On Thu, May 05 2022, Tobias Frost wrote:
> I've just gave you access rights to the repo on salsa, you should be able to
> commit directly.
> For the review and upload, an git reference or mentors upload will works both
> for me.
[...]
> ✔. You can remove the "moreinfo" tag on this bug to signal
Hi Jan and Tobias,
@Jan good to hear from you.
@Tobias, thanks for useful suggestions, see my reactions below.
On Tue, May 03 2022, Jan Dittberner wrote:
> As you might have guessed I'm busier than I would like and do usually need a
> bit of time to respond.
>
> It would have been a good idea to
the hardware support using AppStream
* Add usbrelayd(8) manpage
* Fix spelling error
Additional comments can be found in some commit messages at
https://salsa.debian.org/wentasah/usbrelay/-/commits/master.
Regards,
--
Michal Sojka
Package: certbot
Version: 1.12.0-2
Severity: normal
Dear Maintainer,
on systemd-based systems, certificate renewal is run via combination
of systemd timer and service. When the service fails, the systemd
service is marked as failed, but the administrator is not notified
about that. I'd
I experience this after upgrading to bullseye too. Based on my
investigations, the problem is a race between invocation of `btrfs
device scan` in initramfs and kernel block device detection. The scan
is run at the time, when only one of the devices needed for RAID1 has
been detected by the kernel.
On Tue, Jan 14 2020, Alexis Bienvenüe wrote:
> Thanks for the report.
>
> Le jeudi 09 janvier 2020 à 17:22 +0100, Michal Sojka a écrit :
>> I was able to get rid of it by manually installing
>> liblocale-codes-perl so I think that auto-multiple-choice-common
>> sh
Package: auto-multiple-choice-common
Version: 1.4.0-2
Severity: normal
Dear Maintainer,
when I run auto-multiple-choice, I get the following error:
Can't locate Locale/Language.pm in @INC (you may need to install
the Locale::Language module) (@INC contains: /etc/perl
Package: pylint
Version: 2.2.2-2
Severity: normal
Dear Maintainer,
the package installs /etc/emacs/site-start.d/50pylint.el, which setups
hooks and autoloads referring to pylint.el, which is not included in
the binary package. This causes Emacs failures when opening any *.py
file. Could you
Package: libboost1.62-doc
Severity: normal
Dear Maintainer,
this package does not have any HTML files in
/usr/share/doc/libboost1.62-doc/HTML directory. I consider this a bug,
because libboost1.58-doc contains HTML documentation in
/usr/share/doc/libboost1.58-doc/HTML/.
Best regards
-Michal
Hi all,
I'm still having this problem with current sid. When I added
"active-monitor=0" to /etc/lightdm/lightdm-gtk-greeter.conf, as
suggested in https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=785055,
the problem disappeared.
-Michal
Package: fp-utils-3.0.0
Version: 3.0.0+dfsg-4
Severity: normal
Dear Maintainer,
this package breaks my LaTeX installation. When I compile my LaTex
document, I get the following error:
! Package caption Error: For a successful cooperation we need at least
version
(caption)
Package: mosh
Version: 1.2.5-1
Severity: important
Dear Maintainer,
an attempt to install mosh in unstable results in this error message:
The following packages have unmet dependencies:
mosh : Depends: libprotobuf9 but it is not going to be installed
E: Unable to correct problems, you have
Source: ghc-mod
Version: 5.2.1.1-3
Severity: important
Dear Maintainer,
ghc-mode cannot be installed on unstable, because it depends on
unavailable package ghc ( 7.6.3+).
Best regards,
-Michal
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500,
Package: nginx
Version: 1.6.2-5
Severity: normal
Dear Maintainer,
I have the following in my nginx configuration:
server {
listen mylocalserver:80;
server_name mylocalserver;
# ...
}
and the following line in /etc/hosts:
127.0.1.2 mylocalserver
On Po, říj 27 2014, Rene Engelhard wrote:
On Mon, Oct 27, 2014 at 11:24:43AM +0100, Michal Sojka wrote:
I can reproduce this in both unstable and testing
(1:4.3.3~rc2~git20141011-1). I cannot reproduce this in the version
And why are you then not marking it as such?
How can I do
Package: gnome-control-center
Version: 1:3.14.1-1 1:3.14.0-1
Severity: normal
Dear Maintainer,
after fresh boot of my computer, output tab of gnome-control-center
sound (GCCS) shows two output devices: HDMI/DisplayPort and LineOut.
After suspend/resume, the LineOut device always disappears and
HDMI does not appear in pavucontrol Profile list box before
suspend/resume.
Sorry, the above sentence is not true. The rest of the bug report is
(hopefully) correct.
-Michal
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
On Sat, Oct 25 2014, Rene Engelhard wrote:
found 766788 1:4.3.3~rc2~git20141011-1
severity 766788 normal
thanks
Hi,
On Sat, Oct 25, 2014 at 09:00:37PM +0200, Michal Sojka wrote:
LibreOffice Writer crashes after performing the following steps:
1. Start lowriter (when started from
Package: libreoffice-writer
Version: 1:4.3.3~rc2-1
Severity: important
Dear Maintainer,
LibreOffice Writer crashes after performing the following steps:
1. Start lowriter (when started from terminal, an error message can be
seen, otherwise the crash is silent).
2. Press '[' and keep it
Package: geximon
Version: 0.7.7-2.1
Severity: important
Dear Maintainer,
I freshly installed geximon and run it from the command line. The
result is the following error message:
Attempt to unlock mutex that was not locked
[1]3375 abort geximon
No GUI windows appears, just the
Hi,
I also have the same (or similar) problem. This is what I found. The
solution that worked for me is at the end of the mail.
# dpkg -i /var/cache/apt/archives/systemd_215-4_amd64.deb
(Reading database ... 729731 files and directories currently installed.)
Preparing to unpack
On Sat, Sep 27 2014, Michael Biebl wrote:
Am 27.09.2014 um 13:08 schrieb Michal Sojka:
+ addgroup --quiet --system systemd-journal
After running 'delgroup systemd-journal', it was possible install the
package.
With the amount of information from the original bug submitter, it's
hard
Package: adduser
Version: 3.113+nmu3
Severity: normal
Dear Maintainer,
according to the man page, --quiet is supposed to suppress only
informational messages, not errors or warnings. However there are cases
when addgroup returns a non-zero exit code without printing any message,
for example,
On Sat, Sep 27 2014, Michael Biebl wrote:
Am 27.09.2014 um 15:09 schrieb Michal Sojka:
Yes, that's right. It's a annoying that --quiet suppress the error
message in this case.
Agreed. I think quiet should suppress non-fatal warnings/errors only,
but not messages which will cause it to exit
On Mon, Apr 28 2014, althaser wrote:
Hey Michal,
Could you please still reproduce this issue with newer gnome-control-center
version like 1:3.4.3.1-2 or 1:3.8.3-7 ?
Hi,
the problem is no longer present in 1:3.8.3-7. I think this bug can be
closed.
Thanks,
-Michal
--
To UNSUBSCRIBE, email
Hi,
this problem is fixed upstream. See the top two commits at
https://www.kraxel.org/cgit/amtterm/log/?h=0ece5135fef56dbd0d94957c334655a57adb7212.
Can you please update the package to the upstream (unfortunately
unreleased) version?
Thank you,
-Michal
--
To UNSUBSCRIBE, email to
From 967c47aaffa82243cf700aa879fdf58f2069001f Mon Sep 17 00:00:00 2001
From: Michal Sojka sojk...@fel.cvut.cz
Date: Tue, 28 Jan 2014 08:47:46 +0100
Subject: [PATCH] Append .ini to the configuration file name
couchdb ignores files without .ini extension.
---
debian/extra/python-couchdb | 2
Package: js2-mode
Version: 0~20120726-3
Severity: important
Dear Maintainer,
the Debian-specific initialization of this package does not work (at
least with emacs24) and makes the package unusable without additional
user intervention.
The problems are that the package is searched for in a wrong
Package: shotwell
Version: 0.12.3-2
Severity: important
Tags: patch
Dear Maintainer,
Shotwell in Wheezy crashes on library updates, which renders this
version of package unusable for me. The attached upstream patch fixes
the problem for me. Would it be possible to include a patched version
in
Hi,
the workaround described by Stuart works for me. Thanks.
-Michal
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: gnome-control-center
Version: 1:3.4.2+git20121016.29d7c0-1
Severity: normal
Dear Maintainer,
when wired network is misconfigured, there is no way to fix the
configuration using gnome-control-center, because the Options button
is always disabled.
In my case I selected Network - Wired -
Package: gnome-terminal
Version: 3.4.1.1-2
Severity: normal
Dear Maintainer,
gnome-terminal.wrapper does not handler -x option. This option is used by
nautilus-open-terminal package; in my case it runs x-terminal-emulator -x
The attached patch fixes the problem for me.
Best regards,
On Wed, Nov 21 2012, Simon McVittie wrote:
reassign 693894 nautilus-open-terminal
retitle 693894 runs x-terminal-emulator with non-Policy option -x
tags 693894 - patch
thanks
On 21/11/12 14:22, Michal Sojka wrote:
gnome-terminal.wrapper does not handler -x option. This option is used
Package: ess
Version: 12.09-1
Severity: normal
Dear Maintainer,
My .emacs contains (require 'filladapt) - filladapt is from emacs-goodies-el
package. After installing ess, filladapt stopped working. This happens not
only in ESS modes but also in other modes, which is especially annoying.
When
Hi,
the following patch should IMHO add support for emacs24 in auctex.
Cheers,
-Michal
diff --git a/debian/auctex.bug-script.eperl b/debian/auctex.bug-script.eperl
index 77689d0..856d144 100644
--- a/debian/auctex.bug-script.eperl
+++ b/debian/auctex.bug-script.eperl
@@ -32,7 +32,7 @@ cat 3 EOF
tags 682720 patch
thanks
I forgot to attach the patch.
diff --git a/debian/auctex.postinst.eperl b/debian/auctex.postinst.eperl
index 5681e13..9376623 100644
--- a/debian/auctex.postinst.eperl
+++ b/debian/auctex.postinst.eperl
@@ -84,24 +84,24 @@ db_stop
case ${1} in
(triggered)
Package: auctex
Version: 11.86-10.1
Severity: normal
Dear Maintainer,
triggers are passed to the maintainer script as a single argument. Therefore
it is not possible to iterate over them with 'shift'. The attached patch
changes the iteration loop type from while to for.
It also fix incorrect
Sorry, the patch should have been for #686366.
-M.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
tags 686366 patch
thanks
I forgot to attach the patch.
diff --git a/debian/auctex.postinst.eperl b/debian/auctex.postinst.eperl
index 5681e13..9376623 100644
--- a/debian/auctex.postinst.eperl
+++ b/debian/auctex.postinst.eperl
@@ -84,24 +84,24 @@ db_stop
case ${1} in
(triggered)
This is an updated patch for emacs24 support. It turned out that
previously I sent the older version of the patch without the change in
debian/auctex.emacsen-startup.eperl.
Today is not my day. Sorry for the noise.
-Michal
---
debian/auctex.bug-script.eperl |2 +-
Package: xdg-utils
Version: 1.1.0~rc1+git20111210-6
Severity: normal
Dear Maintainer,
when I run xdg-open with PDF file, my pdf viewer (okular) is called with wrong
arguments. This causes it to open two windows - one with the requesed pdf file
and one which attempts to open file named %i. The
Hi,
any chance that emacs gets the -dbg package? Crashes are more and more
frequent and without -dbg it is hard to debug them.
-Michal
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Hi all,
I've just discovered ControlPersist option and found that it is not
supported in Squeeze. Are there any chances to get these patches to
a Squeeze point release?
Thanks,
Michal
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe.
Package: compiz
Version: 0.8.4-4
Severity: important
Tags: patch
Compiz crashes when gitk is running and one press Alt-Tab to switch
applications.
Details and solution can be found at
https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/579112.
The patch is available at
Package: hal
Version: 0.5.14-3
Severity: normal
When I put my laptop (HP 6710b) into a docking station and use
external keyboard, certain keyboard combinations (e.g. Shift-Left),
generate BrightnessDown keycode. When that happend and the external
keyboard switches to some strange mode where
Package: emacs23
Version: 23.2+1-2
Severity: normal
I'm not able to use semantic-mode. Whenever I run semantic-mode, I get
Failed to find version for newly installed cedet message. According to
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=581648#10, I have
uninstalled the standalone cedet
information
From b565c79d78d9d60e6474f00944ac10db80c519fd Mon Sep 17 00:00:00 2001
From: Michal Sojka sojk...@fel.cvut.cz
Date: Wed, 14 Apr 2010 08:53:32 +0200
Subject: [PATCH] Fix emacs load path
---
debian/git.emacsen-startup |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git
On Wed, 14 Apr 2010, Michal Sojka wrote:
Package: git
Version: 1:1.7.0.4-2
Severity: normal
The load path should be changed from git-core to git.
I found that this change does not solve my problem - I want to be able
to run git-blame-mode and it stopped to work after recent updates. Emacs
On Wed, 14 Apr 2010, Jonathan Nieder wrote:
reassign 576887 git
merge 577745 576887
thanks
Hi Michal,
Michal Sojka wrote:
I found that this change does not solve my problem - I want to be able
to run git-blame-mode and it stopped to work after recent updates. Emacs
support in git
Hi,
I was also hit by this bug. Here are my findings:
The problem was caused by the value of TeX-command-list. In my case, the entry
for latex invocation was:
(LaTeX %l \%(mode)\\input{%t}\ TeX-run-TeX nil
(latex-mode doctex-mode)
:help Run LaTeX)
If I changed it to the following and it
Hi,
I was also hit by this bug. Since I do not need emacs21 anymore, simple
uninstalling that (obsolete) package solved the problem.
Best regards
Michal
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
.
Package's Suggests field is empty.
From f21c4035cbfa256374e8bb6a60e83a4e4c870807 Mon Sep 17 00:00:00 2001
From: Michal Sojka sojk...@fel.cvut.cz
Date: Sat, 4 Jul 2009 21:16:45 +0200
Subject: [PATCH 1/2] Added an option to select which battery to monitor
---
src/battery-stats-collector.c | 48
Package: acpi-support-base
Version: 0.109-11
Severity: normal
When KDE4.2 is running, pressing power button switches the computer off
regardless of settings in Power Management module under System settings. This
is probably because KDE4 is not detected in CheckPolicy in /usr/share/acpi-
Package: kdevelop
Version: 4:3.5.3-3
Severity: important
After starting kdevelop, many menu items are missing. It is even not possible
to create a new project. When started from terminal, the following message
appears:
QObject::connect: Cannot connect PluginController::loadingPlugin(const
at systray.py:122 and is used to
communicate with something called hpssd (see lines 134 and 141). So I
guess there is some problem with the hpssd, which is not correctly
handled in hpdio.py.
Regards
Michal Sojka
--- System information. ---
Architecture: i386
Kernel: Linux 2.6.28.2
Debian Release
On Saturday 01 of March 2008 15:22:22 you wrote:
ok, those two logs look perfect. Not a single Splashy related string
or executing in them.
can you try to edit /etc/default/splashy and change CHVT_TTY to 7 ?
Great, this helped. Now, kdm starts properly.
Thanks Michal
--
To UNSUBSCRIBE,
On Wednesday 27 of February 2008 04:04:32 Luis Mondesi wrote:
Can you change the first line of /etc/init.d/kdm and send us the output?
The line should read:
!#/bin/sh -x
The output is in attachment.
Please note that a new version of Splashy was released and
/etc/lsb-base-logging.sh
use a patched version.
Regards
Michal Sojka
-- Package-specific info:
-- /proc/cmdline
boot=NFS root=/dev/nfs nfsroot=147.32.86.9:/srv/diskless/debian,ro,tcp ro
-- /proc/filesystems
cramfs
-- lsmod
Module Size Used by
i915 17728 2
drm
Package: splashy
Version: 0.3.8-1
Severity: important
After booting with splashy enabled, kdm do not show its login
screen. I have a nvidia card with proprietary drivers. kdm process is
running but not kdm_greet. No keyboard shortcuts (Alt-Fx, Esc, F2) are
working. If I log in from another
On Thursday 15 of November 2007 15:01:05 Michael Biebl wrote:
Michal Sojka schrieb:
If I execute /etc/acpi/sleep.sh of s2ram -f -p -m, suspend to ram works.
If
/etc/acpi/sleep.sh is from acpi-support, s2ram from the uswsusp package,
or whas that a or instead of of?
Of course I meant
Package: wpasupplicant
Version: 0.6.0-4
Severity: normal
Hi,
if I press the kill switch on my laptop with ipw3945, the interface is
not taken down. It means, that even if I'm connected to a wired network,
I'm not able to use it, because there are invalid routes in the routing
table. I've found
Package: network-manager
Version: 0.6.5-3
Severity: normal
Tags: patch
According to interfaces(5) scripts in /etc/network/if-up.d/ should be
executed with PAHSE equal to post-up. NetworkManager sets this to
up.
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy:
On Wednesday 14 of November 2007 19:30:16 Michael Biebl wrote:
Hi Michal,
could you please try the hal version (0.5.10-2) from unstable?
Hi,
even with 0.5.10-2, everything is the same - behavior and messages on stdout.
Then I've tried to add myself to the powerdev group. And it seems this
Package: kpowersave
Version: 0.7.3-1
Severity: normal
Hi,
if I choose Suspend to RAM or Suspend to Disk from KPowersave menu, no
suspend happend and only screen is locked. I guess it has somethink to
do with the messages written to stdout when kpowersave is executed
from command line:
Hi,
I've found this old bug and realized that it is solved in the current version
of KOrganizer in testing (3.5.7). So I guess you can close it.
Michal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: emacs-goodies-el
Version: 26.13-1
Severity: wishlist
Please include newer version of tabbar.el from
http://emhacks.sourceforge.net/. This fixes several problem and adds
new usefull features.
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (990,
Package: korganizer
Version: 4:3.5.5-1
Severity: normal
I'm able to run korganizer from command line, but clicking the
korganizer daemon icon don't start it. When I do it, in
~/.xsession-errors, I get the following:
korganizer: 'url' missing.
korganizer: Use --help to get a list of available
Hello,
I had the same problem with flags. I tried to recompile the package and
now flags are displayed correctly.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: vim-common
Version: 1:6.4-007+1
Severity: minor
Tags: patch
Uncommenting the following part in vimrc leads to errors on
startup. The patch fixes this.
--- /etc/vim/vimrc.dpkg-dist2006-02-12 15:39:20.0 +0100
+++ vimrc.dpkg-dist-fixed 2006-04-07 19:18:23.0 +0200
Package: initramfs-tools
Version: 0.57b
Severity: important
The description of this bug is the same as for #344754. The only
difference is the version of package. The solution presented in
#344754 works in my case as well. The problem appears with standard
Debian kernel 2.6.15-1-686-smp. I
Package: korganizer
Version: 4:3.3.2-3
Severity: minor
When I set the Show next X days option to 7 days and choose a view
mode show next 7 days, after restart this view mode is not remebered
and KOrganizer starts in week view mode. This means that the view
starts on Monday instead of today.
If I
Package: seyon
Version: 2.20c-16
Severity: normal
When I run seyon without any command line options, it fails and prints the
following message.
Option --tclass is no longer supported in this version of gnome-terminal;
you might want to create a profile with the desired setting, and use the new
Package: kmail
Version: 4:3.3.1-3
Severity: normal
I have an email with multiple graphic attachements (PNG files) in my Inbox.
I choose one picture in the Description window (list of attachements) and
then click right mouse button in the displayed picture and chooseOpen With
from menu. After few
Package: showimg
Severity: important
When trying to install showimg, apt wants to remove my KDE. See the following
apt output:
# apt-get install showimg
Reading Package Lists... Done
Building Dependency Tree... Done
The following extra packages will be installed:
kdelibs-bin kdelibs4 libkonq4
Package: kdeprint
Version: 4:3.3.1-4
Severity: important
When adding a new network printer (TCP), after the Driver Selection dialog,
the following box appears:
Unable to load the requested driver:
Unable to create the Foomatic driver [HP-LaserJet_4200,Postscript]. Either
that driver does
75 matches
Mail list logo
