Quoting Holger Levsen ([EMAIL PROTECTED]):
On Sunday 21 September 2008 15:18, Christian Perrier wrote:
Debian Edu lenny has 0.674~svn53427 which I dont want to upload to lenny
_at this moment_ and at the same time I dont want to upload a 0.674 to
Debian
But you will *at some moment*?
Package: gcc-4.3
Version: 4.3.2-1
/usr/share/doc/gcc-4.3/README.Bugs says:
There are complete instructions in the gcc info manual (found in the
gcc-doc package), section Bugs.
The gcc info manual in gcc-doc (version 5:2), in that section,
has a list of criteria for reporting bugs, but
Dear maintainer of dhcp3 and Debian translators,
Some days ago, I sent a notice to the maintainer of the dhcp3 Debian
package, mentioning the status of at least one old po-debconf translation
update in the BTS.
The package maintainer and I agreed for a translation update round. At
the end of
Dear maintainer of zephyr and Debian translators,
Some days ago, I sent a notice to the maintainer of the zephyr Debian
package, mentioning the status of at least one old po-debconf translation
update in the BTS.
I announced the intent to build and possibly upload a non-maintainer upload
for
(shorter deadlien than usual)
Dear maintainer of lastfmsubmitd and Debian translators,
Some days ago, I sent a notice to the maintainer of the lastfmsubmitd Debian
package, mentioning the status of at least one old po-debconf translation
update in the BTS.
The package maintainer and I agreed
Dear maintainer of lirc and Debian translators,
Some days ago, I sent a notice to the maintainer of the lirc Debian
package, mentioning the status of at least one old po-debconf translation
update in the BTS.
I announced the intent to build and possibly upload a non-maintainer upload
for this
Dear maintainer of cernlib and Debian translators,
Some days ago, I sent a notice to the maintainer of the cernlib Debian
package, mentioning the status of at least one old po-debconf translation
update in the BTS.
I announced the intent to build and possibly upload a non-maintainer upload
for
Package: podracer
Version: 1.4-1
Severity: wishlist
It would be nice if bittorent packet only recommends but not depends
on package bittorent. If podracer is used only for http there is no
need for a bittorent client (and server).
Greetings
Sebastian Waschik
-- System Information:
Debian
Martin,
#491770 against isdnutils seems to suffer again from what I'll call
the Ikea syndrom now: the Swedish translation is too short..:-)
You probably might want to check file you sent in bug reports bak in
late July as it seems that most of them are truncated in the bug log...
--
On Mon, 22 Sep 2008, Adeodato Simó wrote:
Package: debsums
Version: 2.0.37
Severity: important
As subject says, it should be weekly at most.
Full ack. It takes several hours on my laptop… and my computer is very
slow when debsums still runs at 8 AM when I start my work.
Furthermore its
On Sun, 28 Sep 2008, Chris Lamb wrote:
Raphael Hertzog wrote:
Do you plan to maintain the various Django related packages in the
python-modules team ?
I'm open to persuasion on this, otherwise no.
Well, I'm maintaining like you several Django related packages
(python-django itself,
While going over l10n reports for argus, for an NMU of l10n upload
proposal, I found that Eder Marques was apparently trying to send a
Brazilian Portuguese translation but forgot the attachment..:-)
It seems that nobody noticed this as of now...Of course, correcting
this could be a good idea..:)
Package: wnpp
Severity: wishlist
* Package name: ttf-tomsontalks
Version : 1.0
Upstream Author : Frank Bruder [EMAIL PROTECTED]
* URL : http://frankbruder.fr.ohost.de/fonts_en.html#tomsonTalks
* License : SIL OFL 1.1
Description : Free comic lettering
On 2008-09-29 08:20 +0200, Raphael Hertzog wrote:
On Mon, 22 Sep 2008, Adeodato Simó wrote:
Package: debsums
Version: 2.0.37
Severity: important
As subject says, it should be weekly at most.
Full ack. It takes several hours on my laptop… and my computer is very
slow when debsums still
Quoting Paul Gevers ([EMAIL PROTECTED]):
Package: xawtv
Version: 3.95.dfsg.1-8
Tags: l10n, patch
Severity: wishlist
Thanks
Please find attached the Dutch translation of the debconf template. I
would be glad if you use it in the next upload.
For translation updates please contact the
Rafael Laboissiere wrote:
* Jerome Warnier [EMAIL PROTECTED] [2008-09-27 23:41]:
To answer to your question strictly speaking, as Etch ships with both
versions of PG and newest clients are backward-compatible with older
servers, the PHP module was built with the 8.1 client but allows to
With non-ascii characters you're expected to set the appropriate encoding, in
your locale, via the environment variable HGENCODING, or via the --encoding
switch -- see hg(1).
Thank you.
Sorry for not spotting this, but before submitting I looked for
documentation on this issue and even asked
James,
I really test seccure-decrypt and works fine to me, only complains a
warning but works fine...
This is the warning...
WARNING: Cannot obtain memory lock: Cannot allocate memory.
but I presume you already knows...
do you belive any other component could fail in a particular way?
I ask
Package: smartmontools
Version: 5.38-2
Severity: wishlist
Please add
Homepage: http://sourceforge.net/projects/smartmontools
Field to debian/control. I suggest using */projects/* link over the
direct http://smartmontools.sourceforge.net/ because the *projects*
link poinst to canonical
On 2008-09-29 at 08:20:54, Raphael Hertzog wrote:
My cron mail only contains this:
run-parts: /etc/cron.daily/debsums exited with return code 1
Yes, this was also reported in Bug#499532. It has been fixed and will be in
the next upload.
There's quite some work left apparently. It has been
* Fabian Rey ([EMAIL PROTECTED]) wrote:
Package: iceweasel
Version: 2.0.0.16-0etch1
Followup-For: Bug #475176
closed only
What do you mean by this statement?
--
Eric Dorland [EMAIL PROTECTED]
ICQ: #61138586, Jabber: [EMAIL PROTECTED]
signature.asc
Description: Digital signature
Hi,
Gyorgy Jeney wrote:
2008/9/21 Gyorgy Jeney [EMAIL PROTECTED]:
2008/9/20 Vincent Danjean [EMAIL PROTECTED]:
Hi,
I talk about this bug with Samuel Thibault (involved in braille
support). His internet connection is not good for now but he think
it can be related to
Il giorno lun, 29/09/2008 alle 06.49 +0200, Christian Perrier ha
scritto:
(shorter deadlien than usual)
Dear maintainer of lastfmsubmitd and Debian translators,
Some days ago, I sent a notice to the maintainer of the lastfmsubmitd Debian
package, mentioning the status of at least one old
Martin Bagge wrote:
resending the po-file as attachement.
Hi,
Your translation has been added to our Git. I'll try to push it to Lenny
as translations can be pushed after the freeze of Lenny.
Thanks for your work.
Now, would you have some time to do some (much bigger) translation work
for our
On Mon, Sep 29, 2008 at 07:50:17AM +0200, martin f krafft wrote:
In a way that we could run this over the entire archive to produce
statistics? Well, all Vcs-Git packages anyway...?
Yes.
It would be better to avoid adding that behavior to debcheckout -p
though, as currently that flag is
Hi Micah!
Finally I came around testing Daniel's hint and indeed, moving the
config away from /var/lib/vservers solved the problem.
I've tested this with 0.30.212-1 on etch.
Regards, David Schmitt
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
Package: gbdfed
Version: 1.3patch1-2
Severity: wishlist
I see that a newer version of gbdfed is available upstream than is
packaged in Debian:
http://www.math.nmsu.edu/~mleisher/Software/gbdfed/
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500,
Il giorno lun, 29/09/2008 alle 07.39 +0200, Christian Perrier ha
scritto:
Dear maintainer of lirc and Debian translators,
Some days ago, I sent a notice to the maintainer of the lirc Debian
package, mentioning the status of at least one old po-debconf translation
update in the BTS.
I
reassign 500526 python-gnome2-extras 2.19.1-2
tags 500526 + sid
thanks
On 2008-09-29 07:50 +0200, Kartik Mistry wrote:
Package: istanbul
Version: 0.2.2-4
Severity: serious
Package can't be install on Sid. I have tried on both i386/amd64 arch.
[EMAIL PROTECTED]:~$ sudo apt-get install
Sven Arvidsson wrote:
On Sun, 2008-09-28 at 21:18 +0200, Jelle de Jong wrote:
I did not directly connect the zoom level as the memory bug/feature. Any
idea what the developers are planning to do about this? I only saw that
the bug was changed as critical, bug no concrete plans?
Hi,
It's
Raphael Geissert ha scritto:
I have uploaded the 570 package, and an unreleased 577 package; could
you please try both of them and tell me if the mouse cursor shows up
again? and with which package version?
On 2008-09-29 at 08:47:29, Sven Joachim wrote:
Full ack. It takes several hours on my laptop… and my computer is very
slow when debsums still runs at 8 AM when I start my work.
Maybe using ionice(1) as in the mlocate cron script could alleviate this.
Done. Thanks for the suggestion!
Package: ttf-kochi
Version: 1.0.20030809-6
Severity: normal
Tags: l10n
Hi Hideki
Thank you that you for taking care of the japanese font packages. I think
that the english text in the new NEWS.Debian file could be improved. I've
made a suggestion for an alternative text below. I removed the
Package: nas
Severity: wishlist
Tags: l10n patch
Hi
Attached nas debconf templates Basque translation, please commit it.
thx
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1,
'experimental')
Package: cupsys
Version: 1.2.7-4etch4
Severity: normal
hello,
dunno who's really to blame here, I have a strange problem with an
HP DeskJet 560C and cupsys: selected driver is Gutenprint's, printing via
OpenOffice.org works fine, yet printing via cupsys' client lp a plain .ps
(ie any app not
Package: openjump
Severity: wishlist
Please migrate from libjdom0-java to libjdom1-java if possible, so
that the former (JDOM 0.9) can be phased out.
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
It's already fixed in the git repository. *Could* be commit 7f53c1c but
I've not bisected it. In addition, commit 220e0fb adds the submitted
Cyrillic tests and a couple more.
I think sed 4.2 is no more than a couple of months away, so you can
wait. :-)
Paolo
--
To UNSUBSCRIBE, email to
Package: libjdom0-java
Version: 0.9b-3
Severity: important
JDOM 1.0 was released in September 2004, so it is time for users of
JDOM 0.9 to migrate, after which this package can be retired.
Please use the libjdom1-java package instead.
-- System Information:
Debian Release: lenny/sid
APT
On Mon, 29 Sep 2008, Christian Perrier wrote:
#491770 against isdnutils seems to suffer again from what I'll call
the Ikea syndrom now: the Swedish translation is too short..:-)
=)
You probably might want to check file you sent in bug reports bak in
late July as it seems that most of them
Package: libwerken.xpath-java
Version: 0.9.4-9
Severity: wishlist
Please migrate from libjdom0-java to libjdom1-java if possible, so
that the former (JDOM 0.9) can be phased out.
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (990, 'testing'), (500,
Package: libnsuml-java
Severity: wishlist
Please migrate from libjdom0-java to libjdom1-java if possible, so
that the former (JDOM 0.9) can be phased out.
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Kurt Roeckx schrieb:
According to the version information supplied, it's not fixed. The
problem is that the changelog of the version currently in unstable
did not close the bug. It was closed in a version uploaded to unstable,
but at the same time a new branch was created in experimental not
Oh, I've been quite busy lately ... but the packaging is done... and
available in the ubuntu repository.
I'll do my best to get it include in debian in the next few days.
Thanks !
Chris
--
Ma vie |
Mes recettes | http://www.reponses.net
Mes images
Package: velocity
Version: 1.4-5
Severity: wishlist
Please migrate from libjdom0-java to libjdom1-java if possible, so
that the former (JDOM 0.9) can be phased out.
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (1,
Package: network-manager
Version: 0.6.6-2
Followup-For: Bug #421251
Just to add this one: I am seeing the same bug here for my Atheros WiFi
card using the atk5 driver from the lenny default Kernel. I also have
trouble reproducing it, it seems not to be dependend on the number
of suspend/resume
Package: kdebase
Version: 4:3.5.9.dfsg.1-5
Severity: grave
Justification: causes non-serious data loss
I just switched from etch to lenny and now gnupod warns me about the case
sensitive filesystem on my iPod:
$ gnupod_check.pl
gnupod_check.pl Version 0.99.8 (C) Adrian Ulrich
Package: aolserver4
Version: 4.5.0-16
Severity: normal
*** Please type your report below this line ***
Hi,
The package gives the error just when it's installed and tries to start
the daemon. When restarting the daemon again it works, so it seems to be
a problem of starting the daemon on the
Package: insserv
Version: 1.12.0-4
Severity: minor
Man page of insserv lists known runlevels. In debian runlevels 2-5 are similar,
not like described in man page. Example: Display managers installed themselves
with default
runleves and in LSB-header they declare to be Default-Start: 2 3 4
Package: fontforge
Version: 0.0.20080429-1
Severity: normal
Loading this font works fine:
http://sid.ethz.ch/debian/ttf-tomsontalks/ttf-tomsontalks-1.0/TomsonTalks.svg
But when I try to save it as sfd fontforge segfaults. The same happens
when I try to generate an otf font. This also happens
On Sun, Sep 28, 2008 at 4:24 PM, maximilian attems [EMAIL PROTECTED] wrote:
** Tainted: P (1)
your kernel is tainted try to reproduce without ur bug this
vendor to release free drivers.
Is it sufficient to just unload the module tainting the kernel
or do I have to do a clean start never
tags 500541 + moreinfo
tags 500541 + unreproducible
thanks
On Fri, Sep 26, 2008 at 01:18:43PM +0200, Hector Romojaro wrote:
Package: aolserver4
Version: 4.5.0-16
Severity: normal
*** Please type your report below this line ***
Hi,
The package gives the error just when it's installed
Package: subversion
Version: 1.5.1dfsg1-1
Severity: normal
svnadmin dump --incremental --deltas should give deltas against the
previous revision[*], but this is not the case:
ay:~ svnadmin dump -r25091 --incremental --deltas svn | wc -c
* Dumped revision 25091.
895059
ay:~ svn diff -c25091 wd |
retitle 500458 git-import-dsc: allow to import into empty repos
severity 500458 wishlist
thanks
git-import-orig imports into *empty* repos while git-import-dsc doesn't and
wants to create a new one. Should be fixed.
-- Guido
On Mon, Sep 29, 2008 at 12:59:19AM +0400, Nikita V. Youshchenko wrote:
# Automatically generated email from bts, devscripts version 2.10.35
# the package has been adopted, so the rationale here no longer applies even to
the older package version
severity 491889 normal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact
[Marcus Better]
Please migrate from libjdom0-java to libjdom1-java if possible, so
that the former (JDOM 0.9) can be phased out.
Does this require code changes in openjump?
There is a new version of openjump available from upstream, and it
might be a good idea to upgrade as well when this
Package: wnpp
Severity: wishlist
Owner: Philipp Huebner [EMAIL PROTECTED]
* Package name: structorizer
Version : 3.10
Upstream Author : Bob Fisch [EMAIL PROTECTED]
* URL : http://structorizer.fisch.lu/
* License : mostly LGPL, partially The GOLD Freeware
Package: gscan2pdf
Version: 0.9.26-1
Severity: important
For a while now, I noticed that I cannot save PDF files anymore.
I select Save, click OK, select a filename and hit OK, but the
generated file is empty, and the Saving PDF progress bar dialog
box never shows up.
Curiously, emailing as PDF
Package: debian-edu-install
Version: 0.673
Tags: l10n, d-i
Severity: wishlist
In attachment it is a chinese(zh_CN.UTF-8) translation of debian-edu-install,
I notice that there is no chinese translation of it.
For translation updates, please contact me directly.
--
Regards,
G
# Chinese
Here for d-l-e readers is the current NEWS.Debian text:
ttf-kochi (1.0.20030809-6) unstable; urgency=low
---
| Please use ttf-sazanami-{mincho,gothic}, instead of ttf-kochi |
It looks like I was hit by this bug. It is not really serious as
aptitude can recover by running configure again but it might help
explain what is going wrong.
Regards,
Kim
Setting up postgresql-client-8.3 (8.3.4-1) ...
Setting up postgresql-8.3 (8.3.4-1) ...
Starting PostgreSQL 8.3 database
Package: aolserver4-nsopenssl
Severity: important
--- Please enter the report below this line. ---
Hi,
Aolserver gives the following error when trying to load nsopenssl.so:
[29/Sep/2008:11:25:11][26356.3083773616][-main-] Notice: modload: loading
'/usr/lib/aolserver4/bin/nsopenssl.so'
reassign 476286 gjdoc
severity 476286 wishlist
retitle 476286 javadoc incompatible HTML output
thanks
Reassigning since this is not a bug in libjdom1-java.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Le lundi 28 juillet 2008 à 18:23 +0200, Xavier Bestel a écrit :
Just in case it helps:
[EMAIL PROTECTED]:~]$ gdb --args epiphany-browser --g-fatal-warnings
GNU gdb 6.8-debian
Copyright (C) 2008 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later
package config-manager
severity 493213 serious
thanks
pybaz has been removed from the archive, so I am upgrading this
bug to serious.
Ubuntu has already fixed this, I will provide a patch for Debian.
Thanks,
James
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
Please start gscan2pdf with the --debug option, try to save a PDF and
post the output from the command line.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: perdition
Version: 1.17.1-2
Severity: normal
Perdition exits with a signal 11 (segmentation fault) when ssl_mode is
not set and it recieves a starttls command on an imap connection. The
problem may exist for pop too, but I've not tested that. It can
be reporoduced easily by unsetting
Hi Gustavo,
in http://bugs.debian.org/416204 and
https://bugs.launchpad.net/bugs/271680 we requested that the
python-dateutil package in Debian and Ubuntu should use the system
tzdata files instead of the shipped obsolete copy. This will keep a
single reference of the pretty volatile tzdata
Hi,
On Mon, Sep 29, 2008 at 07:28:29AM +0200, Mike Hommey wrote:
On Mon, Sep 29, 2008 at 04:31:05AM +0200, Axel Beckert wrote:
*** glibc detected *** /usr/lib/xulrunner-1.9/xulrunner-bin:
munmap_chunk(): invalid pointer: 0x029e97f0 ***
=== Backtrace: =
Package: imp4
Severity: important
Tags: security, patch
Hi,
the following CVE (Common Vulnerabilities Exposures) id was
published for imp4.
CVE-2008-4182[0]:
| Cross-site scripting (XSS) vulnerability in imp/test.php in Horde
| Turba Contact Manager H3 2.2.1, and possibly other Horde Project
|
Paul Gevers wrote:
Package: daptup
Version: 0.7.1
Tags: l10n, patch
Severity: wishlist
Thanks
Please find attached the Dutch translation of the template for daptup. I
would be glad if you use it in the next upload.
Thanks for translation! I will include it.
--
Eugene V. Lyubimkin aka
tags 500114 patch
thanks
Hi
There is an upstream patch for this issue[0]. Could you please make sure
it reaches lenny via migration from unstable? I guess for stable (etch), you
could go via stable-proposed-updates.
Thanks in advance.
Cheers
Steffen
[0]:
Hi,
I would ask you to --purge and reinstall, it could be some transient local
error.
After purge and reinstall the problem is gone, it must be a transient
error as you said, thanks!
Cheers, Héctor
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Petter Reinholdtsen wrote:
Does this require code changes in openjump?
Possibly. The CHANGES file in JDOM 1.1 does not extend that far back,
but there are some more recent API breakages listed. Probably it is best
to convince upstream to upgrade.
On Wed, Apr 02, 2008, Mathias Behrle wrote:
I have here an application built on QT 3.3.8, that couldn't find the database
server any more with error:
QPSQL: Cannot connect to database
could not translate hostname postgres to address: Name or service not known
The application runs on a
Package: libdaemon0
Version: 0.10-1
Severity: grave
[ seen on 0.13-1 but I have no reason to believe older versions
are unaffected ]
Hi,
From an application here using libdaemon:
Sep 29 10:02:21 frodo nfschecker[26995]: open(/usr/var/run/nfschecker.pid): No
cuch file or directory
Sep 29
Package: kernel
Version: 2.6.18-6
When using external USB2 hard-disk, intensive I/O operations to the disk (such
as scanning my music collection or performing a file system check) will cause
the IRQ of the USB port to be disabled effectively stopping all file transfers
and forcing the
On Sun, Sep 28, 2008 at 05:37:07PM +0200, Alexandre Rossi wrote:
The machine freezes sometimes, repeatedly and it seems this happens under
some network load in a VE.
vcfgvalidate is all ok. The fail counts of user beancounters are all 0.
I presume the same problem on my server, but I cannot
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
tag 416204 patch upstream confirmed
forwarded 416204 [EMAIL PROTECTED]
user [EMAIL PROTECTED]
usertag 416204 + origin-ubuntu ubuntu-patch intrepid
thanks
Hello Guido,
Kurt Roeckx [2007-03-25 22:28 +0200]:
We already have an up-to-date version of this in the tzdata package.
It would be nice if
Package: pidgin
Version: 2.4.3-2
Severity: normal
Hi!
My pidgin crashes when I try to open the IM window for buddys for which
the logging option has been disabled in a previous session.
Workaround: delete the enable_logging options from the blist.xml.
I could provide coredumps etc. if told how
On Mon, 29 Sep 2008 14:38:03 +0900, Charles Plessy wrote:
Le Fri, Sep 26, 2008 at 01:19:37PM +0900, Atsuhito Kohda a écrit :
Do you set CHARACTER_SET:utf-8 somewhere or with Options Menu?
If not, I'd like to know if the above setting fixes the problem
or not.
(snip)
In the end, it did
Package: ipython
Version: 0.8.4-1
Severity: wishlist
Hi,
a new version of ipython is available, 0.9.1, at
http://ipython.scipy.org/.
Updating the debian package would be greatly appreciated.
Thanks!
Jan Geboers
-- System Information:
Debian Release: lenny/sid
APT prefers
Package: xen-utils-3.0.3-1
Version: 3.0.3-0-4
Severity: normal
Booting with pygrub doesn't work. First problem is the path to
libraries (/usr/lib/python is used instead of
/usr/lib/xen-3.0.3-1/lib/python):
$ /usr/lib/xen-3.0.3-1/bin/pygrub
Traceback (most recent call last):
File
Hi,
any news regarding the libdb-nvi issue?
regards,
-mika-
signature.asc
Description: Digital signature
Package: buildd.emdebian.org
severity 480710 important
retitle 480710 buildd.emdebian.org: avahi changes arguments to ./configure
thanks
One of the fixes for the cross-build failure was to add this section to
the Emdebian patch sets:
DEB_CONFIGURE_EXTRA_FLAGS += --enable-compat-libdns_sd
Package: apache2.2-common
Version: 2.2.9-7
Severity: important
Hi,
recently I upgraded from Etch to Lenny. Now apache2 doesn't start on
boot any more. With -x in /etc/init.d/apache2 I get following output
on boot (partial only, typos possible due to screenshot taken by a
camera and typed in
also sprach Jeffrey Ratcliffe [EMAIL PROTECTED] [2008.09.29.1224 +0200]:
Please start gscan2pdf with the --debug option, try to save a PDF and
post the output from the command line.
piper:~% gscan2pdf --debug
gscan2pdf 0.9.26
Using en_GB.UTF-8 locale
Gtk2-Perl version 1.190
Built for 2.12.10
Package: fping
Version: 2.4b2-to-ipv6-15
Followup-For: Bug #308695
fping removes any hosts which it fails to ping from the internal list.
If the host on which fping is running drops the default route and all
ping destinations have no route, fping terminates. But if there
is at least one host
On Mon, Sep 29, 2008 at 01:05, Simon Horman [EMAIL PROTECTED] wrote:
On Fri, Sep 26, 2008 at 12:57:44PM +0200, Ferenc Wagner wrote:
Package: heartbeat
Version: 2.1.3-6
Severity: wishlist
Hi,
Chkrootkit stumbles upon the hidden files under /usr/lib:
/etc/cron.daily/chkrootkit:
The
Sed silently ignores (or what it does? - no info) invalid
multibyte sequences in the input: no halt, no message,
no false exit-code.
This is unfortunate but expected. . does not match a bad sequence,
see the fast path for UTF-8 in lib/regexec.c's check_node_accept_bytes:
returning 0 means
Package: liblablgtksourceview-ocaml
Version: 0.2.1-2
Building the lablgtksourceview source should be possible with a non-standard
location of the lablgtk2 files.
For example, the libcairo-ocaml package looks for the LABLGTKDIR environment
variable.
The liblablgtksourceview-ocaml package just
Thomas Dickey dixit:
Without some charset in the document, or override via command-line or lynx
configuration, the file will be treated as ISO-8859-1. He seems to be
expecting lynx to treat it as UTF-8.
I think this is what recent (X)HTML/HTTP standards assume as well.
This is the reason I
Atsuhito Kohda dixit:
aqwa『~』$ lynx.cur --dump test.html
* é
*
This is very interesting:
[EMAIL PROTECTED]:~ $ lynx -dump test.htm
* é
* �
[EMAIL PROTECTED]:~ $ lynx -version
Lynx Version 2.8.7dev.9 (27 Apr 2008)
libwww-FM 2.14, SSL-MM 1.4.1, ncurses 5.6.20080830(wide)
Le dimanche 28 septembre 2008 à 20:51 +0200, Jörgen Tegnér a écrit :
The bugs report was incorrect, I forgot to reboot after a dist-upgrade.
Now everything works as it should. Apologies for any lost time you migth
have spent on this.
You can expect some problems if you don’t restart epiphany
Andrew Beekhof [EMAIL PROTECTED] writes:
On Mon, Sep 29, 2008 at 01:05, Simon Horman [EMAIL PROTECTED] wrote:
On Fri, Sep 26, 2008 at 12:57:44PM +0200, Ferenc Wagner wrote:
Chkrootkit stumbles upon the hidden files under /usr/lib:
/etc/cron.daily/chkrootkit:
The following suspicious files
On Sat, Sep 27, 2008 at 15:22:49 +0200, Josip Rodin wrote:
On Sat, Sep 27, 2008 at 02:53:46PM +0200, Julien Cristau wrote:
On Sat, Sep 27, 2008 at 14:48:42 +0200, Josip Rodin wrote:
Oh, and we already have one in 488669, but it's filed against the core
X server package. I'll leave it to
2008/9/29 martin f krafft [EMAIL PROTECTED]:
piper:~% gscan2pdf --debug
[...]
Thanks. It works fine here, and I can't see anything suspicious in the
output. Please try with compression set to none.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact
reassign 500552 linux-2.6 2.6.18-22
thanks
On Mon, Sep 29, 2008 at 01:17:15PM +0300, Andreas Modinos wrote:
When using external USB2 hard-disk, intensive I/O operations to the disk
(such as scanning my music collection or performing a file system check) will
cause the IRQ of the USB port to
Hello Martin,
in http://bugs.debian.org/416204 and
https://bugs.launchpad.net/bugs/271680 we requested that the
python-dateutil package in Debian and Ubuntu should use the system
tzdata files instead of the shipped obsolete copy. This will keep a
single reference of the pretty volatile
reassign 500464 debian-installer 20080522
tags 500464 pending
thanks
On Sunday 28 September 2008, Charles Plessy wrote:
after reading help, pressing enter does not manage to boot the
installer, but crashes with the following message:
Could not find kernel image: linux
I've committed a fix
1 - 100 of 334 matches
Mail list logo
