Package: android-sdk-platform-tools-common
Version: 28.0.2+9
Severity: normal
Dear Maintainer,
CUPS printing to my USB attached printer stopped working
(with error message "cannot send data to the printer").
After some debug I found the issue is caused by wrong
ownership of the device node, it
Package: mc
Version: 3:4.8.26-1
Severity: normal
Tags: patch
Dear Maintainer,
viewing rar archives worked in the past but stopped at some point,
the reason is that unrar-nonfree has been upgraded from 5.9.4-1
to 6.0.3-1 (and now 6.0.4-1). This is not handled by the extfs/urar
script but can be
Package: mc
Version: 3:4.8.26-1
Severity: normal
Dear Maintainer,
since the last mc update I cannot view zip files containing
pdf files anymore, this seems to be related to mc's use of
"file -z". I confirmed this happens when the ~/.config/mc/mc.ext
is removed and thus /etc/mc/mc.ext is used.
$
Hi Sudip,
On Fri, Feb 19, 2021 at 03:59:35PM +, Sudip Mukherjee wrote:
> On Mon, Feb 1, 2021 at 10:57 PM Sudip Mukherjee
> wrote:
> >
> > Control: forwarded -1 https://github.com/OfflineIMAP/offlineimap3/issues/43
>
> Will it be possible to test the change at
>
Package: offlineimap3
Version: 0.0~git20210105.00d395b+dfsg-2
Severity: important
Dear Maintainer,
I sent a message composed in mutt, afterwards offlineimap3 crashed
while trying to upload the sent message to IMAP server
with message "UnicodeDecodeError: 'utf-8' codec can't
decode byte 0xfc in
Dear Maintainer,
> The status so far is that we have a patch that solves the problem by
> re-enabling [tracing][1], but the reason that tracing was disabled in the
> first place is because it depends on minified javascript.
Personally I always regretted that Debian chose to remove the
trace
I now reported it upstream:
https://bugs.ghostscript.com/show_bug.cgi?id=701949
Johannes
Now confirmed (by printing the CUPS test page) that the bug
is still present in 9.50~dfsg-2, and that the workaround
patch still applies and still works.
Johannes
ghostscript_9.50~dfsg-2 packages have been uploaded, with this bug
probably still unfixed and unknown to upstream. I was not able to actually
test my printer with 9.50 yet, but changes in upstream git don't seem to
address this bug, and it's not in upstream butracker.
Question to the package
Package: ghostscript
Version: 9.28~~rc4~dfsg-1
Severity: important
Tags: upstream
Dear Maintainer,
my Samsung ML-2250 printer stopped to work, it outputs a page with
this error message:
PCL6 ERROR - sb_count != -128
POSITION : 0xbc8 (3016)
SYSTEM : XLPGP/xl_pattern
LINE :
On Thu, Aug 01, 2019 at 10:28:26PM +0200, Romain Francoise wrote:
> A patch for this is now available in the upstream bug tracker
> (https://github.com/tmux/tmux/issues/1861) and I have tested it
> successfully using the Mutt recipe from #933572.
The issue is not fixed for me with mutt in tmux
Package: libpam0g
Version: 1.3.1-2
Severity: critical
Justification: causes serious data loss
Dear Maintainer,
my X session was just killed during update, I could capture the
output because aptitude was running inside tmux:
Unpacking libpam0g:amd64 (1.3.1-2) over (1.1.8-4) ...
Setting up
Package: qpdfview
Version: 0.4.14-1
Severity: normal
Dear Maintainer,
I have a few pdf files with filenames which are probably using some
Chinese encoding which is invalid when trying to interpret as UTF-8.
qpdfview can't open them, neither when passing the name on the
commandline nor when
Package: libwine
Version: 1.8.1-1
Followup-For: Bug #813381
Dear Maintainer,
I just ran into the same issue, and after some
experiments found it is caused by a missing libfontconfig1.
libfontconfig1:i386 is only in Recommends of libwine:i386,
but it should be in Depends.
Same for
Hi,
On Sat, Apr 18, 2015 at 05:20:44PM +0200, Volker Mische wrote:
Hi Ron,
I've read this bug report several times and it took my a while to understand
what the actual problem is. Do I summarize correctly that the problem is a
system wide installed CGI script that can serve up the gtags
I'm also seeing the Hash Sum mismatch often since about a week ago,
maybe since [UPGRADE] apt:amd64 0.9.16 - 0.9.16.1 (sid) but I did not
downgrade to confirm. However, it seems the issue is caused
by xz decompressor truncating the files. For example:
# ls -l /var/lib/apt/lists/partial/
On Sun, Jan 12, 2014 at 06:02:38PM +, Ben Hutchings wrote:
On Mon, 2014-01-13 at 01:40 +0800, jida...@jidanni.org wrote:
Move the bad one out of the way please soon, else Debian users will get
their disks messed up!
You still haven't tested any proposed fixes, so don't you dare tell
On Tue, Jan 07, 2014 at 02:40:39AM +, Ben Hutchings wrote:
On Tue, 2014-01-07 at 07:01 +0800, jida...@jidanni.org wrote:
Don't worry, I'll trust you! Plus I'm 53.
I don't think anyone else has reproduced this problem, so you are the
person in the best place to check that these changes
On Wed, Jul 10, 2013 at 12:08:11AM +0100, Brian Potkin wrote:
On Tue 09 Jul 2013 at 20:43:09 +0100, Brian Potkin wrote:
snapshot.debian.org has the previous versions of libqpdf10 and qpdf. So
I installed them (i386). Printing now takes place. Whether the bug lies
with one of those
Package: cups-filters
Version: 1.0.34-3
Severity: grave
Justification: renders package unusable
Dear Maintainer,
usually I'm using Kyocera FS-1020D Foomatic/hpijs-pcl5e via socket://,
but the bug is reproducible with CUPS-PDF Printer both when
trying to print PDFs and using Print Test Page from
Hi,
I rebuilt the cups-filter package locally and installed these:
cups-filters_1.0.34-3_amd64.deb
libcupsfilters1_1.0.34-3_amd64.deb
libfontembed1_1.0.34-3_amd64.deb
and then printing works.
Johannes
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of
On Tue, Jul 09, 2013 at 04:01:22PM +0100, Brian Potkin wrote:
On Tue 09 Jul 2013 at 14:11:47 +0100, Brian Potkin wrote:
However, the Gutenprint and postscript driver both worked to produce
an expected output in /tmp. This is reason enough to question whether
No they didn't! I really
Package: cryptsetup
Version: 2:1.6.1-1
Severity: normal
Dear Maintainer,
when using cryptdisks_start manually (for USB stick)
the tty echo is left disabled, I need to use stty echo
to reenable it. I think the bug has been introduced
in askpass.c which fails to call disable_method(NULL)
on
On Sat, Mar 19, 2011 at 05:49:04PM +, Richard Kettlewell wrote:
(see also bugs.debian.org/618930
...
I have a TP-Link TL-WN321G USB wireless adapter, which is a badged
Ralink RT2070. Under Debian's 2.6.32 this worked smoothly with
rt2870sta. On upgrading to Debian's 2.6.38, however, only
Package: python2.6
Version: 2.6.6-8
Severity: important
Tags: upstream
(Severity: important because of possible security relevance)
The Python ssl module documentation says:
http://docs.python.org/release/2.6.6/library/ssl.html
If not specified, for client-side operation, the default SSL
Package: aptitude
Version: 0.6.3-3.1
Severity: normal
I wanted to search for package description using ~d pattern,
but when typing the ~ into the find dialog aptitude crashes:
Ouch! Got SIGABRT, dying..
Aborted
-- Package-specific info:
aptitude 0.6.3 compiled at Aug 26 2010 20:10:19
On Tue, Nov 10, 2009 at 07:32:40PM +0100, Felix Zielcke wrote:
Am Dienstag, den 10.11.2009, 19:09 +0100 schrieb Johannes Stezenbach:
PS: I tried GRUB_GFXMODE=1600x1200x32 without GRUB_TERMINAL=console,
but grub2 then just appears in a small rectangle in the upper left
corner
I was using a somewhat non-standard vga=0x376 (AMD RS780 chipset graphics),
which is not supported by grub2 (grub2 apparently uses a hardcoded list
of vesa modes for vga= parsing which have nothing to do with the mode which
the VESA BIOS actually supports).
To get it working I needed:
- insmod
Package: pdftk
Version: 1.41-3
Severity: grave
Justification: renders package unusable
Currently pdftk cannot be installed due to
dependency on libgcj8-1.
It seems libgcj8-1 has been removed from sid,
libgcj9-0 and libgcj10 are available.
-- System Information:
Debian Release: squeeze/sid
APT
On Thu, Jul 16, 2009 at 08:10:40AM +0200, Yves-Alexis Perez wrote:
xfce4-terminal 0.2.90 (in experimental) now uses file system monitoring.
Could you check if it fixes the problem? (shouldn't need any extra
dependency and it's quite safe to run it atm)
I installed
Package: xfce4-terminal
Version: 0.2.12-3
Severity: important
xfce4-terminal crashes reproducibly when trying to change preferences.
Steps to reproduce:
- start xfce4-terminal
- open a second tab
- close the second tab
- open preferences, go to Advanced - Double click and
change the word chars
On Mon, Jun 15, 2009 at 09:32:03PM +0200, Yves-Alexis Perez wrote:
On lun, 2009-06-15 at 18:32 +0200, Johannes Stezenbach wrote:
xfce4-terminal crashes reproducibly when trying to change preferences.
Steps to reproduce:
- start xfce4-terminal
- open a second tab
- close the second
Package: mc
Version: 2:4.6.2-2
Severity: normal
mc fails to display zipfile contents after unzip update.
Simply setting $op_has_zipinfo=1 seems to fix it
for me, don't know if there is a better fix.
zzz:/usr/share/mc/extfs# diff -u uzip.orig uzip
--- uzip.orig 2009-05-11 17:55:05.0
On Wed, Jan 07, 2009, Wonka wrote:
Christian Marillat wrote:
I've already received the same bug report but I'm unable to reproduce
this bug here.
1. run mplayer, playing some video, with parameter -vf screenshot or
vf=screenshot in ~/.mplayer/config
2. see the following lines:
Package: mysql-server-5.0
Version: 5.0.75-1
Severity: normal
Tags: patch
The mysql_secure_installation fails when the mysql root
password contains characters which need quoting (like !$%#).
Fix:
--- /usr/bin/mysql_secure_installation 2008-12-22 14:15:59.0 +0100
+++
Package: listadmin
Version: 2.40-2.1
Severity: grave
Tags: patch
Justification: renders package unusable
2.32-1 worked, but after update to 2.40-2.1 listadmin only displays
fetching data for foo ... nothing in queue.
This patch fixes it for me:
--- /usr/bin/listadmin 2008-08-11
Package: libpam-modules
Version: 1.0.1-1
Severity: normal
I use xscreensaver to lock my screen, and while this works OK I get
the following warnings in syslog when unlocking the screen:
Aug 1 18:43:33 abc xscreensaver[7872]: pam_unix(xscreensaver:auth): access
denied: tty ':0.0' is not
On Thu, May 08, 2008 at 07:27:14AM +0200, Michael Koch wrote:
On Thu, Jul 19, 2007 at 02:28:45PM +0200, Johannes Stezenbach wrote:
Package: eclipse
Version: 3.2.2-2
Severity: normal
I created an example eclipse pluging using he Hello world
template in he New Pluging Project wizard. I
Package: eclipse
Version: 3.2.2-2
Severity: normal
I created an example eclipse pluging using he Hello world
template in he New Pluging Project wizard. I then wanted
to export the plugin as Deployable Plugins and Fragments
into a zip file, which fails with an error:
Could not find one or more
Package: eclipse
Version: 3.2.2-2
Severity: normal
I installed the eclipse package with all its dependencies.
After that, if I select Help - Help Contents I get a
documentation is not installed error.
If I also install eclipse-cdt, the CDT help _is_ available.
Odd: I looked at the list of files
Package: dnsmasq
Version: 2.37-1
Severity: normal
If dnsmasq gets a DNS standard query response with a
reply code of server failure, it repeats the request
infinitely instead of giving up.
I can trigger this at the moment e.g. by running
$ host 1.0.0.127.relays.visi.com
;; connection timed
On Thu, Feb 08, 2007 at 03:19:30PM +, Simon Kelley wrote:
Johannes Stezenbach wrote:
Package: dnsmasq
Version: 2.37-1
Severity: normal
If dnsmasq gets a DNS standard query response with a
reply code of server failure, it repeats the request
infinitely instead of giving up.
OK
On Mon, Oct 23, 2006, Andreas Tscharner wrote:
Johannes Stezenbach wrote:
Package: cvsnt
Version: 2.5.03.2382-2
Severity: normal
Tags: patch
NTLMSSP authentication against a Windows cvsnt server fails.
[snip]
The attached patch fixes this, and makes NTLM auth work for me
Package: cvsnt
Version: 2.5.03.2382-2
Severity: normal
Tags: patch
NTLMSSP authentication against a Windows cvsnt server fails.
I have an older, hacked cvsnt version which works, and by comparing
tcpdumps I found out that the pointer field of the second
string (domain/workstation) of the type 1
Package: file
Version: 4.17-4
Severity: normal
Tags: patch
MPEG ADTS, layer I, v1 files are not recognized since
the test for the sample rate in byte at offset 2
suffers from a signedness problem (byte vs. ubyte).
Patch attached.
Thanks,
Johannes
-- System Information:
Debian Release:
Package: dnsmasq
Version: 2.33-1+b1
Severity: normal
Tags: patch
I have to use a VPN connection (using vpnc) for some of my work.
The same hostname might then resolve to a different IP address
when the VPN connection is up or down.
resolvconf correctly updates /var/run/dnsmasq/resolv.conf,
and
Package: ripit
Version: 3.5.1-1
Severity: normal
At startup, ripit causes a number of the following errors:
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x50 { LastFailedSense=0x05 }
ide: failed opcode was: unknown
ATAPI device hdc:
Error:
On Sun, Sep 24, 2006 at 10:35:43PM +0200, Elimar Riesebieter wrote:
On Sun, 24 Sep 2006 the mental interface of
Johannes Stezenbach told:
After I have ripped a few CDs, the kernel finally says:
cdrom: dropping to single frame dma
and after that CD ripping is extremely slow until
On Mon, Apr 24, 2006, Johannes Stezenbach wrote:
On Sat, Apr 22, 2006, Lucas Bonnet wrote:
Is the patch applied to the modular Xorg packages ?
I updated to modular X today, and sadly it crashed after
a few minutes (T42p, FireGL Mobility T2).
I don't know how to map the version number
On Sat, Apr 22, 2006, Lucas Bonnet wrote:
Is the patch applied to the modular Xorg packages ?
I updated to modular X today, and sadly it crashed after
a few minutes (T42p, FireGL Mobility T2).
I don't know how to map the version number of the
xserver-xorg-video-ati-6.5.7.3 source package to X
On Mon, Mar 27, 2006, Yves-Alexis Perez wrote:
On Mon, 2006-03-27 at 11:10 +0200, Nando Santagata wrote:
Package: xfce4-panel
Version: 4.2.3-1
Severity: grave
Justification: renders package unusable
I'm using sid.
I verified this bug after the last upgrade of the libc6 package.
After some hours of research here are my findings:
This issue is tracked at x.org:
https://bugs.freedesktop.org/show_bug.cgi?id=4847
And the cited patch by Benjamin Herrenschmidt fixes the issue for me:
http://lists.freedesktop.org/archives/xorg/2005-December/011678.html
:-)
--
To
Package: xserver-xorg
Version: 6.9.0.dfsg.1-2
Followup-For: Bug #345929
I see something which fits some of the other descriptions
for bug #345929:
6.8.2.dfsg.1-11 worked perfect, after upgrade to 6.9.0
my IBM T42p regularly crashes hard (no SysRq, no ping,
the whole thing is just frozen; kernel
Package: libc6
Version: 2.3.2.ds1-20
starting from kernel 2.6.11 the DVB drivers support more than 4 cards
by using minor numbers 255. However, udev fails. Creating nodes
manually with mknod(8) fails, too. udev works when it is built
with USE_KLIBC=true.
Bug#289945 addresses this problem,
54 matches
Mail list logo
