ess: avoid causing autofs mounts
to be triggered
if they are not yet mounted unless explicitly requested by the user.
Cheers,
Juha
-- System Information:
Debian Release: trixie/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 6.4.0-2-amd64 (S
This no longer happens. Thanks for reminding me of the open bug. Please close
as far as I'm concerned.
ck kwallet: password has been saved, but
send another email and kmail asks for password again instead of getting it from
the wallet.
Cheers,
Juha
-- System Information:
Debian Release: bookworm/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 5.14
re 'dnsruby'
=> true
Most probably "ruby-addressable" should be added as a dependency
for "ruby-dnsruby" ?
Juha Erkkilä
-- System Information:
Debian Release: 10.6
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
For
After reporting the bug, I found this article:
https://hobo.house/2018/05/18/fix-for-intel-i915-gpu-freeze-on-recent-linux-kernels/
and tried what is suggested, i.e., added file
cat > /etc/X11/xorg.conf.d/10-intel.conf <
be appreciated.
-- Juha
Acer C740
$ lscpu
Architecture:x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
Address sizes: 39 bits physical, 48 bits virtual
CPU(s): 2
On-line CPU(s) list: 0,1
Thread(s) per core: 1
Core(s) per socket: 2
t;, msg)[0].lower()
It would nice to get rid of it.
-- Juha
set at position 1
c = findall("[[(](\S+)/\S+[])]", msg)[0].lower()
-- Juha
d will time out
trying to load the corresponding socket.
I even removed every .socket file related to sssd from my systemd but
it didn't help (yes, I did a daemon-reexec and daemon-reload).
Only fix I managed to find is a downgrade to 1.16.3-3.1.
Cheers,
Juha
-- System Information:
Debian Release: bulls
I installed 4.19.28-2~bpo9+1 and haven't encountered any hangs with it.
Package: kmail
Version: 4:18.08.3-1
Severity: important
Dear Maintainer,
* What led up to the situation?
I replied to an email in the Inbox of an imap account, which is set up to keep
replies in the same folder.
* What exactly did you do (or not do) that was effective (or
Package: kmail
Version: 4:18.08.3-1
Severity: important
Dear Maintainer,
Kmail sometimes sigsegvs while (seemingly) idle. Needless to say this
seriously degrades its usability. I think this has only ever happened while
moving the mouse pointer across the window. Just moving, not clicking
se message window is closed. It does
not
matter what causes the window to close, even sending a message sometimes causes
a
crash.
Cheers,
Juha
-- System Information:
Debian Release: buster/sid
APT prefers unstable-debug
APT policy: (500, 'unstable-debug'), (500, 'unstable'), (1, 'ex
a day, it makes kmail's usability quite abysmal.
Cheers,
Juha
-- System Information:
Debian Release: buster/sid
APT prefers unstable-debug
APT policy: (500, 'unstable-debug'), (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 4.18.0-2-amd64 (SMP w/2 CPU cores
should be RC.
Cheers,
Juha
-- System Information:
Debian Release: buster/sid
APT prefers unstable-debug
APT policy: (500, 'unstable-debug'), (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 4.18.0-2-amd64 (SMP w/2 CPU cores)
Kernel taint flags: TAINT_WARN
Locale
(presumably
because
the old copy is still alive).
Cheers,
Juha
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome
next Debian stable comes out. Let me know if more
information is needed.
-- Juha
-
$ uname
Linux trout 4.18.0-0.bpo.1-amd64 #1 SMP Debian 4.18.6-1~bpo9+1 (2018-09-13)
x86_64 GNU/Linux
# lshw
trout
description: Laptop
product: Auron_Paine
vendor: GOOGLE
version
ions in the
account config. I am
not sure what it actually is, but I suppose it uses libsasl2-modules-kdexoauth2.
Cheers,
Juha
-- System Information:
Debian Release: buster/sid
APT prefers unstable-debug
APT policy: (500, 'unstable-debug'), (500, 'unstable'), (1, 'experimental')
Architecture:
Package: linux-image-4.17.0-0.bpo.1-amd64
Version: 4.17.8-1~bpo9+1
Boot of my Acer C740 hangs after upgrade of Linux kernel from
linux-image-4.16.0-0.bpo.2-amd64 to linux-image-4.17.0-0.bpo.1-amd64.
Hang happens after console message telling that disk sd has been
stopped.
My Debian is version 9
indows 10 "photos" application,
and the third line creates a
*white*, opaque rectangle. Obviously, all should create a white rectangle.
Cheers,
Juha
-- Package-specific info:
ImageMagick program version
---
animate: ImageMagick 6.9.9-39 Q16 x86_64 20180318 http://w
package name. Does Debian have some policies
about directory names?
-Juha
. The change was because enterprisey distros have older systemd's that
don't support ~ in paths.
You'll have to patch boinc-client.service for Debians.
Cheers,
Juha
-- Package-specific info:
-- Contents of /etc/default/boinc-client:
# This file is /etc/default/boinc-client, it is a configuration file
cover. The service seems to start when needed and responds to some queries
but always ends
auth process with
[sssd[pam]] [pam_dp_process_reply] (0x0010): Reply error.
And this means auth failure for pam of course.
Cheers,
Juha
P.S. This may be "works as intended" but considering it too
ode=exited status=1
Sep 2 10:12:37 rautu systemd[1]: Failed to start LSB: Galera Arbitrator Daemon.
Sep 2 10:12:37 rautu systemd[1]: garb.service: Unit entered failed state.
Sep 2 10:12:37 rautu systemd[1]: garb.service: Failed with result 'exit-code'.
Access to gvwstate.dat file should work out of the box.
-- Juha
Still exists in 1.9.1-1+b1.
This bug is almost two years old with no activity what so ever from the
maintainer. It the package still being maintained?
t commit is this:
https://git.launchpad.net/grub/commit/?id=951306c5094d2bfb46d5baedfde84a2015c4a3fa
However, because this issue occurs with the latest default kernel in
Stretch, I feel the issue is serious enough to warrant a bug report.
Juha
-- System Information:
Debian Release: 9.1
APT prefers stable
AP
35 jessie systemd[1]: Failed to start PowerDNS Authoritative
Server.
When I then did this:
# apt-get purge pdns-backend-bind
pdns_server started without problems.
-- Juha
.
I can remove it, but first you have to fix pdns-server package so that
forcing bind backend package does not break the whole Jessie -> Stretch
upgrade process.
-- Juha
o be
> installed during the release upgrade.
Hundreds of packages got upgraded in my Jessie -> Stretch transition.
In practice, it is impossible to review all of them in advance. In my
case, pdns-server was the only one that broke the upgrade.
-- Juha
email.
The explanation was unsatisfactory and I already replied separately. The
bug report should not have been closed.
-- Juha
the upgrade done without installation of
pdns-backend-bind?
-- Juha
but it cannot be brought up:
# hciconfig hci0 up
Can't init device hci0: Invalid request code (56)
#
Cheers,
Juha
DN).
This is a test upgrade from jessie to stretch, so there is no hurry to
get postfix working.
My point still is, this is the first Debian release in my quite long
history, where postfix does not install without manual configuration.
Until now, there has been some working defaults.
-- Juha
exit status 75
Processing triggers for systemd (232-25) ...
Processing triggers for rsyslog (8.24.0-1) ...
Errors were encountered while processing:
postfix
E: Sub-process /usr/bin/dpkg returned an error code (1)
I was not able to figure out if this exact issue has already been
reported.
-- Juha
g about what
is going on.
-- Juha
Vasudev Kamath writes:
>
> From the changelog of the packageits already done, Upstream stopped
> shipping fonts
OK thanks, I switch in Emacs to Noto Mono:
(add-to-list 'default-frame-alist '(font . "Noto Mono-10"))
-- Juha
The offending line is here:
function setURL($url)
{
$this->_url = Net_URL($url, $this->_useBrackets);
This page used to work on Jessie, but now fails on Stretch.
-- Juha
n of fonts-droid:
fonts-droid-fallback (1:6.0.1r16-1.1) breaks fonts-droid (<< 1:6.0.0r26-1~)
and is installed.
Could you, please, include Droid Sans Mono to fonts-droid-fallback
package or let people know what name they should use instead of 'Droid
Sans Mono'.
-- Juha
the same, though, because the pam_group
mechanism can be used to set a different set of groups for each
pam-service.
Juha
is
provided".
Probably this service does not do any authentication, though?
Juha
ger. I do not think pam_group is here to blame.
It might be an issue with gdm, through, but, because the "systemd"
user instance did not catch the groups, the problem is somewhere there.
I found one bug report which appears to be on the
same issue: https://bugs.debian.org/cgi-bin/bugreport.cgi?bu
Free Software smite me.)
Cheers,
Juha
signature.asc
Description: This is a digitally signed message part.
ams I would actually prefer that?
This brings back memories of security bugs in Windows programs in the 90s
which were claimed to be features by MS… MS has learned since…
Cheers,
Juha
> I think the only chance to run alsamixer without starting pulse is
> to pulseaudio -k and autospawn pulse.
Is this not a bug?
Cheers,
Juha
autospawn does not fix the bug, it merely hides it in many circumstances.
Furthermore, in my case, I actually want to keep autospawn – for those
programs which actually wants to use pulseaudio. But at the same time, I want
alsamixer -c0 (and a host of other programs) not to mute my mixer
ack screen
with a blinking text-mode cursor at the top left corner. The actual X session
is never recovered.
It can be recovered, though, by logging into a free virtual terminal and using
loginctl unlock-session 2
where 2 happens to be the session number I have been given.
Cheers,
Juha
er user.
Could it be pulseaudio/alsa just naively think "pulseaudio running, let's use
it" without considering whether they actually *can* use it or not? And when it
cannot be used, a new daemon is fired up? Just guessing.
Cheers,
Juha
signature.asc
Description: This is a digitally signed message part.
is that pulseaudio gets started in the first
place.
Cheers,
Juha
signature.asc
Description: This is a digitally signed message part.
r programs, like mixer levels
changing and other programs suddenly defaulting to using pa.
Cheers,
Juha
-- System Information:
Debian Release: 8.5
APT prefers stable
APT policy: (995, 'stable'), (500, 'stable-updates'), (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Ker
Package: mpd
Version: 0.19.12-1~bpo8+1
Severity: normal
Dear Maintainer,
When mpd runs, it also runs pulseaudio. This is not just unnecessary, but also
causes weird
unwanted side-effects like muting of Master volume channel in alsa (which mpd
is also not
configured to use).
Cheers,
Juha
on.
At the very least, those of us also planning to upgrade to stretch in the not-
so-distant future would be rather happy to see this resolved before freeze.
Cheers,
Juha
downgrades well (I'd have to basically downgrade sid to a dated version in
archive).
Please close.
Cheers,
Juha
On Friday, 30 September 2016 16:59:20 BST Michael Biebl wrote:
> Control: severity -1 important
>
> Am 28.09.2016 um 02:48 schrieb Michael Biebl:
> > Any news?
on network-manager disconnected the network before reconnecting them
again. At least back then it managed to reconnect, so one only needed to run
upgrades in a screen (sensible precaution for remote upgrades anyway). Now
it does not reconnect, ever, so screen does not help.
Cheers,
Juha
-- System
Peter Colberg writes:
> This is probably a regression of the porting from Qt3 to Qt5.
>
> Could you forward your report to the upstream issue tracker?
>
> https://github.com/LubosD/twinkle/issues
Done https://github.com/LubosD/twinkle/issues/74, Juha
us version was. It was
certainly newer than the original reporter's version.
I tried running owncloud under strace but then it suddenly behaves normally,
so could not even find out WHAT it is doing consuming all my cpu.
Cheers,
Juha
-- System Information:
Debian Release: stretch/sid
APT prefer
Block' is registered using qRegisterMetaType().)
Regards,
-- Juha
in question just broke
and is now on it's way to Samsung and they say "two weeks"!
Cheers,
Juha
On Thursday 21 Jul 2016 10:18:31 Martin Steigerwald wrote:
> Dear Juha,
>
> Am Mittwoch, 20. Juli 2016, 23:40:41 CEST schrieb Juha Jäykkä:
> > Package: kde-telepathy-contact-li
not become "available". It gives no error
messages, warnings or any other indication that it is even trying to do
anything.
Cheers,
Juha
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_6
is automatically available.
Even the last 7.4 version would do.
If Debian policies prevent that then at least please add the latest version
to backports. In BOINC forums Ubuntu/Mint users are often told to install
newer BOINC from your PPA but can't do that with Debian :/
Thanks,
Juha
using
the same printer queue. The newer gwenview simply prints the long edge of the
parallel to the short edge of the paper, centers it on the paper (both edges)
and scales to maximum size (i.e. short edge size). I did ask gwenview to "fit
to page".
Cheers,
Juha
-- System Information:
Debi
l I ended up with
gss-group14-sha1 which results in
Unsupported KEX algorithm "gss-group14-sha1"
so I'm at a loss here.
This could be a duplicate of
https://bugzilla.redhat.com/show_bug.cgi?id=1261414
but since I get no error message and 6.9 works fine, I doubt it.
Cheers,
Juha
root, too.
Please see
http://lists.mindrot.org/pipermail/openssh-bugs/2015-September/015366.html
for more details.
Cheers,
Juha
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Arc
I too would like to see ELAN I2C Touchpad supported by Debian kernel and
would like that support to be tricked down from unstable to stretch and
from there to jessie backports.
Has there been any progress on this?
-- Juha
540 but
the fix (or does it actually happen to be just pure luck?) there does not help
here.
Cheers,
Juha
-- System Information:
Debian Release: 8.2
APT prefers stable
APT policy: (1100, 'stable'), (1000, 'stable-updates'), (900, 'stable'),
(500, 'unstable')
Architecture: amd64 (
didate
packages containing said file so there is no workaround.
Cheers,
Juha
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4
Daniel Pocock writes:
> c) maybe we could split the package to have a browser-only version that
> doesn't need any of this compiled code? That would be less painful to
> support.
good idea.
-- juha
to focus the password entry
textedit box without a pointing device. Oddly enough, about 50% of the time, the
box is focused automatically, allowing mouseless unlocking.
Cheers,
Juha
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500
this warrants grave and possibly a duplicate of #787755 as I
simultaneously lost
the ability to search for programs too.
Cheers,
Juha
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: amd64 (x86_64)
Foreign
all the way (to sd card) and will report if I notice any
other issues.
-- Juha
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
/debian-boot/2015/01/msg00300.html
but no reason or fix has been given.
As workaround, I have had to use Wheezy installer and then upgrade to
Jessie. I have also tried some recent Ubuntu installers and they work
fine on Acer C720.
-- Juha Heinanen
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ
Package: emacs24
Version: 24.4+1-5
When I start emacs in terminal window, it outputs the Gtk related
warnings shown below.
-- Juha
(emacs:20962): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:57:17:
Theming engine 'unico' not found
(emacs:20962): Gtk-WARNING **: Theme parsing error
.
Will version 1.4.4 of xfce4-power-manager ever make it to Debian jessie
or to jessie backports?
-- Juha
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
by
jessie bluez, pulseaudio is my only possibility.
I don't know against which package I should submit this. Please let me
know if some other than pulseaudio.
-- Juha
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
patch is attached which correctly enumerates said user and group and takes the
appropriate
action in both cases.
Best regards,
Juha
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (995, 'testing'), (990, 'unstable'), (1, 'experimental')
Architecture: amd64
Package: libxml2
Version: 2.8.0+dfsg1-7+wheezy2
Severity: important
Dear Maintainer,
After security upgrade of the package from version
libxml2_2.8.0+dfsg1-7+wheezy1_amd64.deb to
libxml2_2.8.0+dfsg1-7+wheezy2_amd64.deb, sylkserver application (http://ag-
options are missing.
Regards,
Juha
send
update failed: SERVFAIL
quit
This happens probably because samba(-tool) doesn't know anything about the
record.
The above leads to the situation that I'm unable to modify any added
records.
Please let me know if you need more information.
Regards,
Juha
-- System Information:
Debian
haven't tried 3.15 series.
Regards,
Juha
-- Package-specific info:
** Version:
Linux version 3.16-2-amd64 (debian-ker...@lists.debian.org) (gcc version 4.8.3
(Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)
** Command line:
BOOT_IMAGE=/vmlinuz-3.16-2-amd64 root=/dev/mapper/vg0-root ro
Package: rsyslog
Version: 8.4.0-2
Severity: normal
Hello,
rsyslog seems to completely ignore RSYSLOGD_OPTIONS set in /etc/default/rsyslog
and rsyslogd is always started with -n. This happens at least when using
systemd.
Regards,
Juha
-- System Information:
Debian Release: 7.6
APT prefers
Package: libav
Severity: normal
Tags: patch
Dear Maintainer,
APE audio decoding is broken, but there is a patch to fix it.
https://lists.libav.org/pipermail/libav-devel/2013-August/050270.html
-- System Information:
Debian Release: 7.4
APT prefers stable-updates
APT policy: (500,
Package: fbreader-0.99.4
Version: 0.99.4
Severity: important
Dear Maintainer,
I am running LMDE based on debian testing, newest version.
I installed FBReader 0.99.4 from debian source package, and tried it.
(fbreader home page, debian source package)
Now, on *some* epub books whe trying to
: nothing. No questions, no dialogs, nothing. Or at least an option to
turn this annoying new feature off.
Bug 2: Just one question per buffer.
Bug 3: Buffer saved according to my wish.
Cheers,
Juha
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable
,
wxvbam.xrs$src_wx_wxvbam.xrc) failed with error 2!
So I did only install wx-common and had not installed zip. I think it should be
a dependency.
Best regards,
--Juha
-- System Information:
Debian Release: 6.0.7
APT prefers oldstable-updates
APT policy: (500, 'oldstable-updates'), (500
). There was bug that caused notification timeout not
No, I cannot. So, from my point of view, #664247 can be closed. I think the
other problems you mention are different and should not be dealt with here.
Thanks.
-Juha
includes cron jobs that take care of syncing and expiring the token database
-- juha
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Alexander Wirt writes:
Its NEWS.Debian, because its a change in packaging and therefore unimportant
for new installations.
same result:
$ sudo gunzip /usr/share/doc/amavisd-new/NEWS.Debian.gz
$ egrep -i cron /usr/share/doc/amavisd-new/NEWS.Debian
$
-- juha
--
To UNSUBSCRIBE, email
and delete the latter?
in any case this is very confusing to a non-expert debian user.
-- juha
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
/..
instead.
Cheers,
Juha
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-3-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh
Juha, I think this bug is never going to be fixed unless someone can give
us a clear path to reproducing it. I think you're the person in a best
This happened at an upgrade, which does not happen all that often, especially
now that wheezy is frozen, so it is rather hard to try to reproduce
Package: dpkg
Version: 1.16.8
Severity: normal
File: /usr/bin/update-alternatives
Dear Maintainer,
-- What led to this? The big java bug and its fix
-- What did I do? Well:
Now, first some background: I am all for free software. Such as OpenJDK, and
IcedTeaPlugin and... However, my netbank
Package: iceweasel
Version: 10.0.6esr-2
Followup-For: Bug #360147
The bug still exists.
Could the maintainers mark this with wontfix or something? The bug has been
open for over SIX YEARS so it is obvious it will never be fixed (unless by
accident).
-Juha
-- Package-specific info
,
Thanks for the patch. I build and installed patched linux-image and
after that I have not seen those syslog messages anymore. So looks like
the patch fixed the issue.
-- Juha
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
Package: src:linux
Version: 3.2.21-3
Severity: normal
Dear Maintainer,
Recently I noticed that syslog is flooded with these kind of messages:
Aug 6 16:43:26 siika kernel: [ 657.856294] ehci_hcd :00:12.2: PME#
enabled
Aug 6 16:43:26 siika kernel: [ 658.324244] ehci_hcd :00:12.2: BAR
to really delete the deleted files is to open a console
and remove them manually, like,
sudo rm -rf .trash_
which is IRRITATING.
Respectfully
Juha Mäkinen
xjuham(AT)kolumbus.fi
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture
Package: modemmanager
Version: 0.5.2.0-1
Severity: important
Dear Maintainer,
3G modem (Ericsson F5521gw) doesn't connect after suspend on Lenovo Thinkpad
e320. Actually the mobile broadband couldn't be activated at all. It works
after reboot until the computer is suspended. If the power is
Package: pdns-server
Version: 3.1-4
Severity: normal
Dear Maintainer,
After I did yesterday 'apt-get dist-upgrade' of my debian wheezy host, pdns
server started to repeatedly write to syslog these messages:
Jul 11 07:28:15 siika pdns[3366]: Our pdns instance exited with code 1
Jul 11 07:28:15
/pdns.d:
4 -rw-r--r-- 1 root root 55 Jun 29 00:00 pdns.simplebind
The error messages disappeared after I deleted this file. Does deleting
it break something else?
-- Juha
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
, but NOT in case of upgrade. it is
bad and user unfriendly idea to break working setups during upgrade.
-- juha
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
The emacs package doesn't provide Emacs itself. I suppose that the
real bug is in emacs23, because I have no such problem with emacs24.
Sorry for the confusion. Yes, emacs23 is what I have.
Cheers,
Juha
Package: xen-utils-4.0
Version: 4.0.1-5.2
Severity: important
Tags: upstream patch
pygrub in Debian Squueze does not support Grub2 submenus. At least
Ubuntu Precise uses a submenu for older kernel versions, so a Precise
domU with more than one kernel installed will be unbootable (without
manual
1 - 100 of 325 matches
Mail list logo
