Package: installation-reports Version: beta2 Severity: normal INSTALL REPORT
Debian-installer-version: beta 2 uname -a: Linux blackhole 2.4.23-1-k7 #1 Mon Dec 1 00:05:09 EST 2003 i686 GNU/ Linux Date: 21/1/04 Method: CDROM and network install using sarge-i386-businesscard.iso Initial boot was from CDROM, packages not in that iso image were downloaded from ftp.au.debian.org, using a squid proxy on the local network. No files were cached by the proxy since the proxy was recently installed. Local network contains a DHCP server which was used to configure the network. Network interface is a generic ne2k-pci. Machine: Custom AMD box Processor: AMD Athlon 800Mhz Memory: 256Mb PC133 SDRAM Root Device: 40Gb IDE disk, reported by linux as /dev/hda Root Size/partition table: /dev/hda1 160Mb ext3 / /dev/hda2 256Mb swap /dev/hda3 extended /dev/hda5 4.2Gb ext3 /usr /dev/hda6 4.6Gb ext3 /var /dev/hda7 30Gb ext3 /home Output of lspci:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 02) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] 00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22 ) 00:04.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/ A/ C/VT8235 PIPC Bus Master IDE (rev 10) 00:04.2 USB Controller: VIA Technologies, Inc. USB (rev 10) 00:04.3 USB Controller: VIA Technologies, Inc. USB (rev 10) 00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30 ) 00:09.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] 00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) 00:11.0 Unknown mass storage controller: Promise Technology, Inc. 20265 (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation NV10DDR [GeForce 256 DDR] (rev 10) Base System Installation Checklist: Initial boot worked: [ O ] Configure network HW: [ O ] Config network: [ O ] Detect CD: [ O ] Load installer modules: [ O ] Detect hard drives: [ O ] Partition hard drives: [ O ] Create file systems: [ O ] Mount partitions: [ O ] Install base system: [ O ] Install boot loader: [ O ] Reboot: [ O ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Worked fine. A few more status messages would be reassuring - especially during the mke2fs stage of the installation (the installer seems to sit hung on a blank screen, which isn't ideal). =) Peter -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
