Package: installation-reports Boot method: netboot Image version: linux-amd64 daily build as of 2014-09-22 from http://d-i.debian.org/daily-images/amd64/daily/netboot/debian-installer/amd64/
Date: 2014-09-22 21:30 Machine: noname Processor: Athlon64 X2 Memory: 3GByte Partitions: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000919f8 Device Boot Start End Blocks Id System /dev/sda1 63 5863724 2931831 82 Linux swap / Solaris /dev/sda2 5863725 103521928 48829102 a5 FreeBSD /dev/sda3 * 103522860 144541695 20509418 7 HPFS/NTFS/exFAT /dev/sda4 201182056 488396799 143607372 f W95 Ext'd (LBA) /dev/sda5 201182058 214853309 6835626 83 Linux /dev/sda6 214853373 299676509 42411568+ 7 HPFS/NTFS/exFAT /dev/sda7 299676573 462176255 81249841+ 83 Linux /dev/sda8 462178304 488396799 13109248 83 Linux Output of lspci -knn (or lspci -nn): 00:00.0 RAM memory [0500]: NVIDIA Corporation MCP67 Memory Controller [10de:0547] (rev a2) 00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP67 ISA Bridge [10de:0548] (rev a2) 00:01.1 SMBus [0c05]: NVIDIA Corporation MCP67 SMBus [10de:0542] (rev a2) 00:01.2 RAM memory [0500]: NVIDIA Corporation MCP67 Memory Controller [10de:0541] (rev a2) 00:02.0 USB controller [0c03]: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller [10de:055e] (rev a2) 00:02.1 USB controller [0c03]: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller [10de:055f] (rev a2) 00:04.0 USB controller [0c03]: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller [10de:055e] (rev a2) 00:04.1 USB controller [0c03]: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller [10de:055f] (rev a2) 00:06.0 IDE interface [0101]: NVIDIA Corporation MCP67 IDE Controller [10de:0560] (rev a1) 00:07.0 Audio device [0403]: NVIDIA Corporation MCP67 High Definition Audio [10de:055c] (rev a1) 00:08.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Bridge [10de:0561] (rev a2) 00:09.0 SATA controller [0106]: NVIDIA Corporation MCP67 AHCI Controller [10de:0554] (rev a2) 00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge [10de:0562] (rev a2) 00:0c.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2) 00:0d.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2) 00:0e.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2) 00:0f.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2) 00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2) 00:11.0 PCI bridge [0604]: NVIDIA Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2) 00:12.0 VGA compatible controller [0300]: NVIDIA Corporation C68 [GeForce 7025 / nForce 630a] [10de:053e] (rev a2) 00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] 00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] 00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] 00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 01) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] only minimal system Install boot loader: [E] Overall install: [O] Comments/Problems: Overall installation of the minimal system was perfect except the grub installation ignored the kFreeBSD installed on the same disk. Also, after booting into the installed system, update-grub did not recognize the BSD system. I fixed this manually, mounting the ufs2 file system and copying the relevant parts of the grub.cfg on the BSD system into linux' 40_custom and running update-grub again. This way, I was able to boot into kFreeBSD. Regards, Herbert -- Herbert Kaminski D-26122 Oldenburg -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20140923153612.2f5e92b6@toshi
