/ Elfyn McBratney [EMAIL PROTECTED] wrote:
| Try this:
| $ gcc -o test -L. libmetis.a initialize.c
| You need to include the static archive into your image. I'm pretty sure the -l{}
|only applies to shared libraries.
Just a short note, more that putting the lib at the end, -lmetis is
not
This one produced the error file attached with Windows XP.
*** REPLY SEPARATOR ***
On 12/21/2002 at 12:12 AM Marino Duregon wrote:
or this
http://www.users.qwest.net/~weissj/Cygwin/CygwinAddons.html
cheers
Marino
- Original Message -
From: Bruce Eckel [EMAIL
Maybe the horse has left the barn already but it would have been nice
(tm) if these type of symbols were marked in some generic way so that
we wouldn't have to keep remembering to extend this table.
I recall commenting on this aspect in a recent binutils thread in the
cygwin lists, and
I tested this one on Windows XP and Windows 2000 and it worked very
nicely on both. Any chance of sticking the instructions below
somewhere in the standard cygwin distribution?
*** REPLY SEPARATOR ***
On 12/21/2002 at 12:01 AM Marino Duregon wrote:
try this one ...
thank you,
with the recent snapshot everything works fine again.
even the hostname issue is fixed...
Hans
On Sat, Dec 21, 2002 at 12:52:39AM +0100, Hans Sturm wrote:
i installed sshd with host-config as service under SYSTEM
Hum... I should have known. A reboot fixed the problem. I suppose that what I get for being a Unix geek: you don't _have_ to reboot a unix system to fix broken stuff. (unless it's really broken, like disks, etc, etc).
On Wed, 2002-12-18 at 13:50, [EMAIL PROTECTED] wrote:
I've recently
In my experience with MPI programs, comparing cygwin and linux,
message passing takes longer under cygwin, but the time may be made up
elsewhere, if the compilation is truly similar.
You mention that considerable time is spent in log(), pow(), exp()
but leave us guessing how you implemented
Well, Im not sure whats going on. Installing the libiconv2 package worked
for that error, but why is it looking for it?? I never installed that one
in the first place. Below is the bash -x -l output and the ERR_MSG is
where the error occured
After a bit of investigation - I've narrowed down some of the parameters of
the problem.
First of all the problem appears to exist only on NT4.0 - not W2K. Second,
it only exists if one first
telnets to the NT4.0 box and THEN invokes ftp and sends a file. If I use
ftp from a LOCAL
bash shell, the
I did a further test to verify the existence of the problem. I did the
following from a
locally invoked bash shell [ for security - I starred out the hostname
]. I transferred
the file via ftp from the local box TO the local box into a sub-directory.
The same
behavior exists if the file is
On Fri, Dec 20, 2002 at 11:41:22PM -0500, Christopher Faylor wrote:
I've checked in a fix and am generating a new snapshot now.
Thanks Chris, cygwin from cvs works fine on WinME.
FYI, I have had another outstanding problem for a long time. Unfortunately
it is a lot less specific and I have no
Robert Collins wrote:
On Sat, 2002-12-21 at 15:39, Christopher Faylor wrote:
Maybe the horse has left the barn already but it would have been nice
(tm) if these type of symbols were marked in some generic way so that
we wouldn't have to keep remembering to extend this table.
I recall
On Sat, Dec 21, 2002 at 09:57:16AM -0500, Terry wrote:
Well, Im not sure whats going on. Installing the libiconv2 package worked
for that error, but why is it looking for it?? I never installed that one
in the first place.
You never installed what in the first place? If you go to the package
David,
Now I'm a big Linux proponent and only currently wed to Windows by a quirk
of my personal employment history, but never did I realize that rebooting a
Linux system would fix a broken disk.
Those Linux kernel programmers really _are_ miracle workers, aren't they?
Wow!
Randall Schulz
hello:
I am trying to compile glib on cygwin. I did ./configure and came upto make
install. It quit about half through complaining about missing function mostly
_g* type.
Since glib is a pretty low level, I was puzzled why it failed. Anybody has
ideas?
thanx
--
Unsubscribe info:
On Sat, Dec 21, 2002 at 02:10:18PM +0100, Ralf Habacker wrote:
Maybe the horse has left the barn already but it would have been nice
(tm) if these type of symbols were marked in some generic way so that
we wouldn't have to keep remembering to extend this table.
I recall commenting on this aspect
bash being the default shell, tcsh's configuration files have,
apparently, bit-rotted. When started directly -- instead of from
bash -- a bunch of utilities (from /usr/bin) are not found.
I might have missed something in the thread but to me this seems to be
an issue with where the path is
On Sat, Dec 21, 2002 at 06:48:09PM +1100, Robert Collins wrote:
On Sat, 2002-12-21 at 15:39, Christopher Faylor wrote:
Maybe the horse has left the barn already but it would have been nice
(tm) if these type of symbols were marked in some generic way so that
we wouldn't have to keep
Does the meanness never end?
Won't you _please_ think of the children?!
At 09:57 2002-12-21, Christopher Faylor wrote:
On Sat, Dec 21, 2002 at 09:07:48AM -0800, Randall R Schulz wrote:
David,
Now I'm a big Linux proponent and only currently wed to Windows by a quirk
of my personal
made some progress.
was complaining about unresolved libuser32 and libkernel32.\
I found the libraries under /usr/lib/win32 and did a symbolic link in /usr/lib
Now it has come to the point of linking and now it complains
/usr/lib/libcygwin.a(libcmain.o)(.text+0x7c): undefined reference to
- Original Message -
From: Mikhail Teterin [EMAIL PROTECTED]
To: Timothy C Prince [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Saturday, December 21, 2002 6:47 AM
Subject: Re: poor performance -- is Cygwin to blame?..
In my experience with MPI programs, comparing cygwin and linux,
ROTFL!
What can I say besides open mouth, insert foot?
On Sat, 2002-12-21 at 12:07, Randall R Schulz wrote:
David,
Now I'm a big Linux proponent and only currently wed to Windows by a quirk
of my personal employment history, but never did I realize that rebooting a
Linux system would
On Sun, 2002-12-22 at 04:55, Christopher Faylor wrote:
Didn't you suggest that anything in a library residing in /usr/lib or
/usr/local/lib be excluded? That's not quite the same thing as what
I was musing about. I was talking about marking individual symbols.
Ah, ok. oops.
(goes and
How do I run a program that I built with gcc under Cygwin in Windows? When
I try to run them, it says it can't find cygwin1.dll.
--
John Seeliger Limited but increasing content
[EMAIL PROTECTED] http://www.freewebz.com/hudathunkett/
[EMAIL PROTECTED]
--
On Sat, 21 Dec 2002, John Seeliger wrote:
How do I run a program that I built with gcc under Cygwin in Windows? When
I try to run them, it says it can't find cygwin1.dll.
Make sure c:\cygwin\bin is in your PATH. Another alternative is to use
the mingw runtime by giving gcc the -mno-cygwin
John,
Cygwin is a POSIX emulation environment for Windows. By default, the C /
C++ compiler, linker and libraries all supply some portion or aspect of
that emulation and the primary runtime component of the emulation is the
Cygwin1.dll.
If you want to create Windows-native applications using
Note that Cygwin, like Unix, doesn't have a concept of
volume. Everything except network paths (//host/dir) are
based on a single root directory.
---
But Unix does have a concept of a mount point (device) and
path from the mount point. Conceivably, one could view the
mount point
Howdy all!
In the old days of libg++ there was something called GetOpt to help
parse command line options. In these days of stdlibc++ it seems to be
gone.
What are well-dressed C++ programmers using to parse their command
lines these days?
Thanks!
Ed
--
Unsubscribe info:
Hi,
I log in fine, and get my prompt and everyting. sshd rocks!
I'm trying to do e.g.:
me@othermachine : ssh winmachine word.sh some.doc
And have the word GUI appear on the machine it is actually running. I'm
aware, of course that X-forwarding wont work
Here word.sh contains:
On Sat, 21 Dec 2002 17:36:58 -0800 linda w (cyg) [EMAIL PROTECTED] wrote:
Note that Cygwin, like Unix, doesn't have a concept of
volume. Everything except network paths (//host/dir) are
based on a single root directory.
---
But Unix does have a concept of a mount point (device)
I'm trying to run Exim, but with both 4.10 from Cygwin and the
4.11 I compiled I get Format error in spool file in the log
when I send an e-mail. Exim works fine on Linux with the same
exim.conf, available at http://pervalidus.port5.com/exim.conf
(I had to comment the first two lines starting with
On Sat, 21 Dec 2002, Pierre A. Humblet wrote:
At 01:07 AM 12/22/2002 -0200, Frédéric L. W. Meunier wrote:
I'm trying to run Exim, but with both 4.10 from Cygwin and the
4.11 I compiled I get Format error in spool file in the log
when I send an e-mail. Exim works fine on Linux with the same
At 01:58 AM 12/22/2002 -0200, Frédéric L. W. Meunier wrote:
2) Looking at the source code, this error message should include
the name of a file. Have you looked at that file?
Send it me as an attachment if you don't see anything obvious.
Attached (very small files).
It looks like your cygwin
On Sat, 21 Dec 2002, Pierre A. Humblet wrote:
At 01:58 AM 12/22/2002 -0200, Frédéric L. W. Meunier wrote:
2) Looking at the source code, this error message should include
the name of a file. Have you looked at that file?
Send it me as an attachment if you don't see anything obvious.
Randall R Schulz [EMAIL PROTECTED] writes:
Hello there, Edward, if that is your real name.
No, it's an alias.
However, my real name is, coincidently, Ed.
Here's how it is, Ed...
Real Programmers (tm) code to the bare metal. They don't use no
stinkin' libraries. If you can't decode your
Greetings, Earthling,
At 20:59 2002-12-21, Ed wrote:
Randall R Schulz [EMAIL PROTECTED] writes:
Hello there, Edward, if that is your real name.
No, it's an alias.
However, my real name is, coincidently, Ed.
Got it. Plausible deniability. Or is it deniable plausibility?
Here's how it
Does it mean that this problem have no solution?
Sure somebody hit this wall before.
Thanks
Genady
From: Vince Hoffman Vince dot Hoffman at uk dot circle dot com
To: cygwin at cygwin dot com
Date: Fri, 20 Dec 2002 12:28:41 -
Subject: RE: permission denied for NTFS network shares
Just stick cygwin1.dll in your windows\system32 folder.
-Original Message-
From: John Seeliger [mailto:[EMAIL PROTECTED]]
Sent: Saturday, December 21, 2002 6:41 PM
To: [EMAIL PROTECTED]
Subject: Running cygwin built programs in Windows XP
How do I run a program that I built with gcc
-Original Message-
From: Alexander Gottwald
Subject: Re: xhost configuration
Booker wrote:
I have to always type xhost - so that I can get:
access control enabled, only authorized clients can connect
How is XWin started. Maybe with the -ac parameter? Or is
xhost called
Booker wrote:
I took at look at the docs
http://xfree86.cygwin.com/docs/ug/configure-cygwin-xfree-options.html
and there is no mention of the -ac parameter.
The page does only describe the options that are specific to XWin. The
default parameters are described in the Xserver manpage.
Nor
Hi,
Thank you Christopher for reviewing all these tty patches.
Here's the next one. It introduces an echo buffer that doecho
will eventually use. As nothing yet puts characters into the
echo buffer, this patch should not have any noticeable effect.
Thanks,
-steve
ChangeLog
2002-12-21 Steve
41 matches
Mail list logo
