Re: [Ceph-maintainers] Bug#850906: ceph FTBFS on armel, libtool/linker related issues.

peter green writes: > Package: ceph > Version: 10.2.5-5 > Severity: serious > x-debbugs-cc: debian-arm@lists.debian.org > > The most recent upload of ceph fixed the build on most architectures but > unfortunately armel is still failing. > > libtool: relink: g++ -fPIC

Help need with build failure of ceph 10.2.5-2 on armel

Hi The build of the most recent version of ceph fails on armel[1]. As far as I understand the log, the first failure (a bit above the end of the log) is because armel does not support NEON (-mfpu=neon) despite the configure check for this succeeding. The autotools based build system uses the

Re: Cubox-i 4x4 RAM [was Re: Performance of armhf boards]

Vagrant Cascadian writes: > [ Unknown signature status ] > On 2016-04-24, Rick Thomas wrote: >> Any chance I could download a pre-built binary? > > Just uploaded u-boot 2016.05-rc2 packages to: > > deb http://cascadia.debian.net/~vagrant/debian UNRELEASED main > > The

Re: arm, both disk able to boot (raid1)

rosea.grammostola rosea.grammost...@gmail.com writes: Hi, When the 1st raid disk (which is able to boot) fails, an other method to restore the system might be to mount the 2nd disk (which isn't able to boot), on the laptop and make it able to boot via chroot right? There is no need for

Re: Odd ownership of files in tarball [Re: Debian 5.0 (lenny) tar ball for the SheevaPlug - USB install]

On Mon, May 18, 2009 at 08:28:03PM -0400, Rick Thomas wrote: On May 8, 2009, at 11:09 AM, Rick Thomas wrote: Cool! My first shivaplug arrived this morning. It's now installed and doing useful work. A fairly painless process -- thanks very much for the step-by-step instructions, Martin!

Re: versatile architecture image suitable for qemu usage?

Hi On Thu, Jan 08, 2009 at 11:35:22PM +0900, Junichi Uekawa wrote: Hi, I tried to test qemubuilder armel support and realized that I don't have the latest kernel. initrd isn't distributed inside a package, and I don't think there's a kernel which doesn't work without a initrd. Is

Re: Ralink

On Fri, Aug 29, 2008 at 10:54:32AM +0200, Xan wrote: Hi, I have attached to slug a hub of 4 ports and in one port I plug a net usb key. This key has ralink driver kernel detects it (you can show that in dmesg), but it does not put any interface (I have only eth0 and lo). What can I

Re: mail (local mail)

Hi Xan On Fri, Aug 29, 2008 at 04:24:29PM +0200, Xan wrote: Hi, Recently I drop exim4 packages (# apt-get remove exim4 exim4-base exim4-config exim4-daemon-light) and so it removes at and bsd-mailx. Now I haven't mail. But I want having mail for simply: - read /var/mail - when

Re: XFS is unsafe (Was: Re: d-i does not show jfs in partition tool)

On Wed, Aug 27, 2008 at 06:08:24PM +0300, Martin Michlmayr wrote: * Gaudenz Steinlin [EMAIL PROTECTED] [2008-08-27 17:05]: The ARM XFS fix that got into 2.6.27 is also in our 2.6.26 kernel. However, if you want to try 2.6.27-rc4, I can build it for arm. I tested with 2.6.26-3 from

Re: XFS is unsafe (Was: Re: d-i does not show jfs in partition tool)

Hi On Wed, Aug 27, 2008 at 10:02:57AM +0200, Tobias Frost wrote: So now I have a image prepared, which I can upload somewhere on request. (approx 26 MB gziped) As building the image, I had the impression that the corruption occured when I deleted some files. Can someone please try the

Re: XFS is unsafe (Was: Re: d-i does not show jfs in partition tool)

On Wed, Aug 27, 2008 at 01:19:13PM +0300, Martin Michlmayr wrote: * Gaudenz Steinlin [EMAIL PROTECTED] [2008-08-27 11:56]: I can confirm the corruption also happens on my Thecus N2100 running kernel 2.6.24 with the DMA patches from Dan Williams. I've noticed that some XFS fixes got

Re: Munin

On Fri, Jan 11, 2008 at 12:32:42PM +0200, Salvatore Iovene wrote: On Fri, Jan 11, 2008 at 11:04:38AM +0100, Gaudenz Steinlin wrote: the quintessence is that you need softfloat either by building your own softfloat libraries (like Eddy did) or you need to swith to armel which is softfloat

Re: Munin

On Fri, Jan 11, 2008 at 10:46:13AM +0200, Salvatore Iovene wrote: Hi, does anyone here successfully run munin or mtrg on a N2100? I first tried on my NSLU-2 and then on the Thecus, but for both of them it seems that the CPU power is not enought for rrdtools. Infact, I found that munin-graph

fan control on thecus n2100

Hi With kernel 2.6.23 the F75375 driver for the fan control was updated. AFAICS it should now support automatic fan control, but I did not suceeed in enableing it. Is there any documentation for the files in /sys/devices/platform/IOP3xx-I2C.0/i2c-adapter\:i2c-0/0-002e/ How can I set the fan