With the snap 20051019 13:12:47 the command 'cp -p' of coreutils 5.90-3
works fine.
A curiosit.
The recent snapshots contain also mingw-runtime and w32api: is there a
special reason for this?
Thanks,
angelo.
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem
With ghostscript-8.15-2 there is a stange behaviour of 'gv' in displaying
pdf files.
If one uses:
$ gv foo.pdf
that works fine.
But using:
$ gv
and then opening 'foo.pdf' with 'Open' menu item, there is an
Unrecoverable error of GPL Ghostscript 8.15
This 'gv' behaviour was
The problems described in
http://cygwin.com/ml/cygwin/2005-12/msg00441.html
are absent if one uses the snapshot 2005.10.24 12:04:00.
Those problems appear at least from the snapshot 2005.11.17 and are
present also with the last snapshot 2005.12.10.
[With the recent snapshots some commands
Dr. Volker Zell wrote:
I think the OP means emacs and not xemacs.
Yes, I mean EMACS and not XEmacs!
I confirm that the problems described in
http://cygwin.com/ml/cygwin/2005-12/msg00441.html
are absent with the snapshot 2005.10.24.
Ciao,
angelo.
--
Unsubscribe info:
With the snapshots 20051212 13:44:06 the problems described previously
remain.
They seem a little worst.
Best regards,
Angelo.
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports: http://cygwin.com/problems.html
Documentation:
Dr. Volker Zell wrote:
I just checked this with 20051212 and emacs (not xemacs).
emacs -q
M-x flyspell-mode
M-x compile
M-x recompile
For me everything is working fine here.
I have tried also with the snapshots 20051212 13:44:06, 20051213 00:12:38
with the same problems: they
After I reinstalled Cygwin there is the following linker error in build
some applications:
--
g77 ... foo.F -lcygipc
/bin///ld: cannot find -lcygipc
...
--
The cygipc package has not been reinstalled, it,
On Fri, 16 Dec 2005, Igor Pechtchanski wrote:
On Fri, 16 Dec 2005, Angelo Graziosi wrote:
After I reinstalled Cygwin there is the following linker error in build
some applications:
--
g77 ... foo.F -lcygipc
/bin///ld: cannot find
I built ROOT-5.06.00, a CERN application, at Nov 10 2005 using GCC-3.3.3-3
and the snapshot of that time.
All worked fine.
Now I have repeated the build using the same method, the same GCC-3.3.3-3,
but with the current snapshot 20051216 23:59:19.
The build fails:
I wrote:
The code that causes this error should be :
---
#if defined(_POSIX_SOURCE)
// Posix does not require that the d_ino field be present, and some
// systems do not provide it.
# define REAL_DIR_ENTRY(dp) 1
#else
# define
Only FYI:
Corinna Vinschen wrote:
This is a NO-NO, especially since it also creates very strange problems
when running some Cygwin applications.
It seems that those DLL caused also this problem:
http://cygwin.com/ml/cygwin/2005-12/msg00441.html
Happy holiday,
Angelo.
--
I had that problem some weeks ago, using CERNLIB libraries in building
fortran programs. (http://cygwin.com/ml/cygwin/2005-12/msg00641.html)
I solved deleting '-lcygipc' from the build command. Also PAW, a CERN
application had problems, so I rebuilt all CERNLIB deleting -lcygipc.
Now all works
It seems that there are applications like gv-3.5.8-2 that require gs-x11.
If you look at the post-install, gv.sh, at the end, it says:
# Quiet the cygwin mailing lists about 'unknown device x11' mails
cd /bin
ln -sf /usr/X11R6/bin/gs.exe gs-x11
(the comment # Quiet... is in gv.sh!)
With coreutils-5.3.0-9 I observe:
---
$ ls -lrta
total 191
-rw-r--r-- 1 Administrator Administrators 201 Aug 18 22:41
test-strerror.c
-rwxr-xr-x 1 Administrator Administrators 8988 Aug 18 22:42
test-strerror.exe
-rw-r--r--
It seems that the GPL Ghostscript 8.50 version is released
(http://www.cs.wisc.edu/~ghost/doc/GPL/gpl850.htm).
Will the cygwin version of ghostscript (now 8.15) be updated?
Cheers,
Angelo.
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports:
I do not know if this can help.
With the snapshot 20060104 I observe this in association with ZoneAlarm:
Running startxwin.bat as user with no admin. priv., the dos box relative
to XWin and xterm are not closed, so that, at the end, one gets 3
windows: 2 dos and 1 xterm.
With the snapshot
I wrote:
With the snapshot 20060104 I observe this in association with ZoneAlarm:
Running startxwin.bat as user with no admin. priv., the dos box relative
to XWin and xterm are not closed, so that, at the end, one gets 3
windows: 2 dos and 1 xterm.
With the snapshot 20060103 all worked
I am a little confused.
Usally I use snapshots. The last was 20060112 20:32:44.
Now should I install just Cygwin 1.5.19-2 or should I force also the
reinstall of mingw-runtime and w32api packages (those in the official
cygwin distribution)?
Best regards,
Angelo.
--
Unsubscribe info:
Corinna Vinschen wrote:
Angelo Graziosi wrote:
I am a little confused.
Usally I use snapshots. The last was 20060112 20:32:44.
Now should I install just Cygwin 1.5.19-2 or should I force also the
reinstall of mingw-runtime and w32api packages (those in the official
cygwin
Corinna Vinschen wrote:
http://cygwin.com/ml/cygwin/2006-01/msg00747.html
Many thanks.
Now it is all more clear.
Best regards,
Angelo.
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports: http://cygwin.com/problems.html
Documentation:
I have some Fortran code with a little of C code (CERNLIB) that was
patched in the past because Cygwin did not support lockf() function.
Now I would know if the recent versions of Cygwin support lockf() function
so that one can remove that patch.
Many thanks,
Angelo.
--
Unsubscribe
Some days ago, I installed coreutils 5.93-3 as exp. package.
After upgrading to base-files-3.7-1, I reinstalled coreutils-5.93-3 but I
discovered that /etc/DIR_COLORS was that of base-files-3.6-1 and not
3.7-1. (and the command 'cygcheck -c coreutils base-files' said 'OK')
So after many tries
With this version of base-files reappears a problem that was present with
a previous version.
Suppose:
rm -i foo.txt return
rm: remove regular file `foo.txt'? y backspace n return
With backspace the cursor should remove 'y' at which place should
appears 'n'.
But with base-files
I wrote:
http://cygwin.com/ml/cygwin/2006-01/msg01384.html
I am sorry,
I do not know what happened, but after reinstalling base-files-3.7-1 that
problem disappeared.
Cheers,
angelo.
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports:
There is some problem between the 20060606 snapshot and the drives
D:, E: ...
I have the cygwin prefix mounted to '/' (since long time) so that I can
use 'ls -lrt /e' etc..
The drive E: is a DVD burner.
When I insert a disc containing two directory, Cernlib and ROOT, which I
backed-up
I am afraid,
I have spent a lot of time trying to send the cygcheck report attaching
the file or copying/pasting it in the message, but
[EMAIL PROTECTED] return the message saying that, perhaps, it
is a spam.
My system is W2K SP4+Cygwin with all package installed.
I do not use any Cygwin
The snaps. 20060209 14:37:47 works fine with all drives.
Thanks,
Angelo.
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports: http://cygwin.com/problems.html
Documentation: http://cygwin.com/docs.html
FAQ:
,
Angelo Graziosi
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports: http://cygwin.com/problems.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/faq/
Regarding the gv-3.6.1-1.tar.bz2 package that is being uploaded, it works
WITHOUT the problems described here:
http://cygwin.com/ml/cygwin/2006-02/msg00600.html
Thanks,
Angelo.
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports:
I have noted that after the last upgrade to 21.4.19-1, in (W2K SP4)
Start | Programs | Cygwin-X | Editors
the link to XEmacs does not have an icon (usually the 'X' of XWin).
I have also reinstalled, without any change regarding this.
Is there a special reason for the lack of that icon ?
I have noted that many applications do not start when one clicks on the
links in
Start | Programs | Cygwin-X (on W2K SP4)
This happens even if one has started XWin (startxwin.bat).
For example, 'xeyes' starts (after startxwin.bat), but emacs does not!
Then, why should one install
On Mon, 20 Feb 2006, Brett Serkez wrote:
snip
For example, 'xeyes' starts (after startxwin.bat), but emacs does not!
Emacs used to run reliably for me, but the last couple of releases
simply consumes significant CPU and never displays. How many such
applications have your tried and how
Dr. Volker Zell wrote:
The xemacs package does not install any Startup links. This must be
another package presumably X-startup-scripts-1.0.11-1.
Yes, I concord. But that icon has disappeared after the upgrade to
21.4.19-1 of XEmacs!
In any case I will try to reinstall also X-startup...
René Berber wrote:
The icon depends on the name of the executable (in fact is inside the
executable), so everytime xemacs changes version you have to change the
shortcut properties to point to the executable (i.e.
%SystemDrive%\cygwin\bin\xemacs-21.4.19.exe)
Why should this happen with
Eric Blake wrote:
Well, I guess not many people used it, due to the lack of complaints to
this list
I used coreutils 5.94-2 but I did not seen anything. (I use also
bash-3.1-2, bashdb-3.1-0.04-1, emacs*-21.3.50-2, findutils-4.3.0-1,
lesstif-0.94.4-1 and snap. 20060224)
Now I use 5.94-3 with
I have tried shutdown-1.6-1. Now it seems to work in the sense that
shutdown now
shutdown 5
... 30
etc.
starts the procedure of shutdown, i.e. disconnets the user, saves the
configuration... . When it seems it is being to turn off the PC, Windows
says (in low resoultion)
With -x it works fine.
Thank you.
angelo.
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports: http://cygwin.com/problems.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/faq/
After upgrading some packages (tetex-3.0.0-3.tar.bz2, man-1.5p-1.tar.bz,
doxygen-1.4.2_20050421-1.tar.bz2, yesterday 06 May 2005
and subversion-1.1.4-1.tar.bz2, subversion-devel-1.1.4-1.tar.bz2,
_update-info-dir-00232-1.tar.bz2, tzcode-2005h-1.tar.bz2,
xemacs-21.4.17-1.tar.bz2, xemacs-tags,
.
On Sat, 7 May 2005, Christopher Faylor wrote:
On Sat, May 07, 2005 at 05:52:10PM +0200, Angelo Graziosi wrote:
I discovered the following strange behaviour in bash and xterm (startxwin)
shells:
BACKSPACE does not delete y as aspected but it only shifts the cursor on
y and when I type n
for the
terminal) to get this to work. I was able to observe the exact symptoms
you reported and correct do the above.
-- Mark
Angelo Graziosi wrote:
Not only in xterm but also in standard bash shell.
I have always used xterm and until today I never have discovered those
problems.
What
The problems described prviously exist in standard bash shell (that is
launched with the link on Desktop) and in the shell launched by xterm
(with startxwin.bat).
THEY DO NOT exist in dos box (with C\:cygwin\bin in W2KSP4 path) and in
the shell launched with RXVT: in these cases the BACKSPACE
On Sun, 8 May 2005 18:52:58 -0400, Christopher Faylor wrote:
On Sun, May 08, 2005 at 03:02:17PM +0200, Angelo Graziosi wrote:
The problems described prviously exist in standard bash shell (that is
launched with the link on Desktop) and in the shell launched by xterm
(with startxwin.bat
I have not changed anything in configuration (I have not touched any
thing in /etc/profile etc.)
Until some days ago all worked fine. With some upgrades or i do not know
what the BACKSPACE does not work correctly in answering at command like
rm -i: it works as a LEFT arrow key. This happens
Jan,
Have you read http://cygwin.com/ml/cygwin/2005-05/msg00441.html ?
Can we download 3.00-3 suite or we have to wait for 3.00-4?
WHY in teTeX 3.00-2 the directory .texmf is created in the $HOME directory
of the user who installed the packages of teTeX?
The others users?
angelo.
--
Eric,
can you answer to this mail
http://cygwin.com/ml/cygwin/2005-05/msg00491.html ?
Summarizing I want to know if the problems I described
are bugs of some Cygwin packages (should I wait for new upgrades?)
or
are the normal behaviour of Cygwin, so that if I do not like them
I
I have never touched /etc/profile which is a copy of
/etc/defaults/etc/profile dated Dec 7 20:53 and I think it belongs to
3.2-1 version of base-file which is dated Dec 7 19:52 (I upgrade Cygwin
continuously).
I want to underline that until some weeks ago the problems with BKSPACE
were absent.
I have tried your code stty erase ^H in .bash_profile and as I thinked
it works for standard bash shell and xterm BUT NOT for RXVT in which, now,
BKSPACE is dead. In others words RXVT wants stty erase ^? as in
/etc/profile.
I have tried also the code
When loging as user without admn. priv.
(e.g.: owner= Graziosi, group= Users)
the standard bash shell (cygwin.bat) says:
chmod: changing permissions of `/tmp': Permission denied
This is caused by
if [ -d /tmp ]; then
chmod 1777 /tmp
fi
in /etc/profile.
It assign the permission t
John,
you mailed to Igor that there will be a new release of base-files.
Will it fix also /etc/profile?
==
As I wrote:
http://cygwin.com/ml/cygwin-xfree/2005-05/msg00140.html
the problem of
chmod 1777 /tmp
is present also for the user (NOT-ADMIN.) that
With Cygwin 1.5.17-1, after starting XWin (startxwin.bat) and Emacs, the
Emacs window does not show itself, i.e.
$ emacs
[1] 1776
but the emacs window does not appear! The ps command shows:
$ ps
PIDPPIDPGID WINPID TTY UIDSTIME COMMAND
1380 11380
-- Forwarded message --
Date: Mon, 30 May 2005 19:07:56 +0200 (MET DST)
From: Angelo Graziosi [EMAIL PROTECTED]
To: cygwin-xfree@cygwin.com
Subject: Re: Emacs problem with Cygwin 1.5.17-1 (CGF please comment)
I pointed out a problem between Emacs (21.2-13, i.e. curr
I remember you, that reinstalling Cygwin 1.5-16-1 (and keeping coreutils
5.3.0-6) Emacs works fine.
I would keep 1.5.17-1 because it allow me to build CERNLIB-2005 with a
limited number of patches (with 1.5.16-1 there is something more to
patch)
I have also tried XEmacs 21.4.17-1. It starts
http://cygwin.com/ml/cygwin-xfree/2005-05/msg00274.html
best regards
angelo.
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports: http://cygwin.com/problems.html
Documentation: http://cygwin.com/docs.html
FAQ:
On Wed, 1 Jun 2005 19:09:35 -0400 , Christopher Faylor wrote:
Please stop doing this. I do read email. I will read your email
when I have time. Pinging me is not going to help.
You should at least answer OK. the problem is under investigation or
something else.
angelo.
--
Unsubscribe
the cycle.
Best regards,
Angelo Graziosi
On Thu, 2 Jun 2005, Larry Hall wrote:
At 01:37 PM 6/2/2005, you wrote:
On Wed, 1 Jun 2005 19:09:35 -0400 , Christopher Faylor wrote:
Please stop doing this. I do read email. I will read your email
when I have time. Pinging me is not going
Thanks for the rapid communications
I have resolve downgrading to 1.5.16-1.
angelo.
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports: http://cygwin.com/problems.html
Documentation: http://cygwin.com/docs.html
FAQ:
I want to complete the story which has some point of interest.
Obviously, you are not obliged to replay, not to take care of
problems.
As you can see from this mailing list, after installing the
cygwin package 1.5.17-1 (26-27 May) I had a problem with Emacs:
it took all CPU (100%) and its
I have noted that when one uses
kill -9 process-PID
in bash 3.0-2 (test), the command kills the process but also bash (even
if one uses /bin/kill...).
In bash 2.05b-17 that command kills only the process.
These things happen with
cygwin 1.5.16-1
cygwin 1.5.17-1
snaps. 20050615
:
On Fri, 24 Jun 2005, Angelo Graziosi wrote:
I have noted that when one uses
kill -9 process-PID
in bash 3.0-2 (test), the command kills the process but also bash (even
if one uses /bin/kill...).
In bash 2.05b-17 that command kills only the process.
These things happen
The snapshot cygwin-inst-20050621.tar.bz2 seems to change something in the
packages mingw-runtime and w32api (and, obviously, in Cygwin pkg.).
Why are these packages not updated as that of Cygwin-1.5.18-1?
Best regards,
angelo
--
Unsubscribe info:
Last morning I have made a build of ROOT (a CERN application) using the
snapshot 20050705, bash-3.0-3-test, ash-20040127-1, coreutils-5.3.0-6
GCC-3.3.3-3. The buid takes almost 1.5 h
After upgrading to bash-3.0-7, ash-20040127-3, coreutils-5.3.0-7 I have
tried a new build. This time the buid
On Thu, 7 Jul 2005, Igor Pechtchanski wrote:
On Fri, 8 Jul 2005, Angelo Graziosi wrote:
Last morning I have made a build of ROOT (a CERN application) using the
snapshot 20050705, bash-3.0-3-test, ash-20040127-1, coreutils-5.3.0-6
GCC-3.3.3-3. The buid takes almost 1.5 h
After
On Fri, 8 Jul 2005, Eric Blake wrote:
...
Meanwhile, you will have to wait patiently until the upstream
maintainer releases a patch (because I haven't the faintest clue
where in the lexer to look for fixing his parse error). Repeated
pinging on the cygwin list will not help speed up
Using (from std bash shell):
rebaseall -v
I have noted (after upgrading to Bash-3.0-7) that in the output there is a
line like:
/usr/lib/gtk-2.0/2.4.0/fiReBaseImage (/usr/bin/cygiconv-2.dll) failed
with last error = 6
I do not know if this could be a problem.
After that rebasing,
Brian Dessent wrote:
Angelo Graziosi wrote:
/usr/lib/gtk-2.0/2.4.0/fiReBaseImage
(/usr/bin/cygiconv-2.dll) failed
with last error = 6
Please read the thread Perl Win32::Shortcut screws up fork for the
discussion of this known problem. As a temporary work around you can
try
Henry S. Thompson writes
Check archives for email from me about emacs, rebase and libtiff
I have cheked your problem with XEmacs, but the problem of EMACS after
rebasing all is that it hangs (it takes all CPU but the windows does not
shows itself), NOT ...unable to remap..
The application
I send you a simple report.
I have tried to use the new version of rebaseall.
Steps followed:
1) Add C:\cygwin\bin and C:\cygwin\usr\X11R6\bin to Windows path
2) Restart PC
3) Start/Run/C:\cygwin\bin\ash.exe
4) Run the rebaseall command with the result
$ rebaseall -v
grep: Could not open
From the mailing list it seems that after upgrading Bash-3.0-10,11, the
postinstall (00bash.sh) should copy bash.exe to sh.exe.
This happened with previous version (3.0-7 or 3.0-8) but not with the more
recent, 3.01-10 and the last 3.0-11.
For example:
$ bash --version
GNU bash, version
After installing the stripped version of the snap 20050806, is not
possible to open any shell which uses cygwin1.dll: there is a popup window
of Windows with a message like this:
DLL... image damneged.. cygwin1.dll is not a valid image...
I have created a stripped version of the snap
From Cygwin 1.5.17-1, the problems which I met with Emacs were that after
rebasing all, Emacs did not work any more.
After several attemps I discovered that is sufficient to reinstall the
package libncurses7 to make Emacs works again.
Now I am working with Emacs (in X) that is in test section,
When installing octave-forge-2005.06.13-3 setup.exe gives many errors:
error: unsupported file 'K'
One can only click OK to pass the next error, until the end.
The setup.exe version is: 2.457.2.2
With the previous (useful) version, 2005.06.13-1, there are not installing
problems.
Best
On Mon, 15 Aug 2005, Bolbby McNulty wrote:
Angelo Graziosi wrote:
When installing octave-forge-2005.06.13-3 setup.exe gives many errors:
error: unsupported file 'K'
One can only click OK to pass the next error, until the end.
The setup.exe version is: 2.457.2.2
.
-- Forwarded message --
Date: Tue, 16 Aug 2005 23:02:44 +0200 (MET DST)
From: Angelo Graziosi [EMAIL PROTECTED]
To: Bolbby McNulty [EMAIL PROTECTED]
Cc: cygwin@cygwin.com
Subject: Re: Problems installing octave-forge-2005.06.13-3
On Mon, 15 Aug 2005, Bolbby McNulty wrote
Some weeks ago, someone sends the following test programs that did not
worked with the snap of that time:
--
/* test-strerror.c */
#include stdio.h
#include string.h
int main(int argc, char *argv[])
{
char *s;
s = strerror(-8);
According to Larry Hall on 8/30/2005:
According to Thomas Chadwick on 8/30/2005:
.
I'm running into trouble at the make depend point in the
process. It's not finding a couple of include files. Here's an example
message:
makedepend: warning: x2x.c (reading /usr/include/sys/unistd.h,
On Wed, 31 Aug 2005, Larry Hall wrote:
At 06:35 PM 8/30/2005, you wrote:
According to Larry Hall on 8/30/2005:
According to Thomas Chadwick on 8/30/2005:
snip
As I see it, either xmkmf is setting up the wrong search path, or
something is wrong with my gcc installation (since
On Thu, 1 Sep 2005, Larry Hall wrote:
At 05:53 PM 9/1/2005, you wrote:
On Wed, 31 Aug 2005, Larry Hall wrote:
I have uninstalled GPC package and removed the
/usr/lib/gcc-lib/i686-pc-cygwin/3.3.3/ directory so that now there is not
any reference to 3.3.3 version of GCC (not in the
On Thu, 1 Sep 2005, Larry Hall wrote:
At 05:53 PM 9/1/2005, you wrote:
On Wed, 31 Aug 2005, Larry Hall wrote:
I have uninstalled GPC package and removed the
/usr/lib/gcc-lib/i686-pc-cygwin/3.3.3/ directory so that now there is not
any reference to 3.3.3 version of GCC (not in the
I have installed the snap 20050905.
When X/Cygwin is started with startxwin.bat, xterm hangs, its window is
white instead of black (as I configured) and the prompt does not appear.
Windows (W2K SP4) says : Annull or Stop the process.
With the previous snap (20050901) all worked fine, so I
I have noted (with snap 20050901) that now in '/' it appears 'dev'
(virtual) directory (and proc):
$ ls -lrt /
ls: /dev: No such file or directory
total 742
d- 2 0 Jan 1 1970 dev
...
I have upgraded setup.exe to new 2.510.2.1 and tried to use it to install
(Install from Local Directory) some upgrading package (file-4.15-3 etc.) :
all in setup.ini 20050907 16:30 that requests this new version of
setup.exe.
But it fails when 'parsing ini file': a popup window appears saying:
I am trying the snap 20050913 (uname -a: 20050913 15:38:54) on W2K
SP4 and it seems to work fine (in particular, no problems with RXVT).
I have noted only that the /dev directory does not appear in root (/) :
$ ls -lrt /
total 754
drwxrwxrwx+ 19 Administrator Users4096 Apr
In setup.ini there is:
@ _update-info-dir
sdesc: Generate info/dir file automatically
category: _PostInstallLast
requires: texinfo bash
version: 00308-1
install: release/_update-info-dir/_update-info-dir-00309-1.tar.bz2 373
3e583f639de35fae1578b92a5e439ee1
source:
I have noted that testing several snapshots (20050906, 20050908, 20050909,
20050914) some simple application written in C++ does not work any
more. For example:
$ ./my_app.exe
bash: ./my_app.exe: Argument list too long
and my_app does not use any argument!
I remember that there was a snapshot
With the September snapshots, the following code:
// hello_tst.cpp
#include iostream
using namespace std;
int main()
{
cout Hello, world! endl;
return 0;
}
-
works
Christopher Faylor wrote:
If this program isn't too big (and I don't see why it should be) please
post it here so that I can try it.
The Borland C++ 5.5 compiler, freecommandLinetools.exe, is 8.7 MB. It
should be downloaded from Borland site.
In any case also
Christopher Faylor wrote:
This will be fixed in the upcoming snapshot. Look for the comment:
* spawn.cc (av::fixup): Guard against problems reading an
executable which does not match Microsoft's documentation about
PE format.
in the ChangeLog. Once that shows
Using the snap 20050914 20:03:52
As I wrote the snap 20050914 20:03:52 fixed the problems with Borland C++
applications (spawn.cc (av::fixup): Guard against problems reading an
executable which does not match Microsoft's documentation about PE
format) etc.
But I
Perhaps there is an error in setup.ini 20050920 17:00:
@ perl-libwin32
..
install: release/perl/perl-libwin32/perl-libwin32-0.191-4.tar.bz2 1179120
0d34ca5470a62cc190786bde5e238ab1
source:
Rebuilding, with GCC 3.4.4-1, a few my Windows applications
(those that use -mwindows), I have found a compiler error that
was absent in the build with GCC 3.3.3-3.
I have created the simplest test case that reproduces the 'phenomenon'
//
// test.cpp
//
I have observed with recent snapshots (20050922, 20050923 19:07:57 but
also with some previous snaps) that when one closes the Emacs window
(after the work is finished), in the xterm window, appear a lot of of
lines like these:
--
2638536
Dave Korn wrote:
You can fix it like this:
[EMAIL PROTECTED] /test/cplus g++ test.fixed.cpp -o test
[EMAIL PROTECTED] /test/cplus diff -pu test.cpp test.fixed.cpp
--- test.cpp2005-09-26 10:52:37.405042000 +0100
+++ test.fixed.cpp 2005-09-26 10:52:26.555119000 +0100
@@ -1,6 +1,8
For the sake of completeness, I have tried many times to build Emacs-CVS
configuring with GTK toolkit.
The build is fine but emacs fail to start:
$ emacs-cvs
***MEMORY-ERROR***: emacs[5172]: GSlice: failed to allocate
504 bytes (alignment: 512): Function not implemented
(This not only with
Jan DjÃrv wrote:
It would be a small thing to figure out which part is used on cygwin if
the config.h was available.
Every time that the build of Emacs-CVS is configured with:
... ./configure --prefix=... --with-gtk
it fails when starting (on Cygwin) in this way:
$ ./emacs-cvs
Grok Mogger wrote:
Could someone please tell me how to launch a shell?
This is the method I use.
In $HOME I have this .Xdefaults:
~/.Xdefaults
--
! -[ urxvt ] -
URxvt*background: Black
URxvt*foreground: LightGray
After installed the snapshot, trying to remove /tmp/usr there is this new
problem:
cd /tmp
ls -lrt
...
drwxr-xr-x+ 3 Angelo Administrators0 Feb 22 14:18 usr
rm -rf usr/
rm: failed to close directory `usr/'
rm: FATAL: failed to close directory `usr//bin': Permission
Nordine ??? wrote:
Please gives me some assistance to resolv this problem.
thank you very much.
The best solution is to flag your G95/Gulp problems directly to G95
guys: http://www.g95.org/
If you visit that page, you will find useful informations on how to send
a bug report and to who.
I have sent a few replays to this mail showning a link from which the
binaries can be downloaded but the replays do not shown on Cygwin list nor
I have received a message saying they were refused.
So this is a sort of test trying to understand the cause.
Cheers,
Angelo.
--
Unsubscribe
The requested binaries can be downloaded from:
http://www.webalice.it/angelo.graziosi
The Cernlib README file contains the information to install.
Cheers,
Angelo.
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports:
I have always used ssh in this way:
$ ssh -1 [EMAIL PROTECTED]
but after updating to this version:
$ ssh -1 [EMAIL PROTECTED]
Disconnecting: Corrupted check bytes on input.
I have tried more than one host with the same result.
I have also deleted ~/.ssh so that it is regenerated but same
1 - 100 of 768 matches
Mail list logo
