On Wed, Dec 3, 2008 at 5:18 PM, Cesare Leonardi [EMAIL PROTECTED] wrote:
hugo vanwoerkom wrote:
Booting linux-image-2.6.26-1-686 initramfs does not wait for the 2 USB
disks that are in /etc/fstab to show up, causing the
boot to fail.
From what i've heard from previous posts, you can try
package: bugzilla
severity: wishlist
tags: patch l10n
Please consider to add this file to translation of debconf.
pt.po
Description: Binary data
Package: initramfs-tools
Version: 0.92l
Severity: normal
Booting linux-image-2.6.26-1-686 initramfs does not wait for the 2 USB disks
that are in /etc/fstab to show up, causing the
boot to fail.
This is the relevant section of /etc/fstab:
...
# 80GB PATA Seagate disk USB
LABEL=ST380211.01
On Wed, Dec 3, 2008 at 10:30 AM, Bernhard Kleine [EMAIL PROTECTED]wrote:
Am Wed, 03 Dec 2008 16:30:30 +0100 schrieb hugo vanwoerkom:
Package: initramfs-tools
Version: 0.92l
Severity: normal
Booting linux-image-2.6.26-1-686 initramfs does not wait for the 2 USB
disks that are in /etc
I figured it out:
linux-image-2.6.26-1-686 has CONFIG_EDD=m set and I don't set that in my
kernel.
Hugo
Indeed 'edd=off' fixes the problem. I wished I had checked back earlier,
wasted another month with uvesafb.
I still wonder why I don't have to say 'edd=off' with my own rolled kernel
to get vga-791 to work.
I'll close bug 481063.
Thanks for that solution!
Hugo
=0)
Nov 21 05:24:37 debian kernel: [ 418.725455] uvesafb: mode switch failed
(eax=0x14f, err=0). Trying again with
default timings.
Nov 21 05:24:37 debian kernel: [ 418.726021] uvesafb: mode switch failed
(eax=0x14f, err=0)
I attach the applicable xorg.conf
Regards,
Hugo
xorg.conf.nv
in the Debian kernel.
Don't know if it is related.
Regards,
Hugo
On Tue, Nov 18, 2008 at 10:11 AM, Evgeni Golov [EMAIL PROTECTED]wrote:
Hi Hugo,
Never seen that on my systems.
Can you try 0.1.9 from
http://die-welt.net/~evgeni/v86d/v86d_0.1.9-0_i386.debhttp://die-welt.net/%7Eevgeni/v86d/v86d_0.1.9-0_i386.deb?
It's unpatched and compiled with x86emu, so
The only difference I see is that no monitor limits because I had the
monitors turned off.
I run a 2-seat system and normally gdm brings up the 2 monitors, but not
this time: it brought up only one, so I had to restart gdm.
Unfortunately I did not save the Xorg logs of that startup.
Hugo
Package: xcompmgr
Version: 1.1.4-0.1
Severity: normal
After starting 'xcompmgr -c -f' I get many error messages in
.xsession-errors like this:
...
error 182 request 157 minor 8 serial 136701
error 182 request 157 minor 8 serial 136783
error 182 request 157 minor 8 serial 136865
error 182 request
commands cause the error.
Thanks
Hugo Vanwooerkom
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=en_US.ISO-8859-15, LC_CTYPE=en_US.ISO-8859-15
(charmap=ISO-8859
Julien, you're a Godsent. That's it: no quotes.
I'll close the bug.
Hugo
On Wed, Oct 1, 2008 at 10:07 AM, Julien Cristau [EMAIL PROTECTED] wrote:
On Wed, Oct 1, 2008 at 09:39:21 -0500, hugo vanwoerkom wrote:
and the pieces in /etc/gdm/gdm.conf:
[server-Standard]
name=Standard server
I have just noticed I forgot to unload ipwraw module before sending the
report.
Even after removing it from the system and rebooting, I still have the
same results.
iwlist wlan0 channel output :
wlan0 19 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Package: linux-image-2.6.26-1-686
Version: 2.6.26-2
Severity: normal
After installing v86d on sid and installing linux-image-2.6.26-1-686 and
including
video=uvesafb:1024x768-32,mtrr:3,ypan in the kernel cmdline, reboot drops
into an 80x25 VGA screen.
-- Package-specific info:
-- System
, I'd say
you've got problems.
Hugo
kernel images post 2.6.24.
AFAIK it must be a Debian problem then.
Hugo Vanwoerkom
I get the same error with 2.6.26-1-686.
Yet no errors with the kernels from kernel.org.
So I had a thought: recompile the Debian kernel with the .config I use.
Guess what: no error.
So Maximilian was right when he pointed to the .config differences.
It's in the .config somewhere.
Hugo
was wondering if someone with access to a S390 system
could try and build the package (on etch or newer) to check if the
issue is fixed. I'm asking so i don't make the upload a trial and
error procedure. :-)
You can find the tentative version to be upload at:
http://fivebits.net/~hugo/mrd6-build
.
So is it ok to have a .orig tarball and no .diff? Since i keep the
debian/ files in the same repository whenever i package no patch is
required.
Thanks again,
Hugo
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hi Lior,
Like i mentioned before this should be fixed in the upstream source.
However i've prepared the debian package to be uploaded, you can fetch
it from:
http://fivebits.net/~hugo/mrd6-build/
As i said in the previous email, fixing this issue was non-trivial
due to particularities
My throbbers are throbbin'! As the matter of fact, they look better than
those of FF3!
Thanks Mike, great job!
Hugo
On Sat, Jun 21, 2008 at 4:00 PM, Mike Hommey [EMAIL PROTECTED] wrote:
On Sat, Jun 21, 2008 at 11:45:30AM -0500, hugo vanwoerkom
[EMAIL PROTECTED] wrote:
Package: iceweasel
Version: 3.0~rc2-1
Severity: normal
When opening a tab, or reusing one, the favicon of Loading... stays
Package: iceweasel
Version: 3.0~rc2-1
Severity: normal
When opening a tab, or reusing one, the favicon of Loading... stays
motionless.
It rotated in iceweasel 2.
It also rotates using the latest Firefox nightly build and using Firefox 3
RC3.
Regards,
Hugo Vanwoerkom
-- System Information
Package: linux-2.6
Severity: normal
While running linux-image-2.6.25-1-686 and 2-686 I had 3 system freezes in
the 9 days I ran 2.6.25.
I then went back to 2.6.24-1-686.
System halts: there is no kbd, no mouse, vcstime stops marking the time.
Sound loops on the last bytes received, apparently.
I
A workaround to the problem is to use uvesafb instead, specified here:
http://wiki.debian.org/HowToUseUvesafbWithDebian
Hugo
Sorry I did not submit this under linux-2.6
I compiled the vanilla 2.6.25.3 kernel from www.kernel.org and that boots OK
with vga=791, so the problem resides somewhere within the Debian changes.
Hugo
Package: linux-image-2.6.25-1-686
Version: 2.6.25-1
Severity: normal
specifying vga=791 on the grub kernel command line gets 'undefined video
mode number'
in previous kernels that never caused a problem.
-- Package-specific info:
-- System Information:
Debian Release: lenny/sid
APT prefers
Source: lvm2
Version: 2.02.33
Severity: Wishlist
Tags: patch
This patch is needed to support LVM on virtio devices in virtual
machines with virtio support.
Hugo.
Index: lvm2-2.02.29/lib/filters/filter.c
===
--- lvm2-2.02.29
correctly:
table bordercaptionbBUILD HISTORY/b/captiontbodytrtd
colspan=1 align=left
I apologize if this is not a hyperlatex matter but something emacs did.
I attach the entire file that is used with the hyperlatex command:
'hyperlatex this_build.tex'
Regards,
Hugo Vanwoerkom
-- System
Charm her into bed, and hammer her into submission with your massive rod.
http://www.Klipsimples.com/
Learn how to pleasure her
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Try adding in your cfg :
apic=0
acpi=1
It wokrs for me ...
Hugo Segura
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
FuckstickLargeLiliana http://www.Twalveen.com
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
BodypartWhoppingMarguerite http://www.Twalveen.com
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
positions without
having to change any configuration parameters.
This certainly is [OT] to this bug but explains why I am sticking with
legacy grub for the moment.
Hugo
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
We have the biggest selection of purses, watches, wallets, lighters, everything
from rolly, omega, to louis V, Dior and
more... check it
http://ridgest.com
Get it all at one place, LV, Dior, Rolly, Patek, Handbgs, wallets, lights,
anything you can think of we have. come see
for yourself
--
Hi,
Had already asked Lior Kaplan about it, it's on his queue.
Thanks,
Hugo
On Jan 27, 2008 3:32 PM, Marco Rodrigues [EMAIL PROTECTED] wrote:
Package: mrd6
Severity: wishlist
Hi!
Since you're also upstream, please update it and upload it to mentors, to ask
for a sponsor (maybe
On Dec 17, 2007 2:06 AM, Chris Waters [EMAIL PROTECTED] wrote:
On Sun, Dec 16, 2007 at 05:12:23AM -0600, hugo vanwoerkom wrote:
Those are installed:
...
ii xfonts-100dpi 1:1.0.0-4
100 dpi fonts for X
[...]
It would be strange if the standard
with 2.6.23-ck1.
Hugo
On 12/15/07, Chris Waters [EMAIL PROTECTED] wrote:
On Fri, Dec 14, 2007 at 06:51:01AM -0600, hugo vanwoerkom wrote:
ted never opens anything.
the initial picture just stays there.
with new file I get this on the console:
I can't reproduce this. I do see all those messages on the console
appDocument.c(579) ed-edFilename=/home/hugo/try_this.rtf
appDocument.c(752) filename=/home/hugo/try_this.rtf
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.23-1-686 (SMP w/1 CPU core; PREEMPT)
Locale: LANG
Hello.
I am wondering if the problem is just that the script
/etc/dhcp3/dhclient-enter-hooks.d/ntp is in the wrong
place. It should really be in the dhclient-exit-hooks.d
directory so that the script is run after dhcp has
completed initialization of the network instead of before.
Making this
We offer mass sending letters via e-mail service.
Low prices .
Bypassing through the spamfilters.
Contact Information:
icq: 355591743
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
at the latest Sid kernel for i386 + k7. Googled
for the error: ng. Maybe this is of use.
Regards,
Hugo
-- Package-specific info:
-- /etc/udev/rules.d/:
/etc/udev/rules.d/:
total 16
lrwxrwxrwx 1 root root 20 2007-10-17 04:01 020_permissions.rules -
../permissions.rules
lrwxrwxrwx 1 root root 19
On 10/20/07, Marco d'Itri [EMAIL PROTECTED] wrote:
On Oct 20, hugo vanwoerkom [EMAIL PROTECTED] wrote:
Since booting the vanilla 2.6.23.1 kernel that I compiled using the
2.6.22-2-k7 .config file (+the .23.1 additions) I
get the subject error at booting, first when it initializes
,
Hugo Vanwoerkom
-- Package-specific info:
*** BEGIN /proc/mounts
rootfs / rootfs rw 0 0
none /sys sysfs rw,nosuid,nodev,noexec 0 0
none /proc proc rw,nosuid,nodev,noexec 0 0
udev /dev tmpfs rw 0 0
/dev/disk/by-label/ST380211.05 / ext2 rw 0 0
/dev/disk/by-label/ST380211.05
, give it a little while
# to deal with removable devices
if [ ! -e ${ROOT} ]; then
Indeed no solution at all.
Unfortunately it works all the time...
Regards,
Hugo Vanwoerkom
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
/menu.lst then the grub fail loop disappears.
This is when grub is installed as bootloader and you indicate you want
to use it, in Debian Sid.
I submitted exactly the same solution in bug #416092 for mondo
2.20-1.1 back in March. No doubt we'll see this again.
Regards,
Hugo Vanwoerkom
I'm getting this reliably on starting any oo.o tool, both opening
files and simply trying to run the app without a file specified. I'm
seeing it in testing after an upgrade this morning.
I can supply an strace log if that will help.
Hugo.
--
=== Hugo Mills: [EMAIL PROTECTED
Hi Simon,
Thanks for the report. We'll upload a new version soon without this problem.
Thanks,
Hugo
On 5/9/07, Simon Josefsson [EMAIL PROTECTED] wrote:
Severity: serious
Package: mrd6
Version: 0.9.5-rev3-0.1
User: [EMAIL PROTECTED]
Usertags: nonfree-doc rfc
Hi!
This source package
http://i84.imagethrust.com/i/1035853/ooo.png
PHP Arena has the right to change this agreement at any time.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hi Martin,
Indeed, and this was my fault. I confirmed to Kaplan that this
source release included all fixes, but i didn't check this particular
one. We'll upload a new version next week (let's just wait the current
one hits testing).
Thanks for the report,
Hugo
On 4/14/07, Martin Michlmayr
improves security takes place first time
http://img444.imageshack.us/my.php?image=mchd6.jpg
deploy them using Wizard workAn
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
outbursts remote set inclined
http://img444.imageshack.us/img444/2514/lpbp7.png
your Publican Sumner were livedHow any
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Thank you for the report Martin, this issue has now been fixed in the
upstream branch.
http://fivebits.net/proj/mrd6/changeset/1695
Hugo
On 4/2/07, Martin Michlmayr [EMAIL PROTECTED] wrote:
Package: mrd6
Version: 0.9.5-release-1
Usertags: ftbfs-gcc-4.3
Tags: patch
Your package fails
On 3/28/07, Andree Leidenfrost [EMAIL PROTECTED] wrote:
Hi Hugo,
So, you don't have a dual-layer DVD writer, right?
Right.
Does this mean in your opinion this bug report can be closed?
Yes, it should be closed. I was at fault for not reading the FAQ.
Andree, thanks for your attention
On 3/27/07, Bruno Cornec [EMAIL PROTECTED] wrote:
hugo vanwoerkom said on Sat, Mar 24, 2007 at 04:24:58AM -0600:
But when I backup something large, that needs more than one DVD, mondo
behaves strange:
It puts up Blanking DVD, then Waiting for drive to settle, then
says it can't write
' (has it installed) he/she gets that and when a user does not (my
case) one gets nano.
It would seem unnecessary to have to learn 'vi' just because one uses
mondo as a backup tool.
Regards,
Hugo Vanwoerkom
-- Package-specific info:
Patch attached
Package: iceweasel
Version: 2.0.0.2+dfsg-3
It's Hang up when i tring to enter inside this web adress
http://www.adobe.com/go/buystudio
I'm not realy sure if the ploblem is the iceweasel or
the flash player.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe.
---BeginMessage---
Package: iceweasel
Version: 2.0.0.2+dfsg-3
It's only hang up when you try to enter from this direction:
http://www.adobe.com/es/products/studio/
and then click on the link: compre
---BeginMessage---
Package: iceweasel
Version: 2.0.0.2+dfsg-3
It's Hang up when i tring
Package: iceweasel
Version: 2.0.0.2+dfsg-3
It's only hang up when you try to enter from this direction:
http://www.adobe.com/es/products/studio/
and then click on the link: compre
---BeginMessage---
Package: iceweasel
Version: 2.0.0.2+dfsg-3
It's Hang up when i tring to enter inside this
mike
I have version 9,0,31,0 installed from adobe flash player, and esd.
hugo
On Fri, 2007-03-23 at 18:52 +0100, Mike Hommey wrote:
merge 415967 415973
thanks
Please don't send messages to [EMAIL PROTECTED] after you filed a bug.
On Fri, Mar 23, 2007 at 11:10:56AM -0300, hugo [EMAIL
mike:
i did it and with
ICEWEASEL_DSP auto
still hang up, but with
ICEWEASEL_DSP esddsp
the problem dissapear,
thank you very much!!
hugo
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
am up and running.
Regards,
Hugo Vanwoerkom
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
mdadm mdrun lvm2
mdrun:PREREQ=udev_helper
rootdelay:+ PREREQ=
udev_helper:PREREQ=rootdelay
/hdb1/usr/share/initramfs-tools/scripts/local-topSun Mar
04-15:55:08SDA6# exit
Script done on Sun 04 Mar 2007 03:55:34 PM CST
Hugo Vanwoerkom
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
kernel.
But Yaird is another story.
Regards,
Hugo Vanwoerkom
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
then changed the boot parameters to:
vga=791 noapic nolapic
and everything went as expected.
Thanks!
Hugo
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: hercules
Version: 3.03.1-1
Followup-For: Bug #381550
The hercules release in Sid is now more than a year old.
3.04 was released upstream almost a year ago.
Can I help?
Hugo Vanwoerkom
-- System Information:
Debian Release: 4.0
APT prefers unstable
APT policy: (500, 'unstable
the
problem. Now the latest kernel (2.6.19.2) causes no problems
displaying LEDs in X.
Hugo
diff -Naur tleds-1.05beta10-orig/tleds.c tleds-1.05beta10/tleds.c
--- tleds-1.05beta10-orig/tleds.c 2006-10-10 15:20:26.0 -0500
+++ tleds-1.05beta10/tleds.c2007-01-15 08:45:12.0 -0600
,%02d:%02d:%02d.%03ld,area-tm_hour,area-tm_min,area-tm_sec,t0.tv_usec);
+
+ strcat(buffer1,-);
+ strcat(buffer1,buffer2);
+
+d=sprintf(str,%s,buffer1);
+result=str[0];// point to it
+
+ dbugfl = fopen(/home/hugo/debug.doc,a);
+nobytes
,
hopefully an updated debian package will be available after that.
Thanks again,
Hugo
On 1/9/07, Julien Danjou [EMAIL PROTECTED] wrote:
At 1168289040 time_t, hugo vanwoerkom wrote:
Hi Hugo,
I changed the tleds code to get LED display of net traffic in X.
I added an option '-x' that would if used, open the available X
displays and flask the LEDs.
Bug#50842 now into its
.
The diff file is attached.
Hugo
diff -Naur tleds-1.05beta10-orig/Makefile tleds-1.05beta10/Makefile
--- tleds-1.05beta10-orig/Makefile 2006-10-10 15:20:26.0 -0500
+++ tleds-1.05beta10/Makefile 2007-01-08 13:27:21.0 -0600
@@ -22,8 +22,8 @@
# in the source code.
tleds: tleds.c
On 11/25/06, Andree Leidenfrost [EMAIL PROTECTED] wrote:
[Bruno: If you have anything to add or correct, please let us know.]
Hi Hugo,
Would be great if you could cc the bug report. Other than that, thanks a
lot for sending the additional information through! I think I know what
is going
If kernel 2.6.18 ships with Etch and this tleds version ships with it
also then there will be no leds shown in X, as opposed to 2.6.17 where
they do show.
I have entered this bug on Oct. 10th 2006 but the maintainer does not answer.
Be forewarned!
Hugo Vanwoerkom
--
To UNSUBSCRIBE, email
or experience in the field/trade of
their choice.
Give our recruiting office a call when you have time.
Thanks
Hugo Chacon
Office Number: 1-773-509-4920
We hope to be talking to you soon.
*We are taking calls at anytime in the day or evening.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
phil connolly,
Accoring to your previous data, our office can
offer you anywhere from 311K at 6.90% to 791K at 4.08%
www.bugousn.com/16r
Fill out some info instantly recieve your FICO rating.
Negative ratings aren't a problem.
Respects,
Hugo Milton
--
To UNSUBSCRIBE, email to [EMAIL
Package: tleds
Version: 1.05beta10-10
Severity: normal
Under current kernel: 2.6.18-ck1 no leds in X.
Under previous kernel: 2.6.17-ck1 OK leds in X.
Same tleds package.
This is in xorg.conf:
...
Section InputDevice
Identifier Keyboard0
Driver evdev
#
Subject: bindgraph: fails to generate graphs
Package: bindgraph
Version: 0.2-5
Severity: normal
bind9 is running and /var/log/bind9-query.log contains:
...
22-Aug-2006 18:44:02.313 client 127.0.0.1#32889: query: mail.att.net.mx
IN +
22-Aug-2006 18:44:02.314 client 127.0.0.1#32889: query:
I forgot to mention in the original report that I applied the patch of
#375237
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Do not ignore me please,
I found byour email sbomewhere and now decided to wribte you.
I am coming to your place in few webeaks and thought we
can meet each other. Let me know iaf you doa not mind.
I am a nice pretty girl.a Don't reply to this email.
Eamail me direclty at [EMAIL PROTECTED]
I see this problem, too. Installed (via cdebootstrap) an Etch
system last night, upgraded to Sid, and I get precisely the error
message given above. I don't know if the system.d directory ever
existed and was deleted at some point, or was simply never created.
Hugo.
--
=== Hugo Mills
Package: cruft
Version: 0.9.6-0.4
When cruft is run on a Debian Sarge system with ~4000 packages installed
it generates the following error:
./dpkg: line 3: /usr/bin/sort: Argument list too long
and then reports an extremely large amount of cruft.
The problem appears to be in the
Package: libarts1c2a
Version: 1.5.3-1
Severity: normal
Using Konsole under fvwm, no KDE.
After a minute or so message pops up: Sound server fatal error: CPU overload,
aborting.
It keeps happening when you hit OK.
Linux debian 2.6.16-ck11 #1 PREEMPT Fri Jun 2 05:31:12 CDT 2006 i686 GNU/Linux
this is vaguely useful. Let me know if there's anything more
I can do to help get Xtightvnc working on amd64.
Hugo.
--
=== Hugo Mills: [EMAIL PROTECTED] carfax.org.uk | darksatanic.net | lug.org.uk
===
PGP key: 1C335860 from wwwkeys.eu.pgp.net or http://www.carfax.org.uk
--- Jenkins
In fact, forget all about that. I've just found a patch to fix this
issue in the Gentoo bugzilla:
http://bugs.gentoo.org/show_bug.cgi?id=82583
Applied, compiled, tested, and working.
Hugo.
--
=== Hugo Mills: [EMAIL PROTECTED] carfax.org.uk | darksatanic.net | lug.org.uk
===
PGP
Package: apache2-mpm-worker
Version: 2.0.54-5
Severity: important
mod_autoindex doesn't list folders containing .htaccess
files whose subrequest returns 401 or 403. It seems that this will be
a feature since in versions after 2.1.1 there's the option
ShowForbidden for the IndexOptions directive.
:
Reboot fails with 9's all over the screen. Both with Grub and with Lilo.
Regards,
Hugo
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
/ccwgroup/drivers/qeth/group
pre-up echo 1 /sys/devices/qeth/0.0.0700/online
Hugo Monteiro.
--
ci.fct.unl.pt:~# cat .signature
Hugo Monteiro
Email: [EMAIL PROTECTED]
Telefone : +351 212948300 Ext.15307
Centro de Informática
Faculdade de Ciências e Tecnologia da
by instead with:
Defaults env_reset, env_keep+=DISPLAY
Thanks for the reply, appreciate it!
Hugo
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
= !env_reset
nor
Defaults:ALL !env_reset
enabled the user to use synaptic.
Regards,
Hugo Vanwoerkom
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: sudo
Version: 1.6.8p7-1.3
Severity: normal
Hi,
Using this version of sudo with synaptic gets:
(synaptic:17753): Gtk-WARNING **: cannot open display:
That did not happen with the previous version 1.6.8p7-1.2
Regards,
Hugo Vanwoerkom
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
Hi,
I apologize, I saw the security announcement too late that the
environmental variables usage was altered.
The bug is a user error.
Regards,
Hugo Vanwoerkom
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: wnpp
Severity: normal
I intend to orphan the wmtop package.
The package description is:
wmtop maintains a view of the 3 top CPU (or memory) consuming
processes displaying the amount of CPU used as a horizontal bar.
Very useful for spotting those rogue Netscape processes!
-- System
Adam Kropelin wrote:
Samuele Giovanni Tonon wrote:
hi,
i received a patch for example/client.c file .
with this patch the example can be compiled without any problem.
Hugo Vanwoerkom was the author of the patch, please include it on the
main branch .
here's the url of the bug and in attach
Adam Kropelin wrote:
Hugo Vanwoerkom wrote:
Adam Kropelin wrote:
Samuele Giovanni Tonon wrote:
hi,
i received a patch for example/client.c file .
with this patch the example can be compiled without any problem.
Hugo Vanwoerkom was the author of the patch, please include it on
the main branch
out the problem.
I came across the problem when I was trying to nicely comment
the /etc/apt/preferences file.
The command apt-get update works normally for both cases.
As far as I can tell, the bug remains, regardless of the contents
of the /etc/apt/sources.list file.
Salutations,
Hugo Graumann
Thanks Samuele.
If I can help with anything, let me know.
Hugo
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
,
Hugo
===
--- client.c2003-11-26 09:54:46.0 -0600
+++ do_apcups_client.cpp2005-12-25 07:33:12.0 -0600
@@ -17,15 +17,34 @@
* For additional examples of code, see cgi
Package: installation-reports
Severity: important
Boot method: CD
Image version:
http://cdimage.debian.org/cdimage/daily-builds/etch_d-i/beta1/i386/iso-cd/debian-testing-i386-netinst.iso
Date: 12/08/2005 10:00 CDT
Machine: PC
Processor:AMD Athlon Thoroughbred XP 2700+
Memory: 1GB
Partitions:
501 - 600 of 640 matches
Mail list logo
