hi everyone ive just installed deb sarge on a nice 1ru dual opteron. everything went smoothly, however im not getting the dual broadcom nics for some reason.
they are without a doubt there, i just think that the driver doesnt recognise the pci id. (these cards should be BCM57xx, using the tg3 driver) lspci 02:03.0 Ethernet controller: Broadcom Corporation Unknown device 0000 (rev 03) 02:03.1 Ethernet controller: Broadcom Corporation Unknown device 0000 (rev 03) there they are lspci -n -v 02:03.0 0200: 14e4:0000 (rev 03) Subsystem: 1022:36c0 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 9 Memory at fe9b0000 (64-bit, non-prefetchable) [size=64K] Memory at fe9a0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at fe990000 [disabled] [size=64K] Capabilities: <access denied> 02:03.1 0200: 14e4:0000 (rev 03) Subsystem: 1022:36c0 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11 Memory at fe9d0000 (64-bit, non-prefetchable) [size=64K] Memory at fe9c0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> i have run update-pciids, but a manual search shows that 14e4:0000 is not at all recognised!? i also tried building the old driver module-assistant build ok, but wont load into the 2.6.17 kernel =\ any thoughts on it? Dean -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]