I was running some network bandwidth tests using dd (WinXP2/Cygwin)
I was timing copies of a 300MB file from local disk to a remote
server. The local computer has enough memory to hold the file
in the memory cache once it is loaded.
I ran through increasing power-of-two block sizes from
512
Hi Eric,
08 Nov 2006 Eric Blake wrote:
...
Consider upgrading - we're at cygwin 1.5.21 and bash 3.1 (or
experimentally, 3.2). This list does not make it a habit to support older
than the previous release, because of the bugs that have been fixed since.
Is there a bash variable that
On Nov 9 00:56, Linda Walsh wrote:
I was running some network bandwidth tests using dd (WinXP2/Cygwin)
I was timing copies of a 300MB file from local disk to a remote
server. The local computer has enough memory to hold the file
in the memory cache once it is loaded.
I ran through
I am observing that string concatenation in bash 3.2.3(5), as well as in
3.1.17 (not exactly sure, the one that comes with the distribution),
overwrites the first string variable during concatenation:
Example code:
string1=one
string2=two
echo $string1
echo $string1+
echo $string1+$string2
--On Thursday, November 09, 2006 12:32:15 +0100 Borislav Tomov wrote:
Example results:
one
+ne
+two
The number 2: two
+ twos one
Example result:
for line XX which is the last +1 line of the script, the
following message is displayed
script_path: line XX: syntax error:
PACKAGE DESCRIPTION
===
BSFlite - A minimalist console AIM client
Homepage: http://bsflite.sourceforge.net/
Version : 0.82
License : BSD
BSFlite is a rather small and minimalistic client for AOL's Instant
Messenger service.
CYGWIN INSTALLATION INFORMATION
Perhaps there is some problem with uploading, if not, sorry for this post.
This morning (09:10) it was announced the uploading of the cited pakages
but until now nothing happened.
The strange thing is that usually after the announce the setup.ini in
ftp://sourceware.org/pub/cygwin is updated in
Hoping that the latest release of openssh would fix the problem I'm
having starting sshd as a service, I updated my Cygwin install to Ms.
Vinschen's latest release, 4.5p1-1. I then re-ran ssh-host-config.
Unfortunately, I'm still unable to start sshd as a service, either with
or without
On 11/9/06, Larry Hall (Cygwin) wrote:
DePriest, Jason R. wrote:
Is there some way I can make the original cygz.dll forget all about a
couple of its hard links because ls still shows it has 3 total instead
of 1 like every other single dll.
From your cygcheck.out:
Warning: There are
sshd is very picky about file permissions and ownership. I had a hard
time setting it up on one box, but luckily I had it working on another,
and by comparing, I finally got it working. I can't remember the
details, but one was getting /var/empty owned by SYSTEM.
Brian Kasper wrote:
Hello, Brian.
BK Hoping that the latest release of openssh would fix the problem I'm
BK having starting sshd as a service, I updated my Cygwin install to Ms.
BK Vinschen's latest release, 4.5p1-1. I then re-ran ssh-host-config.
BK Unfortunately, I'm still unable to start sshd as a service,
DePriest, Jason R. wrote:
On 11/9/06, Larry Hall (Cygwin) wrote:
DePriest, Jason R. wrote:
Is there some way I can make the original cygz.dll forget all about a
couple of its hard links because ls still shows it has 3 total instead
of 1 like every other single dll.
From your
Brian Kasper wrote:
Hoping that the latest release of openssh would fix the problem I'm
having starting sshd as a service, I updated my Cygwin install to Ms.
Vinschen's latest release, 4.5p1-1. I then re-ran ssh-host-config.
Unfortunately, I'm still unable to start sshd as a service, either
djh wrote:
Volker,
thanks for your efforts with the ImageMagick port for cygwin.
You're welcome :)
Having said that, I don't appreciate personal mail with regard to
cygwin packages. Please use the mailing list, I'm reading it.
I tried to build ImageMagick recently and was successfull for
PACKAGE DESCRIPTION
===
keychain - An OpenSSH key manager
Homepage: http://www.gentoo.org/proj/en/keychain/
Version : 2.6.8
License : GPL
Keychain is an OpenSSH key manager, typically run from
~/.bash_profile. When run, it will make sure ssh-agent is running; if
not, it will
The libpng packages offer the standard libraries for manipulating PNG
files, a turbo-studly lossless image format. This is a routine update.
libpng10-1.0.20-1
libpng10-devel-1.0.20-1
libpng-1.2.12-1
libpng12-1.2.12-1
libpng12-devel-1.2.12-1
CHANGES:
+ Although upstream is now providing an
On 11/10/06, Volker Quetschke [EMAIL PROTECTED] wrote:
Having said that, I don't appreciate personal mail with regard to
cygwin packages. Please use the mailing list, I'm reading it.
Bitte schön
I tried to build ImageMagick recently and was successfull for all but
perl-Image-Magick.
Did
Yaakov mentioned A fix for this is part of
ports/apps/imagemagick/ImageMagick-6.2.9.8-1.src.patch; I don't think
it's perl's fault, but rather the package's for putting a link library
in LDFLAGS instead of LIBS.
How can I get the patch, mentioned above, i.e.,
The jpeg package contains the Independent JPEG Group's libjpeg library
and various utility programs for manipulating jpeg files and images.
This is a routine update
jpeg-6b-12
libjpeg62-6b-12
libjpeg-devel-6b-12 (* new package)
CHANGES:
* Now using autotooled version of jpeg-6b from sourceforge
Wynfield Henman wrote:
Yaakov mentioned A fix for this is part of
ports/apps/imagemagick/ImageMagick-6.2.9.8-1.src.patch; I don't think
it's perl's fault, but rather the package's for putting a link library
in LDFLAGS instead of LIBS.
How can I get the patch, mentioned above, i.e.,
Re: ImageMagick
On 11/10/06, Volker Quetschke [EMAIL PROTECTED] wrote:
How about looking at the patch that's used for the cygwin package?
In case this wasn't clear enough, there is a Src? box behind most
cygwin packages when you use setup.exe, if you check that you will find
the source
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Wynfield Henman wrote:
How can I get the patch, mentioned above, i.e.,
ports/apps/imagemagick/ImageMagick-6.2.9.8-1.src.patch for studying?
I was referring to Cygwin Ports CVS[1], where I maintain the code to
cygport(1) as well as a large
I just updated my cygwin install and found that my old gmake from a vendor no
longer worked. After switching to the make distributed with cygwin I found
that it no longer likes seeing full paths in the form of c:/a/b/c.c.
Now it seems to want me to use the full /cygdrive/c/a/b/c.c.
The problem
On Nov 8 15:08, Jonathan C. Allen wrote:
http://jca.sdf1.org/cygwin/bsflite-0.82-1-src.tar.bz2
http://jca.sdf1.org/cygwin/bsflite-0.82-1.tar.bz2
http://jca.sdf1.org/cygwin/setup.hint
Uploaded. I removed 0.81-1.
Corinna
--
Corinna Vinschen Please, send mails regarding
On Nov 9 09:02, Billinghurst, David (CALCRTS) wrote:
From: Corinna Vinschen
I'm not using this so I can't test. The packaging looks good. But I don't
think
the gmp package should have libgmp-devel in its requirements. This
contradicts the
purpose of differing between runtime
On Nov 9 00:09, Jonathan C. Allen wrote:
http://jca.sdf1.org/cygwin/keychain/keychain-2.6.8-1-src.tar.bz2
http://jca.sdf1.org/cygwin/keychain/keychain-2.6.8-1.tar.bz2
http://jca.sdf1.org/cygwin/keychain/setup.hint
Uploaded. I removed 1.9-1 and 2.0.3-2 which leaves 2.5.3.1-1 as prev.
Again
upset: release/gmp/libgmp-devel/setup.hint:9: unknown key 'external-sources:
gmp'
I've changed the key in setup.hint to external-source.
FYI.
cgf
On Thu, Nov 09, 2006 at 10:22:49AM -0500, Christopher Faylor wrote:
upset: release/gmp/libgmp-devel/setup.hint:9: unknown key 'external-sources:
gmp'
I've changed the key in setup.hint to external-source.
I thought I had written upset so that it would not stop after the first
error but, I guess
upset: *** warning package libmpfr0 requires non-existent package gmp3
I suppose these will be trickling in all day.
How should this one be fixed?
cgf
On Nov 9 11:00, Christopher Faylor wrote:
upset: *** warning package libmpfr0 requires non-existent package gmp3
I suppose these will be trickling in all day.
How should this one be fixed?
Would be libgmp3. I saw you already fixed it. Sorry, I really thought
I'd have catched the
hmm no hints - keep googling I guess. I'm sure it must be a security/config
issue - xhost or xauth issue somewhere - just haven't found the magic key yet
since it works from Windows to my two linux machines.
Maybe wrong group - maybe should have been cygwin-apps for ssh even though I
thought
Brian Keener wrote:
hmm no hints - keep googling I guess. I'm sure it must be a security/config
issue - xhost or xauth issue somewhere - just haven't found the magic key yet
since it works from Windows to my two linux machines.
Maybe wrong group - maybe should have been cygwin-apps for ssh
On Thu, Nov 09, 2006 at 12:25:13PM -0500, Brian Keener wrote:
hmm no hints - keep googling I guess. I'm sure it must be a
security/config issue - xhost or xauth issue somewhere - just haven't
found the magic key yet since it works from Windows to my two linux
machines.
Maybe wrong group - maybe
Christopher Faylor wrote:
Sending this kind of question to cygwin-apps would be a sure-fire way to
get you unsubscribed from cygwin-apps. It is not appropriate for that
list.
As you already knew - you are correct - upon rereading I see my error. I was
thinking simply in terms of apps - my
PACKAGE DESCRIPTION
===
BSFlite - A minimalist console AIM client
Homepage: http://bsflite.sourceforge.net/
Version : 0.82
License : BSD
BSFlite is a rather small and minimalistic client for AOL's Instant
Messenger service.
CYGWIN INSTALLATION INFORMATION
PACKAGE DESCRIPTION
===
keychain - An OpenSSH key manager
Homepage: http://www.gentoo.org/proj/en/keychain/
Version : 2.6.8
License : GPL
Keychain is an OpenSSH key manager, typically run from
~/.bash_profile. When run, it will make sure ssh-agent is running; if
not, it will
The jpeg package contains the Independent JPEG Group's libjpeg library
and various utility programs for manipulating jpeg files and images.
This is a routine update
jpeg-6b-12
libjpeg62-6b-12
libjpeg-devel-6b-12 (* new package)
CHANGES:
* Now using autotooled version of jpeg-6b from sourceforge
37 matches
Mail list logo