Re: [darktable-user] tint after editing

2017-02-18 Thread Roman Lebedev
On Sat, Feb 18, 2017 at 5:11 PM, Steven Fosdick wrote: > Michael, > > I get the same values Maurizio got for the camera white balance. if, when > you open the image, before changing any of the controls in the white balance > module such as the tint slider, do you find

Re: [darktable-user] tint after editing

2017-02-18 Thread Steven Fosdick
Michael, I get the same values Maurizio got for the camera white balance. if, when you open the image, before changing any of the controls in the white balance module such as the tint slider, do you find the red, green and blue sliders are all at 1.0? What about the white balance preset - is

Re: [darktable-user] tint after editing

2017-02-18 Thread Maurizio
If I upload your NEF file and set the white balance to 'camera' the settings are the following: - tint 1.001 - temperature 4775K - red 2.012 - green 1.000 - blue 1.383 an all these data comes from EXIV data in your file. Is it the same for you? Maurizio In data sabato 18 febbraio 2017 08:31:53

Re: [darktable-user] tint after editing

2017-02-18 Thread Maurizio
Sorry, my explanation was not good. If I load your NEF file to dt it is all OK but white balance module is ON. If I switch white balance module OFF the result is exactly the same of your green image. So, please check if your white module is ON and if you have selected the appropriate white

Re: [darktable-user] tint after editing

2017-02-18 Thread Michael
how do you mean? I just open it with dt and the white balance is on. I don't know how to start it with the module inactive. On Sat, Feb 18, 2017 at 8:17 AM, Maurizio Paglia wrote: > Ciao Mike, > I downloaded your NEF file, opened in dt and switched OFF the white > balance

Re: [darktable-user] tint after editing

2017-02-18 Thread Michael
I then tried turning it off but that had no effect on any of the images. On Sat, Feb 18, 2017 at 8:02 AM, Michael wrote: > I didn't activate the module. I just opened and saved. > > > On Sat, Feb 18, 2017 at 7:55 AM, Maurizio Paglia > wrote: > >> Did you

Re: [darktable-user] tint after editing

2017-02-18 Thread Michael
I didn't activate the module. I just opened and saved. On Sat, Feb 18, 2017 at 7:55 AM, Maurizio Paglia wrote: > Did you checked the white balance? > Maurizio > > Il 18 feb 2017 13:13, "Michael" ha scritto: > >> why is it that after editing there is a

Re: [darktable-user] tint after editing

2017-02-18 Thread Maurizio Paglia
Did you checked the white balance? Maurizio Il 18 feb 2017 13:13, "Michael" ha scritto: > why is it that after editing there is a tint? Sometimes on the maroon side > and sometimes on the purple side.There must be a setting or something. > > -- > :-)~MIKE~(-: > >

[darktable-user] tint after editing

2017-02-18 Thread Michael
why is it that after editing there is a tint? Sometimes on the maroon side and sometimes on the purple side.There must be a setting or something. -- :-)~MIKE~(-: darktable user mailing list to unsubscribe send a mail