On Thu, Jan 03, 2008 at 10:30:29PM +0530, Y Giridhar Appaji Nag wrote:
Package: ltrace
Version: 0.5-3
Severity: important
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I am able to reproduce this consistently.
I have elinks yahoo.com running with pid 5292 and I do
$ ltrace -f -o
Package: gnome-mount
Version: 0.7-2
Severity: normal
The screen-shot that I will attach to this message after reporting it shows
the error that I get after inserting a usb stick while logged in to gnome.
-- System Information:
Debian Release: 5.0.1
APT prefers stable
APT policy: (500,
--- Please enter the report below this line. ---
I just swapped the millennium II with a ATI RAGE XL (atyfb module).
bterm still (mis-)behaves exactly the same as with matroxfb.
I start doubting the bterm problem is an issue with the matroxfb driver.
As a side note, loading atyfb does not
Package: nmap
Severity: important
Hi,
nmap has an internal copy of liblua and uses it instead of the system library
because the configure script fails to detect the header files:
} (package build log)
] checking lua.h usability... no
] checking lua.h presence... no
] checking for lua.h... no
]
Raphael Geissert atomo64+deb...@gmail.com writes:
I used glob because it was the simplest way to use brace expansion,
but it's ok, I will use split instead.
Cool, thanks! Sorry about being picky. And sorry to have taken so long
to review this stuff. I'm behind. :/
--
Russ Allbery
Package: nodm
Version: 0.3
Severity: wishlist
Tags: l10n patch
Russian debconf templates translation is attached.
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-1-amd64 (SMP w/4 CPU
Package: shorewall6
Version: 4.2.8-1
Severity: wishlist
Tags: l10n patch
Russian debconf templates translation update is attached.
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-1-amd64
Le samedi 09 mai 2009 à 20:36 -0700, Tom a écrit :
It is, for me at least, easily reproducible. If a network interface exceeds
about 400 MiB/s, gnome-system-monitor will just close without giving any
notice. If the network bit rate was 400 MiB/s at the time
gnome-system-monitor started, it
here is the screen-shot demonstrating the problem
attachment: snapshot1.png
Package: cryptkeeper
Version: 0.9.2-2
Severity: minor
Whenever I select to view a folder called All (Encrypted) located on my
Desktop, it shows the contents of the folder for a split second then
changes immediately and shows me the contents of my Desktop. I then have
to manually double click
Hi Leonardo,
On Sun, May 10, 2009 at 06:18, serraemeira leonardose...@hotmail.com wrote:
I've just installed my system with apt-get install kde-minimal and
Reportbug is one of the apps that
were installed during KDE installation. Hovewer, seems that reportbug has
problems.
rather odd,
Package: lintian
Version: 2.2.10
Severity: wishlist
The 3.0 Debian source package format introduces a new directory of source
control files and two files in that directory:
* debian/source/format contains a source format string on one line.
* debian/source/include-binaries lists binaries to
Package: lintian
Version: 2.2.10
Severity: wishlist
Presumably any program that warrants a desktop file (installed in the normal
applications directory, at least) also warrants a menu entry, unless the
desktop file is marked as being specific to KDE, GNOME, Xfce, etc.
This tag was requested a
Package: lintian
Version: 2.2.10
Severity: normal
Hi,
Lintian produces this informational point:
I: build-depends-without-arch-dep quilt
And explains that the only packages that should be listed in the
Build-Depends are those needed to run the clean target, like
debhelper. Unless I am missing
found 527910 1:3.1.0~rc2-1
thanks
Hi,
Thomas Florek wrote:
Package: openoffice.org-base
Version: 1:3.1.0-1
--- Please enter the report below this line. ---
I am one of the sid users mentioned by Chris Hildebrandt who noticed
^ ux.
this bug too and even before him
On Wed, May 06, 2009 at 04:23:35PM +, brian m. carlson wrote:
Also, SUSv3 is different from POSIX; TTBOMK, SUSv3 includes all the XSI
extensions, while POSIX leaves them as options.
Yes; policy currently specifies SUSv3.
--
Steve Langasek Give me a lever long enough and
package htop
retitle 526070 htop: by-process IO stats don't work
tags 526070 +upstream unreproducible
thanks
higuita wrote:
Hi again
Sorry for the delay replying
On Wed, 29 Apr 2009 14:36:18 +0300, Eugene V. Lyubimkin
jackyf.de...@gmail.com wrote:
htop 0.8 have support for showing
On 2009-05-09 23:16 +0200, Aurelien Jarno wrote:
Are you able to reproduce the problem with previous versions? 2.9-10 is
still on the mirrors for example.
Initially I had the problem with 2.9-9, but did not bother to report it
as 2.9-10 built successfully. Retrying today, 2.9-10 also fails
Hi,
thanks for your answer. Icoutils from git repository works fine to me.
Best regards Jan Fuchs
I was informed by the current maintainer of icoutils that he
integrated parts of my patch for the main source tree, along with
several bugfixes. I tested the icon attached with his
Package: sqlfairy
Version: 0.09004-1
I have found that the problem is a missing dependency
$ apt-file search Digest/SHA1.pm
libdigest-sha1-perl: /usr/lib/perl5/Digest/SHA1.pm
# apt-get install libdigest-sha1-perl
solve the problem
Ciao
Davide
--- System information. ---
Architecture: i386
tag 52 + pending fixed-upstream
forwarded 52 http://boinc.berkeley.edu/trac/ticket/854
thanks
On Sat, May 02, 2009 at 05:56:09PM +0200, Martin Michlmayr wrote:
Version: 6.2.18-4
User: debian-...@lists.debian.org
Usertags: ftbfs-gcc-4.4
Hi Martin, thanks for your bug report.
Your
I believe this is the intended behavior. I don't know of a good way
for bash to figure out what exactly constitutes a terminal control
sequence given a possible profusion of terminal types. As a result,
the user is expected to declare which parts of a prompt do not take up
any columns for such
Daniel Moerner dmoer...@gmail.com writes:
Lintian produces this informational point:
I: build-depends-without-arch-dep quilt
And explains that the only packages that should be listed in the
Build-Depends are those needed to run the clean target, like
debhelper. Unless I am missing
Package: projectcenter.app
Version: 0.5.0~20080704-1+b1
Severity: normal
ProjectCenter.app and the other GNUstep apps I've tested [TextEdit.app,
ProjectManager.app, et.al]
are broken on platforms newer than Debian Lenny.
Reason: Built against Lenny (stable) and breaks on Testing (Squeeze),
Package: docbook-xsl
Version: 1.75.0+dfsg-1
Severity: important
Hello,
when preparing a new exim4 upload I have found that docbook-xsl
1.75.0+dfsg-1 generates incomplete output:
--- 4.69-10/usr/share/doc/exim4-base/README.Debian
The traces you provide show that what's happening is actually that the
*, being expanded in a directory with no files, expands to the literal
'*', which is somewhat awkward with which to deal but which is
mandated by POSIX for /bin/sh:
From
Package: gnash
Version: 0.8.4-2
Severity: important
$ gnash -v http://english.pobediteli.ru/victors.swf
RcInitFile: parsing /etc/gnashrc
RcInitFile: couldn't open file: /home/username/.gnashrc
12276:3059296496] 12:10:18 SECURITY: Checking security of URL
On Sun, May 10, 2009 at 09:18:56AM +0200, Sven Joachim wrote:
On 2009-05-09 23:16 +0200, Aurelien Jarno wrote:
Are you able to reproduce the problem with previous versions? 2.9-10 is
still on the mirrors for example.
Initially I had the problem with 2.9-9, but did not bother to report it
Package: exim4-config
Version: 4.69-10
Severity: grave
I got this error updating exim4-daemon-light on un unstable machine. The
result was a machine without exim running.
When executing the command /usr/sbin/update-exim4.conf (automatically
started from /etc/init.d/exim4) I get an error from sed
Package: console-data
Priority: wishlist
Tags: l10n patch
Version:
.po attached
~~helix84
#
#Translators, if you are not familiar with the PO format, gettext
#documentation is worth reading, especially sections dedicated to
#this format, e.g. by running:
# info -n
Marc J. Driftmeyer wrote:
Version: 0.5.0~20080704-1+b1
This is the version in sid, and it works only on sid. It will migrate
to squeeze with the rest of the GNUstep stack when the transition is
complete (i.e. when all GNUstep packages get rebuilt against the new
GNUstep libraries).
On Sun, May 10, 2009 at 05:08:23AM +0200, Bernhard Kuemel wrote:
mplayer displays some (typically widescreen) movies off center/screen in full
screen mode. I have had black borders with non widescreen videos, too, but
not
typically that bad. Although one was displayed so low that the lower
forcemerge 527445 528007
On 2009-05-10 Giuseppe Sacco giuse...@eppesuigoccas.homedns.org wrote:
Package: exim4-config
Version: 4.69-10
Severity: grave
I got this error updating exim4-daemon-light on un unstable machine. The
result was a machine without exim running.
When executing the
* William Pitcock neno...@sacredspiral.co.uk [2008-02-04 14:03]:
Package: musictracker
Version: 0.4.1-1
This package is not in Debian. Did you mean pidgin-musictracker?
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a
On Sat, 09 May 2009 13:55:39 -0500 William Pitcock wrote:
It will have to go through NEW first.
Major package rearrangement, I suppose...
I can throw up 2.0-beta1 official
builds on a private repository if you want to test sooner.
I am not 100 % sure I will the find the time to test beta
Package: dbus
Version: 1.2.14-1
I use GNOME and metacity, and I can reproduce this bug.
See also bug 527860. These two bugs need merging, but I don't know
whether the actual problem lies with dbus or the X server.
- Josh Triplett
-- System Information:
Debian Release: squeeze/sid
APT
On Sa, 09 Mai 2009, Michael Biebl wrote:
Could you investigate if hald is started correctly when dbus is restarted and
running afterwards?
How can I check that? I cannot get access to a console and cannot ...
wait, maybe I can do on the console a
sleep 120 ; /etc/init.d/gdm stop
and
And here is another example:
# cat /sys/block/md2/md/mismatch_cnt
128
on another box, partitioned in a different manner, with swap outside the
arrays:
# cat /proc/mdstat
Personalities : [raid1]
md8 : active raid1 sda12[0] sdb12[1]
31085632 blocks [2/2] [UU]
md7 : active raid1 sda11[0]
tag 468077 +moreinfo unreproducible
severity 468077 normal
thank you
You didn't specify what are contents of your sieve script and what you
are exactly
doing to enable it.
Vacation system works just fine @ my site.
Also since you have reported bug to wrong package, what is the version of
Package: pinot
Severity: wishlist
Hi,
As subject says, please package a newer upstream release.
Versions 0.90 and newer has improved unicode support, according to
upstream changelog.
Would you be interested in me teaminig up with you to help maintain this
package?
Despite my non-Debian email
* Mark Whitis whi...@freelabs.com [2009-04-20 13:43]:
Package: xmlcopyeditor
Version: 1.0.7.6-getdeb1
Package is 2-1/2 years out of date.
Upstream version: 1.2.0.4 2009-04-10
Package version 1.0.7.6 2006-09-25
There's no such package in Debian. Are you sure you saw
xmlcopyeditor 1.0.7.6
Package: gimp
Version: 2.4.7-1
Severity: important
The script-fu console crashes with segmentation fault if the following
command is executed:
(let* (theNum 10) (set! theNum (+ theNum theNum)) )
The command has syntax error, the correct command would be
(let* ( (theNum 10) ) (set! theNum (+
On Sun, May 10, 2009, Loïc Minier wrote:
I've filed a bug against apt to request APT::Get::AutomaticRemove=true
to work in dist-upgrade.
For now I've pushed a couple of changes to pbuilder.git to drop
APT::Get::AutomaticRemove=true and call apt-get autoremove explicitely.
Cheers
--
Ondřej Surý napsal(a):
tag 468077 +moreinfo unreproducible
severity 468077 normal
thank you
You didn't specify what are contents of your sieve script and what you
are exactly
doing to enable it.
Vacation system works just fine @ my site.
Also since you have reported bug to wrong package, what
On 2009-05-09 12:00:34 +0200, Santiago Vila wrote:
This is a backwards compatibility issue more than a data loss thing,
as unzip is still able to unpack those odd zipfiles.
OK, I now remember that upstream handled the issue in unzip.
--
Vincent Lefèvre vinc...@vinc17.org - Web:
I wrote a small patch for this bug:
===
--- /usr/sbin/update-exim4.conf.orig2009-05-02 09:57:17.0 +0200
+++ /usr/sbin/update-exim4.conf 2009-05-10 10:32:40.0 +0200
@@ -150,7 +150,7 @@
# add localhost, get rid of spaces, trailing
On Sun, May 10, 2009, Junichi Uekawa wrote:
Actually, pbuilder update sets APT::GET::AutomaticRemove=true and
should already be doing that, which version of pbuilder are you
running?
In apt, DoAutomaticRemove() is only called from DoInstall() (which is
called for apt-get install, remove,
reassign 455705 etckeeper
stop
Hi
On Wed, Dec 12, 2007, Alberto Maurizi wrote:
It seems that the problem was more general: apt-upgrade was
found to do the same (hanging).
However I think this is related to some bad interaction with
etckeeper, which is
Package: apt
Version: 0.7.21
Severity: wishlist
Hi
In pbuilder, we attempted to drop unused packages automatically via:
-o APT::Get::AutomaticRemove=true
which we added to the apt-get dist-upgrade call; this doesn't work
because in apt, DoAutomaticRemove() is only called from
On Mon, Apr 13, 2009 at 04:04:29PM -0400, Tom Metro wrote:
Filippo Giunchedi wrote:
...how about hinting about a debian-specific behavior and pointing the user
to README.Debian from the manpage ?
I've seen that done, where a paragraph is tacked on near the end of man
pages that notes there
On Sun, 10 May 2009 11:34:28 +0200, Jonas Smedegaard wrote:
Package: pinot
Severity: wishlist
Hi,
Hello,
As subject says, please package a newer upstream release.
Versions 0.90 and newer has improved unicode support, according to
upstream changelog.
I've been having several FTBFS in
On 2009-05-09 22:41:37 +0200, Santiago Vila wrote:
The authors suggest that you run zip -FF on the defective archive, like this:
zip -FF file.zip --out fixed.zip
When Ed Gordon asked me to do this test in January, it didn't work.
But perhaps this was fixed in the new unzip version (since,
On Sat, 2009-05-09 at 20:50 -0700, Russ Allbery wrote:
-.BR \-\-section release
+.BR \-\-section release[,release[,...]]
When scanning for packages in the distdir, select only packages from
-section
+section(s)
[...]
A comma-separated set of archive areas (which
also aren't releases; the
Correct link for 0.30-2 log is
http://piuparts.debian.org/squeeze/bugged/shared-mime-info_0.30-2.log.
Problematic files (from the bottom of that log):
0m27.4s ERROR: FAIL: Package purging left files on system:
/usr/share/mimeowned by: shared-mime-info
/usr/share/mime/x-epoc
Package: debian-maintainers
Version: 1.56
Severity: normal
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
as suggested on the wiki page:
http://wiki.debian.org/Maintainers#Annualping
please consider this as a slightly late ping.
I'm always working on some Perl packages, especialy
Package: gimp
Version: 2.6.6-1
Hello,
I am trying to install gimp on debian/unstable (recently updated
dist-upgraded) and there are broken dependencies):
r...@aspirex1700:~# apt-get install gimp
Reading package lists... Done
Building dependency tree
Reading state information...
I am forwarding this bug to upstream as he might be interested in implementing
it.
On Mon, Apr 13, 2009 at 03:51:54PM -0400, Tom Metro wrote:
...anyhow it can be considered as an option to the debian wrapper.
Right, I could see it still being useful as a matter of convenience, as
long as
tags 519006 + patch
thanks
On Thu, 09 Apr 2009, I wrote:
/usr/bin/cc -g -O2 -g -Wall -O2
CMakeFiles/wbxml2xml.dir/wbxml2xml_tool.o
CMakeFiles/wbxml2xml.dir/attgetopt.o -o wbxml2xml -rdynamic
../src/libwbxml2.so.0.0.13 -lexpat
/usr/bin/ld: non-dynamic relocations refer
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sun, May 10, 2009 at 12:12:24PM +0200, David Paleino wrote:
On Sun, 10 May 2009 11:34:28 +0200, Jonas Smedegaard wrote:
As subject says, please package a newer upstream release.
Versions 0.90 and newer has improved unicode support, according to
Package: nodm
Version: 0.3
Severity: wishlist
Tags: l10n patch
-- System Information:
Debian Release: 5.0.1
APT prefers proposed-updates
APT policy: (500, 'proposed-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686-bigmem (SMP w/2 CPU cores)
Locale:
On Sun, Apr 26, 2009 at 03:39:42PM -0400, Barry deFreese wrote:
This package is now WAAAY out of date. Do you still plan on adopting
it? If not I will be filing a removal request very shortly. It now has
no r(b)depends.
Sorry for the late answer. I'm not planning to use (and adopt) fv
On Sun, 10 May 2009 12:40:09 +0200, Jonas Smedegaard wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
You know you should go and change your key, right? ;)
On Sun, May 10, 2009 at 12:12:24PM +0200, David Paleino wrote:
On Sun, 10 May 2009 11:34:28 +0200, Jonas Smedegaard wrote:
[..]
Package: kernel-package
Version: 12.013
Severity: normal
Hi, I may have set flags wrong, but I am trying to *quickly* build a
kernel for an old PII-266 using a nearby amd64 machine.
I had copied the .config from the PII-266 machine to the
/usr/src/linux-2.6-2.6.30~rc5 directory and run:
Dan,
Will you please provide the log files that I requested? This bug is
probably very easy to fix with the backtraces; it's impossible to fix
without them.
--
Steve Langasek Give me a lever long enough and a Free OS
Debian Developer to set it on, and I can
Package: manpages
Version: 3.21-1
Severity: normal
Tags: patch
Hello,
pam_unix, with the nullok_secure option uses /etc/securetty for a slightly
different purpose than documented in securetty(5).
securetty(5) could also be completed to indicate that PAM also support
securetty (with
OoO En cette soirée bien amorcée du jeudi 07 mai 2009, vers 22:56,
Daniel Schepler dschep...@gmail.com disait :
Package: textpattern
Version: 4.0.6-3
Severity: serious
From my pbuilder build log:
...
dh_link usr/share/javascript/jquery/jquery.js
Package: yelp
Version: 2.22.1-8+b1
Severity: normal
Running
env LANG=C yelp
gives me a yelp window. Now pressing F1 or executing Help-Contens
does not open a contents view but gives a window with the text:
Unable to laod page
The requested URI gelp:user-guide#yelp is invalid
And I can only
I'm forwarding this upstream as the author might be interested.
On Fri, Nov 14, 2008 at 09:07:25AM +0100, martin f krafft wrote:
Package: autossh
Version: 1.4b-1
Severity: wishlist
autossh logs to syslog, which makes little sense as it's per-user.
Please use syslog only if e.g. --syslog
Package: libsqlite3-0
Version: 3.6.13
sqlite3 is not compiled with -DSQLITE_SOUNDEX=1.
such preprocessor flag should be added to debian/rules DEB_OPT_FLAG
I suggest to enable it since it doesn't harm, it just makes soundex()
SQL function available.
Regards,
--
Fabio Erculiani
Sabayon Linux -
Package: easytag
Version: 2.1.4-1.1
Severity: minor
When exiting EasyTAG it asks the user to confirm. When I say no here,
the main window disappears and EasyTAG asks me again if I really want to
quit. Say no again and EasyTAG is gone. Not quite what I'd expect.
:-)
Regards
Jan
-- System
Am Sonntag, den 10.05.2009, 10:02 +0200 schrieb Andreas Metzler:
when preparing a new exim4 upload I have found that docbook-xsl
1.75.0+dfsg-1 generates incomplete output:
[snip]
The file is generated by running
xsltproc --nonet --stringparam section.autolabel 1 \
-o
Package: zope-common
Version: 0.5.47
Severity: serious
User: debian...@lists.debian.org
Usertags: piuparts piuparts.d.o
Hi,
during a test with piuparts I noticed your package left unowned files on the
system after purge, which is a violation of policy 6.8:
Package: gambas2-runtime
Version: 2.12-2
Severity: serious
User: debian...@lists.debian.org
Usertags: piuparts piuparts.d.o
Hi,
during a test with piuparts I noticed your package left unowned files on the
system after purge, which is a violation of policy 6.8:
Package: stow
Version: 1.3.3-2.1
Severity: serious
User: debian...@lists.debian.org
Usertags: piuparts piuparts.d.o
Hi,
during a test with piuparts I noticed your package left unowned files on the
system after purge, which is a violation of policy 6.8:
reopen 527025
tags 527025 -moreinfo
severity 527025 minor
thanks
On Wed, May 06, 2009 at 06:45:35AM +0200, Christian Perrier wrote:
However, what about the good old smbpasswd? It also lives in private
dir.
Also not configuration; it really belongs in /var/lib as well, but it's
kept in
Package: erlang-base
Version: 1:12.b.5-dfsg-3
Severity: wishlist
Erlang 5.7.1/OTP R13B is out, but the version of Erlang/OTP in sid is
currently stuck at R12B-5, which is from about six months ago
according to [1]. The new version supposedly [2] has better SMP
performance and Unicode support,
Package: libasound2-plugins
Version: 1.0.19-2
Severity: normal
No matter what I try, alsa does not pick up the pulse plugin:
$ cat /etc/asound.conf
pcm.pulse {
type pulse
}
ctl.pulse {
type pulse
}
$ aplay -Dpulse /usr/share/sounds/phone.wav
ALSA lib pcm.c:2075:(snd_pcm_open_conf)
Subject: z60_libsane.rules
Package: libsane
Version: 1.0.19-26
Severity: normal
The udev rules for libsane use the 'SYSFS' interface, which has been
deprecated.
Results in this message at boot time:
[ 15.172343] udev: deprecated sysfs layout; update the kernel or disable
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sun, May 10, 2009 at 12:48:21PM +0200, David Paleino wrote:
On Sun, 10 May 2009 12:40:09 +0200, Jonas Smedegaard wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
You know you should go and change your key, right? ;)
No, I do not know - is
http://groups.google.com/group/qepupydim676/ [1]
Conrtol yoour moood and feeel freee froom sandess!
Hi,
I think might have been some kind of misunderstanding.
This bug is not closed.
I've tested upstream revision 966017.
bye,
thomas (member of kile dev team)
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
tags 527726 +patch sid squeeze
thanks
This bug does not affect lenny but does affect both sid and squeeze.
The fix is trivial, just add '2#include limits.h to the list of
includes in src/get.c
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of
Okay, I've been looking a bit deeper into it, and that's what I was able to
find:
This heavily looks like /usr/lib/pulse-0.9/modules/module-alsa-sink.so ...
This is wrong, module-hal-detect.so was the culprit in my case, autoloading
the detected alsa sound card with hw:* access. So one
Quoting Thomas Mueller (thomas_mueller_...@online.de):
Package: nodm
Version: 0.3
Severity: wishlist
Tags: l10n patch
The very first line of the file has a weird character at its very
beginning and msgfmt chokes on it .
Corrected file attached.
de.po
Description: application/gettext
I accidently found a more reasonable workaround for this. Adding the
option NoDri to xorg.conf fixes the display corruption problem. No
need for multiple starts.
Joe
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
severity 528021 wishlist
retitle 528021 please purge /usr/local/share/texmf if empty
thanks
On Sun, 10 May 2009, Holger Levsen wrote:
during a test with piuparts I noticed your package left unowned files on the
system after purge, which is a violation of policy 6.8:
package: newlib-mingw32
version: 1.17.0-2
severity: serious
Hi,
you packages places all files inside /usr/local/i586-mingw32msvc/include/
which is a violation of the FHS and debian policy, see for example
http://www.debian.org/doc/debian-policy/ch-opersys.html#s9.1.2
found via apt-file search
Package: linux-image-2.6.29-1-686
Version: 2.6.29-3
Justification: breaks the whole system
Severity: critical
I wonder if this is the same thing Neil Brown refers to, here:
http://www.spinics.net/lists/raid/msg23053.html
The syslog shows first 97 of these:
,
| May 10 02:10:05
On Sun, May 10, 2009, Loïc Minier wrote:
I've filed a bug against apt to request APT::Get::AutomaticRemove=true
to work in dist-upgrade.
#528011
--
Loïc Minier
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
Matthias, could you please explain what was the problem precisely and
what happened in 4.3.3-8 that solved the issue? I need to know because
of #527367 which the submitter claims has similar causes and solution.
--
Ludovic Brenta.
--
To UNSUBSCRIBE, email to
Hello,
I've also been hit by the same problem. I'm starting my X session
using a simple startx. It crashes with a segfault. If I remove
use-session-dbus from the /etc/X11/Xsession.options file, everything
works fine. It did not happen before I upgraded dbus this morning. What
is funny,
Package: openoffice.org-base
Version: 1:3.1.0-1
--- Please enter the report below this line. ---
Appreciate your prompt reply, Rene, even on holy sunday and your
additional comments that I sympathize with like, by the way, I assume,
Chris too ;). Anyway ...
I verified the reported bug
Hi, and sorry for my ignorance about debian update policy, but any
idea when this will get fixed in testing? Is there a link with how
things get from unstable to testing for obvious bugs that get fixed?
Cheers
Anton
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a
* Johan Bilien [090510 13:40 +0200]
Package: libasound2-plugins
Version: 1.0.19-2
Severity: normal
No matter what I try, alsa does not pick up the pulse plugin:
$ cat /etc/asound.conf
pcm.pulse {
type pulse
}
ctl.pulse {
type pulse
}
$ aplay -Dpulse
Package: easytag
Version: 2.1.4-1.1
Severity: minor
I'm using EasyTAG with an older ThinkPad subnotebook that has only
1024x768 resolution. The user interface is too large to fit on the
screen, especially the tag information eats up way too much vertical
space. This results in the log being
Package: googleearth-package
Version: 0.5.6
Severity: important
Hi,
When running googleearth, I get the following error:
$ googleearth
/usr/lib/googleearth/googleearth-bin: symbol lookup error: libssl.so.0.9.8:
undefined symbol: EVP_idea_cbc
Renaming libcrypto.so.0.9.8.moved.for.workaround
Hi,
I gave the wrong reference, the right one is:
http://www.debian.org/doc/debian-policy/ch-opersys.html#s9.1.2
I recommend you read the whole of 9.1.2.
regards,
Holger
signature.asc
Description: This is a digitally signed message part.
Hi Norbert,
On Sonntag, 10. Mai 2009, prein...@logic.at wrote:
1m32.5s ERROR: FAIL: Package purging left files on system:
/usr/local/share/texmf not owned
Aehm, wrong. That is not a file under dpkg control. There is a
different bug report about that we have to create
Package: geeqie
Version: 1.0~alpha3-4
Severity: normal
I like the way how geeqie folds the same images with different suffix
but I consider awkward that delete will remove all of them when the
first image is selected. I would like to have them deleted all if the
fold collapsed but the only one
Package: xrdp
Version: 0.4.0~dfsg-9
Severity: normal
Tags: patch l10n
LANG environment variable is not exported in sessions started by xrdp.
The lack of this variable results in (partially) untranslated desktop
environments.
Kde4 presents a peculiar partial translation: half of the desktop
1 - 100 of 377 matches
Mail list logo