* Marco d'Itri m...@linux.it [2010-08-12 16:24]:
Can anybody comment on this?
I can add ppp-modules for armel.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
purposes.
Since you intend to install to a SATA disk, is there a reason you
cannot put /boot on the SATA disk? This would work out of the box
with the Debian installer (including encryption).
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ
for this device, you'd have
to get OXE810 support into the mainline kernel. However, you can
install Debian with your own custom kernel, see
http://wiki.debian.org/DebianInstaller/Arm/OtherPlatforms for some
information.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email
* Stefan Peter st3fanp3...@gmail.com [2010-07-23 12:38]:
This did not work. Neither linux-image-2.6.32-5-kirkwood from unstable
It does. You probably just have to run
flash-kernel
after installing it. Sorry for forgetting to mention that.
--
Martin Michlmayr
http://www.cyrius.com
so it seems that it really hangs. I haven't had time to
investigate yet.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org
* Martin Michlmayr t...@cyrius.com [2010-07-24 00:20]:
I can reproduce this partly. I don't get the fsck problem but my boot
process also doesn't complete. I checked /etc/inittab and this looks
fine so it seems that it really hangs. I haven't had time to
investigate yet.
This is the same
. So after the installation is done, you have to use the
installer kernel from TFTP and the ramdisk from your installed system
(hard drive, USB) to boot into Debian and then you can manually
install the kernel from unstable.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email
(login on the serial console gets activated towards the
end of the instalation).
I suggest you perform a new installation and complete it to the end.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe
because we're working on a new release.
I'll add a note to my web site.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org
that moving the
armel port to armv5 and proving optimized libraries for some things
might be the way to go.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive
.
Maybe it would be good to implement this feature directly in the
debian installer.
You should be able to install to a USB drive without any problems
using the Debian installer.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
in the bootcmd_sata variable:
Marvell print bootcmd_sata
bootcmd_sata=ide reset; ext2load ide 0:1 0x110 /uInitrd; ext2load ide 0:1
0x080 /uImage
^^^ ^^^
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE
* Hector Oron hector.o...@gmail.com [2010-07-14 22:54]:
I would recommend you tag the bug as 'wontfix', as Debian does not fix
stable release, but only provides security updates on the stable
release.
That's not true. We can fix critical issues in stable too.
--
Martin Michlmayr
http
/HowToRebuildAnOfficialDebianKernelPackage
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20100709075306.gg13
.
But apart of these issues, the installation should work fine. You
just have to be patient.
I'll add a note to my web page.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
this was a temporary problem because some changes I made
were not in the Debian archive yet. It should work now.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive
* Josh Abbott josh.k.abb...@gmail.com [2010-07-04 20:01]:
The full output is here:
http://codepaste.net/m45fa9
16: Marvell bootm 0x0080
17: ## Booting image at 0080 ...
This is not the correct boot command. You need:
bootm 0x0080 0x0110
--
Martin Michlmayr
http
in the meantime:
http://people.debian.org/~joeyh/d-i/armel/images/daily/
(But do not make a RAID with the daily image; your machine won't boot.)
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
that the MAC address is not correct, otherwise you shouldn't
get the error message.
What's the output of:
ifconfig
iface_get_mac eth0
get_mac
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble
* John Reiser ven...@bitwagon.com [2010-06-20 16:12]:
In 2006 it was literally minutes on an NSLU2 [low-memory mode.]
Yes, I can believe that but the TS-209 is a much more powerful device
than the NSLU2.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ
).
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20100621084342.gb2...@jirafa.cyrius.com
* Andrew McGlashan andrew.mcglas...@affinityvision.com.au [2010-06-21 20:08]:
There was a severe problem with bind9 on mips but that got fixed
(#516616).
Is this the same thing or a different one?
Yep, it's that bug, which eventually got fixed.
--
Martin Michlmayr
http://www.cyrius.com
whether there are any processes that use
up a lot of cpu or memory?
In any case, please send the above desription of the problem to
debian-b...@lists.debian.org since -boot has more people who can help
debug debian-installer issues.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE
you want to
enter the installer or open a shell.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20100621224248.gm17
'
setenv bootcmd 'setenv bootargs $(bootargs_console); run bootcmd_sata; bootm
0x0080 0x0110'
saveenv
run bootcmd
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
I noticed that one sentence was unclear:
* Martin Michlmayr t...@cyrius.com [2010-06-20 14:09]:
I've also ported the graphical Debian installer to ARM based on the
OpenRD-Client.
Eh, ported to ARM sounds more than it really means. I just had to
make sure we have the right fb drivers
again?
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20100620152201.gg4...@jirafa.cyrius.com
manager, or after configuring a
partition. Is there room for improvement here, or is the machine
just that slow?
Shouldn't be that slow. Is it literally _minutes_ for each step?
Does this happen with all screens or only with the partitioner/RAID
config?
--
Martin Michlmayr
http://www.cyrius.com
believe the KURO-SHEEVA should work in Debian now if you follow the
installation instructions for the eSATA SheevaPlug.
Can you please try the installer on your KURO-SHEEVA and tell us
whether it works?
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ
into any problems. If
it works, I'll update my web page accordingly.
7) Thanks
Thanks to John Holland for working on SheevaPlug eSATA support.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
. If
it works, I'll update my web page accordingly.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20100608105743.ga9
to the root partitions on the USB stick and disk. This way, you can
put one in and it'll boot from that.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http
.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20100528144431.gf1...@jirafa.cyrius.com
support built-in so you should be able to simply read a
kernel from the filesystem. (Maybe I'm wrong about this; I don't have
a GuruPlug.)
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20100528155343.gc3...@jirafa.cyrius.com
use the files for the installer to boot your regular system.
I suggest you perform another installation, possibility choosing
another mirror. If you still get the same errors, please send
/var/log/syslog from the installer.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email
. Out of interest, what's the output of
'printenv' from your machine at the moment and what kernel did your
GuruPlug ship with? (something based on 2.6.20 or so?)
Anyway, you need:
setenv mainlineLinux yes
setenv arcNumber 2659
saveenv
reset
--
Martin Michlmayr
http://www.cyrius.com
compiled into the Kirkwood kernel, so
you don't need an initramfs at all.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org
/mtdblock4 /dev/mtdblock5 /dev/mtdblock1
/dev/mtdblock2 /dev/mtdblock3 recovery
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org
untested (I quickly booted the Kirkwood image on a
QNAP TS-219 but that's it). Make sure to install linux-base before
(or at the same time as) linux-image.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble
yesterday. So hopefully the
kernel will move to squeeze soon and then we can update the installer.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive
* Martin Michlmayr t...@cyrius.com [2010-05-16 15:34]:
You're the second person with this problem this week. The problem is
that 00:00:00:00:05:09 is not the MAC address your device should have.
It should start with 00:08:9B.
For the record, I've identified the root cause of this problem
it, but I'm pretty much willing to
experiment if somebody wants to try an idea with me. Thanks.
I've been playing with a t5325 the last two days and have some ideas
for you. I'll respond to your original message either today or
tomorrow.
--
Martin Michlmayr
http://www.cyrius.com
. Can you explain some more how LTSP works exactly?
In any case, creating a custom Debian ARM image and replacing the OS
shouldn't be too much work. But a serial console will come in very
handy in case it doesn't boot the first time.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE
* David Hautbois david.hautb...@free.fr [2010-05-11 22:55]:
For sure, it does not include the PROPRIETARY IXP4xx microcode.
Maybe it includes a replacement...
There's no free replacement for the ixp4xx microcode.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian
simply take the installer from debian.org and add the
microcode: http://cyrius.com/debian/nslu2/repack.html
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive
be able to give you access to
the DB-78x00-BP development board.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20100509115345
.
In any case, we have pretty good contacts at Marvell so if anyone has
a testcase (ideally a smaller one than run yorick) we can forward it
to them.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble
suggest you ask
about this on the http://groups.google.com/group/openrd list
(employees from the OpenRD manufacturer are subscribed to and active on
the list). If a kernel patch is needed, I can include it in the
Debian kernel.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email
reset. I'll fix that, thanks!
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20100509121106.gi12...@jirafa.cyrius.com
instruction
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20100509133752.gt12...@jirafa.cyrius.com
; ext2load mmc 0 0x0110 /uInitrd;
ext2load mmc 0 0x0080 /uImage'
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org
-initramfs -u
What does this step do?
It will update the name of the root partition in the ramdisk.
In any case, bootargs_root doesn't hurt.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble
The main Debian keys usually come in packages which can be installed.
Is there a similar way I can get this one?
Run these commands:
gpg --keyserver pgp.earth.li --recv-keys 68FD549F
gpg --export -a 68FD549F | apt-key add -
I'll add that to the web page.
--
Martin Michlmayr
http://www.cyrius.com
with the new 2.6.32-2 uImage and uInitrd.
I've had to rename them out of the way and put the 2.6.30-2 ones back.
What's your version of u-boot? (type version in u-boot to find
out).
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with an explicit root= parameter (for
your new root partition) and run
update-initramfs -u
Then everything should be fine.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
Ethernet.
Did you try the suggestions at
http://www.cyrius.com/debian/nslu2/troubleshooting.html#no-boot
to find out what's going on?
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
adding support to Debian.
Here's a good guide that shows you what needs to be done:
http://hezmatt.org/~mpalmer/blog/general/porting_d-i_to_the_dns_323.html
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20100313100306.gf16...@jirafa.cyrius.com
* Lluís Batlle virik...@gmail.com [2010-03-10 22:41]:
The plugcomputer.org wiki or places like that will give you
information on how to do that.
Exactly. Search for installer v1.0.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
it fails, please open a shell (last
but one entry in the menu) and take a look at /var/log/syslog
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http
that the root device is
$rootdev 2
pause_error
fi
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20100303124307.gc1
* Holland, John john.holl...@cellent-fs.de [2010-02-26 08:38]:
The kernel patches are now available in Marvell's orion-git:
http://git.marvell.com/?p=orion.git;a=summary
Yeah, I saw it. I'm travelling at the moment but I'll add it next
week or so.
--
Martin Michlmayr
http://www.cyrius.com
the USB modules if you install Debian on USB.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20100225223534.gb7
the problem?
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20100224175711.ga18...@jirafa.cyrius.com
fine =)
This thread [1] has a patch to enable UART1 by disabling the SDIO with
a boot parameter; it would be nice if it could be ported to debian
and/or upstream.
I'll put the patch into the squeeze kernel.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm
* John Holland john.holl...@cellent-fs.de [2010-02-19 23:25]:
Supplement the debian flash-kernel package with support for the eSATA
SheevaPlug hardware.
Thanks. Let's wait and see first what the kernel people say.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email
the option for the next upload since
there's no reason it's not enabled.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20100218164222
will work fine on the TS-419P so I suggest you grab that
kernel from unstable. I'll also put it into the Orion repo in the
near future.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
. Re-installing, and only attaching firstly the one disk
fixed the problem.
You've to change some configs if you want to use more than one disk:
http://www.cyrius.com/debian/nslu2/tips.html#uuid
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ
in the installer that would cause it not to
start with some network configs but this should no longer be the case
with lenny. Your best bet is to connect a serial console and see
what's actually going on.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ
your kernel in both cases. If you just
want a development environment, Debian will work out of the box on the
OpenRD.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
* Paul van der Vlis p...@vandervlis.nl [2010-02-06 12:51]:
Is the original firmware Linux, and is the sourcecode downloadable?
Yes, it can be obtained from qnap.com.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject
on this list?
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
fauSegmentation fauSegmentation fauSegmentation
---8--
Maybe there is an older, working image? Any other hints?
I can reproduce this. I'll file a bug. In the meantime, the
workaround is not to use DEBIAN_FRONTEND=text
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email
not.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
* Paul van der Vlis p...@vandervlis.nl [2010-02-01 16:42]:
Is it possible to do a schedule power on with the QNAP TS-110 and
Debian Squeeze?
Not at the moment. I hope someone will implement it, though.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ
* Adi l...@quecksilber.ch [2010-01-25 20:54]:
I am checking if it is included. But if it is, I can upgrade the
kernel without upgrading the dist, can't I?
Yes, you can. Just download the .deb from testing, install it with
dpkg -i and run flash-kernel.
--
Martin Michlmayr
http
or another soon.
Thanks.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
getting as
far as mounting /.
I believe this has been fixed in the latest upload. Would you mind
trying again?
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
the logs from /var/log/installer/ available
somewhere? Also, how big is the disk?
I think I partitionned the external SATA drive on a PC before I
innstalled debian on it.
So did you install to the internal or external disk?
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE
/kirkwood/qnap/ts-219/
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
higher since Debian runs from disk so they cannot spin
down as much as with the original OS which runs in flash.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
will assume sda2 as
root device when it cannot find the UUID).
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Can you go into u-boot and send me the output of printenv?
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
TFTP or is there a
solution to boot the previous kernel ?
Copy /boot/uImage.bak to /boot/uImage and /boot/uInitrd.bak to /boot/uInitrd
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
* Geoff Parker geof...@gmail.com [2009-12-31 15:31]:
My kernel was recently updated with aptitude.
Do you remember to which version it was updated? I don't see a new
version in squeeze.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ
debian-arm in the
hope that someone with a serial console can try 2.6.32-3 and report
the failure.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
for the
kirkwood. I actually need a kernel version later than 2.6.30.xx
since the driver for my wireless USB stick (RTL8187 based) now
claims to support Master mode. Any hints on getting the plug to load
and boot into that kernel?
Yeah, run:
flash-kernel 2.6.32-trunk-kirkwood
and reboot.
--
Martin
netconsole
enabled, so I haven't been able to view the boot messages. Logfiles
(e.g. dmesg.log) aren't being touched, so I guess it isn't getting as
far as mounting /.
Thanks,
Ryan
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
that you
reach state 5 (i.e. it's blinking slowly) I don't think that would
help.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
before, with the same result: rc8 works,
2.6.32-trunk-kirkwood doesn't work anymore :-/
I just tried 2.6.32-trunk-kirkwood on my TS-419P and it boots just
fine.
Can you try the bootlogd trick documented at
http://www.cyrius.com/debian/nslu2/troubleshooting.html#no-boot
--
Martin Michlmayr
http
haven't tested 2.6.32-1 yet but I don't see why it shouldn't work
(especially given that rc8 worked). Can you try the 2.6.32-1 from the
Debian archive? If it doesn't work, I'll take a look.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ
USB or TFTP?
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
page about this at
qnap.nas-central.org so I can link to it?
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
on this?
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
. It probably makes sense to add a
separate platform file for the KURO-SHEEVA but I don't know any
details about this device so I cannot say for sure.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble
the builtin kirkwood sata
controller to the current sheevaplug platform?
Well, I suspect it will cause more power consumption.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
.
flash-kernel expects the kernel to end in -kirkwood. Rename
2.6.32-rc8 to 2.6.32-rc8-kirkwood and it should work.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
301 - 400 of 1007 matches
Mail list logo
