* Arnaud Patard [2019-08-02 10:58]:
> Sorry for the delay. I was waiting for some feedback before sending and
> then got busy with other stuff. I've now sent it:
> https://marc.info/?l=linux-netdev=156473570707976=2.
For the record, this has been accepted and queued for stable:
reassign 933294 QNAP TS-109 (orion): ttyS / PIC communication fails
thanks
* Ian Campbell [2019-08-07 20:04]:
> > I believe your analysis is correct. This sounds very similar to what
> > I saw on a TS-x09 in the past.
>
> Sounds like this is more a kernel issue than a qcontrol one? Shall we
>
On Sun, 2019-08-04 at 15:51 +0200, Martin Michlmayr wrote:
> Copying the relevant Debian bug (#933294).
>
> * Matthieu CERDA [2019-08-04 15:42]:
> > In dmesg during boot, which I suspect means that something is wrong in
> > GPIO / PIC communication.
> >
> > I tried to replicate the way Linux
Copying the relevant Debian bug (#933294).
* Matthieu CERDA [2019-08-04 15:42]:
> In dmesg during boot, which I suspect means that something is wrong in
> GPIO / PIC communication.
>
> I tried to replicate the way Linux shuts the NAS down (send 'A' over
> ttyS1,19200n8) and nothing happened,
Le 02/08/2019 à 10:58, Arnaud Patard (Rtp) a écrit :
> Hi,
>
> Martin Michlmayr writes:
>
>> * Arnaud Patard [2019-07-29 14:45]:
>>> As promised, please fix the updated patch. Please note that there are 2
>> Can you submit it upstream for review, or if you have already, send us
>> a link.
>
Hi,
Martin Michlmayr writes:
> * Arnaud Patard [2019-07-29 14:45]:
>> As promised, please fix the updated patch. Please note that there are 2
>
> Can you submit it upstream for review, or if you have already, send us
> a link.
Sorry for the delay. I was waiting for some feedback before
* Arnaud Patard [2019-07-29 14:45]:
> As promised, please fix the updated patch. Please note that there are 2
Can you submit it upstream for review, or if you have already, send us
a link.
--
Martin Michlmayr
https://www.cyrius.com/
Matthieu CERDA writes:
[ Adding bug #908712 in Cc: ]
> Hello again !
>
> Le 26/07/2019 à 22:36, Matthieu CERDA a écrit :
>> Le 26/07/2019 à 11:29, Arnaud Patard (Rtp) a écrit :
>>> Martin Michlmayr writes:
* Matthieu CERDA [2019-07-26 00:17]:
> * On stretch stock kernel
Matthieu CERDA writes:
Hi,
> Hello again !
>
> Le 26/07/2019 à 22:36, Matthieu CERDA a écrit :
>> Le 26/07/2019 à 11:29, Arnaud Patard (Rtp) a écrit :
>>> Martin Michlmayr writes:
* Matthieu CERDA [2019-07-26 00:17]:
> * On stretch stock kernel (4.9.0-9-marvell), qcontrol does not
Hello again !
Le 26/07/2019 à 22:36, Matthieu CERDA a écrit :
> Le 26/07/2019 à 11:29, Arnaud Patard (Rtp) a écrit :
>> Martin Michlmayr writes:
>>> * Matthieu CERDA [2019-07-26 00:17]:
* On stretch stock kernel (4.9.0-9-marvell), qcontrol does not work:
calling it with
Le 26/07/2019 à 11:29, Arnaud Patard (Rtp) a écrit :
> Martin Michlmayr writes:
>> * Matthieu CERDA [2019-07-26 00:17]:
>>> * On stretch stock kernel (4.9.0-9-marvell), qcontrol does not work:
>>> calling it with "qcontrol --direct buzzer" outputs no error, but
>>> does nothing, and
Martin Michlmayr writes:
> * Matthieu CERDA [2019-07-26 00:17]:
>> * On stretch stock kernel (4.9.0-9-marvell), qcontrol does not work:
>> calling it with "qcontrol --direct buzzer" outputs no error, but
>> does nothing, and the status led stays red/green after system has
>>
* Matthieu CERDA [2019-07-26 00:17]:
> * On stretch stock kernel (4.9.0-9-marvell), qcontrol does not work:
> calling it with "qcontrol --direct buzzer" outputs no error, but
> does nothing, and the status led stays red/green after system has
> booted.
There are different potential
Greetings,
I recently got lent a spare QNAP TS-109, that I intend to run on Debian
for backup purpose.
Installation went well (thanks
https://www.cyrius.com/debian/orion/qnap/ts-109/) using the stretch
installer, however I noticed some quirks:
* On stretch stock kernel (4.9.0-9-marvell),
14 matches
Mail list logo
