Bug#613035: Installation was successfully on Fujitsu-Siemens Notebook Amilo Pro V2055
Package: installation-reports Boot method: CD Image version: Self-made boot CD with squeeze installer 6.0.0 Date: 2011-02-12 Machine: Fujitsu-Siemens Notebook Amilo Pro V2055 Processor: Celeron M 410 @ 1.46GHz Memory: 768MB Partitions: Dateisystem Typ 1K‐Blöcke Benutzt Verfügbar Ben% Eingehängt auf /dev/sda1 ext4 9611492 4404736 4718516 49% / tmpfs tmpfs 378356 0 378356 0% /lib/init/rw udev tmpfs 373940 188 373752 1% /dev tmpfs tmpfs 378356 88 378268 1% /dev/shm /dev/sda6 ext4 26659076 177884 25126952 1% /home Output of lspci -knn: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:0314] Subsystem: Fujitsu Technology Solutions Device [1734:10ca] Kernel driver in use: agpgart-via 00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:1314] 00:00.2 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:2314] 00:00.3 Host bridge [0600]: VIA Technologies, Inc. PT890 Host Bridge [1106:3208] 00:00.4 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:4314] 00:00.7 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:7314] 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198] 00:06.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02) Subsystem: Device [17f9:0006] Kernel driver in use: b43-pci-bridge 00:0c.0 CardBus bridge [0607]: ENE Technology Inc CB1410 Cardbus Controller [1524:1410] (rev 01) Subsystem: Fujitsu Technology Solutions Device [1734:10ca] Kernel driver in use: yenta_cardbus 00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80) Subsystem: Fujitsu Technology Solutions Device [1734:10ca] Kernel driver in use: sata_via 00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) Subsystem: Fujitsu Technology Solutions Device [1734:10ca] Kernel driver in use: pata_via 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 81) Subsystem: Fujitsu Technology Solutions Device [1734:10ca] Kernel driver in use: uhci_hcd 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 81) Subsystem: Fujitsu Technology Solutions Device [1734:10ca] Kernel driver in use: uhci_hcd 00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) Subsystem: Fujitsu Technology Solutions Device [1734:10ca] Kernel driver in use: ehci_hcd 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227] Subsystem: Fujitsu Technology Solutions Device [1734:10ca] 00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60) Subsystem: Fujitsu Technology Solutions Device [1734:10ca] Kernel driver in use: VIA 82xx Audio 00:11.6 Communication controller [0780]: VIA Technologies, Inc. AC'97 Modem Controller [1106:3068] (rev 80) Subsystem: Fujitsu Technology Solutions Device [1734:10ca] Kernel driver in use: VIA 82xx Modem 00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 78) Subsystem: Fujitsu Technology Solutions Device [1734:10ca] Kernel driver in use: via-rhine 01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 [S3 UniChrome Pro] [1106:3344] (rev 01) Subsystem: Fujitsu Technology Solutions Device [1734:10ca] Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card:[O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system:[O] Clock/timezone setup: [O] User/password setup:[O] Install tasks: [O] Install boot loader:[O] Overall install:[O] Comments/Problems: No problems detected. Installation was successfully. -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d56788e.4000...@yahoo.de
Bug#613043: Installation was successfully on Self-made PC with Athlon XP 2600+
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Package: installation-reports Boot method: CD Image version: Self-made boot CD with squeeze installer 6.0.0 Date: 2011-02-12 Machine: Self-made Desktop PC Processor: Athlon XP 2600+ Memory: 1.0GB Partitions: Dateisystem Typ1K?Blöcke Benutzt Verfügbar Ben% Eingehängt auf /dev/sdb1 ext4 9611492 4417488 4705764 49% / tmpfstmpfs 517260 0517260 0% /lib/init/rw udev tmpfs 512840 220512620 1% /dev tmpfstmpfs 51726088517172 1% /dev/shm /dev/sdb6 ext425870424179616 24376660 1% /home Output of lspci -knn: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge [1106:3189] (rev 80) Subsystem: ASUSTeK Computer Inc. A7V8X motherboard [1043:807f] Kernel driver in use: agpgart-via 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198] 00:0e.0 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 61) Subsystem: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] Kernel driver in use: uhci_hcd 00:0e.1 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 61) Subsystem: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] Kernel driver in use: uhci_hcd 00:0e.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 63) Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104] Kernel driver in use: ehci_hcd 00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80) Subsystem: ASUSTeK Computer Inc. A7V600/K8V Deluxe/K8V-X/A8V Deluxe motherboard [1043:80ed] Kernel driver in use: sata_via 00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed] Kernel driver in use: pata_via 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 81) Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed] Kernel driver in use: uhci_hcd 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 81) Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed] Kernel driver in use: uhci_hcd 00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 81) Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed] Kernel driver in use: uhci_hcd 00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 81) Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed] Kernel driver in use: uhci_hcd 00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed] Kernel driver in use: ehci_hcd 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227] Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed] 00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60) Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/K8V Deluxe motherboard (ADI AD1980 codec [SoundMAX]) [1043:80b0] Kernel driver in use: VIA 82xx Audio 00:11.6 Communication controller [0780]: VIA Technologies, Inc. AC'97 Modem Controller [1106:3068] (rev 80) 00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 78) Subsystem: ASUSTeK Computer Inc. A7V600-X Motherboard [1043:80ed] Kernel driver in use: via-rhine 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AR [Radeon 9600] [1002:4152] Subsystem: PC Partner Limited Device [174b:7c19] Kernel driver in use: radeon 01:00.1 Display controller [0380]: ATI Technologies Inc RV350 AR [Radeon 9600] (Secondary) [1002:4172] Subsystem: PC Partner Limited Device [174b:7c18] Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card:[O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system:[O] Clock/timezone setup: [O] User/password setup:[O] Install tasks: [O] Install boot loader:[O] Overall install:[O]
Bug#613035: marked as done (Installation was successfully on Fujitsu-Siemens Notebook Amilo Pro V2055)
Your message dated Sat, 12 Feb 2011 13:21:06 + with message-id 201102121321.07258.el...@debianpt.org and subject line Re: Bug#613035: Installation was successfully on Fujitsu-Siemens Notebook Amilo Pro V2055 has caused the Debian Bug report #613035, regarding Installation was successfully on Fujitsu-Siemens Notebook Amilo Pro V2055 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 613035: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=613035 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: installation-reports Boot method: CD Image version: Self-made boot CD with squeeze installer 6.0.0 Date: 2011-02-12 Machine: Fujitsu-Siemens Notebook Amilo Pro V2055 Processor: Celeron M 410 @ 1.46GHz Memory: 768MB Partitions: Dateisystem Typ 1K‐Blöcke Benutzt Verfügbar Ben% Eingehängt auf /dev/sda1 ext4 9611492 4404736 4718516 49% / tmpfs tmpfs 378356 0 378356 0% /lib/init/rw udev tmpfs 373940 188 373752 1% /dev tmpfs tmpfs 378356 88 378268 1% /dev/shm /dev/sda6 ext4 26659076 177884 25126952 1% /home Output of lspci -knn: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:0314] Subsystem: Fujitsu Technology Solutions Device [1734:10ca] Kernel driver in use: agpgart-via 00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:1314] 00:00.2 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:2314] 00:00.3 Host bridge [0600]: VIA Technologies, Inc. PT890 Host Bridge [1106:3208] 00:00.4 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:4314] 00:00.7 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:7314] 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198] 00:06.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02) Subsystem: Device [17f9:0006] Kernel driver in use: b43-pci-bridge 00:0c.0 CardBus bridge [0607]: ENE Technology Inc CB1410 Cardbus Controller [1524:1410] (rev 01) Subsystem: Fujitsu Technology Solutions Device [1734:10ca] Kernel driver in use: yenta_cardbus 00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80) Subsystem: Fujitsu Technology Solutions Device [1734:10ca] Kernel driver in use: sata_via 00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) Subsystem: Fujitsu Technology Solutions Device [1734:10ca] Kernel driver in use: pata_via 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 81) Subsystem: Fujitsu Technology Solutions Device [1734:10ca] Kernel driver in use: uhci_hcd 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 81) Subsystem: Fujitsu Technology Solutions Device [1734:10ca] Kernel driver in use: uhci_hcd 00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) Subsystem: Fujitsu Technology Solutions Device [1734:10ca] Kernel driver in use: ehci_hcd 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227] Subsystem: Fujitsu Technology Solutions Device [1734:10ca] 00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60) Subsystem: Fujitsu Technology Solutions Device [1734:10ca] Kernel driver in use: VIA 82xx Audio 00:11.6 Communication controller [0780]: VIA Technologies, Inc. AC'97 Modem Controller [1106:3068] (rev 80) Subsystem: Fujitsu Technology Solutions Device [1734:10ca] Kernel driver in use: VIA 82xx Modem 00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 78) Subsystem: Fujitsu Technology Solutions Device [1734:10ca] Kernel driver in use: via-rhine 01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 [S3 UniChrome Pro] [1106:3344] (rev 01) Subsystem: Fujitsu Technology Solutions Device [1734:10ca] Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card:[O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system:[O] Clock/timezone setup:
Bug#573891: marked as done (kFreeBSD partitioning fails)
Your message dated Sat, 12 Feb 2011 13:44:30 + with message-id 201102121344.30308.el...@debianpt.org and subject line Re: Bug#573891: kFreeBSD partitioning fails has caused the Debian Bug report #573891, regarding kFreeBSD partitioning fails to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 573891: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=573891 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: partman-base Hi, I wanted to install kFreeBSD variant of Debian squeeze from http://d-i.debian.org/daily-images/kfreebsd-i386/daily/monolithic/mini.iso downloaded today (2010-03-14). All went well until manual partitioning: - /dev/hda1 primary ntfs 26GB - free space 3GB When I select to partition the free space, select size (3GB) and type of the partition (primary), I get this error message: !!! Partition disks ??? ??? Go Back Continue Yes, it is correct, six questionmarks. Behind the dialog window I can see the text Computing the new st ...and the rest is obstructed by the dialog. When I continue (or go back), the partitioning menu is empty (like not showing any partitions at all): Guided partitioning Undo changes to partitions Finish partitioning and write changes to disc No clue on tty4 at this stage. However, when I go back to the main menu and select to partition disks again, nothing happens (I am immediately returned to the main menu), but syslog now reads: Mar 14 18:35:32 main-menu[117]: INFO: Menu item 'partman-base' selected Mar 14 18:35:33 main-menu[117]: (process:1184): /bin/partman: Mar 14 18:35:33 main-menu[117]: (process:1184): line 105: Mar 14 18:35:33 main-menu[117]: (process:1184): depmod: not found Mar 14 18:35:33 main-menu[117]: (process:1184): Mar 14 18:35:33 main-menu[117]: (process:1184): /lib/partman/init.d/30parted: Mar 14 18:35:33 main-menu[117]: (process:1184): line 131: Mar 14 18:35:33 main-menu[117]: (process:1184): can't open /var/lib/partman/outfifo: no such file Mar 14 18:35:33 main-menu[117]: (process:1184): Looking at the attached partman log I would say it wants to use the ext2 filesystem by default for the new partition and switching to ufs does not work very well. -- Miroslav Kure hardware-summary.gz Description: Binary data partman.gz Description: Binary data syslog.gz Description: Binary data ---End Message--- ---BeginMessage--- A Quarta 19 Maio 2010 18:22:06 Miroslav Kure você escreveu: [...] It seems the error has been fixed in the recently resumed builds, so feel free to close the bug. ...hence, closing. -- Melhores cumprimentos/Best regards, Miguel Figueiredo http://www.DebianPT.org ---End Message---
Bug#613043: marked as done (Installation was successfully on Self-made PC with Athlon XP 2600+)
Your message dated Sat, 12 Feb 2011 13:22:14 + with message-id 201102121322.14513.el...@debianpt.org and subject line Re: Bug#613043: Installation was successfully on Self-made PC with Athlon XP 2600+ has caused the Debian Bug report #613043, regarding Installation was successfully on Self-made PC with Athlon XP 2600+ to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 613043: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=613043 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Package: installation-reports Boot method: CD Image version: Self-made boot CD with squeeze installer 6.0.0 Date: 2011-02-12 Machine: Self-made Desktop PC Processor: Athlon XP 2600+ Memory: 1.0GB Partitions: Dateisystem Typ1K?Blöcke Benutzt Verfügbar Ben% Eingehängt auf /dev/sdb1 ext4 9611492 4417488 4705764 49% / tmpfstmpfs 517260 0517260 0% /lib/init/rw udev tmpfs 512840 220512620 1% /dev tmpfstmpfs 51726088517172 1% /dev/shm /dev/sdb6 ext425870424179616 24376660 1% /home Output of lspci -knn: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge [1106:3189] (rev 80) Subsystem: ASUSTeK Computer Inc. A7V8X motherboard [1043:807f] Kernel driver in use: agpgart-via 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198] 00:0e.0 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 61) Subsystem: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] Kernel driver in use: uhci_hcd 00:0e.1 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 61) Subsystem: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] Kernel driver in use: uhci_hcd 00:0e.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 63) Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104] Kernel driver in use: ehci_hcd 00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80) Subsystem: ASUSTeK Computer Inc. A7V600/K8V Deluxe/K8V-X/A8V Deluxe motherboard [1043:80ed] Kernel driver in use: sata_via 00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed] Kernel driver in use: pata_via 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 81) Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed] Kernel driver in use: uhci_hcd 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 81) Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed] Kernel driver in use: uhci_hcd 00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 81) Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed] Kernel driver in use: uhci_hcd 00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 81) Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed] Kernel driver in use: uhci_hcd 00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed] Kernel driver in use: ehci_hcd 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227] Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed] 00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60) Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/K8V Deluxe motherboard (ADI AD1980 codec [SoundMAX]) [1043:80b0] Kernel driver in use: VIA 82xx Audio 00:11.6 Communication controller [0780]: VIA Technologies, Inc. AC'97 Modem Controller [1106:3068] (rev 80) 00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 78) Subsystem: ASUSTeK Computer Inc.
Re: Virtualbox Squeeze guest network client failure
On Thu, Feb 10, 2011 at 13:38, Jan de Haan haan.j...@gmail.com wrote: ... It's a squeeze problem since dhcp of the pxe boot of the client (which was used to install Squeeze) does function. ... In this case, the best is to file a bug against linux-2.6 kernel since this is likely a kernel issue with your NIC. -- Otavio Salvador O.S. Systems E-mail: ota...@ossystems.com.br http://www.ossystems.com.br Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktikr87oaqrmxu639y5ynbjxwxrqv7ekkxdaxa...@mail.gmail.com
Re: ERROR EN INSTALACION
Jose, This mailing list is an English one and most people here do not speak or understand Spanish (me included). I will try to help you in any case from the error message you included on the text. Read bellow. 2011/2/7 José Villa Ruiz jvillar...@gmail.com: ... El error es el siguiente: [ 4975353 ] Failed to load image advansys/mcode.bin err -2 [ 4975567 ] scsi host0: error: init_state 0x1f, warn 0xfffe, error 0x0 ... It seems it *can* be a missing firmware since we removed non-free firmwares from Debian main. There're UNOFFICIAL images that include those at: http://cdimage.debian.org/cdimage/unofficial/non-free/cd-including-firmware/ Please give it a try. -- Otavio Salvador O.S. Systems E-mail: ota...@ossystems.com.br http://www.ossystems.com.br Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktin7hnkjrfdembdvqhsusvkmoemavr4zqgwhd...@mail.gmail.com
Re: /lib/lsb/init-functions
Hello Samuel, On Sun, Feb 6, 2011 at 20:36, Samuel Thibault sthiba...@debian.org wrote: ... I would like to avoid forking the script. Which way should I go? Get d-i to have /lib/lsb/init-functions? Or ask the alsa maintainers to extract from the /etc/init.d/alsa-utils the unmute logic into another script that the former calls, and then write a d-i-specific script? I'd say to ask for the extraction of script since we have no use for ini-functions on d-i itself up to now. -- Otavio Salvador O.S. Systems E-mail: ota...@ossystems.com.br http://www.ossystems.com.br Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/AANLkTi=MEcjCYxN3V3ZRSFS=wUCO=uepptv9pysx8...@mail.gmail.com
Re: Upcoming changes to xserver-xorg-* packages
On Sun, Feb 6, 2011 at 09:43, Cyril Brulebois k...@debian.org wrote: this is just for your information, no action is needed on your side. ... Thanks by informing us. Cheers, -- Otavio Salvador O.S. Systems E-mail: ota...@ossystems.com.br http://www.ossystems.com.br Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/AANLkTi=u0dj9zxx0kjv-tujhgdk_pmdvirkyb_xve...@mail.gmail.com
Re: Virtualbox Squeeze guest network client failure
Thanks for your reaction and sugestion, Otavio. It doesn't seem likely though: this is likely a kernel issue with your NIC. I tested this by changing the (virtual) hardware type of the nic of the Debian Squeeze guest from PCnet-FAST III (Am79C973) to Intel PRO/1000 T Server (82543GC), commenting out the first eth0 in /etc/udev/rules.d/70-persistent-net.rules and setting the eth0 in /etc/network/interfaces back from auto to allow-hotplug. No effect. The same bug (no dhcp supplied address acquired on the nic) showed up. Changing from allow-hotplug to auto also remedied this. I'll try this evening putting a pre-up sleep 5 in interfaces and report back. Sincerely, Jan. On Sat, Feb 12, 2011 at 3:30 PM, Otavio Salvador ota...@ossystems.com.brwrote: On Thu, Feb 10, 2011 at 13:38, Jan de Haan haan.j...@gmail.com wrote: ... It's a squeeze problem since dhcp of the pxe boot of the client (which was used to install Squeeze) does function. ... In this case, the best is to file a bug against linux-2.6 kernel since this is likely a kernel issue with your NIC. -- Otavio Salvador O.S. Systems E-mail: ota...@ossystems.com.br http://www.ossystems.com.br Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktikr87oaqrmxu639y5ynbjxwxrqv7ekkxdaxa...@mail.gmail.com -- Piracy is simply demand where supply does not exist.
Bug#596584: revised patch
Hi,
as graphic installer is no longer available for powerpc i propose the
following patch.
--
Melhores cumprimentos/Best regards,
Miguel Figueiredo
http://www.DebianPT.org
diff --git a/src/lib/debian-installer.d/Makefile b/src/lib/debian-installer.d/Makefile
index 7dd479e..8914323 100644
--- a/src/lib/debian-installer.d/Makefile
+++ b/src/lib/debian-installer.d/Makefile
@@ -17,13 +17,11 @@ endif
files = \
S62Xorg
-ifneq (,$(filter i386 amd64,$(DEB_HOST_ARCH_CPU)))
+ifeq ($(DEB_HOST_ARCH_OS),linux)
+ ifneq (,$(filter i386 amd64,$(DEB_HOST_ARCH_CPU)))
files += \
- S61mouse-support-x86
-endif
-ifneq (,$(filter powerpc,$(DEB_HOST_ARCH_CPU)))
- files += \
- S61mouse-support-powerpc
+ S61mouse-support-linux
+ endif
endif
include ../../../Makefile.inc
diff --git a/src/lib/debian-installer.d/S61mouse-support-powerpc b/src/lib/debian-installer.d/S61mouse-support-powerpc
deleted file mode 100644
index a8c1aca..000
--- a/src/lib/debian-installer.d/S61mouse-support-powerpc
+++ /dev/null
@@ -1,10 +0,0 @@
-subarch=$(archdetect)
-subarch=${subarch#*/}
-if [ $DEBIAN_FRONTEND = gtk ] ; then
-case $subarch in
- chrp|chrp_pegasos|chrp_rs6k|chrp_ibm|prep)
- modprobe -q evdev || true
- modprobe -q psmouse || true
- ;;
-esac
-fi
diff --git a/src/lib/debian-installer.d/S61mouse-support-x86 b/src/lib/debian-installer.d/S61mouse-support-x86
deleted file mode 100644
index 587b331..000
--- a/src/lib/debian-installer.d/S61mouse-support-x86
+++ /dev/null
@@ -1,5 +0,0 @@
-if [ $DEBIAN_FRONTEND = gtk ] ; then
-modprobe -q evdev || true
-modprobe -q psmouse || true
-modprobe -q usbmouse || true
-fi
diff --git a/src/lib/debian-installer.d/S63directfb-linux-powerpc b/src/lib/debian-installer.d/S63directfb-linux-powerpc
deleted file mode 100644
index 9279576..000
--- a/src/lib/debian-installer.d/S63directfb-linux-powerpc
+++ /dev/null
@@ -1,10 +0,0 @@
-# Temporary hacks to work around directfb breakage on powerpc
-
-# Enable keyboard and ps2mouse DFB modules
-#sed -i s/^\(disable-module=keyboard\)/#\1/ /etc/directfbrc
-sed -i s/^\(disable-module=ps2mouse\)/#\1/ /etc/directfbrc
-
-# Disable linux_input DFB module except for PowerBook6,7
-if ! grep -q machine.*:.*PowerBook6,7 /proc/cpuinfo 2/dev/null; then
- sed -i s/^#\(disable-module=linux_input\)/\1/ /etc/directfbrc
-fi
Bug#587046: proposal for a workaround
If it is not (yet) feasible to fix the behavior of tasksel when it is removing a task then I suggest to drop the remove command for now. The first sentence in the man page (tasksel - a user interface for installing tasks) implies that it wasn't originally meant for removing at all. guntbert - tasksel 2.81ubuntu1 tasksel-data 2.81ubuntu1 DistroRelease: Ubuntu 10.10 InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Release amd64 (20101007) Package: tasksel 2.81ubuntu1 PackageArchitecture: all ProcVersionSignature: Ubuntu 2.6.35-25.44-generic 2.6.35.10 SourcePackage: tasksel Tags: maverick Uname: Linux 2.6.35-25-generic x86_64 -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d56a803.3020...@gmx.at
Processed: your mail
Processing commands for cont...@bugs.debian.org: # already in d-i repo! tags 593108 + pending Bug #593108 [hw-detect] hw-detect: Install mmc-modules automatically if needed Added tag(s) pending. thanks Stopping processing here. Please contact me if you need assistance. -- 593108: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=593108 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.12975266137147.transcr...@bugs.debian.org
Bug#596584: revised patch
A Sábado 12 Fevereiro 2011 15:50:23 Miguel Figueiredo você escreveu:
Hi,
as graphic installer is no longer available for powerpc i propose the
following patch.
dropped the cpu section, it shouldn't be necessary as mouse should be
available on all linux arch.
--
Melhores cumprimentos/Best regards,
Miguel Figueiredo
http://www.DebianPT.org
diff --git a/src/lib/debian-installer.d/Makefile b/src/lib/debian-installer.d/Makefile
index 7dd479e..b09221d 100644
--- a/src/lib/debian-installer.d/Makefile
+++ b/src/lib/debian-installer.d/Makefile
@@ -1,15 +1,8 @@
dir = lib/debian-installer.d
-DEB_HOST_ARCH_CPU := $(shell dpkg-architecture -qDEB_HOST_ARCH_CPU 2/dev/null)
DEB_HOST_ARCH_OS:= $(shell dpkg-architecture -qDEB_HOST_ARCH_OS 2/dev/null)
# Take account of old dpkg-architecture output.
-ifeq ($(DEB_HOST_ARCH_CPU),)
- DEB_HOST_ARCH_CPU := $(shell dpkg-architecture -qDEB_HOST_GNU_CPU)
- ifeq ($(DEB_HOST_ARCH_CPU),x86_64)
-DEB_HOST_ARCH_CPU := amd64
- endif
-endif
ifeq ($(DEB_HOST_ARCH_OS),)
DEB_HOST_ARCH_OS:= $(shell dpkg-architecture -qDEB_HOST_GNU_SYSTEM)
endif
@@ -17,13 +10,9 @@ endif
files = \
S62Xorg
-ifneq (,$(filter i386 amd64,$(DEB_HOST_ARCH_CPU)))
- files += \
- S61mouse-support-x86
-endif
-ifneq (,$(filter powerpc,$(DEB_HOST_ARCH_CPU)))
+ifeq ($(DEB_HOST_ARCH_OS),linux)
files += \
- S61mouse-support-powerpc
+ S61mouse-support-linux
endif
include ../../../Makefile.inc
diff --git a/src/lib/debian-installer.d/S61mouse-support-powerpc b/src/lib/debian-installer.d/S61mouse-support-powerpc
deleted file mode 100644
index a8c1aca..000
--- a/src/lib/debian-installer.d/S61mouse-support-powerpc
+++ /dev/null
@@ -1,10 +0,0 @@
-subarch=$(archdetect)
-subarch=${subarch#*/}
-if [ $DEBIAN_FRONTEND = gtk ] ; then
-case $subarch in
- chrp|chrp_pegasos|chrp_rs6k|chrp_ibm|prep)
- modprobe -q evdev || true
- modprobe -q psmouse || true
- ;;
-esac
-fi
diff --git a/src/lib/debian-installer.d/S61mouse-support-x86 b/src/lib/debian-installer.d/S61mouse-support-x86
deleted file mode 100644
index 587b331..000
--- a/src/lib/debian-installer.d/S61mouse-support-x86
+++ /dev/null
@@ -1,5 +0,0 @@
-if [ $DEBIAN_FRONTEND = gtk ] ; then
-modprobe -q evdev || true
-modprobe -q psmouse || true
-modprobe -q usbmouse || true
-fi
diff --git a/src/lib/debian-installer.d/S63directfb-linux-powerpc b/src/lib/debian-installer.d/S63directfb-linux-powerpc
deleted file mode 100644
index 9279576..000
--- a/src/lib/debian-installer.d/S63directfb-linux-powerpc
+++ /dev/null
@@ -1,10 +0,0 @@
-# Temporary hacks to work around directfb breakage on powerpc
-
-# Enable keyboard and ps2mouse DFB modules
-#sed -i s/^\(disable-module=keyboard\)/#\1/ /etc/directfbrc
-sed -i s/^\(disable-module=ps2mouse\)/#\1/ /etc/directfbrc
-
-# Disable linux_input DFB module except for PowerBook6,7
-if ! grep -q machine.*:.*PowerBook6,7 /proc/cpuinfo 2/dev/null; then
- sed -i s/^#\(disable-module=linux_input\)/\1/ /etc/directfbrc
-fi
Processed: Re: [Pkg-utopia-maintainers] Bug#613053: Network-manager: device not managed
Processing commands for cont...@bugs.debian.org: reassign 613053 live-installer Bug #613053 [network-manager] Network-manager: device not managed Bug reassigned from package 'network-manager' to 'live-installer'. Bug No longer marked as found in versions network-manager/0.8.1-6. thanks Stopping processing here. Please contact me if you need assistance. -- 613053: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=613053 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.129752766811899.transcr...@bugs.debian.org
Bug#593239: marked as done (installation-reports: Installation of Squeeze AMD64 Alpha1 successful on Dell PowerEdge R710)
Your message dated Sat, 12 Feb 2011 16:55:24 + with message-id 201102121655.24909.el...@debianpt.org and subject line has caused the Debian Bug report #593239, regarding installation-reports: Installation of Squeeze AMD64 Alpha1 successful on Dell PowerEdge R710 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 593239: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=593239 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: installation-reports Severity: normal *** Please type your report below this line *** -- Package-specific info: Boot method: netboot Image version: http://ftp.nl.debian.org/debian/dists/testing/main/installer-amd64/current/images/netboot/netboot.tar.gz Date: 22:26 23-07-10 Machine: Dell PowerEdge R710, PERC6/i H700 Partitions: The H700 does fine with 2 SAS disks in RAID 1 and 4 near-line SAS disks in RAID 5. FilesystemType 1K-blocks Used Available Use% Mounted on /dev/mapper/zeus-root ext3 329233139420172815 45% / tmpfstmpfs 6161116 0 6161116 0% /lib/init/rw udev tmpfs 6155516 212 6155304 1% /dev tmpfstmpfs 6161116 0 6161116 0% /dev/shm /dev/sda1 ext2 233191 16067204683 8% /boot /dev/mapper/zeus-home ext3 113621656192304 107657680 1% /home /dev/mapper/zeus-tmp ext3 376807 10340347011 3% /tmp /dev/mapper/zeus-usr ext3 5765236515248 4957124 10% /usr /dev/mapper/zeus-var ext3 2882592195320 2540840 8% /var /dev/mapper/zeus_data-data ext3 5766980216 317941564 5156092940 6% /data Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card:[ ] Configure network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system:[O] Clock/timezone setup: [O] User/password setup:[O] Install tasks: [O] Install boot loader:[O] Overall install:[O] Comments/Problems: I had to use Squeeze/testing instead of Lenny/stable because of the H700 controller. I have a box with Broadcom NetXtreme II BCM5709, this worked fine with the binary drivers provided separately from the Debian installer: http://cdimage.debian.org/cdimage/unofficial/non-free/firmware/testing/current/firmware.tar.gz I used a solution similiar to this one to provide firmware during netboot: http://wiki.debian.org/DebianInstaller/NetbootFirmware The loaded driver is: kern.log.1:1972:Aug 13 15:57:11 zeus kernel: [2.122809] bnx2 :02:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw kern.log.1:1973:Aug 13 15:57:11 zeus kernel: [2.124500] bnx2 :02:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to sub...@bugs.debian.org. == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION=Debian GNU/Linux installer DISTRIB_RELEASE=6.0 (squeeze) - installer build 20100722 X_INSTALLATION_MEDIUM=netboot == Installer hardware-summary: == uname -a: Linux zeus 2.6.32-5-amd64 #1 SMP Tue Jun 1 04:34:03 UTC 2010 x86_64 GNU/Linux lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port [8086:3406] (rev 13) lspci -knn: Subsystem: Dell Device [1028:0235] lspci -knn: 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:04.0 PCI bridge [0604]: Intel Corporation 5520/X58 I/O Hub PCI Express Root Port 4 [8086:340b] (rev 13) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:05.0 PCI bridge [0604]: Intel Corporation 5520/X58 I/O Hub PCI Express Root Port 5 [8086:340c] (rev 13) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:06.0 PCI bridge [0604]: Intel Corporation 5520/X58 I/O Hub PCI Express Root
Re: Incorrect RO translation in d-i
On Mon, Jan 31, 2011 at 16:59, Christian PERRIER bubu...@debian.org wrote: Thanks for doing so. However, this has nothing to do, indeed, with the Romanian translation. Joey Hess or Colin Watson probably have an explanation for that behaviour (IIRC, I saw such explanation recently, but don't remember where...). This is because the last configured one that used db_title was man-db. -- Otavio Salvador O.S. Systems E-mail: ota...@ossystems.com.br http://www.ossystems.com.br Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktinyvsnxopzmmhwxeyey3rvgyrf+ob7lm5qkw...@mail.gmail.com
Re: Incorrect RO translation in d-i
On Sat, Feb 12, 2011 at 17:38, Otavio Salvador ota...@ossystems.com.br wrote: On Mon, Jan 31, 2011 at 16:59, Christian PERRIER bubu...@debian.org wrote: Thanks for doing so. However, this has nothing to do, indeed, with the Romanian translation. Joey Hess or Colin Watson probably have an explanation for that behaviour (IIRC, I saw such explanation recently, but don't remember where...). This is because the last configured one that used db_title was man-db. I think I fixed it in grub-installer. Untested thought. -- Otavio Salvador O.S. Systems E-mail: ota...@ossystems.com.br http://www.ossystems.com.br Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/AANLkTinWn__+Ot7G2cxaMZv9YaCJ8T8ixdjD758j=x...@mail.gmail.com
Bug#572803: marked as done (Module pata_via missing from Lenny d-i kernel)
Your message dated Sat, 12 Feb 2011 18:10:26 + with message-id 201102121810.26635.el...@debianpt.org and subject line has caused the Debian Bug report #572803, regarding Module pata_via missing from Lenny d-i kernel to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 572803: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=572803 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: debian-installer Version: 20090123lenny6 Severity: important My bug report boils down to this: The pata_via module is apparently excluded from the kernel of the Lenny installer. And I don't know how I could work around that. The full story: I tried to install Lenny (5.03) on a machine with an Asrock G965M-S motherboard: http://www.asrock.com/MB/overview.asp?Model=G965M-S The board has SATA support and a (legacy) PATA IDE controller. I have a PATA harddisk and DVD drive hooked up to the PATA IDE controller (since I do not have any SATA drives). But the Lenny installer can neither find my harddrive nor the DVD drive. It seems that the PATA IDE controller is not detected or not supported. The PCI device identifier of the controller is 1106:0415, i.e. vendor VIA Technologies, Inc., device: PATA IDE Host Controller. The pata_via module seems to support this controller: http://cateee.net/lkddb/web-lkddb/PATA_VIA.html But the pata_via module is not available in the Lenny d-i kernel. I can neither modprobe it or locate the *.ko file. I successfully installed OpenSUSE on the machine (which detected the controller and loaded the pata_via module). But I would much rather prefer to install Debian. -- System Information: Debian Release: 5.0.4 APT prefers stable APT policy: (900, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core) Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash ---End Message--- ---BeginMessage--- Closing as the kernel module was already included in Debian Squeeze. -- Melhores cumprimentos/Best regards, Miguel Figueiredo http://www.DebianPT.org ---End Message---
Bug#613089: Installation was successfully on self-made PC with Athlon XP 1700+
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Package: installation-reports Boot method: CD Image version: Self-made boot CD with squeeze installer 6.0.0 Date: 2011-02-12 Machine: Self-made Desktop PC Processor: Athlon XP 1700+ Memory: 384MB Partitions: Dateisystem Typ1K?Blöcke Benutzt Verfügbar Ben% Eingehängt auf /dev/sda6 ext4 7224600 4413544 2443976 65% / tmpfstmpfs 192296 0192296 0% /lib/init/rw udev tmpfs 187876 248187628 1% /dev tmpfstmpfs 192296 112192184 1% /dev/shm /dev/sda7 ext410317828155768 9637944 2% /home /dev/sdb5 ext2 482186233721223568 52% /media/c1c9d2e8-4d19-434d-8fff-d207bf23b391 Output of lspci -knn: 00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 735 Host [1039:0735] (rev 01) Kernel driver in use: agpgart-sis 00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) [1039:0001] 00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge) [1039:0018] 00:02.1 SMBus [0c05]: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller [1039:0016] 00:02.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 07) Subsystem: Elitegroup Computer Systems K7S5A motherboard [1019:0a14] Kernel driver in use: ohci_hcd 00:02.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 07) Subsystem: Elitegroup Computer Systems K7S5A motherboard [1019:0a14] Kernel driver in use: ohci_hcd 00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513] (rev d0) Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step) [1039:5513] Kernel driver in use: pata_sis 00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS] AC'97 Sound Controller [1039:7012] (rev a0) Subsystem: Elitegroup Computer Systems Device [1019:0a14] Kernel driver in use: Intel ICH 00:03.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet [1039:0900] (rev 90) Subsystem: Elitegroup Computer Systems K7S5A motherboard [1019:0a14] Kernel driver in use: sis900 00:0d.0 Multimedia audio controller [0401]: ESS Technology ES1969 Solo-1 Audiodrive [125d:1969] (rev 02) Subsystem: ESS Technology Device [125d:8898] Kernel driver in use: ESS ES1938 (Solo-1) 00:0f.0 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 61) Subsystem: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] Kernel driver in use: uhci_hcd 00:0f.1 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 61) Subsystem: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] Kernel driver in use: uhci_hcd 00:0f.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 63) Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104] Kernel driver in use: ehci_hcd 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV34 [GeForce FX 5200] [10de:0322] (rev a1) Subsystem: Giga-byte Technology Device [1458:3419] Kernel driver in use: nouveau Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card:[O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system:[O] Clock/timezone setup: [O] User/password setup:[O] Install tasks: [O] Install boot loader:[O] Overall install:[O] Comments/Problems: No problems detected. Installation was successfully. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk1W3FcACgkQLIf9UiHPz1oyMgCggy4YErSBduLPdXtbrSZFPEKp TdMAnAjc0wx39H5zIatTct5a8/q9iqVj =XoNv -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d56dc57.9000...@yahoo.de
Processed: your mail
Processing commands for cont...@bugs.debian.org: retitle 609466 [SPARC] console [tty0] enabled, bootconsole disabled Bug #609466 [installation-reports] installation-reports pseudo package Changed Bug title to '[SPARC] console [tty0] enabled, bootconsole disabled' from 'installation-reports pseudo package' thanks Stopping processing here. Please contact me if you need assistance. -- 609466: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=609466 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.129753877731876.transcr...@bugs.debian.org
Bug#603084: marked as done (ext4 default fs)
Your message dated Sat, 12 Feb 2011 19:25:49 + with message-id 201102121925.49823.el...@debianpt.org and subject line has caused the Debian Bug report #603084, regarding ext4 default fs to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 603084: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=603084 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: partman-base Version: 144 Severity: important pledging for: packages/partman/partman-base/debian/rules:DEFAULT_FS=ext4 ext4 is a sane default and valid choice for linux-2.6 = 2.6.32 It is the fs that the linux-2.6 team recommends as default choice for squeeze. ext4 is a safe choice and maintained upstream in the stable 2.6.32 tree. I have been told that current dpkg may be a blocker thus maintainers added to cc. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.36-rc6-amd64 (SMP w/2 CPU cores) Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash ---End Message--- ---BeginMessage--- fixed in partman-base 148 ! ---End Message---
Bug#613089: marked as done (Installation was successfully on self-made PC with Athlon XP 1700+)
Your message dated Sat, 12 Feb 2011 19:43:03 + with message-id 201102121943.03689.el...@debianpt.org and subject line Re: Bug#613089: Installation was successfully on self-made PC with Athlon XP 1700+ has caused the Debian Bug report #613089, regarding Installation was successfully on self-made PC with Athlon XP 1700+ to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 613089: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=613089 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Package: installation-reports Boot method: CD Image version: Self-made boot CD with squeeze installer 6.0.0 Date: 2011-02-12 Machine: Self-made Desktop PC Processor: Athlon XP 1700+ Memory: 384MB Partitions: Dateisystem Typ1K?Blöcke Benutzt Verfügbar Ben% Eingehängt auf /dev/sda6 ext4 7224600 4413544 2443976 65% / tmpfstmpfs 192296 0192296 0% /lib/init/rw udev tmpfs 187876 248187628 1% /dev tmpfstmpfs 192296 112192184 1% /dev/shm /dev/sda7 ext410317828155768 9637944 2% /home /dev/sdb5 ext2 482186233721223568 52% /media/c1c9d2e8-4d19-434d-8fff-d207bf23b391 Output of lspci -knn: 00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 735 Host [1039:0735] (rev 01) Kernel driver in use: agpgart-sis 00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) [1039:0001] 00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge) [1039:0018] 00:02.1 SMBus [0c05]: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller [1039:0016] 00:02.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 07) Subsystem: Elitegroup Computer Systems K7S5A motherboard [1019:0a14] Kernel driver in use: ohci_hcd 00:02.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 07) Subsystem: Elitegroup Computer Systems K7S5A motherboard [1019:0a14] Kernel driver in use: ohci_hcd 00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513] (rev d0) Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step) [1039:5513] Kernel driver in use: pata_sis 00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS] AC'97 Sound Controller [1039:7012] (rev a0) Subsystem: Elitegroup Computer Systems Device [1019:0a14] Kernel driver in use: Intel ICH 00:03.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet [1039:0900] (rev 90) Subsystem: Elitegroup Computer Systems K7S5A motherboard [1019:0a14] Kernel driver in use: sis900 00:0d.0 Multimedia audio controller [0401]: ESS Technology ES1969 Solo-1 Audiodrive [125d:1969] (rev 02) Subsystem: ESS Technology Device [125d:8898] Kernel driver in use: ESS ES1938 (Solo-1) 00:0f.0 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 61) Subsystem: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] Kernel driver in use: uhci_hcd 00:0f.1 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 61) Subsystem: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] Kernel driver in use: uhci_hcd 00:0f.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 63) Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104] Kernel driver in use: ehci_hcd 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV34 [GeForce FX 5200] [10de:0322] (rev a1) Subsystem: Giga-byte Technology Device [1458:3419] Kernel driver in use: nouveau Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card:[O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system:[O] Clock/timezone setup: [O] User/password setup:[O] Install tasks: [O] Install boot loader:[O] Overall install:[O] Comments/Problems: No problems detected. Installation was successfully. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla -
Processed: your mail
Processing commands for cont...@bugs.debian.org: reassign 545933 kernel-wedge Bug #545933 [installation-reports] Installation-Report: Dell Optiplex 745 USB keyboard not recognized Bug reassigned from package 'installation-reports' to 'kernel-wedge'. thanks Stopping processing here. Please contact me if you need assistance. -- 545933: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=545933 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.129754175612466.transcr...@bugs.debian.org
Bug#613099: installation-reports: Installation Report - Debian Squeeze 6.0 amd64 cd1 on Thinkpad T61
Package: installation-reports Severity: wishlist Tags: d-i -- Package-specific info: Boot method: CD Image version: http://cdimage.debian.org/debian-cd/6.0.0/amd64/iso-cd/debian-6.0.0-amd64-CD-1.iso Date: Date and time of the install Machine: Lenovo Thinkpad T61 Partitions: df -Tl will do; the raw partition table is preferred Output of fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x56205267 Device Boot Start End Blocks Id System /dev/sda1 13466278394887 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 *3466 19458 128449536 8e Linux LVM Output of df -Tl FilesystemType 1K-blocks Used Available Use% Mounted on /dev/mapper/vg0--squeeze-lv0--root ext4 9611492 1951504 7171748 22% / tmpfstmpfs 1013636 0 1013636 0% /lib/init/rw udev tmpfs 1011380 240 1011140 1% /dev tmpfstmpfs 1013636 0 1013636 0% /dev/shm /dev/mapper/vg0--squeeze-lv5--home ext497119956 30239752 61946780 33% /home /dev/mapper/vg0--squeeze-lv3--tmp ext4 2882592 69928 2666232 3% /tmp /dev/mapper/vg0--squeeze-lv2--usr.local ext4 5765236142652 5329720 3% /usr/local /dev/mapper/vg0--squeeze-lv1--var ext4 8647944857172 7351476 11% /var Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card:[O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system:[O] Clock/timezone setup: [O] User/password setup:[O] Install tasks: [O] Install boot loader:[O] Overall install:[O] Comments/Problems: I am on a university network that requires user authentication (via an html page) on boot, so I was unable to do a network install because there was no way for me to login in the debian-installer. 1. Might I suggest adding w3m as an optional installer module, at the very least for the netinst image, so users can authenticate and proceed with the install. Perhaps this is possible by using the rescue mode of the CD, but I do not could I have done that in the rescue mode before proceeding with the intall? 2. After installation I had no mirrors in my /etc/apt/sources.list (aside from security.debian.org, commented out). Instead of omitting the mirror when it is unreachable, perhaps ask the user whether or not he/she would like the chosen mirror added as a commented-out entry in sources.list. Other comments: I used the Expert non-gui install, and everything else worked perfectly. :) -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to sub...@bugs.debian.org. == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION=Debian GNU/Linux installer DISTRIB_RELEASE=6.0 (squeeze) - installer build 20110106+b1 X_INSTALLATION_MEDIUM=cdrom == Installer hardware-summary: == uname -a: Linux t61 2.6.32-5-amd64 #1 SMP Fri Dec 10 15:35:08 UTC 2010 x86_64 GNU/Linux lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c) lspci -knn: Subsystem: Lenovo Device [17aa:20b1] lspci -knn: 00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port [8086:2a01] (rev 0c) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:19.0 Ethernet controller [0200]: Intel Corporation 82566MM Gigabit Network Connection [8086:1049] (rev 03) lspci -knn: Subsystem: Lenovo Device [17aa:20b9] lspci -knn: Kernel driver in use: e1000e lspci -knn: 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) lspci -knn: Subsystem: Lenovo Device [17aa:20aa] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) lspci -knn: Subsystem: Lenovo Device [17aa:20aa] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) lspci -knn: Subsystem: Lenovo Device [17aa:20ab] lspci -knn:
Processed: your mail
Processing commands for cont...@bugs.debian.org: tags 603083 + pending Bug #603083 [partman-base] reorder fs list on partitioning make ext4 toplist Added tag(s) pending. thanks Stopping processing here. Please contact me if you need assistance. -- 603083: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=603083 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.129754320819419.transcr...@bugs.debian.org
Bug#584995: #584995 Failed to create ext4 filesystem
hi, regarding the bug you reported, can you try the latest release - Debian Squeeze - and report if the problem still persists? I have done several installations with ext4 (on i386 and amd64) and always successful. We would like to close (if solved) this report or analyse deeper in case you still have problems with ext4. -- Melhores cumprimentos/Best regards, Miguel Figueiredo http://www.DebianPT.org -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201102122107.23307.el...@debianpt.org
[SRM] Approval for partconf_1.36squeeze1
Dear stable release managers,
I would like to fix a bug in partconf, which prevent installing a MIPS
machine using preseeding, as it's not possible to change the default
values of two debconf questions.
Please consider the diff below for partconf in stable.
Aurelien
diff --git a/debian/changelog b/debian/changelog
index bf599d6..b283bf6 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,11 @@
+partconf (1.36squeeze1) stable-proposed-updates; urgency=low
+
+ [ Aurelien Jarno ]
+ * Don't set default debconf values, they are already set in the
+templates. This fixes preseeding.
+
+ -- Aurelien Jarno aure...@debian.org Sat, 12 Feb 2011 22:31:09 +0100
+
partconf (1.36) unstable; urgency=low
[ Updated translations ]
diff --git a/partconf.c b/partconf.c
index b7d290d..c4a3d31 100644
--- a/partconf.c
+++ b/partconf.c
@@ -266,7 +266,6 @@ sanity_checks(void)
// XXX something like Partitions 1, 3 and 7 on IDE3 master, but this
// XXX is probably hard, especially for i18n. :-( If multi-line
// XXX substitutions worked, we could just list the partitions.
-debconf_set(debconf, partconf/confirm, false);
debconf_input(debconf, critical, partconf/confirm);
if (debconf_go(debconf) == 30)
return 0;
@@ -602,7 +601,6 @@ main(void)
if (check_proc_mounts()) {
// Chicken out if /target is already mounted
-debconf_set(debconf,partconf/already-mounted, no);
debconf_input(debconf, critical, partconf/already-mounted);
debconf_go(debconf);
debconf_get(debconf,partconf/already-mounted);
--
Aurelien Jarno GPG: 1024D/F1BCDB73
aurel...@aurel32.net http://www.aurel32.net
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20110212214029.ga7...@volta.aurel32.net
Proposed d-i fixes on sparc for 6.0.1
Hello, I would like to push a couple of fixes into 6.0.1 which prevent people from completing the installation on a wide array of sparc machines: http://bugs.debian.org/608516: niu network driver is not included in the installer udebs. This prevents network detection during the installation on newer T2+ sparc systems. Proposed patch is committed to git: http://git.debian.org/?p=d-i/linux-kernel-di-sparc-2.6.git;a=commit;h=255af4217d51fc32eeb0b844884a7244656b0675 http://bugs.debian.org/610906 pata_cmd6x (and other pata drivers) are missing from installer initrd. This prevents CD-ROM drive detection during installation, making install from any CD media impossible (and, unfortunately, there is no simple workaround - the only way to avoid this is to netboot). Proposed patch is committed to git: http://git.debian.org/?p=d-i/debian-installer.git;a=commit;h=be086ccd9915f029a5de5b7fc1829fdab80f0a67 I would like your blessing to upload these changes to stable. Thanks. -- Jurij Smakov ju...@wooyd.org Key: http://www.wooyd.org/pgpkey/ KeyID: C99E03CC -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110212214218.ga4...@droopy.oc.cox.net
Re: [SRM] Approval for partconf_1.36squeeze1
On Sat, Feb 12, 2011 at 22:40:29 +0100, Aurelien Jarno wrote: Dear stable release managers, I would like to fix a bug in partconf, which prevent installing a MIPS machine using preseeding, as it's not possible to change the default values of two debconf questions. Please consider the diff below for partconf in stable. Ack, please go ahead. Cheers, Julien -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110212215627.gn3...@radis.liafa.jussieu.fr
Re: Proposed d-i fixes on sparc for 6.0.1
On Sat, Feb 12, 2011 at 21:42:18 +, Jurij Smakov wrote: Hello, I would like to push a couple of fixes into 6.0.1 which prevent people from completing the installation on a wide array of sparc machines: http://bugs.debian.org/608516: niu network driver is not included in the installer udebs. This prevents network detection during the installation on newer T2+ sparc systems. Proposed patch is committed to git: http://git.debian.org/?p=d-i/linux-kernel-di-sparc-2.6.git;a=commit;h=255af4217d51fc32eeb0b844884a7244656b0675 http://bugs.debian.org/610906 pata_cmd6x (and other pata drivers) are missing from installer initrd. This prevents CD-ROM drive detection during installation, making install from any CD media impossible (and, unfortunately, there is no simple workaround - the only way to avoid this is to netboot). Proposed patch is committed to git: http://git.debian.org/?p=d-i/debian-installer.git;a=commit;h=be086ccd9915f029a5de5b7fc1829fdab80f0a67 I would like your blessing to upload these changes to stable. Ack. It's possible dak will want a newer version in unstable first though (I don't remember the details of how propup is or isn't broken...). Cheers, Julien -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110212220513.go3...@radis.liafa.jussieu.fr
Processing of cdebconf_0.154_amd64.changes
cdebconf_0.154_amd64.changes uploaded successfully to localhost along with the files: cdebconf_0.154.dsc cdebconf_0.154.tar.gz cdebconf-priority_0.154_all.udeb cdebconf_0.154_amd64.deb cdebconf-gtk_0.154_amd64.deb libdebconfclient0_0.154_amd64.deb libdebconfclient0-dev_0.154_amd64.deb cdebconf-udeb_0.154_amd64.udeb libdebconfclient0-udeb_0.154_amd64.udeb cdebconf-text-udeb_0.154_amd64.udeb cdebconf-newt-udeb_0.154_amd64.udeb cdebconf-gtk-udeb_0.154_amd64.udeb Greetings, Your Debian queue daemon (running on host franck.debian.org) -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/e1ponpr-0007xb...@franck.debian.org
Bug#605401: marked as done (debian-installer-launcher: d-i window does not account for GNOME pannels and window decoration)
Your message dated Sat, 12 Feb 2011 22:32:22 + with message-id e1poo0s-9z...@franck.debian.org and subject line Bug#605401: fixed in cdebconf 0.154 has caused the Debian Bug report #605401, regarding debian-installer-launcher: d-i window does not account for GNOME pannels and window decoration to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 605401: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=605401 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: debian-installer-launcher Version: 4 Severity: important I have built a live-cd with an installer included, but whenever I start debian installer I cannot see any buttons, since d-i window is intended to be ran in fullscreen mode with no gnome pannels (e.g. taskbar), nor window decoration present. As such it becomes impossible to progress forward through the installation unless I manage to position the d-i window to hide window decoration and pannels. -- System Information: Debian Release: squeeze/sid Architecture: i386 (i686) Kernel: Linux 2.6.32-5-486 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages debian-installer-launcher depends on: ii debconf [debconf-2.0] 1.5.36 Debian configuration management sy ii gnome-terminal [x-terminal-em 2.30.2-1 The GNOME terminal emulator applic ii psmisc22.11-1utilities that use the proc file s ii xterm [x-terminal-emulator] 261-1 X terminal emulator Versions of packages debian-installer-launcher recommends: ii kexec-tools 1:2.0.1-4 kexec tool for kexec reboots debian-installer-launcher suggests no packages. -- debconf information: debian-installer-launcher/kernel-mismatch/error: debian-installer-launcher/kernel-mismatch/title: ---End Message--- ---BeginMessage--- Source: cdebconf Source-Version: 0.154 We believe that the bug you reported is fixed in the latest version of cdebconf, which is due to be installed in the Debian FTP archive: cdebconf-gtk-udeb_0.154_amd64.udeb to main/c/cdebconf/cdebconf-gtk-udeb_0.154_amd64.udeb cdebconf-gtk_0.154_amd64.deb to main/c/cdebconf/cdebconf-gtk_0.154_amd64.deb cdebconf-newt-udeb_0.154_amd64.udeb to main/c/cdebconf/cdebconf-newt-udeb_0.154_amd64.udeb cdebconf-priority_0.154_all.udeb to main/c/cdebconf/cdebconf-priority_0.154_all.udeb cdebconf-text-udeb_0.154_amd64.udeb to main/c/cdebconf/cdebconf-text-udeb_0.154_amd64.udeb cdebconf-udeb_0.154_amd64.udeb to main/c/cdebconf/cdebconf-udeb_0.154_amd64.udeb cdebconf_0.154.dsc to main/c/cdebconf/cdebconf_0.154.dsc cdebconf_0.154.tar.gz to main/c/cdebconf/cdebconf_0.154.tar.gz cdebconf_0.154_amd64.deb to main/c/cdebconf/cdebconf_0.154_amd64.deb libdebconfclient0-dev_0.154_amd64.deb to main/c/cdebconf/libdebconfclient0-dev_0.154_amd64.deb libdebconfclient0-udeb_0.154_amd64.udeb to main/c/cdebconf/libdebconfclient0-udeb_0.154_amd64.udeb libdebconfclient0_0.154_amd64.deb to main/c/cdebconf/libdebconfclient0_0.154_amd64.deb A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 605...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Otavio Salvador ota...@debian.org (supplier of updated cdebconf package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA256 Format: 1.8 Date: Sat, 12 Feb 2011 20:11:12 -0200 Source: cdebconf Binary: cdebconf cdebconf-gtk libdebconfclient0 libdebconfclient0-dev cdebconf-udeb cdebconf-priority libdebconfclient0-udeb cdebconf-text-udeb cdebconf-slang-udeb cdebconf-newt-udeb cdebconf-gtk-udeb Architecture: source all amd64 Version: 0.154 Distribution: unstable Urgency: low Maintainer: Debian Install System Team debian-boot@lists.debian.org Changed-By: Otavio Salvador ota...@debian.org Description: cdebconf - Debian Configuration Management System (C-implementation) cdebconf-gtk - Gtk+ frontend for Debian Configuration Management System cdebconf-gtk-udeb - Gtk+ frontend for Debian Configuration Management System (udeb) cdebconf-newt-udeb - Newt frontend for Debian Configuration Management System (udeb) cdebconf-priority - Change debconf priority (udeb) cdebconf-slang-udeb - S-Lang frontend for Debian
cdebconf_0.154_amd64.changes ACCEPTED into unstable
Accepted: cdebconf-gtk-udeb_0.154_amd64.udeb to main/c/cdebconf/cdebconf-gtk-udeb_0.154_amd64.udeb cdebconf-gtk_0.154_amd64.deb to main/c/cdebconf/cdebconf-gtk_0.154_amd64.deb cdebconf-newt-udeb_0.154_amd64.udeb to main/c/cdebconf/cdebconf-newt-udeb_0.154_amd64.udeb cdebconf-priority_0.154_all.udeb to main/c/cdebconf/cdebconf-priority_0.154_all.udeb cdebconf-text-udeb_0.154_amd64.udeb to main/c/cdebconf/cdebconf-text-udeb_0.154_amd64.udeb cdebconf-udeb_0.154_amd64.udeb to main/c/cdebconf/cdebconf-udeb_0.154_amd64.udeb cdebconf_0.154.dsc to main/c/cdebconf/cdebconf_0.154.dsc cdebconf_0.154.tar.gz to main/c/cdebconf/cdebconf_0.154.tar.gz cdebconf_0.154_amd64.deb to main/c/cdebconf/cdebconf_0.154_amd64.deb libdebconfclient0-dev_0.154_amd64.deb to main/c/cdebconf/libdebconfclient0-dev_0.154_amd64.deb libdebconfclient0-udeb_0.154_amd64.udeb to main/c/cdebconf/libdebconfclient0-udeb_0.154_amd64.udeb libdebconfclient0_0.154_amd64.deb to main/c/cdebconf/libdebconfclient0_0.154_amd64.deb Override entries for your package: cdebconf-gtk-udeb_0.154_amd64.udeb - optional debian-installer cdebconf-gtk_0.154_amd64.deb - optional admin cdebconf-newt-udeb_0.154_amd64.udeb - optional debian-installer cdebconf-priority_0.154_all.udeb - standard debian-installer cdebconf-text-udeb_0.154_amd64.udeb - optional debian-installer cdebconf-udeb_0.154_amd64.udeb - standard debian-installer cdebconf_0.154.dsc - source utils cdebconf_0.154_amd64.deb - extra utils libdebconfclient0-dev_0.154_amd64.deb - optional libdevel libdebconfclient0-udeb_0.154_amd64.udeb - optional debian-installer libdebconfclient0_0.154_amd64.deb - optional libs Announcing to debian-devel-chan...@lists.debian.org Closing bugs: 605401 Thank you for your contribution to Debian. -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/e1poo0s-9t...@franck.debian.org
Bug#234812: marked as done (xserver-xfree86: configure script hangs)
Your message dated Sat, 12 Feb 2011 22:52:34 + with message-id 201102122252.34966.el...@debianpt.org and subject line has caused the Debian Bug report #234812, regarding xserver-xfree86: configure script hangs to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 234812: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=234812 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: xserver-xfree86 Version: 4.3.0-2 Severity: important -- Package-specific info: 01:01.0 VGA compatible controller: S3 Inc. 86C270-294 Savage/IX-MV (rev 13) 01:01.0 Class 0300: 5333:8c12 (rev 13) # XF86Config-4 (XFree86 X server configuration file) generated by dexconf, the # Debian X Configuration tool, using values from the debconf database. Module Loader present OS Kernel: Linux version 2.6.3-1-686 (herbert@gondolin) (gcc version 3.3.2 (Debian)) #1 Sat Feb 21 00:06:35 EST 2004 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Wed Feb 25 23:06:23 2004 (==) Using config file: /etc/X11/XF86Config-4 (==) ServerLayout Default Layout (**) |--Screen Default Screen (0) (**) | |--Monitor Generic Monitor (**) | |--Device S3 Inc. 86C270-294 Savage/IX-MV (**) |--Input Device Generic Keyboard (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc104 (**) XKB: model: pc104 (**) Option XkbLayout pl (**) XKB: layout: pl (==) Keyboard: CustomKeycode disabled (**) |--Input Device Configured Mouse (**) |--Input Device Generic Mouse (WW) The directory /usr/lib/X11/fonts/Type1 does not exist. Entry deleted from font path. (WW) The directory /usr/lib/X11/fonts/CID does not exist. Entry deleted from font path. (WW) The directory /usr/lib/X11/fonts/Speedo does not exist. Entry deleted from font path. (WW) The directory /usr/lib/X11/fonts/cyrillic does not exist. Entry deleted from font path. (**) FontPath set to unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 9 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x80010808, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7190 card , rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7191 card , rev 03 class 06,04,00 hdr 01 (II) PCI: 00:04:0: chip 104c,ac51 card 4000, rev 00 class 06,07,00 hdr 82 (II) PCI: 00:04:1: chip 104c,ac51 card 4800, rev 00 class 06,07,00 hdr 82 (II) PCI: 00:07:0: chip 8086,7110 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 8086,7111 card , rev 01 class 01,01,80 hdr 00 (II) PCI: 00:07:2: chip 8086,7112 card , rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 8086,7113 card , rev 03 class 06,80,00 hdr 00 (II) PCI: 00:08:0: chip 125d,1988 card 103c,0012 rev 12 class 04,01,00 hdr 80 (II) PCI: 00:08:1: chip 125d,1989 card 103c,0012 rev 12 class 07,80,00 hdr 80 (II) PCI: 00:10:0: chip 1113,1216 card 1113,2242 rev 11 class 02,00,00 hdr 00 (II) PCI: 01:01:0: chip 5333,8c12 card 103c,0014 rev 13 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x -
Bug#612376: flash-kernel: please include efikamx support
On Thu, Feb 10, 2011 at 08:11:36AM +, Martin Michlmayr wrote:
Yeah, you'd think that Clint would know how to submit a proper patch.
My apologies.
--- flash-kernel.sid 2011-02-12 17:41:30.532519059 -0500
+++ flash-kernel.patched 2011-02-12 17:54:16.589578778 -0500
@@ -76,6 +76,69 @@
fi
}
+efikamx_flash_kernel() {
+root=$(readlink -f /dev/root)
+echo Root filesystem is $root 2
+
+loadaddr=0x90008000
+ tmpdir=$(mktemp -d)
+
+printf Generating kernel u-boot image... 2
+cat $kfile $tmpdir/kernel
+mkimage -A arm -O linux -T kernel -C none -n $desc -a $loadaddr \
+-e $loadaddr -d $tmpdir/kernel $tmpdir/uboot 2 1/dev/null
+echo done. 2
+
+if [ -e /boot/uImage-$kvers ]; then
+echo Creating backup of /boot/uImage-$kvers. 2
+mv /boot/uImage-$kvers /boot/uImage-$kvers.bak
+fi
+
+echo Creating new /boot/uImage. 2
+mv $tmpdir/uboot /boot/uImage-$kvers
+rm -f $tmpdir/uboot
+
+printf Generating initrd u-boot image... 2
+mkimage -A arm -O linux -T ramdisk -C gzip -a 0x0 \
+-e 0x0 -n $idesc -d $ifile $tmpdir/uboot 2 1/dev/null
+echo done. 2
+if [ -e /boot/uInitrd-$kvers ]; then
+echo Creating backup of /boot/uInitrd. 2
+mv /boot/uInitrd-$kvers /boot/uInitrd-$kvers.bak
+fi
+echo Creating new /boot/uInitrd. 2
+mv $tmpdir/uboot /boot/uInitrd-$kvers
+rm -f $tmpdir/uboot
+printf Generating new u-boot boot script... 2
+# The UUID will come from the flash-kernel config file
+
+printf Generating boot.scr... 2
+cat $tmpdir/boot.script EOF
+setenv ramdisk uInitrd-$kvers;
+setenv kernel uImage-$kvers;
+setenv bootargs console=tty1 console=\${console} root=$root rootwait rw quiet splash;
+\${loadcmd} \${ramdiskaddr} \${ramdisk};
+if imi \${ramdiskaddr}; then; else
+ setenv bootargs \${bootargs} noinitrd;
+ setenv ramdiskaddr ;
+fi;
+\${loadcmd} \${kerneladdr} \${kernel}
+if imi \${kerneladdr}; then
+ bootm \${kerneladdr} \${ramdiskaddr}
+fi;
+EOF
+mkimage -A arm -T script -C none -n Debian U-Boot boot script -d $tmpdir/boot.script \
+$tmpdir/boot.scr 2 1/dev/null
+echo done. 2
+if [ -e /boot/boot.scr ]; then
+echo Creating backup of /boot/boot.scr. 2
+mv /boot/boot.scr /boot/boot.scr.bak
+fi
+echo Creating new /boot/boot.scr. 2
+mv $tmpdir/boot.scr /boot/boot.scr
+rm -rf $tmpdir*
+}
+
if [ x$1 = x--machine ]; then
machine=$2
shift 2
@@ -105,6 +168,8 @@
Seagate FreeAgent DockStar) exit 0 ;;
Thecus N2100)exit 0 ;;
Lanner EM7210) exit 0 ;;
+ Genesi Efika MX (Smartbook)) exit 0 ;;
+ Genesi Efika MX (Smarttop)) exit 0 ;;
*) exit 1 ;;
esac
fi
@@ -517,6 +582,10 @@
) $imtd || error failed.
echo done. 2
;;
+ Genesi Efika MX (Smartbook) | Genesi Efika MX (Smarttop))
+#check_subarch $running_subarch
+efikamx_flash_kernel
+ ;;
*)
error Unsupported platform.
;;
Preparation of fixes to 6.0.1
Hello folks, I have prepare some branches that has what I am intending to upload to stable-proposed-updates. The modules I have changed are the following: grub-installer linux-kernel-di-sparc-2.6 tasksel cdebconf debootstrap kernel-wedge Please take a look and comment on those. If you think anything is missing please say so. -- Otavio Salvador O.S. Systems E-mail: ota...@ossystems.com.br http://www.ossystems.com.br Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/AANLkTinTbvVOnR0xcET=0GMbA3rHO6Hkg48JQJYK6a=8...@mail.gmail.com
Re: Preparation of fixes to 6.0.1
On Sat, Feb 12, 2011 at 10:46:07PM +, Otavio Salvador wrote: Hello folks, I have prepare some branches that has what I am intending to upload to stable-proposed-updates. The modules I have changed are the following: grub-installer linux-kernel-di-sparc-2.6 This should probably be uploaded once the update kernel for 6.0.1 is available? tasksel cdebconf debootstrap kernel-wedge Please include debian-installer as well, I've committed a patch targeting 6.0.1. Thanks for doing this. Please take a look and comment on those. If you think anything is missing please say so. -- Otavio Salvador O.S. Systems E-mail: ota...@ossystems.com.br http://www.ossystems.com.br Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br -- To UNSUBSCRIBE, email to debian-release-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/AANLkTinTbvVOnR0xcET=0GMbA3rHO6Hkg48JQJYK6a=8...@mail.gmail.com -- Jurij Smakov ju...@wooyd.org Key: http://www.wooyd.org/pgpkey/ KeyID: C99E03CC -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110212231312.ga5...@droopy.oc.cox.net
Re: Preparation of fixes to 6.0.1
On Sat, 2011-02-12 at 23:13 +, Jurij Smakov wrote: I have prepare some branches that has what I am intending to upload to stable-proposed-updates. The modules I have changed are the following: The below shouldn't be assumed to be an ack or nack for the particular uploads at this point. grub-installer There doesn't appear to be a squeeze branch for this listed on gitweb; for a stable update, the hurd fixes wouldn't be appropriate for instance. linux-kernel-di-sparc-2.6 This should probably be uploaded once the update kernel for 6.0.1 is available? Yes; or at least it will need rebuilding once a final(ish) kernel for 6.0.1 is in place; Dann's often uploaded lkdi-* nearer to the point release to get it built against the kernel we're including. tasksel Would this include all of the changes between 2.88 and 2.89, or just some subset? As I think I've mentioned before, changes which might affect what ends up on CD1 for any given CD set worry me, particularly given the last minute problems we had for 6.0.0 with getting the release notes on to the CDs and trying to get all of the packages required for KDE CD1 to fit on a single CD for some architectures. cdebconf debootstrap kernel-wedge Please include debian-installer as well, I've committed a patch targeting 6.0.1. I'd imagine this would want to be uploaded closer to the point release, or at least we'll need to rebuild it later on to pick up any further builds of lkdi-* or other udebs. Regards, Adam -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1297555390.27877.4029.ca...@hathi.jungle.funky-badger.org
Re: Incorrect RO translation in d-i
On Sb, 12 feb 11, 17:51:40, Otavio Salvador wrote: On Sat, Feb 12, 2011 at 17:38, Otavio Salvador ota...@ossystems.com.br wrote: On Mon, Jan 31, 2011 at 16:59, Christian PERRIER bubu...@debian.org wrote: Thanks for doing so. However, this has nothing to do, indeed, with the Romanian translation. Joey Hess or Colin Watson probably have an explanation for that behaviour (IIRC, I saw such explanation recently, but don't remember where...). This is because the last configured one that used db_title was man-db. I think I fixed it in grub-installer. Untested thought. Can I test this with a recent enough daily image or is it more complicated? Regards, Andrei -- Offtopic discussions among Debian users and developers: http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic signature.asc Description: Digital signature
Debian installer build: failed or old builds
Debian installer build overview --- Failed or old builds: * OLD BUILD:hppa Jan 17 07:06 didaily@c3700 build_cdrom http://d-i.debian.org/daily-images/hppa/daily/build_cdrom.log * OLD BUILD:hppa Jan 17 07:10 didaily@c3700 build_netboot http://d-i.debian.org/daily-images/hppa/daily/build_netboot.log * OLD BUILD:hppa Jan 17 07:14 didaily@c3700 build_miniiso http://d-i.debian.org/daily-images/hppa/daily/build_miniiso.log * OLD BUILD:kfreebsd-amd64 Feb 05 00:11 buildd@fano build_cdrom http://d-i.debian.org/daily-images/kfreebsd-amd64/daily/build_cdrom.log * OLD BUILD:kfreebsd-amd64 Feb 05 00:13 buildd@fano build_netboot http://d-i.debian.org/daily-images/kfreebsd-amd64/daily/build_netboot.log * OLD BUILD:kfreebsd-i386 Feb 05 00:12 buildd@finzi build_cdrom http://d-i.debian.org/daily-images/kfreebsd-i386/daily/build_cdrom.log * OLD BUILD:kfreebsd-i386 Feb 05 00:14 buildd@finzi build_netboot http://d-i.debian.org/daily-images/kfreebsd-i386/daily/build_netboot.log * daily mipsel images build: The build daemon responsible for these builds is currently moving to a new hosting location. Daily builds should be available again within the first two weeks of 2011. * OLD BUILD:powerpc Feb 09 00:07 buildd@praetorius build_powerpc_cdrom http://d-i.debian.org/daily-images/powerpc/daily/build_powerpc_cdrom.log * OLD BUILD:powerpc Feb 09 00:10 buildd@praetorius build_powerpc_netboot http://d-i.debian.org/daily-images/powerpc/daily/build_powerpc_netboot.log * OLD BUILD:powerpc Feb 09 00:15 buildd@praetorius build_powerpc_netboot-gtk http://d-i.debian.org/daily-images/powerpc/daily/build_powerpc_netboot-gtk.log * OLD BUILD:powerpc Feb 09 00:17 buildd@praetorius build_powerpc_hd-media http://d-i.debian.org/daily-images/powerpc/daily/build_powerpc_hd-media.log * OLD BUILD:powerpc Feb 09 00:20 buildd@praetorius build_powerpc64_cdrom http://d-i.debian.org/daily-images/powerpc/daily/build_powerpc64_cdrom.log * OLD BUILD:powerpc Feb 09 00:22 buildd@praetorius build_powerpc64_netboot http://d-i.debian.org/daily-images/powerpc/daily/build_powerpc64_netboot.log * OLD BUILD:powerpc Feb 09 00:26 buildd@praetorius build_powerpc64_netboot-gtk http://d-i.debian.org/daily-images/powerpc/daily/build_powerpc64_netboot-gtk.log * daily sparc images build: Due to the lack of buildd suitable buildd machine there are currently no daily builds for the SPARC architecture. These builds will be reenabled as soon as as a suitable machine is available. * FAILED BUILD: amd64 Feb 07 22:17 debian-cd@pettersson 2squeezepowerpc http://cdbuilder.debian.org/cdimage-log/2squeezepowerpc * FAILED BUILD: amd64 Feb 07 22:17 debian-cd@pettersson Csqueezepowerpc http://cdbuilder.debian.org/cdimage-log/Csqueezepowerpc * FAILED BUILD: amd64 Feb 07 22:17 debian-cd@pettersson 1squeezesparc http://cdbuilder.debian.org/cdimage-log/1squeezesparc * FAILED BUILD: amd64 Feb 07 22:17 debian-cd@pettersson 2squeezesparc http://cdbuilder.debian.org/cdimage-log/2squeezesparc * FAILED BUILD: amd64 Feb 07 22:17 debian-cd@pettersson 2squeezemulti-arch-1 http://cdbuilder.debian.org/cdimage-log/2squeezemulti-arch-1 * FAILED BUILD: amd64 Feb 07 22:17 debian-cd@pettersson Csqueezemulti-arch-1 http://cdbuilder.debian.org/cdimage-log/Csqueezemulti-arch-1 * FAILED BUILD: amd64 Feb 07 22:17 debian-cd@pettersson 1squeezekfreebsd-amd64 http://cdbuilder.debian.org/cdimage-log/1squeezekfreebsd-amd64 * FAILED BUILD: amd64 Feb 07 22:17 debian-cd@pettersson 2squeezekfreebsd-amd64 http://cdbuilder.debian.org/cdimage-log/2squeezekfreebsd-amd64 * FAILED BUILD: amd64 Feb 07 22:17 debian-cd@pettersson 1squeezekfreebsd-i386 http://cdbuilder.debian.org/cdimage-log/1squeezekfreebsd-i386 * FAILED BUILD: amd64 Feb 07 22:17 debian-cd@pettersson 2squeezekfreebsd-i386 http://cdbuilder.debian.org/cdimage-log/2squeezekfreebsd-i386 * FAILED BUILD: amd64 Feb 08 00:49 debian-cd@pettersson multi-arch http://cdbuilder.debian.org/cdimage-log/multi-arch Totals: 121 builds (11 failed, 22 old) -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/e1poqjn-0002r4...@ravel.debian.org
Bug#613099: installation-reports: Installation Report - Debian Squeeze 6.0 amd64 cd1 on Thinkpad T61
Quoting Jimmy Wu (jimmywu...@gmail.com): 1. Might I suggest adding w3m as an optional installer module, at the very least for the netinst image, so users can authenticate and proceed with the install. Perhaps this is possible by using the rescue mode of the CD, but I do not could I have done that in the rescue mode before proceeding with the intall? It would mean developing a udeb for w3m, integrate it in D-I, etc, etc. For something that's quite a corner case, imho. So, well, I somehow doubt this will happenbut I may be wrong and someone may step up and do the work..:) 2. After installation I had no mirrors in my /etc/apt/sources.list (aside from security.debian.org, commented out). Instead of omitting the mirror when it is unreachable, perhaps ask the user whether or not he/she would like the chosen mirror added as a commented-out entry in sources.list. This is expected in a non-networked situation. How could we ask (and check about a mirror if there's no network? Even if we want to add an entry for a mirror, we have to ask abou tit, which means also testing it. I also very much doubt that what you suggest is likely to happen as it would change the whole logic of choose-mirror. signature.asc Description: Digital signature
