Hi,
I'm trying to get phpmyadmin to work with apache2 but without success. I
have installed and, as far as I know, configured everything correct.
When I try to load the phpmyadmin start page I get the following message
in the browser:
Internal Server Error
The server encountered an internal
Am Dienstag, 4. Januar 2005 17:57 schrieb David Liontooth:
The problem is fixed in 1:3.6.1-2 (not in amd64 yet?) -- or you could
comment out these lines in /var/lib/dpkg/info/gv.postinst and reinstall:
if [ $1 = configure ]; then
install-info --quiet --section Viewers Viewers
On (05/01/05 10:51), Andree Zeulner wrote:
Am Dienstag, 4. Januar 2005 17:57 schrieb David Liontooth:
The problem is fixed in 1:3.6.1-2 (not in amd64 yet?) -- or you could
comment out these lines in /var/lib/dpkg/info/gv.postinst and reinstall:
if [ $1 = configure ]; then
Hi all,
first of all: great job, many thanx for all efforts. I had the amd64 port
running in two hours, including downloading and burning the 145MB install
disk.
Ok, today I've installed chroot according to the HOWTO, and this mostly
worked. I found a few things different from the HOWTO, so
Hi all.
I'm running the gcc-3.4 distro, on a dual opteron motherboard.
Since Monday (Jan 3) this machine has been crashing randomly and I
can't find a pattern to why this happens. The 3 times it has crashed,
it was always running a X session so I can't even get to the console
and look at the
Manuel Capinha wrote (ao):
I'm running the gcc-3.4 distro, on a dual opteron motherboard.
Since Monday (Jan 3) this machine has been crashing randomly and I
can't find a pattern to why this happens. The 3 times it has crashed,
it was always running a X session so I can't even get to the
On Wed, Jan 05, 2005 at 01:23:27PM +, Manuel Capinha wrote:
The machine is using a TIGER K8w motherboard, 2 Opteron CPUs, 1Gb of
RAM on 2 DDR sticks and 2 Seagate SATA harddrives running on RAID 1.
I suppose you're running a 2.6 kernel. If the board has a Silicon Image
SATA chip and you're
Yup, I'm tempted to blame it on hardware, but it's just weird that it
started to happen a few minutes after the dist-upgrade.
I ran memtest yesterday, just for one quick pass. I'll try leaving it
running overnight today, see if it finds any errors.
Karl Hoppel wrote me offlist with some
On Wed, Jan 05, 2005 at 01:23:27PM +, Manuel Capinha wrote:
When the machine crashes it just freezes: all input is ignored. Mouse,
keyboard, networking nothing works... the machine is just dead in the
water :/
Mmmm... its taste is hardware problem
try a memtest86, try another videocard or
I wrote:
[...]
Therefore it seems to me that the binary package in the gcc-3.4 archive
is somehow miscompiled. My g++ version is 3.4.3-1. What g++ version was
used to compile the original package?
I have now installed g++-4.0 (version 4.0-0pre1.0.0.1.gcc4). When I
recompile libqt3c102-mt with
On 05-Jan-05 15:27, Michal Schmidt wrote:
I have now installed g++-4.0 (version 4.0-0pre1.0.0.1.gcc4). When I
recompile libqt3c102-mt with it, the problem appears again.
So I think that g++-4.0 miscompiles libqt3c102-mt.
Thank you for your report and your investigation. Could you try to
Hello all,
The locales-package in the pure64-repository seems to be broken. It
claims to depend on a package named glibc-2.3.2.ds1-19 which doesn't
exist. Shouldn't it be libc6-2.3.2-ds1-19?
On 05-Jan-05 17:30, Michal Schmidt wrote:
Andreas Jochens wrote:
Thank you for your report and your investigation. Could you try to
recompile libqt3c102-mt again with 'gcc-snapshot' which is gcc-4.0
version 20041231?
Done. Unfortunately that's even worse. Now even texts in all top-window
Hi,
Sythos [EMAIL PROTECTED] wrote:
I read on kernel 2.6.10 changelog that 32bit emulation is widely
improved...
This change something in amd64 situation?
using that kernel I had the problem that mplayer-32bit (from marillat)
totally freezes up my system. No matter if called from the chroot
Dear List,
I have Abit A8V motherboard. It has on-board VIAK8T800Pro chipset for IDE.
I have Debian AMD64 (kernel with 2.6.9-8, sarge) installed to SATA disk.
It runs nicely except I had to install modules psmouse, nvidia to
/etc/modules to get them loaded automatically during bootup.
I added a
On Wed, Jan 05, 2005 at 07:19:44PM +0200, Matti-P.Sar?n wrote:
Dear List,
I have Abit A8V motherboard. It has on-board VIAK8T800Pro chipset for IDE.
I have Debian AMD64 (kernel with 2.6.9-8, sarge) installed to SATA disk.
It runs nicely except I had to install modules psmouse, nvidia to
Mainboard ATAATA-Raid Serial ATA SCSI Network Sound
---
ASUS K8N-E Deluxe nforce - sata_sil- forcedeth ?
regards,
Dirk
--
_
evolution --force-shutdown
Still the same problem.
TWISTI
On 05-Jan-05 19:20, Michal Schmidt wrote:
I got one more idea.
I installed the binary libqt3c102-mt again (the one that was compiled
with g++-4.0 and gave me the problems the Plastik widget style).
I also downloaded the kdeartwork source package (in includes the Plastik
theme) and compiled
Lennart Sorensen wrote:
On Wed, Jan 05, 2005 at 07:19:44PM +0200, Matti-P.Sar?n wrote:
Dear List,
I have Abit A8V motherboard. It has on-board VIAK8T800Pro chipset for IDE.
I have Debian AMD64 (kernel with 2.6.9-8, sarge) installed to SATA disk.
It runs nicely except I had to install modules
stupid bcc, twice now I've done that
Forwarded Message
From: Jacob [EMAIL PROTECTED]
To: Martin Kos [EMAIL PROTECTED]
Bcc: debian-amd64@lists.debian.org
Subject: Re: snmpd network intefaces not displayed
Date: Wed, 05 Jan 2005 10:10:55 -0800
I'm seeing something simalar
On Wed, Jan 05, 2005 at 09:06:11PM +0200, Matti-P.Sar?n wrote:
Thank you for quick answer!
I had to load kernelmodule ide-disk to access PATA drives manually.
I think that you are right Len.
The ide controller of this motherboard, however, is not nvidia (the
kernel module is for
Hi!
I suppose the mirror
http://mirror.phy.bnl.gov/debian-amd64/dists/sarge/
isn't sarge but sid.
Can someone acknowledge this?
Is this deliberate?
(It seems I installed the wrong dist, normally I'm a stable
fetishist, but anyway, this sid works like a charm on my
athlon64fx. Thanks to all
Hi Steffen,
Steffen Schwigon [EMAIL PROTECTED] writes:
I suppose the mirror
http://mirror.phy.bnl.gov/debian-amd64/dists/sarge/
isn't sarge but sid.
Can someone acknowledge this?
Is this deliberate?
That's mine but I just blindly rsync from:
On Wed, Jan 05, 2005 at 10:16:08PM +0100, Steffen Schwigon wrote:
Hi!
I suppose the mirror
http://mirror.phy.bnl.gov/debian-amd64/dists/sarge/
isn't sarge but sid.
Yes, that's the pure64 archive, and it only has sid in it atm,
and sarge is a symlink to sid.
Kurt
Hi,
Sythos [EMAIL PROTECTED] wrote:
I read on kernel 2.6.10 changelog that 32bit emulation is widely
improved...
This change something in amd64 situation?
using that kernel I had the problem that mplayer-32bit (from marillat)
totally freezes up my system. No matter if called from
Aritz Beraza Garayalde [Rei] wrote:
Hi,
Sythos [EMAIL PROTECTED] wrote:
I read on kernel 2.6.10 changelog that 32bit emulation is widely
improved...
This change something in amd64 situation?
using that kernel I had the problem that mplayer-32bit (from marillat)
totally freezes up my
Aritz Beraza Garayalde [Rei] wrote:
If you google a bit, you'll be able to find some amd64 packages for
mplayer, also from marillat. Unfortunately last time i checked, there
was no debian repository, so you can't install them by adding a few
lines to your sources.list and using apt. You'll have to
On Thu, Jan 06, 2005 at 02:30:27AM +0100, Aritz Beraza Garayalde [Rei] wrote:
If you google a bit, you'll be able to find some amd64 packages for
mplayer, also from marillat. Unfortunately last time i checked, there
was no debian repository, so you can't install them by adding a few
lines to
Hey,
If you google a bit, you'll be able to find some amd64 packages for
mplayer, also from marillat. Unfortunately last time i checked, there
was no debian repository, so you can't install them by adding a few
lines to your sources.list and using apt. You'll have to get all
needed packages
Hi,
I noticed that there is no alsa variant built in libesd (i.e.
libesd-alsa0). It seems just a matter of editing the control file and
adding amd64 to the architecture specific builds. It seems to work fine
on my system. How does one push this change upstream?
Also it seems that vncserver just
31 matches
Mail list logo
