On Wed, Nov 25, 2015 at 9:18 AM, Jochen Pawletta wrote:
> Hello
>
> I upgraded to debian jessie a while ago, but was still on kernel 3.2
> for some reasons (boot-problems).
>
> Now I finaly changed to kernel 3.16 and the problems starting ...
>
> Netatalk does not work with the
8c9979773a694e0b961c48153c21c19da11c58cf Mon Sep 17 00:00:00 2001
From: Brian Campbell lam...@continuation.org
Date: Tue, 25 Nov 2014 00:57:08 -0500
Subject: [PATCH] Add xhci-pci module to base modules list
xhci-pci has been split out into a separate module, and is necessary
for USB to work on certain
This ticket is filed upstream:
https://bugzilla.samba.org/show_bug.cgi?id=10669
The preferred solution from the Samba developers seems to be to use
libpam-winbind instead, though that doesn't necessarily work for all cases.
On Fri, Jul 18, 2014 at 2:58 PM, Matthew Gabeler-Lee
Package: partman-auto-raid
Version: 26
Severity: normal
Tags: d-i patch
If you try to run partman-auto-raid to set up an md device on a system that
has more than 10 md devices, it fails to assemble one of the devices with an
error that md10 already exists.
This has already been reported in the
On Tue, Apr 1, 2014 at 12:26 AM, Andrew Bartlett abart...@samba.org wrote:
If someone would like to try the attached patch and confirm I've not
broken anything (ie test all the auth/acct/password steps), that would
be most helpful.
Thanks,
Andrew Bartlett
I was running into this bug, and
This has now happened to me twice in the past week. Once I got booted
back to a console; once the screen completely locked up and I couldn't
even switch VTs. SSHing in revealed that GDM, X, et all had been
killed, but I couldn't seem to do anything to get the screen back
without a reboot.
If
Package: reprepro
Version: 4.13.1-1+b2
Severity: normal
I have a repository with two distributions and a pull defined between
them; I'll call them source and dest for the sake of argument.
This repository has a few components, including a ports component
for software we've ported from other
On Mon, Feb 10, 2014 at 6:39 AM, Jonas Smedegaard d...@jones.dk wrote:
forcemerge 685878 690227 710726 737700
retitle 685878 netatalk: newer upstream versions available
thanks
Quoting Brian Campbell (2014-02-05 05:41:09)
I'm interested in an updated version of Netatalk. At the moment
* Tweaks based on lintian complaints:
- Capitalization of Python in description
- Add Homepage
- Close ITP bug
- Add debian/watch
* Closes: #738156
-- Brian Campbell lam...@continuation.org Sat, 08 Feb 2014 03:24:38 -0500
klein (0.2.3-1) unstable; urgency=low
* source
Package: wnpp
Severity: wishlist
Owner: Brian Campbell brian.campb...@editshare.com
* Package name: python-klein
Version : 0.2.3
Upstream Author : David Reid dr...@dreid.org
* URL : https://github.com/twisted/klein
* License : MIT (Expat)
Programming Lang
Package: netatalk
Version: 2.2.5-1
Severity: wishlist
I'm interested in an updated version of Netatalk. At the moment,
Netatalk 2.2.5 fixes several bugs that I've encountered, and is
relatively easy to update to. There's one fairly significant feature
missing in Netatalk 3 that's missing and
Package: mutt
Version: 1.5.13-1
Severity: normal
Various options are changed from mutt's default values in the
/etc/Muttrc file supplied with the Debian package, for example
use_domain and use_from, but the manual only gives the mutt defaults.
This causes considerable confusion because mutt
On Fri, Aug 25, 2006 at 09:41:11PM +0100, I wrote:
On Thu, Aug 24, 2006 at 07:35:28PM -0700, Steve Langasek wrote:
On Thu, Aug 24, 2006 at 10:32:22AM +0200, E.G.Keizer wrote:
Starting lpd with ldap as the first entry for services, protocols and rpc
in nsswitch.conf caused lpd to crash
On Thu, Aug 24, 2006 at 07:35:28PM -0700, Steve Langasek wrote:
On Thu, Aug 24, 2006 at 10:32:22AM +0200, E.G.Keizer wrote:
Starting lpd with ldap as the first entry for services, protocols and rpc
in nsswitch.conf caused lpd to crash with a SIGPIPE.
That's not good, but it's not data
On Sat, Aug 12, 2006 at 03:13:27PM +, Joachim Breitner wrote:
Please keep [EMAIL PROTECTED] in the CC.
Weitergeleitete Nachricht
Von: Fabrice Flore-Thebault [EMAIL PROTECTED]
Antwort an: Fabrice Flore-Thebault [EMAIL PROTECTED],
[EMAIL PROTECTED]
[...]
It's
Package: pflogsumm
Version: 1.1.0-3
Severity: wishlist
Hi,
When using postfix with postgrey, pflogsumm separates out all of the
RCPT reject lines with different amounts of time, for example:
Recipient address rejected: Greylisted for 100 seconds (see http (total: 1)
1 [EMAIL
Package: pflogsumm
Version: 1.1.0-3
Severity: wishlist
Hi,
Reading about every blacklisted host that's tried to send us spam
recently isn't much fun, so limiting it to the top offenders is useful.
The attached patch adds a new option --top_reject=cnt which limits the
number of addresses shown in
tags 310491 + patch
thanks
The attached patch adds the docs for me.
Cheers,
Brian
diff -ru ocaml-expat-0.9.1/debian/docs ocaml-expat-0.9.1.doc/debian/docs
--- ocaml-expat-0.9.1/debian/docs 2005-07-30 11:58:19.0 +0100
+++ ocaml-expat-0.9.1.doc/debian/docs 2005-07-30
Hello,
I've encountered this bug with the 1.21-1 backport to woody. Somewhere
along the way the cleaning up line gets an extra space at the end and
so fails to match the regex.
Note that you won't see this with versions of logcheck from 1.2.17 on,
because they strip whitespace from the end
Package: libexpat-ocaml-dev
Version: 0.9.1-2
Severity: normal
The ocaml-expat library can generate HTML API documentation using make
doc, which the README file refers to. Unfortunately it isn't included
in the Debian packages. Could you add it, please?
Thanks,
Brian Campbell
-- System
?
--
Brian Campbell
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: holotz-castle
Version: 1.3.4-2
Severity: important
holotz-castle crashes on powerpc after selecting new game or continue
game from the menu. The console output is
Couldn't find the theme theme/default233?
Error loading the theme default233?
.
On Sun, Jan 23, 2005 at 09:13:11PM +, I wrote:
The problem stems from the use of an alternate signal stack (see
erts/emulator/hipe/hipe_x86_signal.c for details) interacting badly with
Linuxthreads. If you look at the straces, you'll see the SIGSEGV comes
immediately after SIGCHLD --
I've taken a look into these problems.
Short version: Disable HiPE (--disable-hipe) or use Linux 2.6 if you
need to get Erlang 10 working properly on x86 as a matter of urgency.
Note that erlang 9 has similar problems, but they don't seem to occur
during startup.
The problem stems from the use
24 matches
Mail list logo