El miércoles 10 de junio, Guido Günther escribió:
On Fri, Jun 05, 2009 at 11:03:32AM +1000, Felipe Sateler wrote:
El viernes 5 de junio, Guido Günther escribió:
On Thu, Jun 04, 2009 at 07:43:53PM +1000, Felipe Sateler wrote:
Package: git-buildpackage
Version: 0.4.53
Severity:
Toni Mueller wrote:
And FWIW, the end of week also doesn't
seem to draw any nearer since mid-April.
err, not my fault that 5.1.0 took so long. and yes, 5.1.0 was uploaded
some days ago...
--
Address:Daniel Baumann, Burgunderstrasse 3, CH-4562 Biberist
Email:
Hi,
why exactly was this bug tagged wontfix? It is not only that the host does not
support IPv6 (which is the problem in the bug report you merged this one with)
but rather that it actively breaks and wrongly interprets an address if the
resolver is configured to resolve IPv6 hosts.
I’m not used
Package: guessnet
Version: 0.49-1
Severity: grave
Justification: renders package unusable
guessnet is known to work on i386/lenny, however on amd64 it segfaults (see
syslog below).
no network interface is configured with guessnet, therefore one has to use hand
editing
to select the suitable
Package: acpitool
Version: 0.5-3
Severity: normal
Before the acpitool change to use /sys it wouldn't even recognize the
power supply anymore (it did before the change to the 2.6.29 kernel).
Using /sys it sayeth:
merkur:~# acpitool -B
Battery #1 : present
Remaining capacity : unknown,
Package: gcompris
Version: 8.4.12-1
Severity: normal
There is a typo in the gstreamer0.10-alsa dependency: it reads
gsgstreamer0.10-alsa. The initial gs should be removed.
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable')
Package: quiteinsane
Version: 0.10-14
Severity: minor
When I scan a page, then quit the application, it reports,
$ quiteinsane
Segmentation fault
$
Mark
-- System Information:
Debian Release: 5.0.1
APT prefers stable
APT policy: (600, 'stable'), (50, 'testing'), (40, 'unstable'), (30,
Package: viewvc
Version: 1.0.5-0.2
Severity: normal
Dear David et al.,
Is it possible for you to package viewvc 1.1.1? I realise that this
represents a major release and may require some reworking of the
Debian-specific files, but I think the benefits of the new version
outweigh the pain!
If I
Further information: from gdb I get the enclosed backtrace.
I'd be happy to install given extra -dbg packages and retry.
Mark
m...@evangeline:~$ gdb quiteinsane
GNU gdb 6.8-debian
Copyright (C) 2008 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later
Hi.
I must apologize for my previous post: I was using reportbug and it didn't
show the full history of the bug which I had selected (which led me to believe
that the original report hadn't been taken care of...).
[Nevertheless it's fairly misleading that reportbug doesn't provide the
full
Package: pure-ftpd-common
Version: 1.0.21-11.4
Severity: wishlist
Tags: patch
Please include a geoip support for pure-ftpd.
Patch can be found on pure-ftpd homepage:
http://download.pureftpd.org/pub/pure-ftpd/patches/pureftpd-geoip/
-- System Information:
Debian Release: 5.0.1
APT prefers
Mark T.B. Carroll m...@ixod.org wrote:
Hi,
When I scan a page, then quit the application, it reports,
$ quiteinsane
Segmentation fault
Try disabling the net backend in /etc/sane.d/dll.conf or upgrade
libsane to = 1.0.19-25.
If that doesn't fix it, then it's a quiteinsane bug :)
JB.
--
Package: linux-image-2.6.30-rc8-amd64
Version: 2.6.30~rc8-1~experimental.1~snapshot.13724
Severity: normal
Since upgrading from rc5 to rc8, the volume levels of my soundcard
output are so low that I cannot hear anything anymore, even with all
the jogs yanked to 100%.
This is possibly related to
On Wed, Jun 10, 2009 at 13:55:28 +0200, Jan Willem Stumpel wrote:
BTW you closed the bug, I suppose because it is not an
xserver-xorg bug. But isn't it an xserver-xorg bug that the Xorg
log says that DontZap is off, while in fact it is on?
I closed the bug because there's no bug here.
Sorry, the correct patch is below :
**
--- worker.c.org2007-12-03 23:06:05.0 +0100
+++ worker.c2009-06-10 14:32:05.0 +0200
@@ -328,6 +328,7 @@
int dim_pfd = 0;
bool
* Michael Hanke michael.ha...@gmail.com [2009-06-09 13:45]:
Next step is to see whether the bug shows up while compiling the full
package -- let's see how long that takes. Alternatively, if anyone has
access to a more powerful ARM machine, I'd be very grateful for a test
run!
I didn't do a
Package: xorg
Version: 1:7.3+18
Severity: normal
-- System Information:
Debian Release: 5.0.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.28.4 (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell:
On Wed, Jun 10, 2009 at 02:36:14PM +0200, Martin Michlmayr wrote:
* Michael Hanke michael.ha...@gmail.com [2009-06-09 13:45]:
Next step is to see whether the bug shows up while compiling the full
package -- let's see how long that takes. Alternatively, if anyone has
access to a more
Package: lsat
Version: 0.9.7.1-1
Severity: normal
Tags: patch
On SunOS 5.10 checknet module doesn't work:
awk: can't open length($1) 0 {print $1}
I changed the shellcode:
* it sorts results numerically instead of using AWK
* it passes -n to netstat to avoid long lookups
--- checknet.c.orig
Julien BLACHE jbla...@debian.org writes:
Try disabling the net backend in /etc/sane.d/dll.conf or upgrade
libsane to = 1.0.19-25.
New versions are:
ii gocr 0.45-2A command line OCR
ii libc6 2.9-12GNU C Library: Shared libraries
ii
Package: postgresql-autodoc
Version: 1.31-1
Severity: wishlist
There is a new upstream release 1.40. Please package it.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Aurelien, can you take a look at this bug report?
* Axel Allende Lira axell...@gmail.com [2009-06-10 04:14]:
bootstrap inside loop mounted hd image, and then booting it with a third
party
kernel. I installed linux-image-2.6.26-2-versatile after the
bootstrapping was
complete so I could
Package: psi
Priority: minor
Currently, when logging in, the status is automatically set to `Online'
In the preferences, it should be possible to set a default status of `Do
not disturb' or any of the other possible values
A variation of this would allow the user to preserve status from
After doing a bit of looking on the web I can rule out what seems to be
a common source of this kind of error -- I'm not trying to run this over
ssh.
On the other hand, I'm also experiencing bug#524871, and the timing is
suspicious since I recently rebooted my system. Perhaps that's the
source
On Wed, Jun 10, 2009 at 02:52:14PM +0200, Martin Michlmayr wrote:
Aurelien, can you take a look at this bug report?
* Axel Allende Lira axell...@gmail.com [2009-06-10 04:14]:
bootstrap inside loop mounted hd image, and then booting it with a third
party
kernel. I installed
Package: psi
Priority: minor
When changing the status to `Unavailable', `Away', etc, psi prompts the
user to supply a descriptive status message or choose a preset.
It should be possible to specify that one of the preset values is
re-used without prompting.
--
To UNSUBSCRIBE, email to
Package: wnpp
Severity: wishlist
Owner: Michael Hanke michael.ha...@gmail.com
* Package name: garmindev
Version : 0.2.0
Upstream Author : Oliver Eichler oliver.eich...@gmx.de
* URL : http://www.qlandkarte.org
* License : GPL
Programming Lang: C++
Package: directfb
Severity: wishlist
As most used libraries, I think it could be useful to provide the -dbg
packages with debuggin symbols also for this package.
Many thanks for paying attention.
P.S. (new upstream is available too)
--
ESC:wq
--
This message has been scanned for
Hi Winnie,
On Tue, Jun 09, 2009 at 11:30:44PM +0200, Patrick Winnertz wrote:
Hello,
is there any progress? This would be very important as qlandkarte is
terminated and this is the newer tool.
Hope to hear from you soon.
Good timing -- I just ITP'ed GarminDev, which is the missing piece
Package: bluez-utils
Version: 4.40-2
Severity: important
It seems that DUND options are missing from /etc/default/bluetooth. In
/etc/init.d/bluetooth it mentions:
# startup control over dund and pand can be changed by editing
# /etc/default/bluetooth
I added the options back from last version
-BEGIN PGP SIGNED MESSAGE-
Hash: RIPEMD160
Package: libpam-ldap
Severity: wishlist
Version: 184-4.3
Tags: l10n patch
Hi,
I updated Japanese translation of debconf messages (ja.po).
Please apply this.
Thanks,
- --
Kenshi Muto
km...@debian.org
-BEGIN PGP SIGNATURE-
Version:
Package: xserver-xorg
Version: 1:7.4+2
Severity: critical
--- Please enter the report below this line. ---
This bug report is not being submitted from the machine the bug is on so
disregard the package information. The machine the bug is on is severely
broken due to
trying to install
Package: evince
Version: 2.26.1-2
Severity: normal
I'm not sure if it happens in every document, but it's rather consistant
with http://sipper.agnity.com/docs/sipper_book.pdf
If I start a search for some text, then the blue boxes that should be
drawn around the text are placed incorrectly. The
This bug is reproducable, but this time I closed googleearth I've
slightly different syslog messages:
Jun 10 17:02:44 salmin kernel: [82713.786255] [drm:radeon_cp_idle]
*ERROR* radeon_cp_idle called without lock held, held 0 owner
8800780a02c0 8800780a05c0
Jun 10 17:02:44 salmin kernel:
Hi Daniel,
On Wed, Jun 10, 2009 at 02:10:27PM +0100, Daniel Pocock wrote:
When changing the status to `Unavailable', `Away', etc, psi prompts the
user to supply a descriptive status message or choose a preset.
It should be possible to specify that one of the preset values is
re-used
Package: wnpp
Severity: wishlist
Owner: Stefano Zacchiroli z...@debian.org
* Package name: python-peak.util
Version : 20090610
Upstream Author : Philip J. Eby peak at eby-sarna com
* URL : http://peak.telecommunity.com/
* License : dual-license: Python license
Please suggest such wishlist items directly to upstream (see
http://psi-im.org, though the forums seem to be down at the moment). I'm
not going to deviate from the upstream source unless it's necessary for
debian specific requirements or to quickly fix critical bugs.
I'm not asking for a
severity 532623 grave
kthxbye
On Wed, Jun 10, 2009 at 09:52:00 -0400, Brent S. Elmer Ph.D. wrote:
This bug report is not being submitted from the machine the bug is on
so disregard the package information. The machine the bug is on is
severely broken due to trying to install xserver-xorg
Package: w-scan
Severity: wishlist
Please update w-scan to the latest version (20090528)
Changes since latest version available in debian:
ChangeLog:
2009-05-23
- added S160E (requested by realkano)
- using configure scripts now. If anybody can help improving configure
Package: kfreebsd-image-7.2-1-amd64
Version: 7.2-1
Severity: grave
Justification: renders package unusable
Starting with kernel 7.2, upstream has changed the way a binary type is
detected. This prevent 32-bit binaries to work.
On kFreeBSD 7.1, the following tests are done (in this order):
- ELF
What is it doing when it hangs? Add 'set -x' at the top of
/var/lib/dpkg/info/xserver-xorg.postinst and run dpkg --configure -a.
It ends with:
+ dpkg --compare-versions 1:7.3+18 lt 1:7.4
+ invoke-rc.d hal restart
Package: wnpp
Severity: wishlist
Owner: Jakub Wilk uba...@users.sf.net
* Package name: gmic
Version : 1.3.0.2
Upstream Author : David Tschumperle
* URL : http://gmic.sourceforge.net/
* License : CeCILL License, version 2.0
Programming Lang: C++
Description
Hi,
I have written another patch for this problem.
This one changes the behavior of mutt:
- no longer send bcc header to MTA
- save bcc header if write_bcc is true
The patch should apply to an unpacked 1.5.19-4 package.
regards
Stefan
diff --git
On Wed, 2009-06-10 at 16:00 +0200, Julien Cristau wrote:
severity 532623 grave
kthxbye
What is it doing when it hangs? Add 'set -x' at the top of
/var/lib/dpkg/info/xserver-xorg.postinst and run dpkg --configure -a.
Cheers,
Julien
Setting up xserver-xorg (1:7.4+2) ...
+ .
Package: sun-java6-jre
Version: 6-13-1
Severity: normal
File: sun-java6
I use Cobertura 1.9 to evaluate the coverage of my project with unit tests.
Whereas everything goes fine with 6-13-1, my ant target crashes with 6-14-1
with an exception on flie locker. This is clearly not related to my own
Hi,
On Wed, 10.06.2009 at 14:09:00 +0200, Daniel Baumann dan...@debian.org wrote:
Toni Mueller wrote:
And FWIW, the end of week also doesn't
seem to draw any nearer since mid-April.
err, not my fault that 5.1.0 took so long. and yes, 5.1.0 was uploaded
some days ago...
I can't see
On Wed, 2009-06-10 at 16:00 +0200, Julien Cristau wrote:
severity 532623 grave
kthxbye
Setting up xserver-xorg (1:7.4+2)
What is it doing when it hangs? Add 'set -x' at the top of
/var/lib/dpkg/info/xserver-xorg.postinst and run dpkg --configure -a.
Cheers,
Julien
Here is the
On Fri, Mar 14, 2008 at 12:24:19PM +0100, Frans Pop wrote:
Package: grub-installer
Version: 1.55
Severity: important
Currently no user parameters (such as kernel parameters, vga=, quiet) are
included in the generated configuration file for grub2.
This is a blocker for making grub2
Package: wnpp
Severity: wishlist
Owner: Chow Loong Jin hyper...@ubuntu.com
* Package name: geanydoc
Version : 0.3
Upstream Author : Yura Simashka yura...@gmail.com
* URL : http://plugins.geany.org/geanydoc/
* License : GPL-3+
Programming Lang: C
Package: nautilus
Version: 2.24.2-3
Severity: normal
Hi there, for the longest time I've used
desktop_is_home_folder with nautilus. Today I decided to
revert to the default so I flipped the gconf value and
restarted nautilus. To my surprise nautilus continued to
render $HOME onto the desktop.
I
Package: wnpp
Severity: wishlist
Owner: Chow Loong Jin hyper...@ubuntu.com
* Package name: geanydoc
Version : 0.4
Upstream Author : Yura Siamashka yura...@gmail.com
* URL : http://plugins.geany.org/geanydoc/
* License : GPL-3+
Programming Lang: C
Package: eeepc-acpi-scripts
Version: 1.1.0
Severity: normal
Tags: patch
Hello,
I had some problems with my Eee PC 901, that does not have a bluetooth
kill switch in /proc/ or /sys/: even if there is a modprobe-based
fallback, pressing the corresponding hotkey always left it enabled.
I finally
On Wed, Jun 10, 2009 at 12:50:33PM +1000, Felipe Sateler wrote:
Well, - in upstream version nambers should be reasonably common in -rc -alpha
or such. And your original regex allows it in orig but not in plain upstream.
So iff we add '-' we'd need something like:
Stefan Völkel wrote:
Hi,
I have written another patch for this problem.
This one changes the behavior of mutt:
- no longer send bcc header to MTA
- save bcc header if write_bcc is true
The patch should apply to an unpacked 1.5.19-4 package.
Thanks Stefan,
I will see if this can be
Package: pyton-qt4
Version: python-qt4
Severity: important
After upgrade I've got this message:
sal...@salmin:~$ sudo apt-get install python-qt4
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you
Package: amarok
Version: 1.4.10-3+b1
Severity: wishlist
For the collection, you can group by artist, album, etc. For the
iPod, there are no such options, and it is difficult to browse a large
iPod collection as a result.
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
Package: elmerfem
Version: 5.5.0.svn.4190.dfsg-3
Severity: normal
When running in parallel, mesh partitioning doesn't work, because the
Metis-compatible Scotch interface doesn't have elemental partitioning.
Please add 2 to the default ElmerGrid command line in ElmerGUI to
make nodal partitioning
Package: elmerfem
Version: 5.5.0.svn.4190.dfsg-3
Severity: wishlist
Greetings,
If a user moves around the .xml files in /usr/share/ElmerGUI/edf, they
could be left behind during package upgrade or removal. Ideally, the
package should keep track of which modules are and are not active (in
edf
Package: velocity
Version: 1.4-5
Hello,
Does the velocity package need to Depend on ant ?
There are packages (such as zekr) that depend on velocity, just for
its /usr/share/java/velocity.jar. Yet since velocity *Depends* on ant,
which in turn Recommends default-jdk, hence to install a
Package: elmerfem
Version: 5.5.0.svn.4190.dfsg-3
Severity: minor
Please add a dh_desktop call to rules.
-Adam
--
GPG fingerprint: D54D 1AEE B11C CE9B A02B C5DD 526F 01E8 564E E4B6
Engineering consulting with open source tools
http://www.opennovation.com/
signature.asc
Description: This is a
Hi,
On Mittwoch, 10. Juni 2009, David Bruce wrote:
When I do a ./configure; make; sudo make install with the Debian
1.7.4 tuxtype tarball, the menus are translated appropriately.
I think the problem may be with installation of the tuxtype.mo files
when tuxtype gets installed by apt. With
Package: wnpp
Severity: wishlist
Owner: Stephane Glondu st...@glondu.net
* Package name: react
Version : 0.9.0
Upstream Author : Daniel C. Bünzli daniel.buen...@erratique.ch
* URL : http://erratique.ch/software/react
* License : BSD
Programming Lang: OCaml
On Fri, May 29, 2009 at 08:53:03PM +0200, Florian Vessaz wrote:
The following keys are not doing the appropriate action anymore:
- The key volume down decrease the volume and mute the audio.
- The key mute mutes and pops up the Power Information dialog of
gnome-power-manager.
Did either of
Package: mpi-defaults
Version: 0.4
Severity: wishlist
Please consider adding defaults for the lpia architecture even though Debian
does not use lpia, to help minimize the changes needed for Ubuntu and other
derivitives which do build on lpia. The changes are minor, lpia uses the same
defaults
Package: xkb-data
Version: 1.6-1
Severity: minor
Tags: l10n, patch
Hi,
I found an error in the German translation of xkb-data via the
gnome-keyboard-properties program:
With LANG=C choose Layouts and then Layout Options There is a
checkbox that lets you enable a Key sequence to kill the
Package: rhythmbox
Version: 0.12.1-1
Severity: normal
This is mysterious. In my fstab, I used to have:
/dev/disk/by-id/usb-Apple_iPod_[[blah]]-0:0-part2 /ipod vfat
rw,user,noauto 0 5
I'd plug my ipod in, type mount /ipod as my regular user, and there we
go.
rhythmbox
Package: libaio1
Version: 0.3.107-4
Severity: grave
Justification: renders package unusable
When upgrading from 0.3.107-3 to 0.3.107-4 the installation of
libaio.so.1 moved from /lib to /debian/tmp/lib. Applications that use
this library then reported that it could not be found. If this
Package: openoffice.org
Severity: normal
--- Please enter the report below this line. ---
Hello
I have selected double-sided printing by default for the printer I use
(KONICA MINOLTA C550 PS(P)) and when I want to print a 1 page document
in 2 copies, instead of printing the 2 copies in 2
Package: subversion
Version: 1.5.1dfsg1-2
Severity: wishlist
Please provide subversion 1.6 in testing release because the client and format
has been changed between 1.5 and 1.6 and this causes a lot of problems
with mixed newer clients accessing older repository.
-- System Information:
Debian
Package: bacula-console-qt
Version: 3.0.1-2
Severity: important
File: /usr/bin/bat
Hello,
starting bat I recieve this errors:
$ bat
mkdir: cannot create directory `/usr/bin/.libs': Permission denied
/usr/bin/bat: line 118: cd:
/build/buildd/bacula-3.0.1/debian/tmp-build-sqlite3/src/qt-console:
Package: icewm
Version: 1.2.37+1.3.4pre2-2
Severity: normal
Tested with dot-icewm1.tar from previous post.
Output: http://users.utu.fi/jikuja/icewm_1.2.37+1.3.4pre2-2.png
Doesn't draw button in my system.
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy:
Package: libtasn1-3-bin
Version: 2.2-1
Severity: minor
I want to keep the asn1Parser program on my system as I need it, but
`orphaner' always suggests to remove the package as it is in section
`libs' and nothing depends on it. If you agree, please reassign the bug
to ftp.debian.org as the
Package: lacheck
Version: 1.26-11.1
Severity: wishlist
lacheck doesn't give any warnings if you use \label before \caption
in a figure environment, and neither does LaTeX.
Consider this example:
\documentclass{article}
\begin{document}
\section{Section}
\begin{figure}
\label{fig:l1}
Package: rhythmbox
Version: 0.12.1-1
Severity: important
Trying to play some, but not all, files from my iPod produced strange
red icons in rhythmbox instead of any sound. Looking at the details
for one such track, I noticed it listed:
Filename: libgpod026388.mp3
Location: /media/JOHN
On Wed, 10 Jun 09 11:46, Christoph Burgmer wrote:
Package: python-kde4
Version: 4:4.2.4-1
Severity: grave
Justification: renders package unusable
After upgrading to python-qt4 4.5.1 any import of a PyKDE4 module makes
Python exit giving a memory access error (translated from German):
$
Yavor Doganov ya...@gnu.org writes:
Package: libtasn1-3-bin
Version: 2.2-1
Severity: minor
I want to keep the asn1Parser program on my system as I need it, but
`orphaner' always suggests to remove the package as it is in section
`libs' and nothing depends on it. If you agree, please
On Wed, Jun 10, 2009 at 06:16:36PM +0200, Simon Josefsson wrote:
Wouldn't the best solution be to change the section for this package?
That's what the bug is about, yes :-)
But changing the section in debian/control is not enough; the ftpmasters
have the ultimate power via the override files.
Package: listen
Version: 0.6.2-1
Severity: normal
When I try to drag tracks from the iPod to my main collection, I get a
+ cursor. It seems to succeed, but silently does absolutely nothing.
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500,
Package: grub2
Version: 1.96+20090317-1
Severity: normal
When installing grub2, one is first asked whether to chainload grub, afterwards
which arguments should be configured
for the linux kernel. In the last question, the text field only shows the first
argument, in my case
acpi_sleep=s3_bios,
Yavor Doganov ya...@gnu.org writes:
On Wed, Jun 10, 2009 at 06:16:36PM +0200, Simon Josefsson wrote:
Wouldn't the best solution be to change the section for this package?
That's what the bug is about, yes :-)
But changing the section in debian/control is not enough; the ftpmasters
have the
I see this problem too. For a more thorough description, consult:
#509843 (note that I no longer get these errors, but I suspect it is
still the F09/f09 issue)
similar bug in rhythmbox:
#492840
#532651
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of
On Wed, Jun 10, 2009 at 06:26:05PM +0200, Simon Josefsson wrote:
Yavor Doganov ya...@gnu.org writes:
But changing the section in debian/control is not enough; the ftpmasters
have the ultimate power via the override files.
If we change the section for the package, would the ftpmasters need
Package: ikiwiki
Version: 3.12
Severity: wishlist
Tags: patch l10n
Hello,
Please find attached the french debconf templates update, proofread by the
debian-l10n-french mailing list contributors.
Regards,
--
Philippe Batailler
# ikiwiki, French program tranlation.
# Copyright (C) 2007 Free
I've got shortname=mixed, and this doesn't help. From /proc/mounts:
/dev/sdd2 /media/JOHN\040GOERZE vfat
rw,nosuid,nodev,uid=1000,fmask=0022,dmask=0022,codepage=cp437,iocharset=utf8,shortname=mixed,utf8
0 0
I have folders named variously F44, f47, etc. and it appears to be a
case-sensitivity
Package: octave3.2
Version: 3.2.0-1
Severity: serious
There was an error while trying to autobuild your package:
Automatic build of octave3.2_3.2.0-1 on mayr by sbuild/mips 99.999
Build started at 20090607-1015
[...]
** Using build dependencies supplied by package:
Build-Depends: g++-4.1
Package: metacity
Version: 1:2.26.0-1
Severity: serious
There was an error while trying to autobuild your package:
Automatic build of metacity_1:2.26.0-1 on mayr by sbuild/mips 99.999
Build started at 20090609-1904
[...]
** Using build dependencies supplied by package:
Build-Depends: cdbs
Package: pinot
Version: 0.93-2
Severity: serious
There was an error while trying to autobuild your package:
Automatic build of pinot_0.93-2 on ball by sbuild/mips 99.99
Build started at 20090607-1829
[...]
** Using build dependencies supplied by package:
Build-Depends: autotools-dev,
Package: openoffice.org-kde
Followup-For: Bug #522090
I have a related problem:
I open a diectory with the fish:// protocol in Konqueror.
I click on a file to open it with OOo (which is not
running).
The splash screen appears and the progress bar indicates
progress. After a short time, the
Package: dolphin
Version: 4:4.2.2-1
Severity: wishlist
KIO-Slaves which operate over the network are prone to be slow. This
baddens dolphin's usability if you can't see whether it's working or
waiting for your input. So you should be able to see it, possible
using a throbbler like in
Hello,
I can confirm this with HP LaserJet 4100. I believe this to be caused by the
pdf2ps step. More info in bug 523269.
Regards,
--
Tomáš Janoušek, a.k.a. Liskni_si, http://work.lisk.in/
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe.
Hello,
I think that this is caused by the switch to using PDF as primary format for
printing -- CUPS converts the PostScript input to PDF and then back to
PostScript just to feed it to cups-pdf which then produces the final PDF. The
problem is the PDF-PostScript step, which is done by ps2pdf
Francesco Malvezzi francesco.malve...@unimore.it writes:
2009-06-10 11:57:55 ERROR Shibboleth.AttributeResolver [7]: exception
during SAML query to
https://omissis.unimore.it:8443/idp/profile/SAML1/SOAP/AttributeQuery:
CURLSOAPTransport failed while contacting SOAP responder:
Package: python-apt
Version: 0.7.10.3+b1
Severity: wishlist
The run method of DpkgInstallProgress class only works with one package.
Furthermore it sets the debfile and debname attribute which will be used by
the update_status method.
I would like to overwrite the run method in PackgeKit to
Package: freedroid
Version: 1.0.2+cvs040112-1.1
Severity: minor
Hi,
when winning the game, I'm not asked to enter my name -- so the best scores
are missing from the hiscore table.
Simon
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500,
geanydoc is now available in mentors.debian.net[1] and
git.debian.org[2].
[1] http://mentors.debian.net/debian/pool/main/g/geanydoc/
[2] git.debian.org/git/pkg-geany/packages/geanydoc.git
--
Regards,
Chow Loong Jin (GPG: 0x8F02A411)
Ubuntu Contributing Developer
signature.asc
Description: This
Hello,
I can confirm this with HP LaserJet 4100. I believe this to be caused by the
pdf2ps step. More info in bug 523269.
Regards,
--
Tomáš Janoušek, a.k.a. Liskni_si, http://work.lisk.in/
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe.
Package: aptitude
Version: 0.4.11.11-1
Severity: important
If I run aptitude it tries to start the curses interface then dies with:
Uncaught exception: ../../../src/cwidget/columnify.h:64:
cwidget::column::column(const cwidget::column_disposition, int, bool,
bool): Assertion _width=0 failed.
The
Package: lvm2
Version: 2.02.44-3
Severity: normal
otherwise LVM2 on multipath won't work for the non-rootfs on multipath
case when using insserv (similar to mdadm).
-- Guido
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500,
Hmm - that's strange. Are you using 1.8.3+debian-11? (that's what it
was diffed against). It applies cleanly for me, and when added to
debian/patches/00list it patches and builds fine with dpkg-buildpackage.
---
cat debian/patches/24_enhanced_mem.dpatch | patch -p1
patching file
Package: telepathy-mission-control
Version: 4.67-3
Severity: serious
From my pbuilder build log:
...
/usr/bin/make all-am
make[4]: Entering directory
`/tmp/buildd/telepathy-mission-control-4.67/libmcclient'
/bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I..
101 - 200 of 362 matches
Mail list logo
