Thank you, it works
xu...@sdf.org
SDF Public Access UNIX System - http://sdf.org
On Thu, 28 Dec 2023, Paul Goyette wrote:
On Thu, 28 Dec 2023, xuser wrote:
I have a 2018 disk and it does not work
it says invalid mbr size
IIRC, mbr-formatted disks are limited to 2TB. For larger, I think
On Thu, 28 Dec 2023, xuser wrote:
I have a 2018 disk and it does not work
it says invalid mbr size
IIRC, mbr-formatted disks are limited to 2TB. For larger, I think
you need to use gpt and wedges.
xu...@sdf.org
SDF Public Access UNIX System - http://sdf.org
On Thu, 28 Dec 2023, David
I have a 2018 disk and it does not work
it says invalid mbr size
xu...@sdf.org
SDF Public Access UNIX System - http://sdf.org
On Thu, 28 Dec 2023, David Brownlee wrote:
On Thu, 28 Dec 2023 at 18:47, xuser wrote:
Does NetBSD support 3TB ATA drive?
Some very old (decade plus) controllers
On Thu, 28 Dec 2023 at 18:47, xuser wrote:
>
> Does NetBSD support 3TB ATA drive?
Some very old (decade plus) controllers are not able to support drives
of that size, but any hardware that supports a 3TB ATA drive, NetBSD
should also support it. If you're using somewhat older 3TB drives be
aware
Does NetBSD support 3TB ATA drive?
xu...@sdf.org
SDF Public Access UNIX System - http://sdf.org
g...@gson.org (Andreas Gustafsson) writes:
>FWIW, the automated sysinst installs of NetBSD/sparc on
>babylon5.netbsd.org were failing with "newfs: size ... exceeds
>maximum file system size on `/dev/rsd0a' of ... sectors" from CVS
>source date 2015.12.04.23.54.06 until 2015.12.08.01.57.13:
This problem disappeared when a later snapshot was tried. The nightly build
201512080650Z installed perfectly so I suspect the original was corrupt or the
build ran during some updates which left parts inconsistent.
Dave
--
=
Phone: 07805784357
Open
Just tried to install current using the latest AMD64 snapshot 201512071640Z
on a blank SATA drive. Boots up off the memory stick OK and after allocating
partitions it fails when trying to newfs the first partition rwd0a. An error:
ioctl DIOCGMEDIASIZE failed 19 appears in the log messages
