Package: installation-reports > INSTALL REPORT > > Debian-installer-version:
base-installer 0.093 > uname -a: Now: Linux saphir 2.6.7-1-k7 #1 Thu Jul 8 06:45:35 EDT 2004 i686 GNU/Linux (installed using kernel-image-2.4.26-1-386) > Date: ??? > Method: How did you install? What did you boot off? If network > install, from where? Proxied? Network install from ftp.proxad.net using "20040720 Daily build" CD, NAT + dhcp gateway. > Machine: > Processor: Athlon XP 2400+ > Memory: 512MB > Root Device: /dev/hda > Root Size/partition table: Disk /dev/hda: 122.9 GB, 122942324736 bytes 16 heads, 63 sectors/track, 238216 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Device Boot Start End Blocks Id System /dev/hda1 1 496 249952+ 6 FAT16 /dev/hda2 497 1984 749952 e W95 FAT16 (LBA) /dev/hda3 1985 238216 119060928 f W95 Ext'd (LBA) /dev/hda5 1985 3922 976720+ 82 Linux swap /dev/hda6 3923 7797 1952968+ 83 Linux /dev/hda7 7798 13610 2929720+ 83 Linux /dev/hda8 13611 42674 14648224+ 83 Linux /dev/hda9 42675 52362 4882720+ 83 Linux /dev/hda10 52363 62050 4882720+ 83 Linux /dev/hda11 62051 81426 9765472+ 83 Linux /dev/hda12 180088 238216 29296984+ 83 Linux hda1 and hda2 are empty (reserved for future DOS installation) hda3 is to be changed to Linux Extended (85) # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/hda6 / ext3 defaults,errors=remount-ro 0 1 /dev/hda10 /home ext3 defaults 0 2 /dev/hda11 /home/marc/docs ext3 defaults 0 2 /dev/hda9 /tmp ext3 defaults 0 2 /dev/hda8 /usr ext3 defaults 0 2 /dev/hda7 /var ext3 defaults 0 2 /dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0 /dev/hdd /media/cdrom1 iso9660 ro,user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 > Output of lspci and lspci -n: # lspci 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge 0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge 0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50) 0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01) 0000:01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01) # lspci -n 0000:00:00.0 0600: 1106:3189 (rev 80) 0000:00:01.0 0604: 1106:b198 0000:00:10.0 0c03: 1106:3038 (rev 80) 0000:00:10.1 0c03: 1106:3038 (rev 80) 0000:00:10.2 0c03: 1106:3038 (rev 80) 0000:00:10.3 0c03: 1106:3104 (rev 82) 0000:00:11.0 0601: 1106:3177 0000:00:11.1 0101: 1106:0571 (rev 06) 0000:00:11.5 0401: 1106:3059 (rev 50) 0000:00:12.0 0200: 1106:3065 (rev 74) 0000:01:00.0 0300: 1002:5964 (rev 01) 0000:01:00.1 0380: 1002:5d44 (rev 01) > Base System Installation Checklist: > [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it > > Initial boot worked: [E] > Configure network HW: [O] > Config network: [O] > Detect CD: [O] > Load installer modules: [O] > Detect hard drives: [O] > Partition hard drives: [O] > Create file systems: [O] > Mount partitions: [O] > Install base system: [O] > Install boot loader: [O] > Reboot: [O] > > Comments/Problems: I had to use debian-installer/framebuffer=false (VIA AGP + ATI Radeon 9200SE [see above] + Futura HD17A TTF screen) There's a typo in the French message about GRUB: "systèmed'exploitation" should read "système d'exploitation". > Install logs and other status info is available in /var/log/debian-installer/. > Once you have filled out this report, mail it to [EMAIL PROTECTED] Thank you for all your work! -- Marc Mezzarobba ------------------------------------------------------- -- Marc Mezzarobba