested switching between modes and keyboard
still works on NKRO mode even on current/NetBSD 9, etc. Apparently, I
accidentally switched to
Almost certianly my:
https://releng.netbsd.org/cgi-bin/req-7.cgi?show=1503
I really need to see all of the problem keyboard's HID descriptors,
which, unfortunately, isn't easy to do without modifying the NetBSD kernel.
Seeing some dumps of the report data coming in would also be useful in
both N
> On Dec 5, 2019, at 4:26 AM, David Brownlee wrote:
>
> In the LSI/mfii arena:
>
> The 3008 based LSI cards (LSI 9340-8i or IBM M1215) seem quite nice,
> though I'd probably need a cable adaptor for the ports. Or I could
> step back to a 2008 card like the LSI SAS 9211-8i and not worry about
After having a play with ZFS on a couple of HP microservers I'm now
looking at switching my main Dell T320 across.
It has 8 SATA bays with the Dell H710P (effectively a LSI MegaRAID SAS
9266-8i) supported by the mfii driver.
Its a nice RAID controller with battery backed cache and all the other
R
On Wed, Dec 04, 2019 at 10:20:28PM +, Sevan Janiyan wrote:
> Hello,
> I've set the boot loader to load the pciverbose module by default via
> boot.cfg, this will result in a slightly different dmesg output (more
> info about devices)
... in new installations. This change will not affect existi
