The NanoPi Neo Plus2 is struck by the same error.
I just sent out a patch:
arm64: dts: allwinner: H5: NanoPi Neo Plus2: phy-mode rgmii-id
https://lore.kernel.org/linux-arm-kernel/20201129194512.1475586-1-xypron.g...@gmx.de/T/#u
Package: src:linux
X-Debbugs-Cc: xypron.g...@gmx.de
Version: 5.9.9-1
Severity: normal
Tags: patch upstream
Dear Maintainer,
since Bullseye switched to Linux v5.9 my Pine A64 LTS board fails to
boot via iSCSI.
I have posted a patch upstream. Please, consider it for inclusion:
[PATCH 1/1] arm64:
Am 27. November 2020 04:18:06 MEZ schrieb Elliott Mitchell
:
>The patch to have GRUB load a device-tree is interesting. This is
>certainly worthy of discussion.
>
>Three issues come up when looking though:
>
>First, your patch modifies /etc/grub.d/10_linux, but misses
>/etc/grub.d/10_linux_xen.
I was not able to reproduce the problem with
libreoffice-impress (1:7.0.3-4).
Best regards
Heinrich
Package: glusterfs-common
Version: 8.2-1
Severity: normal
Dear maintainer,
updating Python3 leads to the following warning:
running python rtupdate hooks for python3.8...
/usr/lib/x86_64-linux-gnu/glusterfs/python/syncdaemon/syncdutils.py:728:
SyntaxWarning: "is" with a literal. Did you mean "==
On 08.11.20 10:20, Rene Engelhard wrote:
> Hi,
>
> Am 07.11.20 um 19:11 schrieb Rene Engelhard:
>> Am 07.11.20 um 10:12 schrieb Heinrich Schuchardt:
>>> Everytime I leave the LibreOffice Impress presentation mode by pressing
>>> the ESC key the application cra
The error does not occur with the LibreOffice 7.0 daily build:
https://dev-builds.libreoffice.org/daily/libreoffice-7-0/Linux-rpm_deb-x86_64@86-TDF/2020-11-06_03.36.20/libreoffice-7-0~2020-11-06_03.36.20_LibreOfficeDev_7.0.4.0.0_Linux_x86-64_deb.tar.gz
So, please, upgrade the package.
Best regar
Upstream bug report
https://bugs.documentfoundation.org/show_bug.cgi?id=138048
Package: libreoffice-impress
Version: 1:7.0.3-3
Severity: important
Dear maintainer,
Everytime I leave the LibreOffice Impress presentation mode by pressing
the ESC key the application crashes:
$ SAL_SYNCHRONIZE=1 loffice UEFI_Firmware_Testing.odp
X-Error: BadDrawable (invalid Pixmap or Window p
sheet with:
A1: 1970-01-01
A2: 2000-01-08
A3: =A2-A1
A4: =A3/86400
When I change the value of A2 the cell A3 is updated.
But A4 is NOT updated.
Only after pressing F9 A4 is recalculated.
LibreOffice should recalculate all cells.
Best regards
Heinrich Schuchardt
-- Package-specific info
boot service FreePool() was called with
an address that was not allocated by EDK II. On possible reason for such
a failure would be calling FreePool() twice for the same address.
Best regards
Heinrich Schuchardt
On 15.10.20 15:13, Andre Heider wrote:
> On 04/09/2020 07:20, Andre Heider wrote:
>
>
>
>> Of those, these are part of all.db:
>> rockchip/rk3399-evb.dts
>> apm/apm-mustang.dtb
>>
>> The former is an evaluation board, added by Heinrich (cc'ed) in
>> https://bugs.debian.org/cgi-bin/bugreport.cgi?bu
On 04.09.20 09:54, Andre Heider wrote:
> On 04/09/2020 09:20, Heinrich Schuchardt wrote:
>> On 04.09.20 07:20, Andre Heider wrote:
>>> On 04/09/2020 03:10, Vagrant Cascadian wrote:
>>>> On 2020-08-28, Andre Heider wrote:
>>>>> Stats:
>>>&
On 04.09.20 07:20, Andre Heider wrote:
> On 04/09/2020 03:10, Vagrant Cascadian wrote:
>> On 2020-08-28, Andre Heider wrote:
>>> Stats:
>>> Going by u-boot upstream, only 17 of +700 boards set $console (grep for
You seem
>>> CONFIG_DEFAULT_CONSOLE, which too is deprecated).
I found no CONFIG_DEF
Today firmware-realtek (20200421-1) was made available for Bullseye but
the file
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/rtl_nic/rtl8125a-3.fw
is still missing.
Why does the maintainer not simply include all files from rtl_nic/ into
the package?
Best reg
Package: grub-common
Version: 2.04-8
Severity: minor
Dear Maintainer,
/etc/grub.d/05_debian_theme executes
/usr/share/desktop-base/grub_background.sh
/usr/share/desktop-base/grub_background.sh sets:
WALLPAPER=/usr/share/images/desktop-base/desktop-grub.png
Now 05_debian_theme calls
Package: sbsigntool
Version: 0.9.2-2
Severity: minor
Dear Maintainer,
on https://packages.debian.org/sid/sbsigntool, please, report the
upstream git repository as
https://git.kernel.org/pub/scm/linux/kernel/git/jejb/sbsigntools.git
Current upstream version is 0.9.4. Our version dates from J
On 6/10/20 4:09 PM, Steve McIntyre wrote:
But I assume you must have a /dev/sda device file. I see similar
locally on my laptop, where /dev/sda is a SATA drive and /dev/sdb is
an SD reader with nothing inserted:
# ls -al /dev/sd?
brw-rw 1 root disk 8, 0 Jun 10 06:25 /dev/sda
brw-rw 1
Package: grub-efi-amd64
Version: 2.04-7
Severity: minor
Dear Maintainer,
update grub-efi creates messages:
Removing linux-image-5.4.0-4-amd64 (5.4.19-1) ...
/etc/kernel/postrm.d/initramfs-tools:
update-initramfs: Deleting /boot/initrd.img-5.4.0-4-amd64
/etc/kernel/postrm.d/zz-update-grub:
Gener
tarts.
/etc/network/interfaces.d/eth0:
»»»
auto eth0
iface eth0 inet static
address 192.168.0.8
netmask 255.255.255.0
gateway 192.168.0.1
auto eth0:1
iface eth0:1 inet dhcp
«««««««
Best regards
Heinrich Schuchardt
-- Package-specific info:
--- /etc/network/interfa
On 5/3/20 5:45 PM, Heinrich Schuchardt wrote:
On 5/3/20 10:58 AM, Carsten Schoenert wrote:
I can't reproduce this behavior within a Gnome3 session, no matter what
I try. Currently I'm using wayland.
This let me assume this is then mainly a issue within the KDE desktop
enviro
On 5/3/20 10:58 AM, Carsten Schoenert wrote:
I can't reproduce this behavior within a Gnome3 session, no matter what
I try. Currently I'm using wayland.
This let me assume this is then mainly a issue within the KDE desktop
environment, not Thunderbird. For sure this needs more proofing by
check
I retried with with "Force DPI" = 96 dpi and without force dpi. In all
cases the pop-up does not fit onto the screen.
Best regards
Heinrich Schuchardt
the left or right side of the screen no button on the top of
the window is visible.
The layout should observe the DPI setting.
Best regards
Heinrich Schuchardt
-- System Information:
Debian Release: bullseye/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x
EY
#define DEFAULT_WIFI_SUBMIT_URL
"https://location.services.mozilla.com/v1/submit?key="; MOZILLA_API_KEY
Best regards
Heinrich Schuchardt
On 4/20/20 7:10 PM, Vagrant Cascadian wrote:
> Control: tags 877232 moreinfo
>
> On 2017-09-29, Heinrich Schuchardt wrote:
>> On 09/29/2017 09:26 PM, Vagrant Cascadian wrote:
>>> On 2017-09-29, Heinrich Schuchardt wrote:
>>>> usr/share/doc/u-boot-rockchip/README
Closes: #955374
Signed-off-by: Heinrich Schuchardt
---
v2:
the file name must on .dtb not .dts
---
db/all.db | 7 +++
1 file changed, 7 insertions(+)
diff --git a/db/all.db b/db/all.db
index 604b8e8..0d4b6f0 100644
--- a/db/all.db
+++ b/db/all.db
@@ -434,6 +434,13 @@ DTB-Id
Closes: #955374
Signed-off-by: Heinrich Schuchardt
---
db/all.db | 7 +++
1 file changed, 7 insertions(+)
diff --git a/db/all.db b/db/all.db
index 604b8e8..0d4b6f0 100644
--- a/db/all.db
+++ b/db/all.db
@@ -434,6 +434,13 @@ DTB-Id: allwinner/sun50i-h5-nanopi-neo2.dtb
U-Boot-Script-Name
Package: flash-kernel
Version: 3.100
Severity: wishlist
Please, add FriendlyARM NanoPi NEO Plus2 to flash-kernel
Best regards
Heinrich Schuchardt
This line in .config/GIMP/2.10/gimprc fixes the problem:
(theme "System")
Please, update the package accordingly.
Best regards
Heinrich
The problem only occurs with the pre-selected 'Dark' color scheme.
I tried to pre-select the 'System' color scheme in file
/etc/gimp/2.0/gimprc (after deleting my personnel gimprc) but this
setting was not taken into account.
I assume file /usr/share/gimp/2.0/themes/Dark/gtkrc has to be changed
Package: gimp
Version: 2.10.12-1
Severity: important
Dear Maintainer,
File dialogues in GIMP use black foreground and background color.
So filenames cannot be read.
I am using KDE.
Best regards
Heinrich
-- System Information:
Debian Release: bullseye/sid
APT prefers testing
APT policy: (
Package: firefox-esr
Version: 68.4.1esr-1
Severity: critical
Dear maintainer:
Firefox cannot be started due to an illegal instruction:
$ firefox-esr -safe-mode
illegal instruction
valgrind /usr/bin/firefox-essr -safe-mode
...
==2805==
==2805== Invalid free() / delete / delete[] / realloc()
=
Package: src:linux
Version: 5.4.13-1
Severity: important
Dear Maintainer,
with kernel linux-image-5.4.0-3-arm64 the Marvell 8040 MACCHIATOBin
Double-shot fails to boot. There is no problem to boot with
linux-image-5.3.0-3-arm64.
Kernel linux-image-5.4.0-3-arm64 boots when using the 5.3.0-3-arm64
BCMGENET=m
Cf. drivers/net/ethernet/broadcom/genet/bcmgenet.c
Best regards
Heinrich Schuchardt
This driver for the RTL8125 2.5GbE Controller is in Debian kernel
linux-image-5.4.0-trunk-amd64
Best regards
Heinrich
Package: firmware-realtek
Version: 20190717-2
Severity: normal
Tags: upstream
Dear maintainer,
file rtl8125a-3.fw required for the Realtek 8125 is missing in the
package. Kindly update the package from
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/rtl_nic/
Be
Package: sddm
Version: 0.18.0-1
Severity: normal
Dear Maintainer,
I am running sddm with sddm-theme-breeze. When the system is idle
command top
shows:
PID USER %CPU %MEM TIME+ COMMAND
785 sddm 25.5 12.7 24:06.48 llvmpipe-0
786 sddm 25.5 12.7 24:05.31 llvmpipe-1
788 sddm 25.5 12
On 12/15/19 10:26 AM, Rene Engelhard wrote:
reasign 946708 libreoffice-gtk2
found 946708 1:6.3.3-3
retitle 946708 libreoffice-impress: bullet dialogue: ok does not accept click
with gtk2
thanks
On Sat, Dec 14, 2019 at 09:56:32AM +0100, Heinrich Schuchardt wrote:
in libreoffice impress the
Upstream bug report:
https://bugs.documentfoundation.org/show_bug.cgi?id=129401
OK button disabled in bullets and numbering dialogue when selecting "None"
Package: libreoffice-impress
Version: 1:6.3.3-3
Severity: normal
Dear Maintainer,
in libreoffice impress the "Bullets and Numbering" dialogue allows to
select a bullet format. On of the available formats is "None".
If "None" is selected the OK button reacts neither to a mouse click not
to ALT+O.
ble for it nor did it add an entry to grub.conf.
I do not expect GRUB to ever touch my UEFI variables without my explicit
consent. Please, provide a dialogue.
Bug report 913916 seems to be related but I am not sure if it is
reporting the same issue.
Best regards
Heinrich Schuchardt
-- Packag
The discussion lead to the following merged upstream patches:
[1] - https://patchwork.ozlabs.org/patch/1173314/
[2] - https://patchwork.ozlabs.org/patch/1173316/
Best regards
Heinrich
The problem seems to stem from missing accessibility of /dev/tty:
$ ls /dev/tty -la
crw--w 1 root tty 5, 0 Oct 6 06:19 /dev/tty
not help if I am working via SSH.
How can I simply enter the password on the console?
Best regards
Heinrich Schuchardt
-- System Information:
Debian Release: bullseye/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 5.2.0-3-amd64 (S
plasma-workspace 4:5.14.5.1-3 (available with Sid) has the same problems.
Best regards
Heinrich Schuchardt
This is to confirm that the problem is reproducible on Bullseye x86_64.
The bug appeared on two of my computers after upgrading.
As Soenke described downgrading to the Buster package fixes it.
Best regards
Heinrich Schuchardt
The root of the problem is that the Debian installer does not install
package cryptsetup-initramfs.
I retried with the guided partioning. Same result.
The generated initramfs does not contain dm-crypt.ko.
Package: debian-installer
Version: 2019-09-23
Severity: important
Dear Maintainer,
I installed from debian-testing-amd64-netinst.iso (bullseye) dated
2019-09-23 on my NVME drive
partition 1: efi
partition 2: boot
partition 3: encrypted volume
On encrypted volume: logical volume group LVM1
volum
$kernel_addr_r efi/debian/grubaa64.efi
bootefi $kernel_addr_r $fdt_addr_r
So I suggest to close this issue.
Best regards
Heinrich Schuchardt
Package: src:linux
Version: 5.2.9-2
Severity: normal
Dear Maintainer,
with the 32bit kernel I do not have a serial console on my RPi 3B+.
The serial console works fine with the 64bit kernel.
Please, add the missing configuration items to enable the console:
SERIAL_8250_EXTENDED=y
SERIAL_8250_S
the input and output device. So please, change
the lines to:
# Uncomment to disable graphical terminal
#GRUB_TERMINAL=console
Best regards
Heinrich Schuchardt
Package: u-boot-imx
Version: 2019.01+dfsg-7
Severity: normal
Tags: patch
Dear Vagrant,
booting via GRUB fails on the Wandboard. The problem stems from caches
with incorrect content.
A patch is available at
efi_loader: re-enable GRUB workaround on 32bit ARM
https://patchwork.ozlabs.org/patch/113
Package: kwalletmanager
Version: 4:18.04.1-1
Severity: normal
Dear Maintainer,
when trying to open a wallet I get an error
Error when attempting to decrypt the wallet Password using GPG.
If you're using a SmartCard, please ensure it's inserted then try again.
GPG error was Inappropriate ioctl f
Package: plasma-desktop
Version: 4:5.14.5.1-1
Severity: normal
In different applications like kate and konsole single pixel lines of
windows behind the application shine through.
I have observed this both for Nvidia (GT710) and for AMD graphics cards,
both with Debian kernel and with a vanilla 5
Package: flash-kernel
Version: 3.98
Severity: normal
Tags: patch
The model property in armada-8040-mcbin.dtb has been changed to
'Marvell 8040 MACCHIATOBin Double-shot' in Linux kernel 5.0.
A new board 'Marvell 8040 MACCHIATOBin Single-shot' has been added.
Signed-off-by:
Package: grub-efi-arm64
Version: 2.02+dfsg1-18
Severity: normal
I use U-Boot v2018.07-rc1 on a MACCHIATObin.
The UEFI shell reports these block devices and partitions:
FS4: Alias(s):HD0b:;BLK7:
/VenHw(e61d73b9-..)/SD(1)/SD(2)/HD(1,MBR,0x477bc392,0x2000,0x20)
FS5: Alias(s):HD0c:;BLK8:
/VenHw(
The U-Boot version that does not support network on the MACCHIATObin is
v2018.11.
U-Boot v2019.04 supports network and GRUB reaches the rescue console.
But I still think GRUB should not fail if networking is not available.
Best regards
Heinrich Schuchardt
busy timeout
Error: SMI busy timeout
Error: SMI busy timeout
Error: SMI busy timeout
Error: SMI busy timeout
Could not get PHY for ethernet@0: addr 0
cannot connect to phy
Best regards
Heinrich Schuchardt
."
Please, add the patch to our Debian package.
Best regards
Heinrich Schuchardt
From 2d2a4549cc29850aab891495685a7b31f5254b12 Mon Sep 17 00:00:00 2001
From: Alexander Graf
Date: Mon, 21 Jan 2019 10:23:11 +
Subject: [PATCH] target/arm: Allow Aarch32 exception return to switch from
Mon-&g
atic patch without the patch Qcom
ARM notebooks did not work. So we better do not revert it for aarch64
until a final solution is found.
The upstream report is here:
http://lists.gnu.org/archive/html/grub-devel/2019-04/msg00075.html
Best regards
Heinrich Schuchardt
Package: git-email
Version: 1:2.20.1-2
Severity: normal
The value of the sendmail.transferencoding configuration item is ignored.
A patch has been submitted as
https://marc.info/?l=git&m=155483810827726&w=2
The patch is also appended.
Best regards
Heinrich Schucha
Package: flash-kernel
Version: 3.97
Severity: wishlist
Tags: patch
The Pine A64 LTS is supported in Linux upstream since v4.20 and the
relevant device tree is contained in package linux-image-4.20.0-trunk-arm64
(4.20-1~exp1).
Signed-off-by: Heinrich Schuchardt
---
db/all.db | 7 +++
1 file
trees.
It would be preferable to have all installation files on a single medium.
Best regards
Heinrich Schuchardt
n the installer saying:
"GRUB could not be registered in the boot manager."
Best regards
Heinrich Schuchardt
,nofail,noatime,nodiratime 0 2
tmpfs /tmp tmpfs nosuid 0 0
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
Please, change the installer scripts such that iSCSI partitions
automatically receive the _netdev attribute in /etc/fstab.
Best regards
Heinrich Schuchardt
Package: thunderbird
Version: 1:60.5.0-3
Severity: normal
When editing a contact clicking the 'OK' button of the 'New contact'
form has no
effect. In earlier releases this led to storing the contact.
The same problem occurs when editing an existing contact.
Best regards
On 2/9/19 10:01 AM, Colin Watson wrote:
> On Sun, Jan 20, 2019 at 11:41:40PM +0100, Heinrich Schuchardt wrote:
>> I am using secure boot.
>>
>> When I open the grub command line and enter 'ls' I get an error message
>> like 'Secure boot does not all
sign the modules appropriately.
Best regards
Heinrich Schuchardt
Package: shim
Version: 0.9+1474479173.6c180c6-1
Severity: important
Dear Maintainer,
mmx64.efi.signed is used to install new public keys for secure boot this
includes the Debian public testing key
https://salsa.debian.org/kernel-team/linux/raw/debian/4.19.9-1/debian/certs/test-signing-certs.pem
> On Sat, Jan 12, 2019 at 02:11:25PM +0100, Vincent Lefevre wrote:
> I'm not at all sure that I agree. The configuration in question exists
> in order to tell the postinst which devices it should run grub-install
> on. If the device does not exist, it obviously isn't possible to run
> grub-instal
dcff8)<<< 503 Bad sequence of commands
Net::SMTP::_SSL=GLOB(0x560c092dcff8)>>> HELO workstation.router.box
Net::SMTP::_SSL=GLOB(0x560c092dcff8)<<< 503 Bad sequence of commands
Best regards
Heinrich Schuchardt
-- System Information:
Debian Release: buster/sid
APT
Package: docker.io
Version: 18.06.1+dfsg1-2
Severity: important
Dear Maintainer,
running docker leads to gigabytes of logs written per *minute* with all
messages being the same:
Jan 7 14:49:15 localhost dockerd[391]:
time="2019-01-07T14:49:13.726551740+01:00"
level=error msg="failed to get even
On 12/19/18 1:19 PM, Leif Lindholm wrote:
> On Wed, Dec 19, 2018 at 12:15:02AM +0100, Heinrich Schuchardt wrote:
>> I have reinstalled grub-efi-arm 2.02+dfsg1-9.
>>
>> With my current U-Boot and a custom built the 4.18.20 kernel I am able
>> to boot.
>>
>>
I have reinstalled grub-efi-arm 2.02+dfsg1-9.
With my current U-Boot and a custom built the 4.18.20 kernel I am able
to boot.
The stock Debian kernel does not boot.
What it takes is a U-Boot v2018.11 with these additional patches:
* Revert "efi_loader: remove efi_exit_caches()"
* efi_loader:
I now tried tested different version:
./grub2-common_2.02+dfsg1-6kali1_armhf.deb
./grub-efi-arm_2.02+dfsg1-6kali1_armhf.deb
./grub-common_2.02+dfsg1-6kali1_armhf.deb
./grub-efi-arm-bin_2.02+dfsg1-6kali1_armhf.deb
work fine.
./grub-common_2.02+dfsg1-8kali1_armhf.deb
./grub-efi-arm-bin_2.02+dfsg1-
dr_r} dtb
load mmc 1:1 ${kernel_addr_r} EFI/debian/grubarm.efi
bootefi ${kernel_addr_r} ${fdt_addr_r}
Package flash-kernel is used for up
Package versions:
flash-kernel 3.96
linux-image-armmp-lpae 4.18+100
linux-image-4.18.0-3-armmp-lpae
U-Boot tinker-rk3288_defconfig v2018.09
Best regards
Heinrich Schuchardt
Package: vim-pathogen
Version: 2.4-1
Severity: normal
Dear Maintainer,
vim-pathogen requires vim to be compiled with Python support. Currently
this package has vim as dependency. But 'apt-get install vim' installs
a basic version of vim without Python support.
So we need a dependency like
vim-g
cf.
https://sourceforge.net/p/sispmctl/git/ci/478edd46e39548e038e1ec4da9dd2cf317e6ba7e/
Dear maintainer
version 4.1 sispmctl has been released today. It solves the following
issues:
- Add support for Gembird EG-PMS2 with idVendor=04b4, idProduct=fd15.
- Provide a systemd service definiton
- Provide a udev rule set so non-root users can use sispmctl
Best regards
Heinrich
fancy entering complete timestamps with time
zone information.
Best regards
Heinrich Schuchardt
The issue is resolved in the current upstream source available at
https://github.com/skx/asql
Please, re-package.
Best regards
Heinrich
erlays the dtb files must be
built with the environment variable DTC_FLAGS='-@'. This flag adds a
__symbols__ section to the dtb file.
Unfortunately the flag '-@' is not set for packages linux-image-arm64
and linux-image-armhf.
Pleae, adjust the build rules.
Best regards
Heinrich Schuchardt
grub-efi-arm from U-Boot will afterwards require an updated GRUB
version which will take GRUB patch d0c070179d4d ("arm/efi: Switch to
arm64 linux loader", 2018-07-09) and others into account.
Best regards
Heinrich Schuchardt
The issue was resolved with libqt5network5_5.11.1+dfsg-8_amd64.deb
Package: qtbase-opensource-src
Version: 5.11.1+dfsg-7
Severity: normal
My Debian Buster installation of the Quassel client (version 0.12.5)
fails to connect with the message "Error while setting the maximum
protocol version". I verified with Wireshark that my Linux client is
actually communicating
On 09/08/2018 07:26 PM, Matthias Klumpp wrote:
> Am Sa., 8. Sep. 2018 um 19:15 Uhr schrieb Heinrich Schuchardt
> :
>>
>> Package: apt-config-icons
>> Version: 1.6.4
>> Severity: normal
>>
>> When updating my system with 'apt-get update' the lar
Package: apt-config-icons
Version: 1.6.4
Severity: normal
When updating my system with 'apt-get update' the largest part of the
data volume (> 80%) is for icons:
Get:35 http://ftp.de.debian.org/debian buster/main DEP-11 48x48 Icons
[3,592 kB]
Get:36 http://ftp.de.debian.org/debian buster/main DEP
package highlight. The blob was not displayed by the
browser.
Please, add highlight to the list of dependencies of gitweb.
Best regards
Heinrich Schuchardt
-- System Information:
Debian Release: 9.5
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable
Having systemd installed does not imply that the system is connected to
a network at regular time intervals. So solely relying on NTP is not a
good decision.
The systemd scripts at
https://github.com/mattwire/upspico/tree/master/systemd
solve the problem for me.
Why shouldn't we do the same (a on
Package: sddm-theme-breeze
Version: 4:5.13.2-1
Severity: normal
Dear Maintainer,
the control for the sddm-theme-breeze allows to specify a background image.
I specified an image. But it is ignored when the system is restarted.
Best regards
Heinrich Schuchardt
-- System Information:
Debian
logout before shutdown. So it seems unclear what makes the difference.
Below you will find that reportbug tried to read /etc/iscsi/iscsid.conf.
As this file contains passwords it is only accessible to root. Do you
need any information out of it for the analysis?
Best regards
Heinrich Schuchardt
The patch has been accepted by the upstream maintainer.
https://lkml.org/lkml/2018/6/14/365
Forwarded Message
applied for 4.19.
I've amended your commit message with the info from your reply about
the vendor kernel using the same value and added an appropriate Fixes
tag to po
CONFIG_ROCKCHIP_DW_MIPI_DSI
CONFIG_ROCKCHIP_EFUSE
CONFIG_ROCKCHIP_IOMMU
CONFIG_ROCKCHIP_SARADC
CONFIG_ROCKCHIP_THERMAL
The corresponding drivers are selected by the device tree.
Best regards
Heinrich Schuchardt
sufficient to enable booting.
Signed-off-by: Heinrich Schuchardt
---
arch/arm64/boot/dts/rockchip/rk3399-firefly.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index
Package: davfs2
Version: 1.5.4-3
Severity: normal
Dear Maintainer,
my /tmp partitionis noexec due to security reasons.
When upgrading davfs2 I saw the following error:
Can't exec "/tmp/davfs2.config.TwSilm": Permission denied at
/usr/share/perl/5.26/IPC/Open3.pm line 178.
open2: exec of /tmp/d
I will try to build those 60 images and analyze which conform to your requirements. But that will take some time.
Best regards
Heinrich
On 05/20/2018 09:15 PM, Karsten Merker wrote:
> On Sat, May 19, 2018 at 02:57:41PM +0200, Heinrich Schuchardt wrote:
>
>> Package: flash-kernel
>> Version: 3.94
>> Severity: normal
>> Tags: patch
>>
>> Add 60 missing database entries for arm64 board
: Heinrich Schuchardt
---
db/all.db | 420 ++
1 file changed, 420 insertions(+)
diff --git a/db/all.db b/db/all.db
index 5c1c85d..f5e507a 100644
--- a/db/all.db
+++ b/db/all.db
@@ -42,6 +42,13 @@ DTB-Id: sun8i-r16-parrot.dtb
U-Boot-Script-Name
101 - 200 of 412 matches
Mail list logo
